Epoxy Glitter Pen Tutorial Part 2 Update | NEW Tips & Tricks | Leopard Print Pens | Inkjoy Papermate
Тәжірибелік нұсқаулар және стиль
Thank you for watching this EASY DIY epoxy glitter pen tutorial made with refillable Paper Mate Ink Joy pens! In this tutorial, I show how to glitter, epoxy, and personalize these beautiful pens using vinyl. These pens are so incredibly easy, are so much fun to make, and make the best of gifts! This DIY tutorial video is designed to explain just how simple it can be to glitter and decorate anything, even a pen!
We have officially launched our KCC Glitter website, check it out here! kccglitter.com/
Please join my Facebook community! / epoxytumblersandpens
About me: I have been making epoxy tumblers for approximately five years and have decided to share my methods with aspiring cup makers. Everyone's methods are different and I just want to share what I have found to work best for me!
Buy me a Coffee 💕 No pressure at all but if you would like to help support the channel and the tutorials I create, you can use this link to leave a tip. 💕 www.buymeacoffee.com/KCCyoutube
Please feel free to comment if you have any questions at all! Below is a list of links to some of my favorite products that I use the most to make my tumblers.
If you enjoyed my video, please give it a thumbs up and hit the subscribe button to see more videos like it!
Recommended Glitter:
KCC Glitter: kccglitter.com/
Recommended Epoxy:
www.flynnsisterssupplyshop.co...
**Use DISCOUNT CODE "KCC" to save 10%!**
Tumbler Supplier:
MakerFlo - bit.ly/3RQMflM
Products used/recommended:
Paper Mate Pens - amzn.to/3o0Lh7n
Pen Refills - amzn.to/3tSmaYk
More Pen Refills - amzn.to/3s0njuV
Wooden Dowel Rods - amzn.to/37WBrOD
Faux Rizzle Epoxy - amzn.to/3nZFM9h
Counter Culture Epoxy - amzn.to/3pRzFW6
Finger Cots - amzn.to/3qprjo0
Epoxy Mixing Cups - amzn.to/3s200C0
Oracle 651 Vinyl - amzn.to/399SUCM
Cup Turner - amzn.to/3l1xBaw
Turner Foam Inserts - amzn.to/2XkuEZ7
220 Grit Sandpaper - amzn.to/3rYKC9j
Craft Knife - amzn.to/3pXOlCk
Decal Applicator - amzn.to/2MFMOm2
Vinyl Weeding Tools - amzn.to/38jAaBq
Transfer Tape - amzn.to/2Xl95HC
Blinggasm Waterslide Paper - amzn.to/3fcRiL8
Butane Torch - amzn.to/3pM06wr
Rust-Oleum Gloss Clear Spray Paint - amzn.to/2HfFKKm
Rust-Oleum Flat White Spray Paint - amzn.to/3nILLz1
Gloves - amzn.to/36QSrUP
Silicone Mats - amzn.to/32YW5Lf
Cup turner motors - amzn.to/2IWXBGI
Plastic mixing cups with measurements - amzn.to/3lLARrG
Medicine cups - amzn.to/3kQFQWC
Zippo Butane Fuel - amzn.to/3lT39Ra
Cup Turner Foam Inserts - amzn.to/2UKBQfE
Painters Tape - amzn.to/3lRGuVa
Popsicle Sticks - amzn.to/3nG33fU
Connect with me on Social Media!
kristicustomcreations
kristicustomcreations
Video music from Epidemic Sound, you can try a free 30 day trial by using my link! www.epidemicsound.com/referra...
*Disclosure: I only recommend products I would use myself and all opinions expressed here are my own. This description box may contain discount codes and affiliate links that at no additional cost to you, I may earn a small financial benefit. As an Amazon Associate I earn from qualifying purchases. This helps support my channel so I can continue to provide you with inspired and focused content. Thank you.
Пікірлер: 1 500
These are beautiful! I'd just like to say thank you. I love listening to you. you get the info out there, you don't mess around with a bunch for talk that mean nothing to the tutorial. loved that your husband was being creepy, cracked me up. Thank you.
