Seriously good deal on this kit ! All quality tools, and CLEAN ! !

@thetoolbandit

Ай бұрын

I agree! Thanks for watching!

Channellocks with crook on one handle are used by iron workers for tying re-bar. They are easier to hang on to.

@thetoolbandit

Жыл бұрын

Thanks! I had to check KZread to see what makes them different. I have tied rebar with a twisting tool but have not seen these used before. Good info! Thanks for watching!

@peterchristlieb

Жыл бұрын

That box belonged to someone who did some HVAC work along with sure

The mystery Craftsman tool is a single spindle edge clamp. It attaches to a bar clamp to apply pressure at a right angle to the bar clamp.

@thetoolbandit

3 ай бұрын

Thanks for the info! Thanks for watching!

Sears was like the harbor freight of its day

@thetoolbandit

4 күн бұрын

I spent many hours at Sears just looking! Thanks for watching!

Very nice set of tools for the money.

@thetoolbandit

6 ай бұрын

Thanks! Hard to find good deals these days but fun looking! Thank you for watching!

Fantastic job, fantastic video. tHanks for posting it!

The chain wrench second draw is for cutting cast iron pipe you score the pipe all the way around then tap on the score with the smallest ball pen hammer.

8:30 Earlier this year I spotted that wrench set at a yard sale. I went ahead and bought them and some others. Then I go digging in my life long tool box and find that I had some of these wrenches. Since that day....everywhere I turn I keep seeing these ignition wrenches show up..... Great video!

@thetoolbandit

Жыл бұрын

I see them a lot as well. Always pick them up if they are under $10

@Dancing_Alone_wRentals

Жыл бұрын

@@thetoolbandit tHanks....I'll keep that in mind. I spotted another find, today. I bought a $5 dollar bucket of stuff. 1/4" Husky ratchet...completes a set of all three sizes I'm sending to a friend. 1/4" Superratchet by Williams, two quarts of 10w40, a large container of brake fluid, a lock cylinder popping out tool, porcelain cat, four keyed cylinders, padlock, hexbit set. That is the kind of luck I have. Doesn't happen every day but I seem to stumble upon good yard sales. (Down sizing everything due to age...people retired etc etc etc).

I believe those Stanley screwdrivers are Adam Savage’s favorite type of screwdriver.

@thetoolbandit

Жыл бұрын

I think I remember him saying that! I like the look, not sure about the quality. Thanks for watching!

Great haul, almost everything made in the USA too.

@thetoolbandit

Жыл бұрын

Yep! Only a couple tools not made in the USA. Seems like people bought better tools a few decades ago. Thanks for watching!

The yellow handle reamer from xcelite was made in my hometown of orchard park ny home of thy buffalo bills and they were the first tool co to use plastic handles 👍🏽

@thetoolbandit

6 ай бұрын

Great info! Thank you for sharing and for watching!

That was a great haul. I love those old craftsman boxes.

@thetoolbandit

Жыл бұрын

Me too! I always try to grab them at the right price. You can't get better storage any cheaper! Thanks for watching!

The Barcalo tack puller is better than any of the cheap junk you can buy today. I use it as a small pry bar as well. That Caborundom sharpening stone is pretty useful. I have one which I use to touch up knives and utility blades when I don’t feel like changing the blade. Nice haul!

@thetoolbandit

Жыл бұрын

Yep, that tack puller is a keeper! Thanks for watching!

2:50 the blue griped tool is a nibbler for cutting holes in sheetmetal probly ductwork but ive used then in cars they are a really slow method to cut metal but if thats all that fits the space then that is what you have to use. Clamps bottom draw, they are made to strighten 2x4"

Nice Haul!

@thetoolbandit

Жыл бұрын

Thanks for watching!

You made out like a “Bandit “on this box, yeah, the pun was intended! Lotsa good stuff, clearly the previous owner wasn’t into junk tools. The Indestro socket set is badass!

@thetoolbandit

Жыл бұрын

That's actually what my channel name is based off... making out like a bandit! I have another Indestro set, it's amazing! Thanks for watching!

Great deal enjoyed the video , Would love to see you put batteries in the Adjustable , Do a short video about it , Thank you take care

@thetoolbandit

Жыл бұрын

Good idea, I will have to give that a try. Thanks for watching!

U did good on that buy

@thetoolbandit

Жыл бұрын

Thanks! Always nice to have a extra box. Thanks for watching!

Cool box and looks like a good deal. I love buying lots like this at auction!

