The most comprehensive wheelset review ever! Great job!

The man that brought me to waxing my chains, now bringing me to order a ali-wheelset. Had my doubts, but after your in-depth review, no questions left. Thank you, good man!

Brilliant review! Thanks for all the info you continuously provide!

I’ve been using these for a bit as well. I’ve noticed a marked increase in acceleration and climbing. Now my climb performance has upgraded from terrible to less terrible. Great video!

@JFomo

2 жыл бұрын

Nice, ill take less terrible of terrible any day. My climbing is very terrible.

@1sigmabikes

2 жыл бұрын

@@JFomo all kidding aside though. When I first upgraded from alloy to carbon, it felt like a quantum leap. The Drives make my old carbon wheels feel like alloy wheels.

@maddyfoster8191

2 жыл бұрын

Please find a different page this man is an animal abuser and brutally murdered a dog in Victor harbor

This is one of the best reviews I've ever watched! Brilliantly explained and presented, just wish I had the money to buy myself a pair of these hoops now 😂

@christinei.250

2 жыл бұрын

yo same i got the v40 rim brake about to see if its worth it

@user-nu5fx6en9h

Жыл бұрын

Not worth it better buy other brand, I broke my after doing 400km

This is not a review. This is an autopsy. Awesome job mate! 👍

Good call on the TLR to tube tyre weight difference. I've never cared to check. Probably would be lighter with a clincher + latex tube than TLR + 40g of sealant. Just lose the puncture protection. Great review, as always.

I’m surprised no one has mentioned it yet but those strange looking tire levers look exactly like the ones that come with Campagnolo carbon wheels!

Great review learnt more in a few minutes than I have in awhile. Thanks for info and your knowledge

Note about carbon spokes. I was @ 225lbs when I started riding my winspace wheels. 1st spoke to break was rear wheel at the threads. rim went barely out of true and I made it home. The next time I broke spokes because my derailler committed suicide and dove into the spokes accelerating out of a corner. Took 3 out but the wheel didn't fail. It has been repaired and no problems since. I think the tensions are so high if you lose one you good chance of making it home. But it is a negative that you cant make an adjustment on the road in a jam with a spoke tool

hello OZ Cycle excellent review on the wheels. Well done. Shall consider purchasing a pair.

I use an Aldi track pump too, but the gauge is one bar out. I advise putting a label on the pump as a reminder...

Great video as usual 👏🏻

Excellent review! Subscribed!

Given the vagaries of resin/finish coat, I think I'd measure lateral deviation on the inside mounting face rather than than the exterior of the rim like you would do with a metal rim - probably a more accurate view of lateral true.

I was struggling to true this wheel but was grateful when you explained that truing had to be done from the spoke hole with a 5.5mm socket. Can you give me some tips on how to radially true an asymmetrical 14 spoke/7 spoke setup such as these Elite wheels? Thanks so much for this review and any help you can provide!

Thanks for the review.

Very informative, Thankyou !

Brilliant review and thanks for the heads up on carbon spoke I will avoid them since I do everyday commuting and need something very reliable

Hi Oz cycle. I purchased a set of Elite rims, they initially came as thru axle and after a bit of back and forward they sent out qr adaptors, unfortunately the diameter of the qr adaptors seem a little to largeto fit my frame ! So having a great deal of pain trying to get this sorted ! Starting to think I should of just spent locally.

FWIW re swapping wheels and disc rotor alignment issue - invest in some disc rotor shims, usually each shim is 0.2mm, once setup this eliminate the need to adjust the caliper with each wheel swap🙂

@stevenleffanue

2 жыл бұрын

Yes. You would think hub manufacturers would stick to a standard tho, hey?

@keithreed5009

2 жыл бұрын

They do stick to a standard but the tolerance needs to be reduced

Freehub sounds identical to Winspace's Hypers. Nice review OZ!

@stevenleffanue

2 жыл бұрын

Yes , there are only a handful of hub manufacturers in China....different hub shapes with same freehub internals.

Really thorough. Well done mate

@stevenleffanue

2 жыл бұрын

Thanx Alex. I like your upfront reviews and tech work too. Cheers from Australia

@PeakTorque

2 жыл бұрын

@@stevenleffanue I've not had the same experience as you regarding the spoke tensions. On my front wheel they are far too low and inconsistent! Causes all sorts of problems with the disc brakes.

@stevenleffanue

2 жыл бұрын

You may have wheels from the first batch. I had a front wheel bearing problem and they said it was a known issue and has been fixed. They sent replacement wheel and it was fine. Let them know and they should replace it for you.

Been using the Rubino Pro for five years, and I really like them. Fairly puncture resistant, not as good as some Continental, but they are some lighter.

