Very, Very interesting, Fast and clear description of How to do very interesting thing with 2 eps32-cam

You are the king I was just going to do it bro

I like your video. Thanks you

Awesome project .. thank you

Hope you get 150 k subs as fast as possible

The fact that you don't remove the plastic protector from the lenses and using the cameras with it, hurts my brain.

That was amazing sir awesome

Great project. The icing on the cake would be a battery powered solution (lipo) so that the camera is totally wireless

@meierthomas

3 жыл бұрын

@Greggy Ramirez No but based on what you say should I be looking?

@friendlyfireentertainment

2 жыл бұрын

@Greggy Ramirez I would look into Lithium Ion technology, e.g., 18650/21700 cells. They are safer than lipos and have a higher energy density.

@chrishayes5755

2 ай бұрын

the icing on the cake would be having clear video and not 3 choppy frames per second

Without seeing the video, I can tell this is a great project, just by looking at the casing of the camera.......THIS IS SUPERB!

Great project. Good Job!

Very nice. Good job

Your project is amazing

Hope you get 100 k subs as fast as possible

@ViralScience

3 жыл бұрын

Thankyou, keep supporting😃

Awesome job bro!!

Great Tutorial have following questions : Q> How good is ESP32 Cam ? What is the pixel value of the images (Layman's terms would I be able to recognize faces) Q. How good is your case for external use ? Q. What does the Blynk do ? Q. How can I set-up the UI on my computer screen instead of a phone.

@olafschermann1592

Жыл бұрын

1600x1200. Just use a webbrowser. Blink is just a LED light for illumination of dark rooms in the night.

Thanks so much.

working! thank you!

thnx .cool stuff

Great Tutorial....Thank you.

Great video. Many thanks for your explanation. I had some problems. Led flash blinks continuously (don't know why); I had to change board to AI_Thinker board to load correctly the program. And, finally, don't know to finish app in Blink. Anyway, thanks again.

Thank you pro

Very nice

Really useful.

When programming the ESP32 board, the jumper on the FTDI USB board must be placed on 3.3V! You must change (or check) if the 0 ohm resistor is placed correctly to use the external antenna. You should remove the plastic in front of the camera lens!

@HarshitSingh-mg7zt

2 жыл бұрын

Is removing the plastic compulsory? I don't think it would stop the cam from working...? I was actually unable to make it work, and i also didn't removed it's cover yet...just so that I can return it, incase

@cdbetten7188

2 жыл бұрын

@@HarshitSingh-mg7zt i got it to work, what's your problem I might be able to help

@HarshitSingh-mg7zt

2 жыл бұрын

@@cdbetten7188 thanks😊 But I sorted it out myself already Actually, my board was faulty, so i replaced it, and it worked first try! :)

@satyananda4389

2 жыл бұрын

@@cdbetten7188 What antena do u use?

Can you measure the maximum current drawing at 4V when transmitting the video stream? Thank you

Good job!

I am so happy to see great demo, CAN YOU PLEASE LET ME KNOW WHARE I CAN PROCURE THE BORDS. THANK YOU ONCE AGAIN.

Is it possible to make an access point connection from the esp and stream the video on blynk? So no wifi only ap mode?

Thank You

Can i control multiple smart plugs which is connected to different WiFis from the cloud or blynk app

great video

nice work.

Muito legal.

VERY GOOD

Hi, I'm searching for a way to connect a microphone to this board and stream the audio together with the video. Or would the esp32 be to slow for that??

@user-uz1md4lw2n

3 жыл бұрын

Good idea!

@moxl_

3 жыл бұрын

it's hard to get a proper stream out of these.

Can we hear around sound room and what is range distance maximum ?

congratulations

Adding an external aerial you need to move the position of the 0 ohm resistor next to the aerial socket.

Thank you sir for the great tutorial, may I ask if you have a 3D printing design without external antenna? If so, would you mind sharing it? BTW you got my sub♥️

Hello, I think you forgot to change the resistor position to use the external antenna. You have to put it in the direction of the antenna.

thanks

Would this set up be able to stream locally over a wifi network from a router but no actual internet signal/data?

Great project! I wonder is not needed to soldier some pins to enable the out antenna?

To use an external antenna, just move the resistor next to the connector from the / position to the \ position. It is a 0 ohm resistor so you can just use a solder bridge from point to point if you want.

I have an error in the file app_httpd.cpp, struct box_array_t has no member named 'score' , 'struct mtmn_config_t' has no member named 'type' ', pyramid_times' so I can complie this project. I can't find define of this struct. Is there a library in my compiler arduino ide missing?

Hey!!did you put inside the FTD.

is it possible to add buttons to turn the camera on/off? what would the coding be like?

Hey i bought a esp32cam board but my camera looks different and flatter. What is the camera model you use ?

Brilliant tutorial thank you

great👌

Great work!

super cool app, but I think you should add a field where you can add the IP address to each cam or let the app add it by itself for live stream within the app

it will work only if phone and camera in one wi-fi net or via internet from any poin world?

Hi VS. I followed every step of your tut but came up with "Blynk' was not declared in this scope" What am I doing wrong? Thanks

Failed to compile the code you provided? Error message "'box"_ array_ t {aka struct tag_ box_ list}' has no member named 'score'

Are the pictures stored somewhere, or will they be overwritten? ??