@thetoolbandit

Жыл бұрын

This was a "tag sale" but I thought was a pretty good deal. I like to pick up the old boxes, never enough storage! I do hit the estate auctions as well, love them! Thanks for watching!

The old craftsman punch set are the best ones they ever made

@thetoolbandit

Жыл бұрын

I've never used them, but I will have to make sure to give them a go. I always wanted the big setback in the day, never wanted to pay for them!! Thanks for watching!

That 1/4" drive set ive got, i paid 8.88 i belive for it sears used to do a craftsman tool sale eairly Saturday mornings and you could buy sets cheap. You had to get to the store earlier or they would be sold out. That was mid 90s. I got a full set of 3 rachetts 1/4 1/2 and 3/8 3 extensions and a full set of sockets for each driver for 29 bucks in the 1970 all made in Japan i still have them and the handels wrer more like snap on round they do not hurt your hand like the flat ones do where they dig into the back of your knuckels.

@thetoolbandit

6 ай бұрын

Yes! The professional series also had the round ratchets, they are my favorites.Thank you for watching!

Decent pick up - very decent

@thetoolbandit

6 ай бұрын

Thank you! It was a good hit. I don't find enough of these around me. Maybe I need to look harder. Thank you for watching!

Those pear head ratchets were made by Easco and a Snap On 3/8 set 1/4 to 7/8 sells for over $300

@thetoolbandit

Жыл бұрын

Thanks for the info! It is funny how Craftsman is more popular than Easco but Easco is the one making the tools. Thanks for watching!

Quick Tip: If you have a smart phone you can use a few different apps to identify almost anything. I use an app called Google Lens. All you do is point your camera at the object.

@thetoolbandit

11 ай бұрын

Thanks for the tip and for watching!

KAL (still kinda in existence as ProAmerica) was imported from all over Asia. I have KAL 8” adjustables from Korea, Japan, AND Taiwan! Those yellow/black Stanleys are the world’s worst screwdrivers. Barcalo tack puller is a serious keeper!

@thetoolbandit

Жыл бұрын

Thanks for the info! I agree on the screwdrivers, they strip out extremely easy. Thanks for watching!

You have two Craftsman clamps that are on the same side. I have two that clamp towards each other.

@thetoolbandit

Жыл бұрын

So I'm not crazy! One from each direction makes perfect sense! Thanks for watching!

Its for the base of a carburetor. Anybody remember what those were?

@thetoolbandit

4 күн бұрын

Clutch head screwdriver?

those pliers with the blue handle that says 18 ga on the handle, 2nd drawer up from the bottom, those are nibblers, they are used for cutting sheetmetal

@thetoolbandit

Жыл бұрын

I will have to try them. Looking at it, doesn't seem like you would be able to go very far into the sheet (too wide) I will try them out, I have a few different sheets laying around. Thanks for watching!

@gomerhondo7249

Жыл бұрын

Sheet metal nibbles.

The curved wrench is a distributor wrench

@thetoolbandit

6 ай бұрын

Thanks for the info! Thank you for watching!

How old is the toolbox? I bought one off of Maketplace FB.

@thetoolbandit

5 ай бұрын

Honestly I did not check the date. It is a bit buried in the garage right now but I would say mid 80's to late 90's. I will take a look in the Spring!

Carborundum for hand dressing grinding wheel

@thetoolbandit

9 ай бұрын

Thank you!

Would you consider selling the Craftsman 1/4 box/pear head ratchet??

@thetoolbandit

6 ай бұрын

Sorry but I am keeping that one! Thank you for watching!

The matco tape says 10 foot right on the label

@thetoolbandit

Жыл бұрын

When looking through a camera you don't always pick up small details.

Lisle bits are warrented

@thetoolbandit

Жыл бұрын

Thanks for the heads up, I don't usually warranty tools I buy used that are already broken.... I feel guilty :) Thanks for watching!

What box is a awesome deal

@thetoolbandit

6 ай бұрын

Thank you! Happy to find it!

what is your ebay seller name?

@thetoolbandit

Ай бұрын

all this is long gone but shoot me an email thetoolbandit@gmail.com

Thats a bunch of crappy flat handel craftsman rachettets, the Blue Point tape is automatic pull back in. And Blue Point is a snap on brand. Fiy. Thats a pretty old tape mesure.

Estate sales... If theirs one thing to go off of on what your states about.... Man I hate my Californian estate sales... nothing but shi my wife would buy.

@thetoolbandit

6 ай бұрын

Yes! It is crazy how they change by location. Usually the best tools are from blue collar middle class neighborhoods. Thank you for watching!