Enduro engineering ebike stand Buy here: www.enduroeng.com/p158352-mtb... 10% off coupon code - EEMTB10
Жүктеу.....
Пікірлер: 87
@EMTBReview9 ай бұрын
Enduro engineering ebike stand - 10% off coupon code - EEMTB10 Buy here: www.enduroeng.com/p158352-mtb-stand
@cjcruz111
5 ай бұрын
Hey! Thanks for the videos. The coupon code isn’t working, Do you have a new one?
@davidhamilton82 Жыл бұрын
Brilliant video. At last an enthusiast who understands the fact that e-bike’s are heavy and the awareness of trying to get one onto a traditional stand. Thanks so much.
@mxengineer1 Жыл бұрын
Always appreciate your review videos! The Scorpion stand came with my 2021 Intense Tazer MX Pro e-MTB and as noted in other comments works fine with the Shimano EP8 motor. I do like the concept of the Enduro Engineering stand and seems to work well. I also use the low cost flip the bike over method too!
@Todd66 Жыл бұрын
Super nice stand. Good idea too. I’m digging your ebike. Money is not bad. I bought a wheel chock I use as a stand, it was $80….so $150 for a actual stand for maintenance is doable for sure. Good video Sir
@Esteb858 Жыл бұрын
I have a Shimano EP8 equipped ebike and the scorpion stand works just fine with it. The Scorpion stand comes with different size sleeves to accommodate different crank holes so I use the smallest plastic sleeve and it fits perfectly
@saulcastro2990 Жыл бұрын
I got one, true you can’t work on the front wheel or fork but most of the time you’re working on the rear of the bike, I lube and clean my drivetrain on every ride, also it comes handy when you wash your bike. Good quality stand, not your full stand but a full stand for an ebike is going to cost you double the price. Thanks for the review Francis!
@CharlesBurnsPrime Жыл бұрын
I don't even need a bike stand, but I appreciate a quality review as a bicycle enthusiast, nerd, and engineer.
@brucecrair8818 Жыл бұрын
Muc-off's ebike drivetrain tool works wonders! Alternatively, you can just put a hex-wrench in (although they get stuck when you try to pull them out - PITA). With the drivetrain tool, I've had no problems running the chain backwards for lubing the chain.
@bradsanders6954 Жыл бұрын
My dual suspension xc bike, weighs 24.5 lbs.........My Canyon e bike weighs 52 lbs. Its very noticeable. For a normal stand , the trick is to lift the e bike by the back wheel, its not too hard. It can be slid into the stand pretty easy like that. The EE stand, the bike is close to the ground, so your back on your knees working on the bike.
@SDmountainbiker Жыл бұрын
Just pulled the trigger on this. Arrives early next week!
@jeanmarc_in_Hudson Жыл бұрын
Good one! Long time no see... nice to have you back here 😊
@JamesRobertMTB Жыл бұрын
This is one crazy design. Looks super cool though!
@maxieboi9910 ай бұрын
Thanks for this francis! I just ordered this stand! Looks very easy to use.
@EMTBReview
10 ай бұрын
Hope you like it!
@harindergill7221 Жыл бұрын
Quality review, pertinent And crisp. Thanks
@tommyputt184 Жыл бұрын
I converted a cheap light motorcycyle stand with bigger swivel wheels to lift the ebike under the swing arm. It's very easy to use but you cannot work on front wheel unless flip bike over. I usually have the front tire off because I can't fit the bike in the small suv with tire on.
@apatriotofhopedanjohn4781 Жыл бұрын
GENIUS IDEA 💡 Thanks, tried ordering but out of stock. Will try again and I’ll use your code. Thanks again 🙏
@apatriotofhopedanjohn4781
Жыл бұрын
@@EMTBReview Hey 👋 Appreciate ya, yes sir I ordered yesterday, they said have new shipment coming and will ship probably in couple of weeks. Thanks again and Blessings to ya 🙏
@shafiqjan1474 Жыл бұрын
That looks sweet, I may need 1 or 2 👍
@gary7vn Жыл бұрын
Belt drives and internal gearing are the future of e-bikes.
