Elvis Rebuilds A Modded Engine On This TVR Griffith | Wheeler Dealers

Автокөліктер мен көлік құралдары

Unsure whether or not the engine in their TVR Griffith is a 4.0 or a 4.3, Elvis gets to work measuring the size of the engine and rebuilding it!
From Season 17 Episode 2.
🇬🇧 Catch full episodes of Wheeler Dealers on discovery+: bit.ly/3L6XS4p
For more car clips from Wheeler Dealers just head to: / wheelerdealerstv
Subscribe to Wheeler Dealers TV: kzread.info_c...

Пікірлер: 83

  • @user-qn6yt3zx3w
    @user-qn6yt3zx3w Жыл бұрын

    Omg, Steve drove me round Goodwood in that Griffith, I’ve never felt so sick in my life! Earth shattering pace back then.

  • @vladislavdimitrov4646
    @vladislavdimitrov4646 Жыл бұрын

    These are the taillights from Opel Vectra/Vauxhall Cavalier but up side down

  • @ro63rto

    @ro63rto

    Жыл бұрын

    Mk3 but yes

  • @vladislavdimitrov4646

    @vladislavdimitrov4646

    Жыл бұрын

    @@ro63rto Yes Mk3 Cavalier/Opel Vectra A

  • @automotiveaffairsshorts

    @automotiveaffairsshorts

    Жыл бұрын

    Wish TVR had invested in nicer taillights.

  • @ringo196

    @ringo196

    Жыл бұрын

    Gsi cavalier

  • @ringo196

    @ringo196

    Жыл бұрын

    I had a formula red 500 which was only bettered in the bonkers department by my 3.9 Westfield

  • @Ridcully72
    @Ridcully72 Жыл бұрын

    The joys of dealing with cars from small volume British manufacturers, never quite know what you are going to find. I remember them sending a Cerbera along for Clarkson's Unleashed On cars DVD and they had stuck a Tuscan challenge V8 in it so it would do well in the drag race, it did rather too well and destroyed the entire line up of supercars.

  • @joemay2640
    @joemay2640 Жыл бұрын

    Love watching Elvis work his magic, the man is a genius.

  • @ringo196

    @ringo196

    Жыл бұрын

    We need more of elvis not brewer

  • @MissingPatel
    @MissingPatel Жыл бұрын

    I believe we need a tad longer videos! Loved it!

  • @marcusdamberger

    @marcusdamberger

    Жыл бұрын

    I think that is the point, they would like you to watch on MotorTrend+, app, and channel etc.. this is just a taste as it were.

  • @rk22cc
    @rk22cc Жыл бұрын

    Love TRV's Evis was the best mechanic!

  • @colinspencer2205
    @colinspencer2205 Жыл бұрын

    Should magnaflux the block between the mains and the camshaft for a longitudinal crack. Harsh treatment using the clutch with a manual box can crack the block dumping oil pressure when hot.

  • @sergeantmasson3669
    @sergeantmasson3669 Жыл бұрын

    Our neighbor, in CT, had a Ford 289 Griffith. Very fast little car.

  • @genericcarchannel
    @genericcarchannel Жыл бұрын

    Can someone correct me if im wrong but i was sure cam lobe height affected how far the valves opened and its the overall shape of the lobe that affects the duration

  • @hoonaticbloggs5402

    @hoonaticbloggs5402

    Жыл бұрын

    No💩, shirlock

  • @nickybyrne4961
    @nickybyrne4961 Жыл бұрын

    Top end rebuild. Hope you broke it in before thrashing it.

  • @chrispark9343
    @chrispark93432 ай бұрын

    I had a 500HC for 17 years. I loved it, it was manically quick. But didn't quite as sound as good as the non Cat earlier models

  • @top6ear
    @top6ear Жыл бұрын

    My friend has one. Was faster than the Ferrari at the time.

  • @robertlewis7237
    @robertlewis7237 Жыл бұрын

    THANK YOU

  • @josephyentz870
    @josephyentz870 Жыл бұрын

    Magic number on the cams is 50k... Yikes 😬

  • @puciohenzap891

    @puciohenzap891

    Жыл бұрын

    Yep, big "OOF" in terms of reliability...probably still cheaper than a new Ferrari/Maserati clutch each 50kkm.

  • @Mephistopholies
    @Mephistopholies Жыл бұрын

    IM AN AMERICAN! There is a couple great looking TVR's

  • @robertfish4052
    @robertfish4052 Жыл бұрын

    Imagine, the company give you a car and then drive it sideways, get a bonus. Clarksonesque.

