No video
Every CAD Designer Should Use This
Using a 3DConnexion SpaceMouse with Solidworks.
The 3DConnexion SpaceMouse Enterprise and Solidworks are examples of many technologies that we offer at CAD Micro.
See how you can improve efficiency with Solidworks here: www.cadmicro.c...
Shop the 3DConnexion SpaceMouse Enterprise here: shop.cadmicro.com
Learn more about the solutions we offer by visiting our website at…
www.cadmicro.com
#engineering #cad #solidworks
Пікірлер: 142
I work at an aerospace engineering firm, and most of the engineers have these. One of them even has a laptop with one built in!
@colin1567
Жыл бұрын
Halo g502 better
@colin1567
Жыл бұрын
Sorry
@noahnymous
Жыл бұрын
bro that not even funny just cringe
@Zane-It
11 ай бұрын
How do I get one?
@radheshyamsawalakhe5051
9 ай бұрын
Bro name of firm?
These things are fire once you get used to them
@karmanov2004
7 ай бұрын
Мне незашло.
@troyyort954
28 күн бұрын
@@karmanov2004don’t comment
The amount of people commenting that this or that type of mouse is better are not really getting it. You don't use this INSTEAD of a mouse - you use it WITH a mouse; using the 3D controller with the left hand and your mouse with the right as usual. Stops you needing to use the scroll wheel on your mouse to zoom and pan about within the drawing. Also, once the buttons are set up as you want, it reduces the need to move your hands to the keyboard. Had an old Space Explorer until it stopped working with Windows 10 and recently got a SpaceMouse Pro from Ebay (a lot cheaper!). Awesome piece of kit, but I agree that it takes some getting used to.
@MassimoMerolla-mm4rf
2 ай бұрын
What's wrong with the mouse wheel tho?
@WildMike1234
2 ай бұрын
@@MassimoMerolla-mm4rf mouse wheels are okay but the constant rolling up and down can lead to strain. Particularly if, like me, you suffer from RSI. The 'puck' used to zoom on the 3D controller is far more intuitive, much quicker and can be used in unison with another command. I've been using one for many years now and I wouldn't be without it.
@MassimoMerolla-mm4rf
2 ай бұрын
@@WildMike1234 Thanks for the thoughtful response, I'm looking forward to learning more CAD and pushing my skills in it again and getting paid for it
I left mine at work once and my coworkers the next day were mind-blown zooming in and out of all my models although they didn’t have the magic touch so things kept flying everywhere 🤣
@austinharding9734
3 ай бұрын
personally I found it very very hard to get used to, it definitely takes alot of practice after you tweak few settings like some axis inverts, sensitivity
@LambVisionStudios
17 күн бұрын
I need a job
@zoobeiden
13 күн бұрын
what is this called ??
I have the same model shown in the demo, and it took less than a week to get used to but, i feel naked without it, after about 3 years of using one. 10/10 would recommend.
Got the enterprise edition a year ago, prohibited myself from touching the keyboard till I got the hung of it. Still can't compete with how fast you can get things done with a keyboard.
@panan7777
7 ай бұрын
@@jadesisk1852 I put a big cardboard and and printed a sheet with all commands. In a couple of weeks you can get blazing fast. In SWorks, shift + key for parts, Ctrl + key assembly.
@kickskii
4 ай бұрын
@@jadesisk1852 the main appeal is the navigation, this this is 3d navigation on drugs like holy crap it is so amazing to use the spacemouse enterprise for creation work
@timg8257
2 ай бұрын
Wait really? Keyboard is faster?
Myself and several of my coworkers just got a bunch of these, and while there is certainly a learning curve, it is AMAZING once you get used to it. Two of my coworkers don’t really use them, since they never got the hang of it, and are comfortable with standard pan/tilt controls. I took about an hour to start to get a feel for it, and can now confidently use it. It’s probably not technically much faster than a keyboard and mouse in Fusion 360, but it is SO much more fun, and DEFINITELY makes CAD more enjoyable and intuitive. Maybe not an absolute necessity for mechanical design, but I imagine this would be a game-changer for more artistic applications such as 3D animation.
I bought one 3 weeks ago and I use it for designing my humanoid robot. It is super smooth and takes some getting used to.
Well I have using 3D mouse at my office. It is useful for viewing big assemblies in visualization software. I generally use to view and understand when I open the entire tractor assembly which we call E BOM on NX visualization it is faster and easier to zoom and rotate things easily but while modeling I prefer my traditional mouse.
That's been on my wish list for two decades now. It's probably about time I check that one off.
my dad has a 360 spaceball mouse from 1999, not really a new thing and not really a need but is cool.
@Breizhoo
Жыл бұрын
I had Spaceorb 360 in 1996. Fine with Autocad , 3dsmax and ray tracing.
@HoNau77
9 ай бұрын
It depends on what you are doing for your living if you need one or not.
Or you just become a master at spinning the part with the middle-mouse button really quickly or just barely and are able to view the object in your head in different orientations and have your fingers in an almost gamer setup, palm on the CTRL key, pinky on the Shift and other fingers ready to hit hot keys.
@WiinoGP
8 ай бұрын
And have a fracture due to repetitive movement
@panan7777
7 ай бұрын
Made 16 hot keys with crtl and shift and enter and esc on the mouse on the left part of keyboard. Only numeric on the left side would need to be added. Lightning fast work.
@dooby1445
7 ай бұрын
@@WiinoGPYou’re not going to fracture your fuckin fingers because you press a keyboard key over and over.
This was forbidden in most companies I worked for in Germany for the simple reason that you are not able to work once you get used to it and don't have one. E.g a coworkers computer
@HoNau77
9 ай бұрын
WTF. Would be my first and last day in that company.