@NaZ-rs1dd Жыл бұрын
good presentation 👏 thx
@AlphaDeltaRomeo10 ай бұрын
Bro that last shirt is sweet! You need to go back and get the skull and bird of paradise one too!
@davemabbutt Жыл бұрын
Francis, excellent review brother! That stand looks great, but the lube bottle concept even better. Hope you are doing well. Am sure you are still hammering. Hit me up if you get out to Maui Dave M. (mtbr emp no. 1:)
@xavierguzmanjr549511 ай бұрын
I noticed both Canyon shown here and the Enduro Engineering KZread-featured Husky are factory bikes equipped with internal mid-drives. They have a relatively flat, curving bottom bracket would rest nicely on the pad with the rubber bumpers. Conversions using a BBSHD or CYC external motors would see these hang outside the BB next to and below it. Where these motor would rest on the pad are usually heatsink fins and they are irregular in shape and far from uniform. I wonder if the stand has been tested with these external mid-drives for stability.
@jamble7k Жыл бұрын
if your ep8 uses a shimano chainring you can use a t25 torx to lube/clean the chain
@PabloH Жыл бұрын
since i bought my 2022 orbea rise, i am now poor so i got creative on no longer buying anything expensive so i would like to share something that is now invaluable to me when i clean and lube my emthbike. velcro. yes velcro! i tie it up on the crankarm to the crank and while it is on a bike stand that you put the rear wheel in. simple and very inexpensive i should say. however... as always, thank you for all the video tips and new gadgetries you always present. i truly appreciate it and keep it coming. great work!
@zlatkoa3198
Жыл бұрын
Hahahaha. I too ran out of money after purchasing my Levo last year and am also an avid promoter of the Velcro system. 😂😂. I do like this stand though so might start saving.
@dongkapuyawn5107
Жыл бұрын
do you have a photo of this setup? i too have a levo sl lol
@alextownshend Жыл бұрын
Love the vid and this stand. Been waiting for the right time to pick one up, but looks like it went up to $175 in 3 mo. Maybe your promotion was so good that demand went way up!
@EMTBReview
Жыл бұрын
Demand went up for sure. And they changed production lines for better consistency and volume.
@ilovephotography1254 Жыл бұрын
Most bike work-stands are far from perfect for e-MTBs. Finding a place to place the mounting jaws can be tricky. The head on work-stands tends to slip if you try to swivel and lock the bike front up. Even though I have a new full sized work-stand I'm tempted to make a purchase. This bike stand is full of functionality and extra portable. I like the idea for using it to park my bike at home. This tool is not cheep, but appears to have great value.
@crisedwardpimentel8137 Жыл бұрын
Hi, have you tried on other ebike ? Like the heckler? Thanks
@atlantawebster Жыл бұрын
Very informative, Thank U.
@EMTBReview
Жыл бұрын
You are most welcome.
@dutch30007 ай бұрын
Nice video. Thanks. Btw: 1:50 min ...I think connecting the crank arm (with a zip tie) to the chainring should fix that problem.
@TeamCykelhold Жыл бұрын
in a normal stand, you release the dropper and let the bike hang from the saddle. If you need it more secure, you can also make a small rail to lock in the front wheel but for most jobs it isn't necessary.
@EerieVonIII8574 Жыл бұрын
Good video Frances, thank you
@thim8009 Жыл бұрын
That looks a lot slicker than my 2 ropes from the ceiling with blakes hitches.
@voodoochild67412 ай бұрын
Looks like and excellent value. One question , will the Surron/Talaria ,Stealth Enduro model ebikes fit this stand??
@greglasseigne9493 Жыл бұрын
what is the max load of the stand? I have a Juiced Bike Scorpion X and it near 100 pounds.
@Zetler Жыл бұрын
What if I need to get the front wheel off the ground to service my fork or change my front tire? This is rather niched because it only lifts the rear wheel.