@KristisCustomCreations
3 жыл бұрын
Aww! Thanks! I hope everyone finds my tutorials helpful! I love getting feedback and you seriously made me smile! 🥰
@amyaustin513
3 жыл бұрын
@@KristisCustomCreations Well I do't usually take the time to comment. But when I like something I say it. Also I feel people get too many negative notices to criticism and I am a huge firm believer in women supporting women and not knocking them down, help lift when up and support is usually a better method. Also I hope you get a commission cause I just put like 5 things from your list from amazon into my cart. LOL and I don't usually do that either.
@KristisCustomCreations
3 жыл бұрын
@@amyaustin513 I greatly appreciate it and I completely agree, there needs to be more positivity and women supporting women! Amazon does give a commission for anything ordered through my links. You have completely made my day, I hope you have a wonderful evening!
@KeautyDesigns
3 жыл бұрын
The “creepy husband” made me laugh too! I have a question, Kristi - why is everyone using this particular brand of pen? I'm just wondering if there are other brands that can be used also! Thank you!!!
@KristisCustomCreations
3 жыл бұрын
Katie, we are using this brand of pen because the way they come apart and go back together works well for what we are doing. This brand of pen also writes really well and is refillable. I've seen a couple of people use other pens but I honestly don't know what kind they were or how easy they were to epoxy and glitter.
I really like tour tutorial! You are straight to the point and speed up on all the right parts!! Thank you for posting!!
@KristisCustomCreations
3 жыл бұрын
Thank you so much and thank you for watching! 🥰
Great tutorial, to the point, and easy to understand! THANK YOU!!!
@KristisCustomCreations
3 жыл бұрын
Thank you so much!!! I hope you found it helpful! Thanks for commenting!! :)
Thank you for a great tutorial and make it look easy, but it does also appear to take a lot of patience. I’ve never done tumblers or pins or anything like that. I’m excited to get started. I also appreciate the fact that you put all of your supplies and where to get them in your comments. This helps immensely. I’m looking forward to watching your future KZread videos.
Thank you so much for posting this video and sharing your talent, how to, and suggestions on your process! I found this the most helpful video I’ve seen yet. Thank you again for sharing with all our fellow crafters. I’m new to this and going to attempt my first set of pens today or this weekend!
You’re amazing thank you for this video. Us fellow crafters appreciate it 🥰
@KristisCustomCreations
3 жыл бұрын
You're very welcome! 🥰 Thanks for watching!
Thank you for this video. Very informative and not too long!
@KristisCustomCreations
3 жыл бұрын
You're very welcome and thank you for watching! It's much longer than my normal videos but I wanted to get all the necessary info in. 🥰
Love your video. You make it so simple and no unnecessary blabbing.
@KristisCustomCreations
3 жыл бұрын
Thank you!!! I definitely try to stick to the point. 🥰
Thank you for a very detailed video. Yours was the first one to show how to replace the inside of the pen!
@KristisCustomCreations
3 жыл бұрын
You're very welcome! Thanks for watching! 🥰
You did a great job adding all the details explaining the process and pro tips. Thank you for making the video!
@KristisCustomCreations
3 жыл бұрын
Thank you so much And thank you for watching!!!
So jealous of how easy you just weeded that vinyl!!! I have been having the hardest time trying to weed small letters! I've tried all different pressures and I just can't get it right! These pens are so beautiful! I've got to try it now! Thanks for the video😘
@KristisCustomCreations
3 жыл бұрын
Thanks for watching! I have the Silhouette Cameo 4. I have found that this machine cuts better than my older silhouette. Thanks for watching! I would love to hear how your pens turn out!
@kyoung7924
3 жыл бұрын
@@KristisCustomCreations of course! So excited to try. They are supposed to be arriving today. I use a Cricut. Never tried silhouette but watching you weed makes me want to try🤣😂. Thanks again
@KristisCustomCreations
3 жыл бұрын
🥰🥰🥰
@lemonyann
3 жыл бұрын
I have the worst time too.
@pamelaparker970
3 жыл бұрын
@@kyoung7924 on cricut - try reverse weeding for the smaller letters
Thank you so much Kristi! I am so excited to try these out! The foam cup insert is genius! 💕
@KristisCustomCreations
3 жыл бұрын
You are so welcome!!!! Thanks for watching and for the comment!!!
I’m obsessed with your work and your calming nature. I can’t wait to try this!!!
@KristisCustomCreations
2 жыл бұрын
Awww! Thank you so much! 🥰
love seeing this be done with chunky glitter.. Now I feel more confident to try it instead of just fine glitter.