@saam4312
9 ай бұрын
same
@NotRobert-sd7fy
8 ай бұрын
That's a bit extreme. I have to use AutoCAD on touchpad sometimes and the navswheel helps but without it it's unusable without a mouse
@clementc7297
8 ай бұрын
@@NotRobert-sd7fy exactly. That's the point!
@NotRobert-sd7fy
8 ай бұрын
@@clementc7297 not really, I wouldn't go making everyone use a touchpad, or enter the coordinates by keyboard. I don't see myself using something as big as what's in the video though so I'd be inclined to agree
Develop an etch-a-sketch set up for drawing tool.
The space mouse is heaven sent for sure
I love my space mouse
What is that keyboard/mouse called ?
this 3D connexion is useful , but costly as well for individuals, you can configure a simple joystick as a alternative for 3D and CAD works
I got this on my workstation!😂 This device kinda funny
I keep tellin' 'em. I turned a few onto it my last contract.
Great for spinning parts and acting like you're busy
" I shall not betray the holy gamer mouse "
What is it?
@chestikof8665
Жыл бұрын
over priced is what it is
@Kaskets3D
Жыл бұрын
Expensive mouse
@robrift
Жыл бұрын
It's overpriced trash
@AdnanVickey
11 ай бұрын
its a 3D connexion, to zoom rotate drag a part without mouse
@mattmurphy7030
10 ай бұрын
@@robrifttrash if you're poor. Genius if you have a decent job
i love mine and im not using a 3d package without this
I've got a double axis joystick. Would be better!
would love to recreate it to a more affordable version tho, just would wanna know is that a rotary encoder, a joystick module or a 5 way hatswitch?
I dont useitbecause then I would be lost without it. Keyboard and Mouse is everywhere available.
Wait, do you use this in place of a mouse? Or just for viewing? Ive never used one before!
So...... What is it called?
that is a controller for orientation! funny!
where can i buy this
So what’s this model called?
I m using everyday in office 3d connecxian
Here is the name I found in the comments below: 3D Connexion Space Mouse
What kinda salary you making doing this? Thinking of a career switch
Can I get a link to purchase
Those things are great once you get used to them.
I can’t get use to mines I’m still using a track ball
The only problem is that they are 400 dollars
📌inventing on principle by Bret victor
Must be new to designing lol, these are everywhere at almost any office where designers work
Screw this thing. Bought one and it started moving my model when I wasnt touching it and deleting and overwriting changes. Took a good while to figure out it was all because of the fancy new tool I just got.
@richardhall5489
2 ай бұрын
Thanks for that. My too smart logitec mouse has started doing something similar.
just put it in dominant mode
yeah, if you are working on one model whole month-maybe, if you are producing like 20 a day, waste of time. Macros, tons of shortcuts and workflow. That's all you need. And let's be clear: some of the enterprise features are not working in Solidworks, buttons are positioned in weird way, no lighting on pad, no sketch commands on function keys. Waste of money
@WAMSMASHES
6 ай бұрын
Yeah. Just buy the bit you need. That things shit and well over priced
Yeah... I wouldn't ever pay the 2k they cost. Yet I do use it (I made my own with a cheap knockoff arduino, some joysticks, and some "broken hopes and dreams" powder, aka: so much work I almost fell into depresion again)
What is the music?!!?
What is the name of this device??
I see lots of videos of people spinning and panning... usually right off the screen. But never someone using one of these to actually get work done faster. Can anyone point me to a video of someone actually getting work done more efficiently?
@mattmurphy7030
10 ай бұрын
Spend 10 minutes working with large assemblies and it's paid for itself already
Music?
Use what?
How much it cost?
I can do the same with my mouse no prob
For me it's cool but not practical. I use only the turntable view (Z axis always up). It's easier on your brain
@mattmurphy7030
10 ай бұрын
Skill issue
What's the name of this device please?
@CADMicroSolutionsInc
5 ай бұрын
This is the 3Dconnexion SpaceMouse Pro! Shop the full range of 3Dconnexion space mice here: shop.cadmicro.com/collections/3dconnexion-mice
please answer me what is this
I work way faster with mouse and keypad tho. Never seen anybody model faster with these.
Hav you tried the magic track pad for macs? Waaay better than this.
@Valenslays
2 ай бұрын
Macs don't have AutoCAD
@minato450
2 ай бұрын
@@Valenslays check again and let me know.
What is it called
@mattmurphy7030
10 ай бұрын
3D Connexion
What is name of it
@AdnanVickey
11 ай бұрын
3D connexion
Wanna tell people what it actually is?
You know it's completely useless when every other job sector that utilizes 3d viewports don't use interfaces like this. They simply use a mouse/pen and a keyboard
@mattmurphy7030
10 ай бұрын
You know it's not useless if you spend 10 minutes working on large assemblies at a real job
@bobsteven2363
10 ай бұрын
@@mattmurphy7030 idk man, can you really make the argument that working on large assemblies is a real job, but working on a multi billion dollar industry where you need to manage millions of moving parts simultaneously isnt?
what is this
Costs as much as a second low budget PC.
@mattmurphy7030
10 ай бұрын
They make an affordable version that's just the mouse without all the buttons. And stop buying garbage tier PCs
A mouse will suffice
Is that even real
Need
What's the name of this please
@ChrisLee-ey6ue
2 ай бұрын
spacemouse
nah!
Gimmick Gadget?
Can do same shit with my mouse i can assure you. Also faster.
no
Still think my mouse is faster
Hate these things Its what crappy cad softwares like inventor require because they are so hard to use
@arturoreyes9420
10 ай бұрын
Qué programa recomiendas?
@mattmurphy7030
10 ай бұрын
Skill issue