EMP Proof Solar Components: Trash Can Faraday Cage
Ғылым және технология
In this video we show you how to make a nested Faraday cage with galvanized trash cans. A lot of our customers our concerned with the possibility that and EMP could damage there electronics, storing a backup of anything in a Faraday cage is just good insurance, especially if you are offgrid and dependent on your system!
Пікірлер: 59
I'm a retired engineer from a military contractor and I performed EMP testing on our components to verify hardness. The simplist thing you can do is just remove batteries and have things unpowered they will survive a tremendous EMP pulse as long as there's no power applied. Secondarily the foil bags and cans like shown are good idea but the biggest thing is just have things unpowered and then you will have much higher survivability.
@brucehansen7949
4 жыл бұрын
Would this work for a vehicle? Just disconnect the battery cables?
@brendahernandeznazario6740
4 жыл бұрын
I would also love to know if it works for vehicles? Do we just unplug the battery? Please advice.
@dobson777a
4 жыл бұрын
@@brucehansen7949 yes but modern vehicles already are pretty well protected. All the cabling is shielded for EMI purposes.
@dobson777a
4 жыл бұрын
@@brendahernandeznazario6740 yes but modern vehicles already are pretty well protected. All the cabling is shielded for EMI purposes.
@CinderellaCoach
3 жыл бұрын
@@dobson777a what year car do you consider newer?
Metal tape around the can lid would zero out any leakage of RF into the cage.
@GainSolarPower
3 жыл бұрын
It’s true.
Good to be prepared,great video.I have a simple idea.I will test all my panals after order arrives.Than I will put them back in there boxes, rapped up in tin fwo times.Same with the generator,and small fridge.I can put the things I need in that fridge,like other electronic components ,or what ever. it's the same kind of protection,and I save money for more preps.What do you think? Here we are in 2022,and the sun is popping off!
How are you PO event? This seems quite tough without a good size fariday cage. Guess you could wrap in a copper shielding screen and ground.
Do I have to put cardboard in the can if I have them in faraday bags in the aluminum can?
Did you use aluminum tape on the seams??
Will this prevent my cell phone frombgetting signal if placed inside the can?🤔
Hey John, was this a live stream or recorded and then uploaded? Audio was very good, occasional video freeze but none on the audio side...quality good-to-acceptable, much better than the Trade music video I commented on yesterday. I know you are trying to improve your product and thought you might like some positive feedback? Doug
@GainSolarPower
6 жыл бұрын
Thanks for all the feedback Doug, I'm listening! Between working full time running my own solar business and being a father of 3 little ones time is scarce...This video was shot in the field on my iphone. Trying to get better at youtube, just figured out thumbnails. Engineer775 is my good buddy and he has long encouraged me to do more youtube.... bear with me.. The trade music video was an attempt at going live from my home internet connection, I figured out that it is too slow, from now on the live videos are from my verizon data and the quality is acceptable based on the feedback I get
@funkinflugen
6 жыл бұрын
No problem John...I understand your plate is full with family (priority) and being a small business owner. YT production is a labor intensive to do correctly, don't know Jack-all about it either. I'll help with my continued support.
@GainSolarPower
6 жыл бұрын
Thank you very much!
Why can't you get the flex seal paint and paint the galvanized cans inside, which would be a rubber barrier that would seal the seams and any holes that might be on the handles etc. Which would also be a barrier.
Honda Generator in the can??
Why one can inside the other when your going to have only one lid ?
How will you protect the solar panels?
@GainSolarPower
3 жыл бұрын
We’ve since converted that entire system to a solark 12k emp hardened setup but previously the panels had no protection
How goes it Johnny Greetings from the northern coast of California. From jonny
@GainSolarPower
2 жыл бұрын
Greetings friend
First! Good morning Johnny :)
Lid gasket?
I wondering if solar panels are emp proof🤔
@anthonygonzales1027
Жыл бұрын
Solar panels can't be effected but only the think that powers the battery can
@WaschyNumber1
Жыл бұрын
@@anthonygonzales1027 thanks for the info, that's 1 think less to worry about. 🤔
Why not just line the can with a rubber horse stall mat instead of the double can?
@GainSolarPower
6 жыл бұрын
kamurray67 something to do with the “nested” steel cans. I’m mostly just following orders in the video. I can’t tell you why but my buddy engineer775 ‘s channel has a wealth of information on EMP
I used foil
@GainSolarPower
6 жыл бұрын
Im just following orders
@rockingship1238
6 жыл бұрын
It’s all I had
@GainSolarPower
6 жыл бұрын
you dont want something conductive touching whatever you want to shield. so if you wrapped it in wax paper, then foil, then wax paper then foil. you get the idea....
@rockingship1238
6 жыл бұрын
How about a 1mm hard plastic and slip of paper?
@rockingship1238
6 жыл бұрын
I still would need wax between foil I guess
Get EMP Shield installed buddy.
Will cast iron pot work as faraday box/cage?
if you didn't use any kind of seal on the lid - its not going to work bubba - energy will leak in through the top of the can dude
@lukuscarter3563
3 жыл бұрын
Throw a phone into that can with the lid on it and try to call it. I bet you it won’t ring.
@erikabaker1439
3 жыл бұрын
@@lukuscarter3563 phones operate on much narrower frequency ranges than an emp would. Any faraday cage with 5%+/- gap or room for seepage is ineffective.
@lukuscarter3563
3 жыл бұрын
@@erikabaker1439 still, a metal Trashcan like that, lined with rubber, as well as a solid lid on it, should protect electronics from emp’s. Right?
That solar world warranty is trash now.