You can sense the tension of 2 master engine builders talking shop on how each personally works and gets it done. Love it.

Yes, Hagerty. Much, much, MUCH more of this kind of content.

Grabbing a beer and sitting in the hot tub for the next 1 hour and 8 minutes watching this, the Timelapse was incredible as always 👌

@JjNorf

Ай бұрын

Beat you to it.

as a bmw tech. the new engine is no longer honed cylinderical (its tapered). they called it form honing, which greatly reduced thermal distrotion at tdc and already reduced friction at bdc. also the top rod bearing ,they use irox coating for msa stop and go, which supply lubrication when engine is stopped . its coated red.

@MMOchAForPrez

20 күн бұрын

Steph actually mentioned the start/stop rod bearing coating before in his B58 VS 2JZ video, if I remember correctly. He said they were not thrilled with the reliability at the power levels and rotating speeds they run around the track, so he switched to a rod bearing without the coating. Pretty interesting stuff

@gothicpagan.666

5 күн бұрын

Different requirements, it's the same difference as with the Vandervell vp2 brg. and something like Glacier tin alloy. Especially if they are running on a tuftrided or Nitrided crank. The Glacier will ultimately take more load, where as the Vandervell will take more damage and tolerate contamination to a far greater degree

@SavageBunny1

3 күн бұрын

Those bearings feel almost like silicone, it feels weird.

Yes yes yes! Two of my favorite people in one video! Much love to Papadakis.

Gotta agree with papa.. 80’s 90’s Japanese service manuals were the BEST!

Love this, Papadakis with the zero BS! Saying what doesn’t matter at all, which I agree with. So much is stories, and like he says, unless it’s proven to him, he ain’t doing it. ❤

It is stuff like this that reminds me, constantly... that I made a wrong career choice. Thank you Stephan and Devin, you guys are Masters!

13:00 brilliant discussion on torque, torque error and stretch. F=KX, K = Modulus of elasticity, X = stretch.

funny how an hour ago i was just rewatching the entire b58 engine series on Papadakis channel.

Stephan Papadakis is an amazing engine builder. Love watching a modern build with a true expert.

Love how bmw is responsible for one of the best boosted inline 6 platforms around currently. As someone who boosted non turbo m5x/s5x engines in the early-mid 00s this makes me happy. Funny thing is we were the first to make 1000whp with a m52 back in like 2007 and that was like untouchable power. Nowadays thats normal.😂

11/10 episode!! Knocked it out of the park with this one gents, more episodes like this please!!

The thumbnail says Papadakis but the channel says Hagerty. Couldn't click fast enough 1hour. Glorious

@pilotboy217

10 күн бұрын

Oh man go beat off to the thumbnail too why will ya

An hour of video and I didn't scroll a second.Legends

To think that my engine was rebuild with around 70% of precision shown here and it still held over 1000hp reliably for 2 years (now killed it with stone through oild radiator 😢). I run grandfather of B58 ... N54! I learnt a lot for my rebuild from first B58 engine build Papadakis did on his YT few years back - a goldmine of knowledge!

Love how they took it from the engine clean room all the way to FD Long Beach. Great video guys.

1 hour of a Papa masterclass, OK Hagerty, I'll bite.

stephan is the GOAT

This was even better than I expected it to be. More uploads like these, please.

When I started the video I thought that I didn’t have time for an 1 hour and 8 minute video but I was wrong. Once I started I couldn’t stop. I enjoyed every minute and want to thank everyone for the production. Great job.

Awesome collaboration. Thank you Papadakis Racing

Just incredible and informative! They are truly masters of their craft!

Kind Regards from Germany ✌️ Love it👍

Love this so much, thank you @hagerty. Stephen P is so great at teaching, these longer well explained KZread videos are so refreshing compared to a lot of other “car KZreadr” crap

Thumbs up for *Davin* being such a gracious host.

This is petrolhead gold 🏅 Thank you guys! 🤩

If Steph says “good enough” is good enough, then there’s no question.

What a great ending. Many thanks for making this sort of content.

The break in oil question and his reaction were fantastic! Do remember he is going to have spare engines sitting ready to go. They don’t have time to break it in after rushing to put one in. Fill it full of fluids, and treat it how it’s going to be and he’s trusting it will be right and ready out of the gate. Both cars on his team are running this engine now so it’s been proven as much as it can but all of the big teams are like this.

