Thank you for taking the time to make these videos. I really enjoy learning from your experience!

@ktoutdoor

5 ай бұрын

Thanks for letting me know.. stay tuned more to come.

Have not had this problem YET, but glad I came across this great video. Thanks

Thank you so much this was very helpful as I had my slides fail

@ktoutdoor

2 жыл бұрын

Did you find the problem? Is it fixed now?

Thanks for the video

@ktoutdoor

2 жыл бұрын

Thanks for watching

Another great video that I hope I never need! :)

@ktoutdoor

3 жыл бұрын

Me neither

Thank you Kevin!! Now I am confident I can do that if needed.

@lonesomedovefree1429

3 жыл бұрын

I googled the manual number you have but no 325 series shows up. Any hints?

@ktoutdoor

3 жыл бұрын

Try here www.hwhcorp.com/ml54800_srvc.html and www.hwhcorp.com/ml31588.pdf

@lonesomedovefree1429

3 жыл бұрын

That is exactly what I needed. Thanks Also, I noticed your notes about the bedroom slide creeping in. Did that take a solenoid replacement to correct? I am experiencing that with my kitchen slide.

@ktoutdoor

3 жыл бұрын

@@lonesomedovefree1429 Yes a solenoid should fix you right up I got mine here www.rvleveling.com/ He ships quick.

I like the way your hoses and cables run outside the frame. My HR has them inside the frame and are not very accessible.

Good tips as usual. Made me think a second socket and ratchet would be a good investment. Afterall why shouldn’t the wifey miss out on the fun

@ktoutdoor

Жыл бұрын

I concur share the love

I hope wherever I am when a slide won't come in, I have internet access so that I can pull up your video. No way I'll remember this. Hopefully one never has to use this method to retract a slide to avoid a hurricane or some other urgent matter.

@ktoutdoor

3 жыл бұрын

You could use your phone to record the video then save on to your phone.

Good job as usual, mine is a little different but very good to know how they operate in your driveway than on a campsite when you have to make them come in.

Great video, with lots of good information. Question, when running the threaded nut back into the tube, is there some sort of keeper to prevent the nut from un-threading off of the threaded rod?

@ktoutdoor

3 жыл бұрын

There must be some kind of clip on the end for i felt resistance at the end.

@mw4674

3 жыл бұрын

@@ktoutdoor fyi, I have the exact system you are showing. We watched your video at the campsite & you helped us proceed to the emergency system. Thank you for the video. Problem we had was our threaded bolts just turned endlessly. Apparently nothing was attached to the other end? And calling HWH was useless. They had no regard to the customer in the field with an issue. Once again, thanks for leading us in the right direction. I just wished the backup retracting process worked as designed.

@ktoutdoor

3 жыл бұрын

@@mw4674 give me a call if you like i stay up till 3 am The nut is plastic with acme threads i believe my cell 606-875-0125 Kevin

I have a 2005 Winnebago Adventurer 37B. It has 2 bedroom slides and a living room slide on the drivers side. I extended the living room slide and it would not retract. I hear the motor running but it will not move. My bedroom slides are very slow now but they will work. I cannot get the pressure to release from the retract and extend solenoid valves for the living room (I can't hear anything that is). I did the 4 1/2 turns. The cranking tension was so great I could see my mounting plates flexing. Is one of my hydraulic cylinders locked? Fortunately I am in my driveway.

@ktoutdoor

3 жыл бұрын

Give me a call 606-875-0125 Kevin

great video, I have 2003 Winnebago adventurer 35U, I have a winch opposite of my slide out for emergency retraction, but not sure exactly what to do,and which solenoids? Thanks

@ktoutdoor

Жыл бұрын

You need to download the manual for your HWH model it will tell you what solenoids you need to bypass

Kevin were i can get one of those manual please let me know thanks you the best

@ktoutdoor

Жыл бұрын

Text me your email address I will send you what I got my cell is 606-875-0125 Kevin

Hi Kevin. Where can I get the manual, and what product do you use for lube the treads?