@ou812true5
Ай бұрын
He mentioned that.
@dad_hacks4 ай бұрын
Looks wobbly. No way that thing doesnt fall over with lateral movement
@billderas3420 Жыл бұрын
My Specialized Levo SL e-bike can accommodate a 8mm round rod through its bottom bracket. Unfortunately, the Scorpion stand comes with a 10mm round "stinger" rod.
@HummerH-mo4cs9 ай бұрын
Will it fit fat bike tire. 4 - 4.5"
@birdsnest788311 ай бұрын
Sorry to low for me. Great video!
@EMTBReview
10 ай бұрын
All good. Thank you for stopping in!
@E-bikeEnduro Жыл бұрын
is it available for Italy? can I buy with shipping in Italy? thank you
@davidhamilton82 Жыл бұрын
Just noticed that this will not work for bikes with front mudguard? Has anyone tried it. I have a Riese and Muller Charger 4. Too heavy to haul onto a usual stand. At first sight I thought this was good but looks like it will clash with my mudguard. I accept that presenter does state enduro (no mudguards).
@daning97643 ай бұрын
you need to show more, eg how compact when folded etc. The biggest problem with this stand is you have to do everything kneeling down
@EMTBReview
3 ай бұрын
This doesn't fold at all. It does have some adjustability features though. Yes, kneeling or squating is required. A small stool is golden for usability.
@ignaciosevil1944 Жыл бұрын
sir, one question... Have those Reynolds Wheels failed? The rear hub fails??
@ignaciosevil1944
Жыл бұрын
@@EMTBReview look at the reviews online and beware sir. It has like 45 people having the same problem.. :S The guys far away from reynolds are screwed seems like it.. Good to know still
@MickeyMikeMd Жыл бұрын
Hi this was uploaded in just 360p resolution FYI :)
@Lexlex80037 ай бұрын
This wont fit the smaller e-bikes. 20” wheels . It says this stand is only for 26, 27.5 and 29. I need a stand for our Ride1up protola e-bikes 🤦🏻♀️
@deanh719010 ай бұрын
Does not fold up like my work stand for RV travel but nice for stationary use at home.
@EMTBReview
10 ай бұрын
Very true!
@martinturner8110 Жыл бұрын
Where and how can I get one from please message me I have two giant trance e3pro ebikes
@adulit
Жыл бұрын
the website and the discount coupon code are shown near the end of the video.
@lostcyclery93037 ай бұрын
Anyone try this on a 20” fat tire Ebike, like a Rad Power?
@DigitalDawg Жыл бұрын
Thanks for the review, very good. Your discount code no longer works, "...Gift Certificate is either invalid or the balance has been used up!" This as of 06-12-23
@EMTBReview
Жыл бұрын
Let me check. Thank you for letting me know.
@camperp1958 ай бұрын
Take the battery out first,then cover connector with a rag,then put splash guard back on,less stress on seatpost if using a normal bike stand But on this stand,you cannot spin the front wheel to wash it,so pretty us3less
@EMTBReview
8 ай бұрын
Front wheel is not locked so just roll it halfway to clean if it’s very dirty. Battery out lifting to stand, spraying, is far from ideal
@gcrawford31 Жыл бұрын
The code longer works
@melescabi5997 Жыл бұрын
It’s not a new company they make parts and accessories for dirt bikes
@olddognewtricks1293 Жыл бұрын
Yeah that's great now take your front wheel off to change your break pads.....guess you're gunna need another stand.
@shredcoremtb Жыл бұрын
pinoy kaba paps?
@JeepingNet Жыл бұрын
I'd love to get this product but boy do they make it impossible to buy unless you are the the US. They sent me to a distributor, distributor told me they only sell to stores but gave me a few stores, called 4 stores, 1 called me back to tell me they have no idea how to get the product. I'm not going to spend more time trying to figure out how to spend my money.
@EMTBReview
Жыл бұрын
Wow. Very good share. I'll talk to them and check.