@KristisCustomCreations
3 жыл бұрын
Thanks for watching and for commenting!!!!! 🥰
@shanllmiller35
3 жыл бұрын
Same here!!!!
Thank you! I love the idea about putting them on the foam insert. Great video thanks for sharing.
@KristisCustomCreations
3 жыл бұрын
You're very welcome!!! Thanks for watching! 🥰
I enjoyed watching both of your pen tutorials. These pens are really lovely! Great job on the video AND the pens!
@KristisCustomCreations
3 жыл бұрын
Thank you so much!!! 🥰
Oh and quick tip, I have a similar vinyl squeegee and I figured out those two little raised areas are perfect for holding the pen while you apply vinyl!
@KristisCustomCreations
3 жыл бұрын
Good to know!!!!!!! Thank you for the tip! 🥰
@KristisCustomCreations
3 жыл бұрын
Monica, So.. I just want to say I tried your tip about using the raised areas on the squeegee to hold my pens while I apply vinyl and I gotta say... YOU ARE A GENIUS!!!!! This was an amazing tip! Thank you!
@kimberlycombs5431
3 жыл бұрын
🙄I just made that same comment lol
Awesome tutorial; clear precise and easy to follow - two thumbs up! :)
@KristisCustomCreations
3 жыл бұрын
Aww! Thank you! 🥰🥰🥰 Thanks for watching and commenting!
Great tutorial, thank you! I love the colors you chose for these too. So cute
@KristisCustomCreations
3 жыл бұрын
Thank you so much! 🥰
Thank you so much for sharing! I just recently started making tumblers and I wanna try pens because someone asked me and your way was the easiest to understand 🙃 thank you
Hi i’m Sarah Just found your channel your tutorials are so informative and easy to follow i love that you give other tips as you go. Look forward to seeing more. ❤️
@KristisCustomCreations
3 жыл бұрын
Aww! Thank you so much! I'm so glad you find them helpful! 🥰 Thanks for watching!
@sarahmoore1275
3 жыл бұрын
@@KristisCustomCreations ❤️
This is one of the best tutorials thank you so much, i love the format! You got right to it and it was easy to follow along, accept my husband was at work so he couldn't stand around and watch LOL
@KristisCustomCreations
3 жыл бұрын
Aww!!! Thank you so much! 🥰 I'm so glad you found it useful!! Thank you for watching and commenting!!!
Thank you. These are beautiful. I love how you attached to the turner, first I’ve seen this method and it’s great!
@KristisCustomCreations
3 жыл бұрын
Thank you so much and thanks for watching!!!! :)
Awesome to see you do them with chunky glitter! I was thinking it would get too thick with chunky. I love doing these!
@KristisCustomCreations
3 жыл бұрын
The chunky is SO pretty on the pens!!!! just make sure to get the glitter as flat as possible before you epoxy over the chunky glitter.
Great tutorial, Love how you get straight to the point and added the size of name! But I don’t know if I missed the size of cheetah prints I was wondering if you can tell me what size you used, yours came out perfect!
I enjoyed your video. You were saying you could heat the clip part to get it to come off. You could also heat the blade. That may help cut through the plastic a little easier.
@KristisCustomCreations
3 жыл бұрын
That's such a great tip!!!!! Thank you!!!!!!! 🥰
@karolosteen3313
3 жыл бұрын
I used my heat knife on my pens today and worked like a charm :)
@KristisCustomCreations
3 жыл бұрын
@@karolosteen3313 good to know!! Thanks!!
Theses are so cute 🥰 Thanks for explaining everything step by step- i like videos like yours 😊 Sometimes I need more information and I spend hrs trying to figure out some steps like the sizes you used for the names so THANK YOU for putting that in your video 🥰🥰 Have a blessed day
@KristisCustomCreations
3 жыл бұрын
You are so very welcome and thank you for the sweet compliments! 🥰 You have a blessed day also!
You bet I will try this! I just love all this creative fun ideas and products
@KristisCustomCreations
3 жыл бұрын
Thanks for the comment!!! Please let me know if you have any questions at all! 😊
Mount a paper towel holder under your turner some where and hook your transfer tape to it for easy measuring
@KristisCustomCreations
3 жыл бұрын
That's an awesome idea! Thanks for the tip! I usually sit at my desk when I do decals but for this video I did the decals at my tumbler work bench which made things a bit more difficult. But seriously... That's such a great idea and I'm def going to have to do that!