I gave this dude a thumbs up as he was roamin around formula d and this dude gave one me back I almost died. My buddy got a picture with him but still what a god among men yknow

I've been watching Formula Drift and other drift leagues for years, and Papadakis is pretty much the highest standard around the world for engine builders in drifting. Rarely do you ever hear of mechanical engine isssues with their built cars. After watching this video, it's clear why that is with how meticulous the engine building process is.

One wonders how much slop finds its way into the factory setup and how much more reliability is achieved by this kind of attention to detail. Close enough ends up being sufficient but seeing what can be achieved is really eye opening! Thank you

Honestly id love to see papadakis do a crazy na straight 6 w his wild exhaust/intake setup

Dude. Yes. Thank you, Hagerty.

Great video, thank you guys!😊🎉

Modern top notch engineering meets old school engineering.

Masters. What a great video. This is historical.

19:08 i wonder if thermal expansion has something to do this more than torque load.

So kinda like a crush washer for the cylinders. Beautiful engine

Another cool source of engine building info wascwhen Steve Dinan was on 'The Smoking Tire' Podcast a few years back. Talked about building the V8 for the BMW prototype cars and what it took to get the extra power while working within the rules.

This is therapy for Davin after the stress-inducing Subaru rebuild many months ago. 😂

Wow wow wow very good inf what a monster

@AdinSLaboy

Ай бұрын

I downloaded this one and save it to my favorite videos

Hey Davin and Hagerty, what if You do a GoDevil Engine from a Willys Overland M38 ?! To make old Hero running smoothly again 😃 Great motor builds Guys!

These are the types of videos that are food for a gearhead's soul.

16:40 a Twist-Ease 0.5, a man of refined taste.

Amazing content!

Great video, With these new alloy blocks with the sprayed on liners how does a normal machine shop bore and hone them?

B58 is a fantastic motor, both stock and to build up on.

i love hagerty for this one.

His theroy on the bore is probabu just how the tool operates to be fast. It is within spec so its not an issue.

Some of the topics they talked about, especially about block taper etc, would be super interesting to get something like a bmw engineer in to, if nothing else, explain why seemingly all blocks have tapered bores.

A proper engine build. Love seeing Davin and Stephan nerding out. Couple of questions: In the same engine family of the B58 you have the more sports oriented S58. Why is the S58 not used for this application? Also Toyota has a very sturdy 3.5 V6 on the shelf. Why is that one not selected? Also surprising to see a manual gearbox in a drift car. Makes it a long drivetrain for a initial FWD car, makes lovely inline 6 noise though. Keep up the good work.

@rsjet

Ай бұрын

B58 because it's still a Toyota product (since it's used in the Supra) while S58 is not. For your second question, I'm guessing either the Toyota V6 can't make that much power reliably and/or size constraints.

@TML34

Ай бұрын

@@rsjetthe B58 is 0% Toyota, other than it sits in the engine bay of a Supra, which is also a BMW. Toyota didn’t manufacture a single part of a B58.

@iuranescitcuria

Ай бұрын

I was also wondering why they don’t use the S58 instead of the B58. Well the B58 is a great engine anyway.

@rsjet

Ай бұрын

@@TML34 Of course it is made by BMW, but it's put by Toyota in their car and even has a Toyota part number for every part. If they are trying to use Toyota parts, the Supra B58 is fair game, but the S58 is not.

@Leofred2000

Ай бұрын

I doubt Toyota would sponsor them with the S58 since its not in their engine lineup (yet?)

loved this video.. more tech talk plz..

Finally waiting for Papa!

I love these engine build walkthroughs. I don't even build engines.

I hope to never have to tear into my B58, but sure enough I had to set one hour apart to watch this masterclass.

In relation to if manufacturers use a break in oil i doubt it. When we do a pre delivery inspection the oil level is always on the low mark just to save money .

Can't wait for a 7MGTE build.

The more I see papidakis talk about the b58 the more and more I want to swap one in my car, they are really good motors…especially on the Toyota side we haven’t had any come to the shop with engine issues…

Awesome content

Best efficient design inline cylinder layout . Only one better is odd number cylinders 5 or 7 cylinders

VERY VERY COOL,LOVE IT 😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎

I'd take a guess that with the FEA they've run, the taper is probably due to the way the thermal properties (ie. distribution of temps) are around the block at operating temps (ie. top/bottom may run hotter/cooler than the alternative end due to things like the coolant/oil gallery design or even thermal mass of the block). As a result, there's probably a transition in terms of how much the bore expands across it's distance/length, so they're likely just accounting for that transition... ie. the tapered machining may result in the bores actually being pretty uniform/round at operating temps, across the length of the bore (TDC to BDC).