@forzauk1 Жыл бұрын
Put and allen key in the chain ring bolt and leave it there you can pedal it backwards to maintain the chain
@davej37365 күн бұрын
Won’t work for my Wife’s Specialized Vado…the full front fender is going to be an issue.
@rickdeckard981011 ай бұрын
Problem is you can only work on the rear tire not the front.
@EMTBReview
10 ай бұрын
Definitely not for front wheel maintenance. The good news is this covers 90% of the routine tasks and maintenance and it is so much more convenient than all other options out there.
@mogeking566 ай бұрын
Is that ebike stand $6 dollars
@EMTBReview
6 ай бұрын
I think more than that.
@chrisallen2005 Жыл бұрын
150 dollars is chump change when you consider what a mid to high end e-bike is selling for.
@saulcastro2990
Жыл бұрын
Indeed
@knutcup84269 күн бұрын
Kinda wished I had the $300CDN to get this. Super cool.
@S14AA10 ай бұрын
If you are on the chain side and pull the chain anti clockwise it will turn with out the wheel
@manueldeplano2546
2 ай бұрын
Not with an e-bike
@ionageman Жыл бұрын
Bipod bicycle stand . $30 . Your Welcome .
@Neo_The_One_22 күн бұрын
Almost $200 dollar stand and you can't even work on the front wheel. Hard pass.
@EMTBReview
22 күн бұрын
It does what most want to do with emtbs very very well
Пікірлер: 87
Enduro engineering ebike stand - 10% off coupon code - EEMTB10 Buy here: www.enduroeng.com/p158352-mtb-stand
@cjcruz111
5 ай бұрын
Hey! Thanks for the videos. The coupon code isn’t working, Do you have a new one?
Brilliant video. At last an enthusiast who understands the fact that e-bike’s are heavy and the awareness of trying to get one onto a traditional stand. Thanks so much.
Always appreciate your review videos! The Scorpion stand came with my 2021 Intense Tazer MX Pro e-MTB and as noted in other comments works fine with the Shimano EP8 motor. I do like the concept of the Enduro Engineering stand and seems to work well. I also use the low cost flip the bike over method too!
Super nice stand. Good idea too. I’m digging your ebike. Money is not bad. I bought a wheel chock I use as a stand, it was $80….so $150 for a actual stand for maintenance is doable for sure. Good video Sir
I have a Shimano EP8 equipped ebike and the scorpion stand works just fine with it. The Scorpion stand comes with different size sleeves to accommodate different crank holes so I use the smallest plastic sleeve and it fits perfectly
I got one, true you can’t work on the front wheel or fork but most of the time you’re working on the rear of the bike, I lube and clean my drivetrain on every ride, also it comes handy when you wash your bike. Good quality stand, not your full stand but a full stand for an ebike is going to cost you double the price. Thanks for the review Francis!
I don't even need a bike stand, but I appreciate a quality review as a bicycle enthusiast, nerd, and engineer.
Muc-off's ebike drivetrain tool works wonders! Alternatively, you can just put a hex-wrench in (although they get stuck when you try to pull them out - PITA). With the drivetrain tool, I've had no problems running the chain backwards for lubing the chain.
My dual suspension xc bike, weighs 24.5 lbs.........My Canyon e bike weighs 52 lbs. Its very noticeable. For a normal stand , the trick is to lift the e bike by the back wheel, its not too hard. It can be slid into the stand pretty easy like that. The EE stand, the bike is close to the ground, so your back on your knees working on the bike.
Just pulled the trigger on this. Arrives early next week!
Good one! Long time no see... nice to have you back here 😊
This is one crazy design. Looks super cool though!
Thanks for this francis! I just ordered this stand! Looks very easy to use.
@EMTBReview
10 ай бұрын
Hope you like it!
Quality review, pertinent And crisp. Thanks
I converted a cheap light motorcycyle stand with bigger swivel wheels to lift the ebike under the swing arm. It's very easy to use but you cannot work on front wheel unless flip bike over. I usually have the front tire off because I can't fit the bike in the small suv with tire on.