Thank you for the inspiration. Would love to know how you built your turners, do you have a video for that also?
@KristisCustomCreations
3 жыл бұрын
Thank you for watching! I don't have a video on my turner setup but I am planning to make one soon 😊
I’m so glad I came across your video. This was definitely helpful I’m new at making pens. I just love this tutorial. Out of all the video I been watching yours is very detailed & well organized
I'm so in love with your tutorials
@KristisCustomCreations
2 жыл бұрын
Aww, thank you! 🥰
You can also find the 1/4 inch dowels at Dollar Tree! Just a tip :)
@KristisCustomCreations
3 жыл бұрын
Good to know!! 😉 Thank you!!
@2tier1776
3 жыл бұрын
Home Depot has them as well for cheaper than the dollar tree
@KristisCustomCreations
3 жыл бұрын
@@2tier1776 good to know! Thanks! 😉
Thank you SO much!!! Just ordered the pens. I am so excited to try these!!
@KristisCustomCreations
3 жыл бұрын
You're very welcome! Thanks for watching! 😊
THANK YOU KRISTI!! I had told my daughter about the vinyl before I watched this one!🔥🔥🔥💜💜💜
@KristisCustomCreations
3 жыл бұрын
You're very welcome, thanks for watching! 🥰
Awww that's the cutest your husband watching his favorite lady. Doing her magic with beautiful glitters(◍•ᴗ•◍)❤
@KristisCustomCreations
3 жыл бұрын
He's a mess 🥰
This was very informative, Thank you. I’m going to try my hand at some pens tomorrow. I have the same work bench for my turners. Can I ask where your silicon mats are from?
@KristisCustomCreations
3 жыл бұрын
I purchased my silicone mats on Amazon, there's actually a link to them in the description box. They came in a pack of 4.. they are seriously the best thing! They help catch glitter and keep things from getting too messy.
@trustori1633
3 жыл бұрын
Can I ask where you got turners?
Your tutorial has been the best one I have watched yet! Thank you :)
@KristisCustomCreations
3 жыл бұрын
Awww!!! Thank you so much!!! 🥰
Beautiful! thanks for sharing all the details, can't wait to try this
@KristisCustomCreations
3 жыл бұрын
You're very welcome! Thanks for watching and commenting 🥰
The link for the turner inserts is sold out, just thought I'd let you know so you can post another one. :)
@KristisCustomCreations
3 жыл бұрын
Thank you! 🥰
Woah, I just found your channel by random and fell in love with this video!
@KristisCustomCreations
3 жыл бұрын
Aww, thanks!!! And thanks for watching!!! 😊
@ladonnasturgeon8111
3 жыл бұрын
Same!!!!
@KristisCustomCreations
3 жыл бұрын
@@ladonnasturgeon8111 Thank you so much !!!
@brandichaudoin9047
3 жыл бұрын
Same.
@KristisCustomCreations
3 жыл бұрын
@@brandichaudoin9047 Thank you!
Your tutorial was perfect! I like the close-ups so that you can see what you’re doing and very well explained.
@KristisCustomCreations
Жыл бұрын
Aww, thank you so much! :)
Great Tutorial, very informative and easy to understand. Thank you for sharing, keep up the great work!
@KristisCustomCreations
3 жыл бұрын
Thank you so much!!! 🥰
I was wondering how long you have to wait for these to cure before you can use them?? Do they need the same amount of time a cup would to completely cure seeing as how you're using epoxy? I'm just now getting into these pens........always a bit late to the party ...that's me!! .LOL! But these are so easy after watching your videos over and over. I've watched a few others but I like the way you teach this in your tutorial. I have watched your other videos too and have also subscribed. Thank you for sharing this. I can't wait to get started!
@KristisCustomCreations
3 жыл бұрын
Aww! Thank you so much! 🥰 Better late than never! 😜 You should always wait the recommended 72 hours to allow the epoxy to fully cure so that it isn't toxic.. same with the Tumblers. If you haven't yet, be sure to check out the Facebook group. We have some really amazing Crafters in there who are awesome and super helpful! Thank you so much for watching and subscribing! ❤️ facebook.com/groups/epoxytumblersandpens/?ref=share
I love your tutorial! But WOMAN you scared that living crap out of me with that knife!! My anxiety went way up! I use my Dremel tool for that part and the 2 little hearts on the back.