  • @alexpeat5896
    @alexpeat5896 Жыл бұрын

    There's a much easier way of finding out the cc, fill the cylinder with a liquid, suck it out with a big syringe & measure, obviously make sure the valves are closed & take into consideration the size of the combustion chamber.

  • @smurfsmurf2295
    @smurfsmurf22955 ай бұрын

    Elvis is da man

  • @juancruzceballos7271
    @juancruzceballos7271 Жыл бұрын

    Guys, work on a Renault Kangoo I, please.

  • @user-yr6se8er3g
    @user-yr6se8er3g Жыл бұрын

    Please rebuild VW GTI MK5 🙏 I like this video.

  • @numberpirate
    @numberpirate Жыл бұрын

    Quacks about cam wearing out, proceeds to install flat tappet lifters............ I have a feeling that this is the junko buick V8 you right side of the ponders grabbed from us back in the 50s. Pushrods are archaic. What would be cool is the Lotus headed DOHC 32V 5.7L out of the 90-94 Corvettes. 16 fuel injectors, 32V it can breath and scream up to 7,500rpm+

  • @Timemachine74
    @Timemachine74 Жыл бұрын

    He’s had more mechanics than rod Stewart as had wives

  • @freddysquirenaranjo4859

    @freddysquirenaranjo4859

    Жыл бұрын

    Henry VIII more like lol 😂 😂 either way

  • @JxH
    @JxH Жыл бұрын

    A "strong engine", and it was "fastidiously maintained", and then it blew up. 🙂

  • @user-oc7ei7qn5n
    @user-oc7ei7qn5n5 ай бұрын

    If you think the 430 Griff is fast, try the 500 it’s the mcdaddy! I loved owning it + I survived ! :)

  • @erapz1970
    @erapz19702 ай бұрын

    Love wheeler dealers

  • @ro63rto
    @ro63rto Жыл бұрын

    9:07 🤔 what sun?

  • @cameronwallis7024

    @cameronwallis7024

    Жыл бұрын

    Not a speck of blue sky to be seen, only clouds.

  • @Shareefhamida
    @Shareefhamida Жыл бұрын

    Nice

  • @paulsnify
    @paulsnify Жыл бұрын

    One of my mates Andy Butterworth had one of these and it was awesome but not for the passenger😃😃🤣🤣

  • @tassioribeiro2102
    @tassioribeiro21026 ай бұрын

    Queria muito esse episódio dublado 😕

  • @vincentwhiteman6433
    @vincentwhiteman6433 Жыл бұрын

    Hi. Am I the only person that has noticed that this tvr has a griffith 500 body, so why is it running the 4.0 or 4.3 litre motor when it should have the 5 litre motor as standard, and what's all this crap about them knocking the camshaft out at 50k, I have several rover v8 over many years including the last 20 with my own 1994 griffith 500 and have never had this problem, if these motors have regular oil changes with a good quality oil this shouldn't happen.

  • @geepersoilyrag1884

    @geepersoilyrag1884

    Жыл бұрын

    Came to say this!!! hahaha. Ive worked on hundreds of rover v8s, from a load of different cars. Never changed just a camshaft because it was worn out, something else usually failed before that because of the incorrect servicing!

  • @vincentwhiteman6433

    @vincentwhiteman6433

    Жыл бұрын

    @@geepersoilyrag1884 yep I have to agree with that. I found that if the oil doesn't get changed regularly the sludge would build up in the valley and starve the cam lobes nearest the back of the engine.

  • @Bobblenob

    @Bobblenob

    Жыл бұрын

    Vince, you answered your own question with the oul

  • @colingregson8653

    @colingregson8653

    7 ай бұрын

    Couldn't agree more

  • @jstdrv
    @jstdrv Жыл бұрын

    The pocketed pistons give it away. 400s didnt have that.

  • @PureWhiteBlue
    @PureWhiteBlue Жыл бұрын

    Has MOT but has been sorn, fair enough it is winter I guess.

  • @michaelduncan2759
    @michaelduncan2759 Жыл бұрын

    Is not the Rover V8 made by GM in the states?

  • @Baribrotzer

    @Baribrotzer

    Жыл бұрын

    It was designed by GM for small Buicks, and first built in the States, but eventually discontinued. Rover bought the tooling, brought it over to the UK, built it there, and updated the design several times. The original, for example, had a displacement of 3.5 L (215 c.i.), and a carburetor, not fuel injection.

