I forgot , a great place to find a good self healing cutting mat is Hobby Lobby. $14.99 plus tax will get a thick mat that is of good quality by Tech Tools. They are found with the architect and drawing tools. The mat is 18” X 24” Only down side is the grid is only on one side. The second side is is simply green. A value for the buck.

@bigstacksshop

Жыл бұрын

@edgell3 I haven't seen the cutting mat Hobby Lobby carries, but I did like the one I bought on Amazon. Inches on one side and centimeters on the other.

There's one more essential tool to grab from harbor freight, and that would be the 5.99 wing divider. Now, they have 2 different types of wing dividers there, there is one with a cheap screw at the top and looks like it won't hold a setting to save it's life, or the one I got that has thicker metal and a solid screw, and also has a pencil holder for doing circles i.e compus. It's called the Pittsburgh 6inch wing divider and trust me it's very handy for making stitch lines

@bigstacksshop

Жыл бұрын

@xDarkmoonrising Thank you very much for the tip, I am going to have to check this out.

Wow, excellent tool tips. Thank you, sir. This is also good for experienced leather crafters. On the cheap is always helpful! I always put scrap leather under my work peace when I am punching it!

@bigstacksshop

Жыл бұрын

@CIAG4PNP I appreciate the kudos and the extra advice. Thank you very much!

I saw the knot you tied. It reminds me of a saddle knot. I haven’t thought of that for years and years. On another note, I’d love to see you show how to make your stamps. I’ve only ever made a lifter from a ring shank nail. Stuck it in a deer antler and promptly cut myself LOL!

@bigstacksshop

Жыл бұрын

@carolscott4295 You osy definitely recognized it correctly. Mrs. Stacks worked with horses for many years, she was the one who came up with that knot. Thank you for commenting.

While the HF tools may not be the best choice, for someone just looking into the hobby, it's hard to beat $50 to get the basic tools necessary to see if you're going to enjoy it. If it turns out you don't like it, you can always find a use for the bag, mallet, and knives. Best case, you use the HF stuff for a year or two and upgrade to something better as you need more tools or they wear out.

@bigstacksshop

Жыл бұрын

@michaelmurphey2112 I totally agree, HF has some decent tools for the home consumer. That being said, sometimes I see if a better tool might be available elsewhere for a similar price.

literally have all of these for leather work from HF. Worth every penny.

@bigstacksshop

Жыл бұрын

@evictor99 Thank you for sharing. While they don't technically have a HF Leather Tool kit, they do actually have most of the basic tools you would use.

I've had two of the rotary punches bend to the point that the punches no longer hit the brass stop. I have that same hammer, love it! I also have the HF punches. They work fine considering that I don't use them every day. I really like the cutters that are round and look like pizza cutters. They are well worth the money.

@bigstacksshop

7 ай бұрын

@yellowdog762jg Very awesome, thank you for sharing. I've experienced the same thing with royary punches and have been told the only rotary punches that don't do that are the expensive ones.

Another great video! Love the content. Keep em coming!

@bigstacksshop

Жыл бұрын

@ronroberts7297 thank you so much. Have your punch set prizes arrived yet?

@ronroberts7297

Жыл бұрын

@@bigstacksshop the first one came and the second is due tomorrow. Thank you!

Thank you for sharing this with us. Great tool ideas. Everyone stay safe,warm, happy and healthy. From Henrico County Virginia

@bigstacksshop

7 ай бұрын

@norm5785 Nice to see a fellow Virginian on here. Thank you very much for the kind words.

I was bought their wooden chest with the drawers with the felt lining for storing my leatherworking tools. It's really heavy duty and has two different sets of keys to keep it locked up... really nice...

@bigstacksshop

6 ай бұрын

@thepatrick42044 I own that same toolbox to keep my woodworking hand tools. Wooden toolboxes are great rust inhibitors, which is also great for quality leather working tools.

Awesome selection of budget basic leather crafting tools. I still keep some of my budget picks despite upgrading some of them. If there's one essential I'd probably add, it's sandpaper for evening out and to smoothen edges. If you could mount it on a budget sanding block, that makes it even better. Great video as always, my brother! Cheers!