@KristisCustomCreations
3 жыл бұрын
Lol! A dremel is a great idea.. I have changed it up how I cut off the nub since filming the video 😉
@Heart2HeartCreations
3 жыл бұрын
Ohh that’s a great idea!
Great tutorial and the pens are beautiful! Glad to find a good tutorial for refillable pens. Can't wait to try this!
@KristisCustomCreations
2 жыл бұрын
Thank you!
Just ran into your channel today. I Absolutely love your style of teaching from beginning to end. I will def be trying these soon. Thank you so much!!
@KristisCustomCreations
3 жыл бұрын
Aww!!! Thank you so much! I'm so glad you found my channel and look forward to posting many more videos. 🥰
Hi, just curious. Do you have to spin them?? With so little epoxy on them can’t you just hang to dry like on a tumbler with the glitter epoxy method. These are beautiful by the way ☺️☺️
@KristisCustomCreations
3 жыл бұрын
Thank you! I think that if you did the hang method they probably wouldn't turn out as smooth. By spinning the pens, it lets the Epoxy spin around the cup as it dries, leaving a glass like surface.
@Monie_Are
3 жыл бұрын
Any suggestions on how to do this if we don’t have the full setup with something that can continuously spin them ?
So I don't have a turner arm that would hold the pens. Can I do hang method or use all uv resin instead of regular epoxy?
@KristisCustomCreations
3 жыл бұрын
I'm not sure how to hang method would work because with the pens spinning, and makes the epoxy super smooth. Also, I haven't tried UV resin. I don't think that UV resin is self-leveling, so I'm not sure if it would work. But if you do decide to try it with UV resin, please let me know how it works out.
Omg you have truly done a great job on this tutorial. I have been searching how to do this for a year on tik Tok and everyone is gate keeping the information. Thankyou so much for this video. I am trying this on 2 pens first so wish me luck. Definitely will keep you posted on how my first pens turn out. Thanks again for your help.
@KristisCustomCreations
2 жыл бұрын
You're very welcome!!! ❤️❤️❤️
These are beautiful ❤. My favorite tutorial so far!!!
@KristisCustomCreations
Жыл бұрын
Aww! Thank you so much! ❤️
Hi, Thank you so much for your video. I'm just starting out so I'm not sure how much you would charge for a Glitter Pen. Could you help me out with a guide??
@KristisCustomCreations
3 жыл бұрын
I currently charge $10 each for the pens.. if someone wants a very intricate design then I would charge more
What’s the size for the decals you did? I’m learning.
@KristisCustomCreations
3 жыл бұрын
The names are one half inch by 4 in and the leopard print is approximately 1.5 in by 2 in. You may have to adjust the size of the leopard print slightly though depending on how thick your epoxy / glitter is.
I love watching you work! Awesome video and the pens are beautiful
@KristisCustomCreations
3 жыл бұрын
Thank you so much! 🥰
Wow! Thank you for sharing your technique!
@KristisCustomCreations
Жыл бұрын
You are so welcome! Thanks for watching!
Where can I find the I love glitter font thank you ❤️
@KristisCustomCreations
3 жыл бұрын
Dafont.com 😊
@mariajessie5939
3 жыл бұрын
Thanks😊
@donnareynolds2089
3 жыл бұрын
Dafont.com.and how to get the hearts at the end I believe its shift with -, I love this font
Love this! Do you have the dimensions you used for your name & leopard prints?
@KristisCustomCreations
3 жыл бұрын
Measurements for the names are .5"x4" and for the leopard print it's 1.5"x2"
@joygarrison450
3 жыл бұрын
Kristi's Custom Creations what font did you use!!! Fantastic tutorial!!! Just subscribed!!
@KristisCustomCreations
3 жыл бұрын
@@joygarrison450 thank you!! The font is called "I love glitter" from dafont.com 😊
@joygarrison450
3 жыл бұрын
Kristi's Custom Creations Thank you!!!! I was trying to figure out how to do the hearts!! I have the font..... got the solid heart but not the swooping heart🤣
@KristisCustomCreations
3 жыл бұрын
@@joygarrison450 if you put this symbol " | " (it's like a straight line) then it will give you the hearts 🥰
This was the best tutorial I've found for pens!
