No video
ESP32 CAM Getting Started | Face Detection
Hey friends in this video I will show you how to setup and use ESP32 - CAM module for the first time
Arduino - File - Preferences
dl.espressif.c...
Materials:-
ESP32 CAM
TTL Connector
Jumpers
Breadboard
Follow me on:-
Website:- www.viralscien...
Facebook:- / viralscience20
Facebook:- / viral.dodhia.73
Instagram:- / viral_dodhia_
Twitter:- / viral_science_
---------- VIRAL SCIENCE © ----------
Пікірлер: 336
Well Done broo I was crackng my head to use this and finally i used raspberry pi with picam
@drastivitobnaik4963
3 жыл бұрын
Hello How did u do it using raspberry Pi.could u plse tel me.
Thank you for being the person who finally made a video a begginer can understand
Hey guys, I am writing this to help others who run into the same problem "Brownout ...triggered". This is caused by low voltage coming from the FTD programmer on the 3.3V rail. As a solution I switched the jumper to 5V on the FTDI and moved the wire over to the 5V pin on the ESP32-CAM. Everything works fine now!
@DjLight.
3 жыл бұрын
Thank youuuuuuuuuuuu soooo muchhhhhhhh
@ergun5276
Жыл бұрын
If this method didn't work, try powering the card from a different unit instead of an FTDI unit (it worked for me).
@abubakarawwal1708
11 ай бұрын
Please whenever I upload the code they keep telling me that there is an error with the selected port. Either is not connected or does not exist.
“All right Mr. DeMille, I am ready for my close-up”
Your hair so thick for a sec I thought it was a turban. Awesome work by the way.
Bhai mast hai . Lekin Bhai 1 aisa video banaye jo kisi bhi likhi hui latter ya kuchh bhi likha ho to use scanner kar ke vah bole ki kiya likha huaa hai. Bhai aisa sambhav hai to ek video banaye.
Thank you very much from Brazil. I really admire your culture and country.
I follow your instructions but for some reason it's not working. These are the errors I'm getting on the serial monitor. [E][camera.c:1049] camera_probe(): Detected camera not supported. [E][camera.c:1249] esp_camera_init(): Camera probe failed with error 0x20004
Cant the program connect to the wifi and web server before setting up the camera. Then we can get the ip from the serial monitor before attaching a better power supply. I've never been able to get these to work with out the camera errors and every answer that fits my problem is mostly power related.
How can i control output by recognition the face?? I wanted to Say that, suppose if my face detected then it will do another work like led blink/motor running etc. Please tell or make another video using this module.... Please please please Please
@sabnadevip7580
2 жыл бұрын
whether you find that??
Esp 32cam and Android phone same WiFi se connect hona chahiye kya
Hi I finally got it working but I have a new problem, if the esp32cam gets disconnected it won't reconnect to the router/hotspot/network automatically and I have to reach the esp32cam and restart it by hand. What if I want to fix it in some place high? Do I really need to restart it every time? Can't it just get reconnected to the network like any other normal device? And btw can I add multiple network credentials to esp32cam code so if one is not in range it would connect to the other ones. Thanks in advance.
What if i have more espcam modules and i wanr live feed from all of them on the same ip
@lexander9686
4 жыл бұрын
Thanks for the idea bro
@gabiold
2 жыл бұрын
You have to setup a router and an internal private network for cameras (with different IPs of course), then configure the router to do port forwarding, different ports to each camera's IP. But if you want to stick this contraption to the public internet, then think about security first...
Bro what this works in same network connection or out of the network connection like I connect camera to Wi-Fi and I took that IP and put it on my phone browser and Iam using my mobile internet data then it will work....
@ViralScience
4 жыл бұрын
The procedure i showed in this video will work for same wifi network You cannot see the stream through mobile data or other networks I will uploading another video for this... stay tuned
@Ai_chimp
4 жыл бұрын
@@ViralScience ok
hi viral, have you faced the video stream freezing issue on esp32 cam while trying to use face detection
Hello VS, Under programmer it is not showing arduino ISP AVR. Please help me.
Can't find AVRISP in programs. Can you please help me..
@shahoisam6124
2 жыл бұрын
I have the same problem, have you found a solution yet?
At 4.26, whether I should un comment Ai thinker model. Can I use other camera model.
Can we detect a particular object
you wired the 3.3v pin? It doesn't work with 3.3V, only 5v. At least, I tryied to use 3.3 with a 9v=>3.3v dropdown module, with arduino, no luck. And.. face recognition does do nothing :D
sir,..thankyou so much for this detailed tutorial.....it is helping my project ..thankyou thankyou......