@bigstacksshop

Жыл бұрын

@luisofgall_bladder_works6435 I will keep mosy of my budget picks as well. I'm not a fan of the inexpensive sandpaper sheets, but I do think their sanding belts and discs aren't too bad. Thank you for sharing.

@gall_crafter_works

Жыл бұрын

@@bigstacksshop A belt sander would definitely be a dream tool. Leather, wood, some metal work too. Unfortunately that's no longer within starter budget range HAHA. Love your videos bud! You are a blessing.

@bigstacksshop

Жыл бұрын

@luisofgall_bladder6345 I'm humbled by your comment. Thank you.

The HF ruler with the cork backing is ok, I just don't like that the cork doesn't go all the way to the edge of the ruler allowing the leather to slightly distort/move/stretch. In my opinion that's why you don't get a very good cut with the HF hobby knife.

@bigstacksshop

Жыл бұрын

@Cherokee2005 I did not even consider that, but it is a very good point my friend. Thank you for sharing.

Thank you! Cheers, Ellen

@bigstacksshop

Жыл бұрын

@ethantaylordesigns Thank you Ellen!

I have used 90% of the items you highlighted, and I am comfortable using them. I am not a big fan of the blades for the hobby knife or the box blades. They don’t seem to hold an edge. However, new blade every time you start a new project will give you sharp cuts and strategy edge. I know your intent of the video was to show a sample what you can buy at HF. Good job. I have been using the punch set and have no complaints. To go one set further, have you thought of or have a HF one arbor press? I have been using mine at least five or six years and I must say it does a great job! I have made some modifications such as a 1/4” hole in the center of the shaft and a 1/4-20 screw in the side to hold tools . Also, it works great as a press of my makers mark, letters etc… PRACTICE, PRACTICE, PRACTICE.

@bigstacksshop

Жыл бұрын

@edgell3 I do have the one ton arbor press, and I love it. It's a shame they no longer carry it in the stores. I think I wasn't even able to find it on their website. That thing has been one of my best HF purchases. Thank you for watching and sharing your experience.

@bigstacksshop

Ай бұрын

I don't really have a makers mark stamp. I did have a friend 3D print a custom stamp one timeand it came out great.

Hey man, I've been enjoying your videos, thanks for all the tips! A tip from me: try holding the scalpel like a pen and cut vertically, not horizontally. Or was that just for the camera?

@bigstacksshop

Жыл бұрын

@matkosmat8890 No, that is how I cut it usually. Thank you so much for the tip, I'm going to try that.

Punches require a bit of fine sharpening but work great if you do that. Rotary punch-handy to carry in your saddle bag or have hanging around the barn...not designed to be an everyday, heavy use tool. Hobby knife.. fine sharpen the blades before use. Like you demonstrated, right out of the package, not so great. If you know how to, a little effort (just a tiny bit) makes a huge difference. The most important thing: dont break the bank starting out but don't make it hard because of cheap tools. Have fun with your new hobby/crafting project and enjoy it. Great info and recommendations!

@bigstacksshop

7 ай бұрын

@BigCarmine Thank you very much my friend, all great info! My wife is a horse person and always steals my rotary punches ... 🤣🤣🤣

First time seeing your videos. Algorithm did good lol! Enjoyed so far and subscribed. You remind me of my friend Dave and sound just like him. Great beard and clear concise on-camera work too. Love me some HFTools and I do knifemaking. Getting prepped to start doing some sheathwork in addition to the Kydex stuff I’ve messed with. Sometimes leather just carries over the essence and style of a knife better than Kydex can. Also enjoy BOBs and related wares. BTW that HFT bag is a good bag, but with some heft, I’d stick with the Woodcraft model. I have several of the HFT ones with various little sets of tools. Some in the truck toolbox, one with cables, ratchet straps, etc. I use one for my chainsaw tools and gear too. For the most part they ride around in the back of my Blazers, or in the truck toolbox then get used on the tailgate or close-by, so I can’t attest to they’re heavy duty carrying strength. They have some heavier model bags that really have some carrying capacity. The Bauer and Hercules models are also nice. At that point you’re getting up there with the Woodcraft price. I’ve shot them with some CampDry waterproofing spray and that’s been helpful. You’re right up my alley, So I’ll be checking out more of your channel.