@ktoutdoor

Жыл бұрын

server51.hwhcorp.com/?page_id=127717 Dry spray lube on the threads server51.hwhcorp.com/?page_id=115608

Hey Kevin is it possible to manually open a slide-out with the HWH system?

@ktoutdoor

2 жыл бұрын

Sort of.. give me a call 606-875-0125 Kevin

Great video. I've got a question....my slide comes out so that the glide shoe and the rollers hit the support...and it keeps bending the height adjustment bolts. Any idea on how to adjust that??? Does that make sense?

@ktoutdoor

3 жыл бұрын

Yes been there none that..lol question do you have stripes to go by? when the room in closed do the stripes line up ? or does the slide room seam lower than the RV wall

@bicwig

3 жыл бұрын

@@ktoutdoor yes and the rear side is low, but it seems that the stage that has the support is not starting to slide out quick enough, allowing the shoe and rollers to hit. I think the problem is in and out wise, and not height. Thanks for helping out!!!!

@ktoutdoor

3 жыл бұрын

Text me tomorrow i can help you figure it out. My cell 606-875-0125 Kevin

Kevin, after the slide has been retracted and it's time to back the cranking bolts off, how far will they back off? Will the nuts and long screw shaft hit a stop or will they back off and come apart?

@ktoutdoor

2 жыл бұрын

Going by memory I think there is a small roll pin at the end of the threaded rod so just crank it out by hand till you feel resistance and you should be good

@bobgillooly9066

2 жыл бұрын

@@ktoutdoor Thank you Kevin

Kevin, when one opens the valve to allow the bypass to happen, should it be done with the engine running or does it even matter?

@ktoutdoor

Жыл бұрын

No need to run engine. I only run engine when I operate the slides or the jacks so the hydraulic motor has plenty of amps.

@frankshiffer588

Жыл бұрын

@@ktoutdoor Kevin, I guess I should have asked, should I have the key on so the HwH motor is on? I loosened the one I thought it was but the jack didn't move. . Also, if I don't turn the key on, then just opening the valve and enough pressure and the Jack should retract?

@ktoutdoor

Жыл бұрын

@@frankshiffer588 Yes key on then push the store button that should open all 4 solenoids allowing the jacks to retract

Does your bedroom slide screw-in the same way? I did this procedure on my 2004 Winnebago Brave 30W living room. The bedroom is smaller, only has one ram, and I don't see a threaded-rod device to screw that one in with.

@ktoutdoor

3 жыл бұрын

No .. I believe you have to push it by hand .. after you release the correct solenoid valves.

@MarkECoburn

3 жыл бұрын

@@ktoutdoor Thanks for the reply. That is what I had to do. On our first voyage, at more than 700 miles from home, my living room slide was trying to go out sideways (just one ram). In troubleshooting I found a puddle of fluid under the ram that was moving. The bedroom was already out. I didn't know about these screws on the big slide. I made some frames out of lumber to place on the top of the retracted slide and jamb between the inside of the main bulkhead and the slide's flange. This was to keep my slides from coming out. I'm home now and trying to find and repair my leak, but my rams are not as exposed as yours. The rams are behind some sheet metal and are inside of the rails. The hydraulic lines for the ram go through a hole in the metal box to het to the ram. When I try to operate the ram, fluid leaks out from the seams in the box where the ram is on the other side. Strange thing, even when I try to operate the bedroom, it doesn't move and I have a puddle up by the front room.

@ktoutdoor

3 жыл бұрын

@@MarkECoburn Give me a call on my cell 606-875-0125 Kevin

are HWH slides controlled by the same solenoids as the levelers?

@ktoutdoor

3 жыл бұрын

No each jack has 1 solenoid Each slide has 2 solenoids

How is your TV mounted to the cabinet ?

@ktoutdoor

3 жыл бұрын

See this video kzread.info/dash/bejne/dp-eq5uKcsnVf6Q.html

@mruofacat

3 жыл бұрын

@@ktoutdoor Thanks for that. Just removed my Sony Trinitron in my 2004 38R. Probably going to replace with a 40" or smaller.

@ktoutdoor

3 жыл бұрын

@@mruofacat We went with a 42" Vizio its been working great.