  • @numberpirate

    @numberpirate

    Жыл бұрын

    Same V8 in the LR Discovery and the old skool Range Rover. For an american designed V8 it is pretty solid and Rover updated it intelligently with the exception of the flat tappet cams. These guys should have put roller tappets in for another 25hp, 35-40ftlbs

  • @Baribrotzer

    @Baribrotzer

    Жыл бұрын

    @@numberpirate "For an American-designed V8 it is pretty solid....." American-designed V8s are pretty good in general, or at least the best of them are. The Ford flathead, small-block, big-block, modular, and Coyote; the Chevy small-block, big-block, LS, and the new 5.5 LT6 in the Corvette, the MoPar old Hemi, small-block, big-block, and newer Hemi - all strong and reliable. They are/were in production for years, and are/were the choice of many smaller Euro automakers and a few bigger ones for trouble-free power. They may be pickup-truck motors, but they're GOOD pickup-truck motors.

  • @ringo196

    @ringo196

    Жыл бұрын

    No its not it was a 215ci engine destined for the buick skylark but it was considered to small and a rover chap saw it being mairinised and bought it Inc the all the rights then we made it all alloy in the mid 60s. 215ci stock 10.5.1 compression ratio to 383ci in drag form its powered everything GM even tried to buy it back ,probably the best engine along with the 350 they ever came up with and that's how the fat lady sang

  • @ringo196

    @ringo196

    Жыл бұрын

    Rover built a 3500s P6 with Lucas mechanical fuel injection as a its still survived

  • @michaelhathcock7941
    @michaelhathcock7941 Жыл бұрын

    Changing cams every 50k....

  • @pitts3219
    @pitts3219 Жыл бұрын

    I live Elvis he’s leaps and bound’s above the Aussie

  • @rk22cc

    @rk22cc

    Жыл бұрын

    agree

  • @TheSimonhammond

    @TheSimonhammond

    Жыл бұрын

    Which one is the Aussie? All the mechanics in WD are British.

  • @a.bloke2.0alwayslearning.23
    @a.bloke2.0alwayslearning.23 Жыл бұрын

    So how about it ? Are you Guys open to New Technology ? .

  • @Al-of3zp
    @Al-of3zp Жыл бұрын

    Yeah I hate having to change my cams every 50k 🥴

  • @vincentwhiteman6433

    @vincentwhiteman6433

    Жыл бұрын

    Well change your oil then.

  • @numberpirate

    @numberpirate

    Жыл бұрын

    Cam, pushrod engines have one cam, very archaic.......

  • @vincentwhiteman6433

    @vincentwhiteman6433

    Жыл бұрын

    @@numberpirate yes, but it works.

  • @colingregson8653

    @colingregson8653

    7 ай бұрын

    Never done it on mine yet at 100K. Bollock statement probanly originating from pub gossip like most statements about TVR's. Just make sure they are lubed . You don't get people saying nice car mate in a lump of German metal.😆😆

  • @michaelrawson6261
    @michaelrawson6261 Жыл бұрын

    I bloody HATE TVRs!!! But I did enjoy Mike calling it a "hairy-chested BRIT!!!"

  • @ronnieboucherthecrystalcraftsm
    @ronnieboucherthecrystalcraftsm8 ай бұрын

    TURBO CHARGE IT !

  • @edwilko8819
    @edwilko8819 Жыл бұрын

    so you've taken an engibe apart that was healthy for no reason at least it will have fresh head gaskets

  • @guillaumedhennin4830
    @guillaumedhennin4830 Жыл бұрын

    Elle ressemble à une viper

  • @garsimmulholland4984
    @garsimmulholland4984 Жыл бұрын

    Shouldn’t buy another....really shouldn’t....too late!

  • @dym0223
    @dym0223 Жыл бұрын

    👏🏻👏🏻👏🏻👏🏻🇧🇷🇧🇷🇧🇷🇧🇷

  • @Muhammad-rj1sg
    @Muhammad-rj1sg Жыл бұрын

    This program was not interesting at all without the host Edd China, no offense.

  • @geriatricmotorcars9516

    @geriatricmotorcars9516

    Жыл бұрын

    Stop watching them

  • @stevedriver1476
    @stevedriver1476 Жыл бұрын

    the Rover V8,s are hopeless. put an alloy LS3 in it. a car that size needs 450hp at least and 480+ ft lbs torque at least. A stock chev Ls3 will do the job.

  • @markwalton8644

    @markwalton8644

    Жыл бұрын

    I'm not saying an LS3 wouldn't be nice but 250-300 bhp with bags of Torque in a 1000kg car is pretty lively. I remember Performance car put one of these up against a Viper and it kicked its arse. The Rover V8 also has more character to an LS.

  • @geepersoilyrag1884

    @geepersoilyrag1884

    Жыл бұрын

    Never driven one, have you?

  • @colingregson8653

    @colingregson8653

    7 ай бұрын

    obvously never driven one, Mione has plenty enough poke and I want to live to retirement. It did near bite my head off when I pushed it on a damp surface. Never again !!.

Келесі