@bigstacksshop

9 ай бұрын

@CavanalK5 thank you so much for the kind words. There are so many great things you said. Im planning on making a knife and sheath in an upcoming video, so stay tuned.

Almost all of my tooling is from Harbor Freight and I have to say, I very rarely feel like I wasted my money there. I own that black and red hobby knife and while the blades sucked until I stropped them, I do like the handle. I put #5 X-Acto blades in it now. It came in a carving kit for like $5, so I can't really complain. HF is also a great place to stock up on vices, hammers of all types, abrasives, and even some powered tools as well. A lot of people get convinced that cheap always means *cheap* and it really doesn't. HF offers up tons of useful tools that can get you through your learning curves at a much lower cost. Hell, I still buy cross cut and bastard files from them just because I can abuse them for a year and then reforge the steel when they wear out without feeling guilty about it. Also, a basic carpenter's utility knife or box cutter with a pack of HF razor blades beats out the competitors penny for cut every time. You don't even need to strop your utility blade like I do. You can make three cuts, swap ends, cut and then toss the old blade without having to feel like you're throwing money away. If you want to get started in any kind of craft like working leather, bone, or steel HF should be your first stop for your beginning tool set! 😎👍

@bigstacksshop

Жыл бұрын

@brianlawson3757 I have to agree, they have a lot of decent tools at inexpensive prices. There are some things which I choose to buy elsewhere. That Hobby knife itself wasn't bad, but for $1 more on Amazon, you can buy a much higher quality tool. But, if you strop the blades like you do and they cut the same, it shouldn't really matter. Thank you so much for your feedback.

I appreciate the tool comparison. Have you tested rotary cutters in leatherwork? I'd enjoy seeing a comparison video. Thanks!

@bigstacksshop

7 ай бұрын

@glenking3058 that would be a great video, thank you for the idea.

I really like this video!!! Great job!

@bigstacksshop

Жыл бұрын

@s-volt9814 Thank you very much, I really appreciate it!

@s-volt9814

Жыл бұрын

@@bigstacksshop Oh dude, you deserve it, you bring great energy!

@bigstacksshop

Жыл бұрын

I do it so people will get off their couch and into their shop. I really do appreciate it when you guys give the shout outs, thank you.

Yeah, you do want the Silky Katanaboy 650. I had one bought for me, just incase the economy got really bad and I couldn't get any gas for my Stihl chainsaws. The 650 cuts just as smooth or smoother than a chainsaw... leaves beautiful clean surfaces. It's the only silky I own. But I'd love the get my hands on the outback trio...

@bigstacksshop

6 ай бұрын

@thepatrick42044 Sounds great for firewood, but I think a folding saw will butcher leather.

So the red and black exacto store knife I have and love. I have put me blades in it. Not sure if that makes a difference. I have the rotary punch also, I don't often use it, but it works. Self healing cutting mats, either Amazon or Walmart. I hated there punches from hf. Didn't care much for the rubber mallet either. I also have a utility knife from hf, bigger size because I'm kind of not small. But appreciate your honest review.

@bigstacksshop

Жыл бұрын

@michaels2208 From the comments so far, a lot of people seen to like that hobby knife. I must have got the blade made on a Friday, because it didn't cut well at all. 🤣🤣🤣 Thank you for sharing your experience with us.

I have those punches and have no problem with them. As for the rotory punch, while it works as well as any other I've used, the head doesn't lock into position very well, and when it does, it's not centered on the anvil.

@bigstacksshop

7 ай бұрын

@cjroberts8612 I'm sure all the punches need is some sharpening. As far the roast punch, I've had that same issue with a few of them over purchased over the years. Thank you for sharing.

I moved away from hobby knifes and went to using a scalpel with replaceable blades. the Scalpel handle was about 10 buchs and then a pack of 200 blades was around 10 bucks as well. much smoother in my experience.

@bigstacksshop

Жыл бұрын

@mcgothbox1 Thank you for sharing. That is a great idea Im going to have to try.