GENIUS IDEA 💡 Thanks, tried ordering but out of stock. Will try again and I’ll use your code. Thanks again 🙏
@apatriotofhopedanjohn4781
Жыл бұрын
@@EMTBReview Hey 👋 Appreciate ya, yes sir I ordered yesterday, they said have new shipment coming and will ship probably in couple of weeks. Thanks again and Blessings to ya 🙏
That looks sweet, I may need 1 or 2 👍
Belt drives and internal gearing are the future of e-bikes.
good presentation 👏 thx
Bro that last shirt is sweet! You need to go back and get the skull and bird of paradise one too!
Francis, excellent review brother! That stand looks great, but the lube bottle concept even better. Hope you are doing well. Am sure you are still hammering. Hit me up if you get out to Maui Dave M. (mtbr emp no. 1:)
I noticed both Canyon shown here and the Enduro Engineering KZread-featured Husky are factory bikes equipped with internal mid-drives. They have a relatively flat, curving bottom bracket would rest nicely on the pad with the rubber bumpers. Conversions using a BBSHD or CYC external motors would see these hang outside the BB next to and below it. Where these motor would rest on the pad are usually heatsink fins and they are irregular in shape and far from uniform. I wonder if the stand has been tested with these external mid-drives for stability.
if your ep8 uses a shimano chainring you can use a t25 torx to lube/clean the chain
since i bought my 2022 orbea rise, i am now poor so i got creative on no longer buying anything expensive so i would like to share something that is now invaluable to me when i clean and lube my emthbike. velcro. yes velcro! i tie it up on the crankarm to the crank and while it is on a bike stand that you put the rear wheel in. simple and very inexpensive i should say. however... as always, thank you for all the video tips and new gadgetries you always present. i truly appreciate it and keep it coming. great work!
@zlatkoa3198
Жыл бұрын
Hahahaha. I too ran out of money after purchasing my Levo last year and am also an avid promoter of the Velcro system. 😂😂. I do like this stand though so might start saving.
@dongkapuyawn5107
Жыл бұрын
do you have a photo of this setup? i too have a levo sl lol
Love the vid and this stand. Been waiting for the right time to pick one up, but looks like it went up to $175 in 3 mo. Maybe your promotion was so good that demand went way up!
@EMTBReview
Жыл бұрын
Demand went up for sure. And they changed production lines for better consistency and volume.
Most bike work-stands are far from perfect for e-MTBs. Finding a place to place the mounting jaws can be tricky. The head on work-stands tends to slip if you try to swivel and lock the bike front up. Even though I have a new full sized work-stand I'm tempted to make a purchase. This bike stand is full of functionality and extra portable. I like the idea for using it to park my bike at home. This tool is not cheep, but appears to have great value.
Hi, have you tried on other ebike ? Like the heckler? Thanks
Very informative, Thank U.
@EMTBReview
Жыл бұрын
You are most welcome.
Nice video. Thanks. Btw: 1:50 min ...I think connecting the crank arm (with a zip tie) to the chainring should fix that problem.
in a normal stand, you release the dropper and let the bike hang from the saddle. If you need it more secure, you can also make a small rail to lock in the front wheel but for most jobs it isn't necessary.
Good video Frances, thank you
That looks a lot slicker than my 2 ropes from the ceiling with blakes hitches.
Looks like and excellent value. One question , will the Surron/Talaria ,Stealth Enduro model ebikes fit this stand??
what is the max load of the stand? I have a Juiced Bike Scorpion X and it near 100 pounds.
What if I need to get the front wheel off the ground to service my fork or change my front tire? This is rather niched because it only lifts the rear wheel.
@ou812true5
Ай бұрын
He mentioned that.
Looks wobbly. No way that thing doesnt fall over with lateral movement
My Specialized Levo SL e-bike can accommodate a 8mm round rod through its bottom bracket. Unfortunately, the Scorpion stand comes with a 10mm round "stinger" rod.
