This is very helpful. Thanks for sharing the process! I'll more then likely watch this video a number of times.

@instinctiveaddictionarcher8998

3 жыл бұрын

You’re welcome brother thanks for watching 👍🏻

Great choice on the Magnus

On another note… I had an issue still with the durability of my .204 shafts after adding the ethics system. When I would hit something hard, the nock would fly out of the shaft and split the nock end of the shaft. Ethics also sells a nock adapter. In the .204 shafts, you have to shoot a “G” nock. With this component added, There is nothing tougher! BTW, Great videos!

@instinctiveaddictionarcher8998

3 жыл бұрын

Yea a nock collar or adapter works good for that situation no doubt, probably why gold tip uses them on higher end arrows

What’s your draw length and the shaft length cut to for the 50lbs bow?

What length are you cutting your arrows to? I also have a 27 1/2 draw. I was also hoping to get around 225-300 grains up front for my 50# recurve. Currently shooting 500’s at 30” but with no significant weight up front. I have a set of brass 100 gr inserts and a set of gold tip traditional xt 500”s ready to cut, fletch, and assemble. I just didn’t want to burn up components if I’m going to be under-spined.

@instinctiveaddictionarcher8998

3 жыл бұрын

Around 29-29 1/2”

We're can I get those collars for outside shaft,,little note I have been using 222 brass over my tips for over a year pretty much indestructible but one issue hard to pull out of three d targets, but for stumps I never Crack tips anymore.

@instinctiveaddictionarcher8998

2 жыл бұрын

Ethics Archery or 3rivers 👍🏻

Do you notice any penetration differences in the four vs two blade ? I’ve shot the four blade for several years out of my compound with great success on elk but I’ll be trying my luck with a bear montana this year .. wanting a satori but I haven’t found a 19” riser just yet . Also looking for a recommendation on a string for the montana Love your channel !!

@instinctiveaddictionarcher8998

3 жыл бұрын

Two blades definitely penetrate more 👍🏻

@WranglerRider3

2 жыл бұрын

Bears are much softer than elk so if you're doing well on elk with the 4 blade, no need to go 2 for bear

@josephtreadlightly5686

Жыл бұрын

Never under-estimate wound channel. The difference between an excellent & so -so blood loss. I have a 640 grain arrow build with a steel/carbon hybrid arrow in a 350 spine that I shot with a 125 grain cut on contact 😮 broadhead with the Ethics 125 grain outsert/insert that killed an old buck but jammed on the exit wound & the failure point still existed right behind the components. I now run a 58 grain outsert with a Valkyrie 210 Jagger & it doesn't ever want to stop.

What’s the total arrow weight too please?

Great vid. What's your % FOC just out of curiosity

@instinctiveaddictionarcher8998

2 жыл бұрын

Anywhere from 20-30% depending on the build 👍🏻

How do you feel the Ethics system compares to the inserts and ballistic collars that come with the Gold tip traditional classic XT arrows?

@instinctiveaddictionarcher8998

2 жыл бұрын

The gold tip system is fine just not quite as tough as ethics but still great and better than stock👍🏻

Hey, don’t tell my wife I can make an indestructible arrows. If she finds out I’ll never get new arrows.😀

@instinctiveaddictionarcher8998

3 жыл бұрын

Well almost indestructible lol

So do they make something for wood arrows? I love carbons for my compounds but I shoot wood in my longbow and recurves. They shoot fantastic but I want to use the screw in broadheads that I love. Can you offer any advice?

@instinctiveaddictionarcher8998

3 жыл бұрын

I’m sure they would work fine on wood 👍🏻

@PeterNguyen86

2 жыл бұрын

Try the Tophat Woodscrew adapters.

Can you tell me any thing about there spinning inserts they sale''' i yuse'd pretty much the same set up that you did last year on my arrows except mine being blackeagle, i didn't think about the outsert sleeve witch ill be trying this year, i love ethics archery's products. I found your channel bout a week ago and i really like your info on the stickbow' i have asked Ethics, Ranch Fairy, Snyder and bout ery body else for there opinion on there spinning insert claim's,, no body ever answers,, even ranch fairy who was the only man that answered or responded ery time i ever posted a comment,,, and maybe ery body is just to busy sometimes ta answer ery comment or question they get' and i can understand that'' and maybe you havent had the chance ta try them yet'' anyway ill keep doing binness with Ethics cuz i havent found nobody else that sales the quality of arrow component that they do, just would like ta here the truth bout that one certian product witch i bought a dozen of and ran last year,, really love your channel and hope i get a chance ta shoot with you on down the road''' keep up the good work and god bless you and yours.,. thanx

@instinctiveaddictionarcher8998

2 жыл бұрын

Thank you brother, I honestly haven’t tried the spinning ones yet I’ve no idea how they would do but I’m anxious to try them out 👍🏻

What is the lowest draw weight you found to get that gold tip 400 still flying straight and what was the tip weight . Could I get 400s to fly perfectly straight out of 43 pound recurve with a 29 inch draw length and a 31 inch arrow any thoughts , also with 300 grains up front? Thank you brother in christ 🙏

@instinctiveaddictionarcher8998

2 жыл бұрын

Yes it will work as long as the arrows are around 31” and there’s at least that much up front but every bow is different, some just shoot harder than others and the depth of the shelf some are cut deeper than others allowing for stiffer arrows 👍🏻

how long is your arrow

@instinctiveaddictionarcher8998

Жыл бұрын

With the Ethics system you’ll need around 2-3” of shaft past your riser at full draw, my draw is 27.5” and those shafts were cut 29.5”, the sleeves cover around 1” of them 👍🏻

What's the fieldtip's O.D. for that GT arrow?

@instinctiveaddictionarcher8998

3 жыл бұрын

Not sure exactly but any standard tip 5/16 works well

Can you shoot it with out the collar? Just the insert.

@instinctiveaddictionarcher8998

Жыл бұрын

Yes sir there’s just no protection for the end of the shaft, if you’re not wanting a collar Id just go with either stainless or brass 100 grain inserts, they’d be more durable alone 👍🏻

@svilla995

Жыл бұрын

Thanks for the response. I like your videos! Especially since I picked up a TBOW a few months ago and saw you new videos with one. I’m kind of limited in choices for .204’s. I am looking for some brass inserts with the little lip out front for the points to sit against like on my 6mm arrows.

@instinctiveaddictionarcher8998

Жыл бұрын

@@svilla995 3rivers and Lancaster have the 80gr stainless outserts they work really well 👍🏻

@instinctiveaddictionarcher8998

Жыл бұрын

@@svilla995 also they have the Victory Shok stainless outserts that are even better and weigh around 80 grains for.204 arrows I love them and I know 3rivers sells them 👍🏻

i dump it in ice water after