Hi It's cool to see a bmw engine rebuild.

I think we all wish we could have Papadakis build our engines.

🔥🔥🔥

super cool

This video reminds me of an old Hot Rod Magazine article "Know Your Enemy" I believe by David Freiburger. The quote went something like, "We have heard of guys squeezing 1000 hp out of their Supras but if you spent that much on a Rat (big block Chevy), you'd be capable pf spaceflight."

Kind of Video that you get chance to reinforce the appreciation of Combustion Engines

24:40 total seal is awesome

Well said Steph! the people that still tell customers to break in an engine on some special oil, could be using sub par machine shops. also the break in tunes! LOL

Did you weight pistons before putting them into the block?

I always wondered, by putting the bearing thicknesses offset one big one small aren't you offsetting the crank ?

Interesting about the torque plate and distorted cylinders

In-line engines are sexy.

@iuranescitcuria

Ай бұрын

I love those engines!❤

Tremendous video. Thank You

You Are All Crazy Guys, I Love Toyota

How is the balance in the car comparing 4 vs 6 cylinder engine ?

I’m looking for a rwd early yazuka chrome like the yazuka scarlets or old jdm race cars and 911s any recommendations I’m by Spokane Seattle area

PAPADAKIS lets gooo

Davin specialist V8 engine anda papadakis specialist B58 engine 🔥🔥

What are the best platforms for buying old race cars from Japan or crate motors to take apart or do you recommended to take it apart my step dad is older stelantis but he doesn’t wanna do to much like turbo ish or like anything best 500whp but he has forums and freinds and stuff

Kinda surprised we aren’t using lasers to get accurate measurements for clearances/ tolerance. Nothing wrong with taking measurements the old way and maybe it’s just not worth the price but at this level of performance I would think it would be somewhat more beneficial. Could also better account for wear at end of race season.

@Leofred2000

Ай бұрын

Maybe cuz its Formula D and not Formula 1, meaning the money and the need for research is there imo

I just want to know what torque wrench he’s using!

19:00 I wouldn't be surprised if that's true. FEA has come a VERY long way in just 20 years - OEMs can DEFINITELY account for this kind of distortion and reverse-engineer it into the CNC program quite easily nowadays, IMHO.

The break in oil is actually able to bind to the metal chemically, intermolecular forces i believe. So the wearing that is happening initially is a microscopic chemical wearing, not as much mechanical wear I believe. Probably still not that necessary 100% of the time like you said.

This is remarkably similar to an M54 from 20 years ago with all the BMW special alignment tools lol

Saludo de puerto rico👍👍👍👍

Dom!!

What product was he dabbing on the head nuts before he torqued them down? White bottle with blue label? Subbed and belled!

@jamiem9849

28 күн бұрын

I looked it up and the bottle seems to match ARP assembly lube.

@jefflamb5343

4 күн бұрын

In the video, he said he uses the CP Carillo assembly lube because it has given him better results than the ARP assembly lube

Dom Spec. Ruler!

Ownership. This is when you can't help but be yourself.

really great content for us engine nerds.. lol

if you mix a standard and an undersize bearing shell, wouldn't that be (ever so) slightly egg-shaped?

@jimmyaber5920

20 күн бұрын

The shells are oil distributors and the miniscule difference in std and plus or minus increment shells is so slight. There are many engines manufactured with selective fit mains. The old way was to make accepted clearance wider to reduce scrapping loose spec parts. With size range shells you can make up for blocks with honed bearing openings and crank journals that needed more polish finish to get acceptable journal dimensional quality. The selective shells allows the oil clearance to be optimal and not throw away blocks and cranks. Most main bearing fails wreck the crank and block and the extra work selecting bearings from a more expensive bearing kit is very rare, a new engine is installed.

b58 swap is the new 2jz swap

What ever happened with the Pantera?

Specs are just specs, the type of oil you use is goes with the given tolerances you use

Oil gallery guys, not oil galley. Just my ocd flaring up 😅 as engine builders who pride themselves in paying attention to the details we should by now in 2024, know that it is called oil gallery.

That’s not the only BMW motor with that taper. They gotta be doing it on purpose.