1 felicidades por tu proyecto luego comentarte si vas hacer el video con la nueva app blynk

In blnk i am still looking for image gallery that you resized. Why mine is hiden? Is blynk work in offline?

Sir kindly one video make on face recognition attendance plsss sir pls i'm your big fan pls make a video on face recognition attendance

Videos are saved or not can we check any time footage of paste recording in future at any time

Yes you have to unsoldered existing position int to connect 0 ohms resistor to ext.Thanks to Dronebot

Would be even clearer image if you remove the lens protector tape. Nice project!

I didn't see you demonstrate a live stream, which is kind of a main point if I want to use a VIDEO kamera. If this is only a SNAPSHOT kamera, then I don't see the point in putting it up. Plus, telling us what is the frame rate and size that we can expect would help us a lot.

How do you find the low light performance?

The images are not smooth and buffering quite a bit...any plans to upgrade the cameras with video recording?

*Mst* ❤️

Very GOOOOOOD!!!!

Why do you have the antennas oriented like that?

great tutorial but you flick around the screen so quick its very hard to keep track of what your doing.

Is there a video cam which can work like CCTV and continously monitor. Because here it will just click photos. So if we want to display the live stream in blynk then is it possible?

Hey bro, Should I remove the resistor before connecting the antenna? please help!

Nice

Dude, you forgot to switch the 0 ohm resistor from internal antenna to the external port, my guess is that your pretty little antennas are not working and all of the traffic has been handled by the onboard ones. Also If I were you i would have printed the cases a bit different, i would put a standardized power connector, like microUSB or a barrel jack, when you are leaving the pins exposed like that you are leaving room for error and i bet connecting the DuPont connectors, wrongly won't be so good for the boards. :)

1 at view and like

Good day sir . We can stream and you can listen? Using esp32Cam?

Where can I find the STL for the camera case you use?

I need a long-term timelapse 30fp per day during 10/11 months without maintenance and charge. I did't find anyone did it before. Any recommendation? Thanks

Can it show anywhere over internet??

Hello. I want to know what is the RECORDING mode, if it detects movements of people and what is the duration of the recording?

There is any way to get this with video feed instead pictures feed? Thanks

What did you use to power the esp32 ? I think that I saw extern battery, which model did you use, and how ? :D

@olafschermann1592

Жыл бұрын

USB powerbank. Is 5V

Excellent 👍

Thank you Man🌹🌹 Can I use ESP32-Cam-MB instead of FTDI 232 Module in this project?

I want to reinstall programming in my this esp32 cam from new point bcz some features r not working so what I need to do ?

That's really cool, would you be able to make a tutorial on how to make video security cams, instead of taking single image shots?

@ViralScience

3 жыл бұрын

Sure i will try it

@dhruvsanjay135

3 жыл бұрын

sir actually we can do it using this same code..in blynk app change button from 'pressed' to 'on'..in that way a lot of pics will be captured and will eventually show as a video..small lag will be there but it's fine. @S7 u can try it..it worked for me

@dhruvsanjay135

3 жыл бұрын

sir actually we can do it using this same code..in blynk app change button from 'pressed' to 'on'..in that way a lot of pics will be captured and will eventually show as a video..small lag will be there but it's fine. @S7 u can try it..it worked for me

@wickeddubz

3 жыл бұрын

@@ViralScience Cool project! One important thing: if you use external antenna, you will need to move 0R resistor (aka jumper) to another position, or replace it with small drop of solder. This will disconnect internal antenna and connect external one. 0R jumper resistor is really small and is located right near ext antenna socket. Hopefully this was helpful

good

Hi, can i record all the ESP32 camera videos into the phone memory so i can playback later?

ESP 32 hot temperature , it consumes a lot of power, is there a way to reduce its power consumption?

Hello, have you considered making a video with blynk esp32 cam in streaming? In any case continue I enjoy.

You have to change a resistor to another position to work with the External Antenna not with internal Antenna

@franklinpastranart

3 жыл бұрын

True, I was about to comment this

@wandaniel4596

3 жыл бұрын

Can you explain more about this?

@IMRANKHAN-we9un

3 жыл бұрын

External Antennas are useless in this project. Yo missed the configuration brother.

@wandaniel4596

3 жыл бұрын

Pls anyone explain more about this

@MichaelTayrov

3 жыл бұрын

@@wandaniel4596 Even if you attach an external antenna, the ESP32 will still use the built-it one until you move the sma resistor to a new position. Just google for "esp32-cam antenna resistor"))

It would be really nice to see an example of this using FPV or using SIM module. I I want to implement this in my siege house and there is no wifi connection there. So be able to access it remotely is a bit challenging but I'm sure it is possible. I'm thinking in write a Rest API and host it in AWS, I'm just not sure yet how to build the circuit to it.. hummm...

@GEHDunedin

2 жыл бұрын

Likewise - as a remote webcam solution using 4G, even scheduled/timelapse images this would be ideal, but how to connect/configure a 4G board?

Can both the cameras stream simultanously?

Awesome bro!!

what is the software that you used to in 0:40 ?

Great video thanks 😊. Can you please add the link for the 3D print in the description. Thanks

@johncorcoran38

3 жыл бұрын

I am looking for the same thing

Nice project! It is possible to shot both cameras at the same time?

Is blynk app free to use? If not what is the limit they put to use free maximum buttons?

Hello. Great video!!! With the power bank, how many time it's operative? How much time it's power on?.

What is the range of this streaming?

Can we use jumper wires?