PLEASE reply , iam getting an error after pressing reset button in serial monitor "Brownout detector was triggered", tech team support from that site suggest to power the esp32 with external power to 5v using LM2596 . is this issue because of less voltage to esp32cam? i connected to 5v .
Your module came with the Camera already prehooked - Mine does not. I was hoping to see how the camera could be connected. I got 2 pieces in my bag, one is the ESP32 and the other is my camera separately.
Can we make a face recognition robot . If yes then please make it. Atleast a circuit that recognises u and says your name
hello i have seen the video but when it comes to tools programmer i dont have these options u got i only have esptool is that fine? like will the code work or is there a fix to this issue?
The video quality in this camera module is like those old Nokia phones that first came with cameras
All good but when the IP should pop out, instead this message pops : [E][camera.c:1049] camera_probe(): Detected camera not supported. [E][camera.c:1249] esp_camera_init(): Camera probe failed with error 0x20004 plz help
@DjLight.
3 жыл бұрын
Hey bro i have also face this problem can you solve this problem? Pls
@DjLight.
2 жыл бұрын
Esp32 cam ka jo power pr wire lgai h osy 5v pr lga do or bechy sy jo module h osy be 3 ke jga 5 krdo 2no module ko 5v dna h
hey man, tks for the tutorial! My question is: how do I get the file from the faces that it recognizes? Or how do i config this feature?
☹Nice project, I just can't save anything to the SD card. Face Detection works but the face recognition works but how do I name we detected is. Regards Henk
Excellent project. Very good video
Thank you for this Video...it really help but is not detecting my face need a little help please
Kya PL2303HX USB to TTL Converter isse bhi program upload ho sakta h kya
Please I need your help, How do I put the access point in this code, I already put wifi.begin softAP and it doesn't work, what do I need to change to have AP access and have all the camera options?
Great work
Hello Viral Science can I change the name of subject as per my wish ? Thanks for awesome video
HOW have u opened this website becuase if i click the link from the description it only gives me the code
I want to reinstall programming in my this esp32 cam from new point bcz some features r not working so what I need to do ?
I cant use CIF its says: Please select CIF or lower resolution before enabling this feature! buts its already in CIF and in lower resolution the square of face reconigtion dont apper
While pressing the onboard button the LED is not blinking , I tried two boards, tried 3.3 and 5 v (on different pins), what could be wrong ? Also showing timeout error while uploading, tried two computers, tried older Arduino IDE (1.8.10).
@Charmingbanana696
2 жыл бұрын
Yes this led on board not blink at all but for the time out error check your settings in tools>partition schemes- huge......... And upload speed according to your board , if you have ESP32-S then you have to set it to 115200 and then check it.
Really good bro
Please help me use esp32 cam to both record live video while taking pictures saved on memory card
can i collaborate it with body temperature sensor? instead of showing "hello subject" it will showed what your body temperature?
Goodjob bro!💯✌.Keep it up💥.U are my inspirations for create my own youtube channel.Thanks well done!😉🙌
Is there any led blinking while we connected to the power supply ?
Thank you very much bro after a long video
Please can i do this project with arduino nano.. can i also save these video recordings into an SD card?
This Final Ip address will changed every time or it will remain same once for all !Plz reply
Thank you very much for the explanation teacher, I loved the video, I'm a big one on the channel, but I have a question How can I view images from the camera while on another network, ex: through my 4G and I see everything that happens with esp 32 in my house that is connected to wifi
Hey can I ask? Is it possible for the esp camera to alarm once it detects a face that is not enrolled in the camera
Good vid
good morning bro. With this can i record videos on my mobile phone, cause i want to use it on my drone.
Ossom project bro 👍
Could You wire it to a motion sensor so that the stream does not always have to be on.
in can not find the option in programmer ,tool,arduino , and the ttl programmer is not detected in my computer can say me it pls plz do reply to question
Hi Sir, thank you for your tutorials, it was great. Please, I would like to know if by inserting a memory card, the images recorded by the Esp32-cam module can be used for easy detection, or if facial recognition is limited depending on the space available to the esp32-cam , or if it is possible to store the maximum depending on the external memory add? Thank you, please answer me.
@Madmaxkkb
4 ай бұрын
Did you get the answer ?
plz when i click on the reset button to get the url adresse in the monitor serial i get some symbols instead can you plz tel me where is the problem?
Please make on face tracking with esp32
Help me bro please I have done the project before and I was going to do your car controlled esp32 cam project from that movement I am getting an error as A fatal error occurred : MD5 of file does not match data in flash
I'm facing some problem after uploading program. When I open the serial monitor and pressed the reset button a dotted line counting like this"...........…............". Please help me to resolve this problem. Thank you.
It takes only photo or makes video also?