@KristisCustomCreations
2 жыл бұрын
I'm so glad you found it helpful! 🥰
This was so helpful. Thank you! I am about to get started practicing on the pens I have. I bought a whole color pack of the inkjoy pens when I started college. I want to glitter them their coordinating color.
@KristisCustomCreations
3 жыл бұрын
Thanks!!! I'm so glad you found it helpful! 🥰
Hi Kristi! I need your advice....What is a good price to sell these pens?
@KristisCustomCreations
3 жыл бұрын
Hey there!!! I sell mine for $8 just plain glitter and $10 with personalization. The leopard pens are also $10 because they have vinyl on them. 😊
@whitfirstladyrobinson7864
3 жыл бұрын
Omg I’m low balling myself... I’ve done mines I love them.... so pretty I used the same thing love those colors
@vivelavidalivelife3617
3 жыл бұрын
@@whitfirstladyrobinson7864 general tip in selling anything. Take to cost to make and times it by 2.5 or aleast times it to where u can sell for 50% off and still make a profit.
@ChellesBeads
3 жыл бұрын
Thank you so much Kristi for an amazing tutorial. The pens come out so beautifully!!!
@KristisCustomCreations
3 жыл бұрын
@@ChellesBeads Thank you so much!
Hi thanks for the video but I will say at the beginning when you're cutting things you need to cut away from you you scared me the whole time LOL
@KristisCustomCreations
3 жыл бұрын
Lol, yeah I changed the way I'm cutting them now. 😊
@melissakubic1544
2 жыл бұрын
I thought it was just me! I was holding my breath during the entire craft knife section!
@LM-te8hu
2 жыл бұрын
I learned the hard way. I’m still healing 6 months later. I refer to my finger as the exacto finger.
Thank you for this awesome tutorial! ❤
@KristisCustomCreations
3 жыл бұрын
Aww, thanks!!! Thank you for watching!! 🥰
Thank you - can't wait to try these - I've been collecting supplies
@KristisCustomCreations
3 жыл бұрын
You're very welcome and thank you for watching! 🥰
Omg, I was a nervous wreck the whole time you were using that exacto. Please do it away from your skin on camera, for my anxieties sake. Lol
@KristisCustomCreations
2 жыл бұрын
Yes, since filming the video, I've changed the way I cut 😉
BEAUTIFUL VIDEO... LOVE IT Thank you so much for sharing this great video... and all the great information in your description box!!!!
@KristisCustomCreations
3 жыл бұрын
Thank you!!! 🥰
Thank you for this tutorial. Cannot wait to try this!
@KristisCustomCreations
3 жыл бұрын
You are so welcome! 🥰 Thank you for watching and commenting!
Love them!
@KristisCustomCreations
3 жыл бұрын
Thank you! 🥰
Very beautiful. Can’t wait to try this
@KristisCustomCreations
3 жыл бұрын
Thank you! 🥰
Love your videos, thank you for always making it ook and sound so easy!!
@KristisCustomCreations
3 жыл бұрын
Thank you🥰🥰🥰
Great tutorial! Thank you!!
Loved it…. Cannot wait until I feel comfortable to do my first one….
I love them! Thank you!
@KristisCustomCreations
3 жыл бұрын
Thanks for watching!
Oh my goodness! I'm so glad to have found you :) A friend was telling me about the glitter pens, so, I came to youtube, typed it in search and POOF! there you are with such awesome videos on how to create these beauties AND I am glad you did this second video; first one I could barely hear you and speakers were at 100% :( This one was much easier to hear :) You do a FANTASTIC job in teaching us how to do this!!
@KristisCustomCreations
3 жыл бұрын
Awww! Thank you! I'm glad you found me too! I'm slowly learning how to edit my videos so they will get better and better over time. 😊 Thank you for watching my videos! 🥰
Your area is so clean! 👍
@KristisCustomCreations
3 жыл бұрын
Thank you!
You are a great teacher 👍
@KristisCustomCreations
3 жыл бұрын
Thanks so much and thank you for watching!!!
These are AWESOME!!!!
@KristisCustomCreations
3 жыл бұрын
Thank you! 🥰
Can't wait to get mine!
@KristisCustomCreations
3 жыл бұрын
Yes!!! Yours will be finished very soon!!!!!