@mcgothbox1

Жыл бұрын

Let me know if you need the links

@bigstacksshop

Жыл бұрын

@@mcgothbox1 thank you. If you could send them to me on Instagram or Facebook @bigstacksshop that would be much appreciated.

@jayb94htx

Жыл бұрын

Where you got 200 blade for 10 $

@mcgothbox1

Жыл бұрын

@@jayb94htx Sorry i was a little off its a box of 100 but still 100 for 10 bucks IMS-CBLD11 Box of 100 Scalpel Sterile Blades #11 Carbon Steel Individually Foil Wrapped

Thanks for the add

@bigstacksshop

7 ай бұрын

@ralphclark1319 than you very much, my friend!

magnetic tool bar also is only 8 bucks and is great for punches and other leathercraft tools

@bigstacksshop

2 ай бұрын

This is a great idea, I'm going to have to try this!

On the two hobby/craft knives. You should have tried the blade from the good one in the bad one. I have both styles (actual X-Actos though), the handle design of the more expensive one is much more comfortable to use. The blades? Interchangeable. So unless the collet mechanism was wonky with the expensive one, it simply came with a lousy, interchangeable, replaceable blade.

@bigstacksshop

9 ай бұрын

@johnsanford3596 Ive had another one of my viewers tell me that as well. I'll have to try it

With any of HF tool bags give all the seams a good tug in the store and check all the zippers and snaps, don't just pick one up and toss it in your cart. If the zipper is a little sticky usually hitting it with a little bee's wax will smooth it out.

@bigstacksshop

7 ай бұрын

@tearl5676 This would be a good practice. Thank you for sharing.

@tonyhemingway7980

7 ай бұрын

That's good advice, however, I hardly ever zip my utility bags closed so, for me that wouldn't be a problem.

@bigstacksshop

7 ай бұрын

@tonyhemingway7980 I almost always zip mine because I have a sawdust problem in my workshop. 🤣🤣🤣

Why not try the excato blades in the hobby knife handle? The handle might be good; just shoddy blades.

@bigstacksshop

Жыл бұрын

@keremiahkimdel8310 A lot of people have said they like that handle. I could try it, they aren't too expensive. But those blades that came with it were straight doo-doo.

Those HD punches work great cutting through thick materials when you put them in a drill even met wood just sayin

@bigstacksshop

7 ай бұрын

@adamagedone4u I'll have to give them another try sometime. Thank you for sharing

I have the whole puncher I use from time to time but my favorite thing is for stamping and tooling leather I use one of the orange handled dead blow hammer

@bigstacksshop

Жыл бұрын

@bartstewart1807 I haven't tried their dead blow mallet yet, but I'm going to make a mental note of that. Thank you for sharing.

@bartstewart1807

Жыл бұрын

@@bigstacksshop it holds down the bounce if your table is not just super solid

@bigstacksshop

Жыл бұрын

@bartstewart1807 that makes sense. Great idea to share on here, thank you.

I have thos harbor freight pen knives and they do work great, just get some good exacto blades and you'll be set.

@bigstacksshop

4 ай бұрын

@BillJanakos I have had a few other people tell me this, I'm going to give it a try. Thank you for the feedback

Did I miss it, where did you source the Woodcraft bag?

@bigstacksshop

7 ай бұрын

@keith9875 Woodcraft is the name of the store. This particular bag is usually on sale for about 40-50% off in December.

Nice video. I have found that the hobby blade handle is more comfortable, it won't roll away, and it will hold x-acto blades. The sharpness of the blade is not a function of the handle.

@bigstacksshop

7 ай бұрын

@edbilek8033 Thank you very much. I've had someone else tell me that and I'm willing to give it another shot. I'm glad you didn't mention stepping blades, that's not really my thing to save a few pennies. I'm cheap just not that cheap.

personally i keep a handful of the $0.25 utility knives with the breakaway blades from next to the register on hand, strop frequently and they last a long damned time.

@bigstacksshop

Жыл бұрын

@animusreptorcrafting I like your style. I haven't come to the point where in strong blades yet, and I salute you

I think you kissed potential here. This would’ve been you giving your opinion about how the harbor freight tools would get you through a project

@bigstacksshop

Жыл бұрын

@CastroTheMexican I could definitely agree these are not premium leather working tools. However, many of these tools are now in my leather travel toolbag. So, I would say they go much further than just getting a beginner through a project.

