Sos un crack! Me salvaste las vacaciones 🙌🏼

thank you very much nice vid

Somebody should invent an adapter for a cordless drill / driver and be done with the rope-spring contraption.

Is it mandatory to preload the spring 2 turns? Or will 1 turn be enough? My new spring had a wire band holding in in prewind. Can I just leave the wire on , set the spring in place and the cut the wire that holds it in prewind? By the way, nice video. Thanks

Good video man what is the model number for that ATC 90 recoil? I have 86 70 and that little slider ratchet gear broken the things of Fortune from Honda if you can even find it. Any information would be appreciated thanks man.

Did you remove the black cover before painting? If so, how does it come off?

@VintageHondaMinis

10 ай бұрын

It has a metal tang inside housing that uses adhesive/melted plastic to keep the emblem cover place. Remove that buildup of adhesive/melted plastic and then pull plastic cover off housing

@dustingermain7037

10 ай бұрын

@@VintageHondaMinis OK, thank you very much!

Does anyone where I can get all the parts needed to rebuild. I only have the cover with the Honda logo. There is nothing inside. Looked on eBay but only see ATC, and Polaris. Nothing for the (1986) TRX 70.

@VintageHondaMinis

2 жыл бұрын

Going to be difficult to find all those parts for a trx70 pullstart. Best thing to do is buy a complete one or convert to trx90 pullstart

What kind of grease you use?

@VintageHondaMinis

3 жыл бұрын

Hi. Just a general good quality bearing grease

There is a much easier way to assemble those TRX70 Recoils. They are the weakest recoil of all the Honda ATV recoils mfg. The plastic Honda used became brittle with age and heat, the spool and grabber dog crack/break.

@VintageHondaMinis

3 жыл бұрын

Hi - Curious to know your approach to getting a "new" unbound spring in place

@artardpoptarts

3 жыл бұрын

Curious myself atcquad

@lincoln-sn3md

22 күн бұрын

What size spring is it