Please can you make a video using esp32 to implement object detection using de1-soc?
sir this video is very helpful to us , I want to recognize face with his name and some info.....can you please suggest me
Is the face detection done by the ESP32 board or out on that website you linked to?
@12wfrank
3 жыл бұрын
I have the same question about it
@raulg08
2 жыл бұрын
isn't there a code behind it? i don't think esp32 does face recognition by itself? or i might be wrong idk
@RogerGarrett
2 жыл бұрын
@@raulg08 I'm not sure what you mean by "a code behind it". Any processing done on the ESP32 board or out on the website is certainly done by a program, by software. Perhaps that's what you mean by "a code behind it". My question is whether the software that does the face recognition is on, and processed by, the ESP32 or it's out on the related website. It's partially a question of whether the ESP32 is powerful and fast enough to do such processing. It would be nice if an answer would be provided, along with some links to where that type of software for the ESP32 might be available.
bro when i pressed the reset button the led didn't turn on and when I open the serial monitor it showed rst:0x1 (POWERON_RESET),boot:0x3 (DOWNLOAD_BOOT(UART0/UART1/SDIO_REI_REO_V2)) waiting for download
@kennethj.mottaespinoza6728
3 жыл бұрын
Lo solucionaste? :'u
Bro make a object Detection project using the same board
hello, i kinda do the same project but the difference is my camera can detect abnormal behavior like falling and running, can someone teach me how can i do the code . NEED HELP ASAP
Does it save the face IDs on power removal. Please share.
Can you help me esp32 ile çekilen fotoğrafın rgb bilgisisi nasıl alabilirim
Hi. Can we detect face with or without mask?
Does this module has wifi and bluetooth inbuilt? Also can we access this using blynk app?
Brother, the port ain't showing? What can I do? Where can I get the USB Data cable? I didn't get it with UART TTL board.
how is the phone you are doing good quality vidio
I have a problem that the avr program does not appear, how can I solve this problem?? Does this have anything to do with the inability of the camera to recognize the face?
Do we need internet in order to detect the face.
Do a video on esp32 cam surveillance car
@ViralScience
4 жыл бұрын
Sure
@charantejah3181
4 жыл бұрын
@@ViralScience thank you bro 👍👍👍👍👍👍👍👍
i am not able to code it with arduino ide 1.8.19 . it is showing fd_forward.h missing when i compile it.i have not done any unnecesarry changes in code.i looked on net but nothing worked, can u please help
@PowerJiang
18 күн бұрын
I work it normally on 1.8.13 for your reference.
D9 we need to connect to laptop all the time can't we disconnect it
We should use only a router are wifi hotspot why can't we use the mobile hotspot data to connect the ESP32CAM
Does it delay a lot?
Bro you wrote arduino code but to which one you uploaded , can we program directly esp32 with arduino ide
what is the you are using now
I am unable to use the camera_pins.h library with the process you mentioned...can you please help me solve the issue ?
buenas hay algun proyecto para leer matricula de vehiculos ?? gracias
You selected wrover in boards but AI Thinker in sketch. Why this mismatch?
Please what is the range of esp 32 camara module
hi i am facing one problem this project is very necessary and urgent [E][camera.c:1113] camera_probe(): Detected camera not supported. [E][camera.c:1379] esp_camera_init(): Camera probe failed with error 0x20004 Camera init failed with error 0x20004 pleas do the nead full ASAP
You have one more subscriber.👍
excellent project, I would like to ask a question, How can I add a 16x2 LCD so that a text appears when opening and closing the "solenoid lock"? regards🤝
@willwahlberg1890
Жыл бұрын
You can use one of the LCD libraries and include that in the arduino code. Look up some videos on connecting it to arduino. It's only a few lines of code to accomplish what you want.
@officialayanvarekar
Жыл бұрын
I did this on raspi without lock , works great , use with i2c backpack module
Great video. Thanks
what model camera bro? mine not setting up the facial recognition
Please whenever I upload the code they keep telling me that there is an error with the selected port. Either is not connected or does not exist.
Please select CIF or lower resolution before enabling this feature! How can I fix this error?
Antenna free for esp32cam Or we have to purchase seperately
Great video. Sir, how long or max distance to capture face?
Sir...can we do simulation using esp32...is it possible to program it by simulation ....I searched for it and got library for PCB layout only ,I can't program it...can we do simulation using esp32 cam...?
I have done the same but after using serial monitor I'm getting flash err 1000,how to solve this?
How can we store the face recognition data in other databases like MySQL and firebase
hi, i got the error where it say the library for camera_pins.h not found. why?
Superb video thank's bro
while uploading the code,I am getting the error that Failed to connect to ESp32:no serial data received.How to solve this