Ever strop new blades, before use? INCLUDING THE PUNCHES!

@bigstacksshop

Жыл бұрын

@rosemarblock7751 I totally agree with you, stropping your tools not only give you the best edge, and make them last longer. However, whenever I review tools, I so so straight out of the box. I feel a premium tool should be delivered in usuable shape right out off the box. As for blades, I will strop blades frequently to maintain a sharp edge. I will not, however, strop disposable blades if I can spend a few cents more for better ones. That being said, stropping your disposable blade isn't uncommon. A lot of my viewers have shared that they do this quite often.

hello, i was wondering: how do you sharpen a hole punch? i tried sandpaper but had only mediocre results

@bigstacksshop

Жыл бұрын

@andyablluxenbourg8627 Good question. Sandpaper should work, but you have to step down your grits as you are sanding them. I use a couple of oil stones. I go over a few methods or sharpening in this video: kzread.info/dash/bejne/eGSCw8StY63Ohso.html

@andyablluxembourg8627

Жыл бұрын

@@bigstacksshop thank you

Please help me understand what difference the mallet makes.... Thanks!

@bigstacksshop

2 ай бұрын

@tonjiwilliams1588 When you use a metal hammer, over time it can mushroom your striking tools. Most times I use a mallet to prevent this from eventually happening, but there are sometimes I use a ball peen hammer to get more force.

When using a punch for the holes you can avoid damaging your punches and the Matt,,, Use a scrap piece of leather under the piece your are punching

@bigstacksshop

7 ай бұрын

@johnhawkins1067 This is a great idea. I always used scrap leather with a rotary punch when I started leather craft. Thank you for sharing.

With the economy going into the shitter, what we really need is a shoe repair like my Grandfather had during the Great Depression... He kept our family in repaired shoes well into the 1950s...

@bigstacksshop

7 ай бұрын

@edwardbrown7571 Such a great story. Shoe repair is an art in and of itself. When I worked at a bank, I would take my shoes for new soles quite often. Most places did a crappy job and they fit too tight, but there was a place of two that did a really good job. Thank you for sharing.

I've been using the Harbor Freight rotary punch for a while and I do NOT recommend it. There is a little retaining bar to keep it from turning and when you start punching thicker leather, that retaining bar will warp and bend and eventually break as it did on mine. Just stick to regular punches or a drill.

@bigstacksshop

Жыл бұрын

@nicholaswilcox I appreciate you letting me know this. I'm not a huge fan of rotary punches, so I don't get to use them too often. But they are great for a travel bag of leather working tools. Thank you for sharing.

@nicholaswillcox

Жыл бұрын

@@bigstacksshop agreed on that point. I was using it because I work at home at a desk and between outages and calls I can quick punch out some holes for lacing or whatever without making too much noise (overnights). But yeah it was the weirdest thing. I went to punch the next hole and noticed it was trying to punch at an angle. LOL Something bent. Straight line punches definitely do a cleaner job and are way easier on the hands.

@yellowdog762jb

7 ай бұрын

Rotary punches are quiet. That's their only good point. IF you are set on using one, spend the money on a heavy duty one. The cheap ones bend. Straight punches are the way to go. Good to know that I'm not the only one doing projects while others sleep! I'm way more creative in the evenings for some reason. Lol!

Harbor freight still sells a scratch awl that isn't half bad, and it's showing as $2.99 on their website.

@bigstacksshop

7 ай бұрын

@christopherbillington8965 Thank you for sharing, I'm going to have to check that out.

A quick pass with a heat gun would flatten that self-healing board right out so it doesn't slip!🤙🏼

@bigstacksshop

7 ай бұрын

@dr.c8076 That's a great idea, I'm going to try that out. Thank you for sharing.

I subbed because of the Dixxon. 😂

@bigstacksshop

Жыл бұрын

@ryanvick1984 I appreciate it my friend, they are great flannels. High quality. Plus I love their "Work hard, stay humble" motto.