Will it fit fat bike tire. 4 - 4.5"
Sorry to low for me. Great video!
@EMTBReview
10 ай бұрын
All good. Thank you for stopping in!
is it available for Italy? can I buy with shipping in Italy? thank you
Just noticed that this will not work for bikes with front mudguard? Has anyone tried it. I have a Riese and Muller Charger 4. Too heavy to haul onto a usual stand. At first sight I thought this was good but looks like it will clash with my mudguard. I accept that presenter does state enduro (no mudguards).
you need to show more, eg how compact when folded etc. The biggest problem with this stand is you have to do everything kneeling down
@EMTBReview
3 ай бұрын
This doesn't fold at all. It does have some adjustability features though. Yes, kneeling or squating is required. A small stool is golden for usability.
sir, one question... Have those Reynolds Wheels failed? The rear hub fails??
@ignaciosevil1944
Жыл бұрын
@@EMTBReview look at the reviews online and beware sir. It has like 45 people having the same problem.. :S The guys far away from reynolds are screwed seems like it.. Good to know still
Hi this was uploaded in just 360p resolution FYI :)
This wont fit the smaller e-bikes. 20” wheels . It says this stand is only for 26, 27.5 and 29. I need a stand for our Ride1up protola e-bikes 🤦🏻♀️
Does not fold up like my work stand for RV travel but nice for stationary use at home.
@EMTBReview
10 ай бұрын
Very true!
Where and how can I get one from please message me I have two giant trance e3pro ebikes
@adulit
Жыл бұрын
the website and the discount coupon code are shown near the end of the video.
Anyone try this on a 20” fat tire Ebike, like a Rad Power?
Thanks for the review, very good. Your discount code no longer works, "...Gift Certificate is either invalid or the balance has been used up!" This as of 06-12-23
@EMTBReview
Жыл бұрын
Let me check. Thank you for letting me know.
Take the battery out first,then cover connector with a rag,then put splash guard back on,less stress on seatpost if using a normal bike stand But on this stand,you cannot spin the front wheel to wash it,so pretty us3less
@EMTBReview
8 ай бұрын
Front wheel is not locked so just roll it halfway to clean if it’s very dirty. Battery out lifting to stand, spraying, is far from ideal
The code longer works
It’s not a new company they make parts and accessories for dirt bikes
Yeah that's great now take your front wheel off to change your break pads.....guess you're gunna need another stand.
pinoy kaba paps?
I'd love to get this product but boy do they make it impossible to buy unless you are the the US. They sent me to a distributor, distributor told me they only sell to stores but gave me a few stores, called 4 stores, 1 called me back to tell me they have no idea how to get the product. I'm not going to spend more time trying to figure out how to spend my money.
@EMTBReview
Жыл бұрын
Wow. Very good share. I'll talk to them and check.
Put and allen key in the chain ring bolt and leave it there you can pedal it backwards to maintain the chain
Won’t work for my Wife’s Specialized Vado…the full front fender is going to be an issue.
Problem is you can only work on the rear tire not the front.
@EMTBReview
10 ай бұрын
Definitely not for front wheel maintenance. The good news is this covers 90% of the routine tasks and maintenance and it is so much more convenient than all other options out there.
Is that ebike stand $6 dollars
@EMTBReview
6 ай бұрын
I think more than that.
150 dollars is chump change when you consider what a mid to high end e-bike is selling for.
@saulcastro2990
Жыл бұрын
Indeed
Kinda wished I had the $300CDN to get this. Super cool.
If you are on the chain side and pull the chain anti clockwise it will turn with out the wheel
@manueldeplano2546
2 ай бұрын
Not with an e-bike
Bipod bicycle stand . $30 . Your Welcome .
Almost $200 dollar stand and you can't even work on the front wheel. Hard pass.
@EMTBReview
22 күн бұрын
It does what most want to do with emtbs very very well
Just get to the point