I just put a new one in our 30 hp and your video made it a breeze. Thanks for posting.

Thanks….I needed to see this video…….You saved me a fortune….

@fishmanroly7450

Жыл бұрын

Glad I could help

You didn't show setting the impeller into the housing, clockwise or counterclockwise?

@fishmanroly7450

Жыл бұрын

It doesn't really matter which way you put it for my experience as soon as you put your outboard in gear it's going to flip them the right way

Thanks for posting this. Seems i can handle this with help from your video. Also, I wondered what kinda gasket sealer and grease did you use? I've never worked on a boat motor, bought my etec 25 used, it runs great, and learning as I go.

@fishmanroly7450

3 жыл бұрын

Hello i used regular water pump sealant from the auto parts store. As for the grease any that u have on hand will work.

@ronghoward

3 жыл бұрын

The service manual calls for 3M 847 but any non hardening gasket sealant will work. Permatex 80017 is a good affordable alternative

@braylenkorbyn9267

2 жыл бұрын

you all probably dont give a damn but does anyone know a method to log back into an Instagram account? I was stupid forgot my login password. I would love any tricks you can offer me

@zakaimakai1367

2 жыл бұрын

@Braylen Korbyn instablaster =)

@braylenkorbyn9267

2 жыл бұрын

@Zakai Makai thanks so much for your reply. I got to the site through google and im waiting for the hacking stuff now. Seems to take quite some time so I will get back to you later with my results.

Good informational video..but you did t really show us anything how to put the pump together

@andresanford9100

2 жыл бұрын

I agree, didn't show setting the impeller

First time changing pump on my new to me etec. Having a hard time getting lower unit to drop all the way on my 2018 30hp etec. Upper bolt is loosened on shift bar but only drops about half to 3/4 of an inch and stops advancing furthet off. Shift lever on tiller is in neutral. Any advice on what i may be doing wrong or could be stuck???? Engine is mostly flawless as far as corrosion.

@fishmanroly7450

3 жыл бұрын

Sorry for the late reply did you try taking the nut out for the shaft connector

@trebblej

3 жыл бұрын

If you pull the drive shaft out, should gear oil come up?

@ThanhTran-cl6cd

2 жыл бұрын

What is the solution to your problem? I currently have similar problem on my 2014 30hp,

@rollingrecords9019

9 ай бұрын

Anyone get it figured?

Do you have the part number for the upgraded pump kit? I've been using the old kit and would like to try to the new one. Thanks!

@fishmanroly7450

3 жыл бұрын

Johnson Evinrude OMC New OEM Water Pump Kit, 5008972 ebay

@johnbustamante3817

3 жыл бұрын

Thanks!

@jeffalden6769

3 жыл бұрын

Was the etec going into s.a.f.e. mode? I'm taking mine apart in a couple minutes. 2015 25hp my motor was shutting down into safe mode.

@fishmanroly7450

3 жыл бұрын

@@jeffalden6769 yes an unfortunately it still is i even replaced the poppet valve. I need to find a marine mechanic to hook up the laptop and see what's going on.

@jeffalden6769

3 жыл бұрын

@@fishmanroly7450 I got mine done tonight. Hope it cures my issue. Impeller had alot of memory. I did see the impeller and spring kit paperwork said 2010 and older replace the 2 springs included in the thermostat housing. 2011 and new discard the springs and only change impeller. The springs were causing overheating in older models

Well...yah..your torque wrench goes click! But as what setting ? Important part you led out

@fishmanroly7450

Жыл бұрын

I don't use a torque wrench as you can see in the video I was just joking just tighten until it stops and give it half a turn

Did that packet of grease come in the pump kit?

@fishmanroly7450

2 жыл бұрын

I'm sorry I honestly don't remember if I had it on hand or it came with it just put Marine Grease if anything.

@AAE-cg1il

2 жыл бұрын

@@fishmanroly7450 Thanks….I have plenty of the blue Evinrude stuff…..

@AAE-cg1il

2 жыл бұрын

@@fishmanroly7450 for those that wish to know…..you do get the grease packet with a water pump kit. I got my water pump kit in he mail and replaced it yesterday. I was nervous about doing it u til I saw this vid. Again…..Thanks.

@fishmanroly7450

Жыл бұрын

​@@AAE-cg1ilglad to help😊

I have a 06-09 e-tec 25hp would that same part # work on mine

@fishmanroly7450

Жыл бұрын

I can't say for sure you might have to do some research first.

Good for you next time show more details like how the hell did you get that impeller with the key in there, this wasn't helpful at all

@fishmanroly7450

Жыл бұрын

Will do

@fishmanroly7450

Жыл бұрын

Use a little bit of grease to keep the key in place sorry I'm a truck driver not a videographer I just make some short quick videos to help the people that it can help.

Worthless never showed how to remove and replace pump, mpeller or even what type of gasket sealer you used. ,

Wasted time, you skipped the most important part

@fishmanroly7450

Жыл бұрын

I apologize like I said before I'm a truck driver not a video guy. There's plenty of videos on KZread but none of them showed how to separate the lower unit from the motor that's why I made this video all you have to do is loosen the top screwed behind the screen and the changing the impeller is pretty basic.

What a waste of time...in info on the impeller...wtf?

@fishmanroly7450

Жыл бұрын

Water pump kit 5008972 is the updated kit