I’m surprised you didn’t say, if you have any tools you use for leather , from harbor freight;! Put them down in the comments. Maybe 🤔 I should start a channel. Nice job thanks for sharing!

@bigstacksshop

2 ай бұрын

@doalex2085 That will be a great idea for when I do a follow up video. But now that you bring it up, what tools do you use from harbor freight for leathercraft, my friend?

@bigstacksshop

2 ай бұрын

@doalex2085 You definitely should start a channel.

@doalex2085

2 ай бұрын

Well;! For the past 25 years, I have been making leather scabbards pouches, bolt bags, and other stuff that Ironworkers use to carry their tools 🛠️ . It’s been fun, one tool that I use pretty much on every piece I make is welding pliers, to help me bend and shape, mold the leather. I like the diamond files to sharpen my hole punches, I’m always looking 👀 at all the squares , rulers stuff to measure with. I like their tool boxes too, I have one for all my bbq tools, and one for my leather tools.

I'm not seeing the link to the template sign up.

@bigstacksshop

Жыл бұрын

Let me see what's going on, I had edited it before posting yesterday, but I don't see the changes now. Anyway, here is the so you can access it right away: bigstacksshop.eo.page/b7z9t

@bigstacksshop

Жыл бұрын

Should be good now, thank you for letting me know it didn't update.

You can't get good cheap punches unless you rob someone in person, or just steal an ebay lot. Prepare to pay a lot for good punches. And then prepare even harder for all the oblongs and slots and strap ends. You'll be into punches with more dollars than you are into your car. And you will be okay with that. It ends up being ok, somehow.

@bigstacksshop

Жыл бұрын

@garret6371 That is exactly the way I feel about stitching chisels. I do like the moderately priced owden punches a lot. So much I just bought their 13 piece set.

Anyone know an afordable way to sharpen a hole punch?

@bigstacksshop

Жыл бұрын

@MrsGodivaJane I go over this in one of my videos. You can find it here: kzread.info/dash/bejne/eGSCw8StY63Ohso.html

@doalex2085

2 ай бұрын

Harbor freight Baby;! Get you a set of diamond files there the bomb 💣;!

@bigstacksshop

2 ай бұрын

@doalex2085 I haven't bought them yet, so those files hold up well?

@doalex2085

2 ай бұрын

Oh yeah real good;!

Watching you cut those thin strips with the harbor freight exacto gives me anxiety...

@bigstacksshop

7 ай бұрын

@dr.c8076 🤣🤣🤣 I was confident I wouldn't cut myself, but I had to be real careful.

I'm no leather worker, but wouldn't a scalpel work for trimming? Carefully!

@bigstacksshop

7 ай бұрын

@appalachianamerican7171 yes they would, I has another user suggest this as well. I'm definitely going to try it. Thank you for sharing.

Does HF sell leather?

@bigstacksshop

Жыл бұрын

@mikehutchinson9589 The only thing you might find there is a very thin leather welding aprom you can cut into. I've never seen just plain leather up there.

@michaeldunaway5948

Жыл бұрын

Cheap as a china man.not a grain of leather to be found.

👍

@bigstacksshop

Ай бұрын

@Everlyhotrodshop Thank you

It’s not the knife handle but the blade

@bigstacksshop

Жыл бұрын

@aaronionta7134 I totally agree with you, it is the blade. I suggest purchasing the exacto hobby knife over the HF one because it would be a waste of money to have to buy the both the HF knife and new blades as well.

You have to strop those cheap blades to get them to cut at all….

@bigstacksshop

7 ай бұрын

@invictusbp1prop143 I have heard this from many people, but feel stropping these disposable blades more than once or twice is more work than it should be to save 50 cents or a dollar. Not judging anyone, it's just my personal preference.

poor camera angles

@bigstacksshop

6 ай бұрын

It's very hard to create, shoot, and edit DIY content of yourself that is interesting to watch. I appreciate any feedback I can get on it. I also have a traditional workshop and not a "studio workshop" so getting great shots of action with a tripod can be tricky. I'll try a few new angles.

obnoxious

@bigstacksshop

9 ай бұрын

@billmatteson sorry my video made you feel that way, friend. What about this video do you find obnoxious?