Ty. Now I want to make some for my Stone Frog hobby on my fb page !!! Can't wait
They are so cute! I can’t wait to try them.
@KristisCustomCreations
3 жыл бұрын
Thanks!!! They really are so much fun to make! 🥰
Absolutely beautiful
@KristisCustomCreations
Жыл бұрын
Thank you! 🥰
Okay now I’m motivated to try something new!! Subscribed and liked!! Thanks for the tutorial!!
@KristisCustomCreations
3 жыл бұрын
Thanks for watching, liking, and subscribing!!!! 🥰
Great tutorial also, thank you!
Great Video! Beautiful pens!
@KristisCustomCreations
3 жыл бұрын
Thank you! 🥰
Thank you for the video. Great idea, I will have to try these.
@KristisCustomCreations
3 жыл бұрын
You're very welcome! Thanks for watching!
Thank you, I just love your videos!!
@KristisCustomCreations
3 жыл бұрын
Aww! Thank you so much! 🥰
I would agree with RS Barrett. You made me so nervous as you made the cuts. My son teaches Industrial Technology and always tells his students to cut away from you for safety never towards yourself. But I also have to tell you that I love the details you give in your demonstrations. It's great that you give the size you cut the vinyl. I went back and watched your first video. Thank you for all your information. I am picking up some pens this weekend.
@KristisCustomCreations
3 жыл бұрын
Thank you :) I hope you have a wonderful weekend and good luck with your first set of pens!
@Jmats78
3 жыл бұрын
@@KristisCustomCreations Ha! Ha! I must say I was a little nervous, too, watching you cut towards you instead of away. I speak from experience, sadly. My husband bought me a pair of gloves which protect your hands in case you slip with the knife. I guess he could not stand the sight of blood 😁
Love this. Just ordered the pens from amazon! Can’t wait to make these!
@KristisCustomCreations
3 жыл бұрын
Thanks for the comment!!! Good luck making your pens!!!
Great tutorial
Ohh wow these are beautiful I going to try make one xx
@KristisCustomCreations
3 жыл бұрын
Thank you!!
Very informative video. This was great to watch. Thank you. Now I wanna make a pen. 🥰🥰
@KristisCustomCreations
3 жыл бұрын
Thank you!!!!!
❤love them
@KristisCustomCreations
Жыл бұрын
Thank you!
Very well done video. Can't wait to try. TU!
@KristisCustomCreations
3 жыл бұрын
Thank you so much! 🥰
These are amazing. I gotta do it lol. Bravo👏🏻👏🏻👏🏻
@KristisCustomCreations
3 жыл бұрын
Thank you! 🥰
Thank you for sharing your informative info.
@KristisCustomCreations
2 жыл бұрын
You're very welcome! ❤️ Thanks for watching!
Amazing video!!!
@KristisCustomCreations
2 жыл бұрын
Thank you! 🥰
Super Beautiful 🤩
@KristisCustomCreations
3 жыл бұрын
Thank you so much!
Thank you, thank you, THANK YOU!! Very informative and easy to follow! Also, thank you so much for showing how to put the pen back together because that was my biggest fear in these pens 🤣🤣
@KristisCustomCreations
3 жыл бұрын
Lol!!!!! You're very welcome!!!! 🥰
Love this video, thank you
@KristisCustomCreations
3 жыл бұрын
Glad you enjoyed it!
I'm so excited to make these! Thank you for making this video!
@KristisCustomCreations
3 жыл бұрын
You're very welcome! Thanks for watching!
@julietessenyi1102
3 жыл бұрын
@@KristisCustomCreations I downloaded the font and love it, could you tell me how you added the swirl hearts to your name? Sorry if that's a dumb question! :)
@KristisCustomCreations
3 жыл бұрын
@@julietessenyi1102 it's not a dumb question at all. There's a cheat sheet that comes with the download that tells you exactly what characters to use. So to put hearts next to your name, you would type it as * Julie * to put the heart flourishes on each end of your name, you would type |Julie| . I hope that makes sense.
@julietessenyi1102
3 жыл бұрын
@@KristisCustomCreations thank you!!
@KristisCustomCreations
3 жыл бұрын
@@julietessenyi1102 you're welcome!!!
Hi Good morning ☀️ Thank you for the video ✨
@KristisCustomCreations
3 жыл бұрын
Good morning! Thank you for watching! 🥰