@glennoc8585

2 жыл бұрын

I used them once never again just awful

Fantastic review which influenced me to buy a RB set. I rode them for 1/2 season upgrading from a pair of DA C24. They climb as well or even better then the DA. Definitely faster on the flats and not harsh at all. The wide rims maxed out the clearance of my DA900 calipers. I have barely 1mm on each side. Thinner pads would help. Down side, very Loud free hub. Some people love it but it's not my cup of tea.

Красивые колёса, я 4 года назад заказывал с аллиэкспресс себе обода за 350 долларов пару, они имели такой же бархатный вид, люди правда сворачивали головы что бы посмотреть, наклейка так же была безупречна , её не возможно было почувствовать.внутри колеса были сделаны так гладко, что я не нашел ни одного сложенного или воздушного места в карбоне, что привело меня в восторг, потому что колёса эта главное, втулки у меня были просто заткни уши, представь 3 собачки у которого по три зубчика и они были в разы меньше а шум у них был что на спусках на 60-80 км скорости, народ на 300 метров меня слышал, эта раздражало. Я отъехал на этих колесах 60 тыс километров и продал их они были великолепны, потому что я их сам собирал.

@stevenleffanue

2 жыл бұрын

Good to hear super cheap wheels can perform good sometimes too , although it's still a gamble at those prices

Wow, what a great review.

Thanks for a great review have you or anyone else done a review of their disc brake disc wheel for triathlon

Really pretty wheels. Thanks again for a great video!

Nice review!

I love matt look.

thanks for the video! very informational, loved every minute of it

Great review! Did you use or review their 36t ratchet hub (name of the hub is RD13, it is used in BWT, Marvel, SLR and Edge disc models)? They say, that it is a good clone of DT Swiss 240 hubs with TPI bearings (a little heavier than original 240, but much more lighter than 350).

Excellent check-up, much appreciated ! 🙏🏾

Seriously, if that's your bike shed/man cave, I'm officially jealous.

I have Elite dt350 Gravel Wheels since a year. Still very true, no problems amd they took some hard beating.

Great review

Elitewheels package are good, same for spoke tension. finish a flawless too. But those white decal peeled up too easily. Also dont get any but toobles tape

I just got some. The bike theyre going on (a 2023 Yoeleo R12) is being built up now at my local shop (because I'm a mechanical anti-talent).

bit of a halo product and moment. Nice!

Very very nice review - entertaining and informative!! Great video! One small suggestion for improvement: It would be nice to tell us your opinion of how good the lateral truing, wheel dishing aso. is, compared to other brands.

@stevenleffanue

Жыл бұрын

Noted!

Another great review!!

somebody please....call the fashion police!!!!!! Great review

Thank you for all the effort with this channel, Steven! 👍 Such a pleasure to see "real life" cycling videos from a person with so much riding and service experience. Most other "cycling" channels are just "bla-bla-bla" with absolutely no value 😂

@stevenleffanue

2 жыл бұрын

No probs Vladimir. You've been a long-term follower of me I know. Cheers

Ordered some!

A wider rim than the Hypers and $200US cheaper plus 3 year warranty. Impressive. The spokes are the same as the Hypers, Cadex, Hunt etc and the hub too is from the same factory. Costing just over $1000US, its a no brainer. Will wait for the next review.

@richardauyeung720

2 жыл бұрын

Hambini's review coming soon

@vietnguyen4312

2 жыл бұрын

@@richardauyeung720 Thanks Richard

@vietnguyen4312

2 жыл бұрын

@@maddyfoster8191 sorry but the justice system has dealt with that, it is not up to us to punish. His content is excellent and benefits thousands of people so who am I to judge.

@maddyfoster8191

2 жыл бұрын

@@vietnguyen4312 says a lot about who you are and where your morals stand. Pathetic excuse

So much expertise !! Thank you sir

If I may ask. Do these wheels roll well? Are they on par with the dura ace c50? Honest advice thank you

Hi Oz, may I call you Steven? Anyway, braking... it seems that dry weather braking on carbon rims is sorted now (if you don’t touch test the rims). However, in the rain? I have a pair of Winspace wheels downstairs waiting for a frame, and last night I road 20km home through a downpour. Even on alloys, that was not so much fun on the downhills...

I am having a shop a shop install a warranty hub for elite drive 50d front wheel. What should the spoke tension be?

A dork disk on the rear hub might be wise to include…….Chain dropping in behind the largest cassette could be disaster out for the CF spoke integrity.

I'm interested in purchasing a pair of Elite 40 wheels. What pressure can you put on these rims when using a tube tire? Do rims have a recommended pressure limit? Thanks.

Nice

Hello there :) Can you please tell me what is the difference between elite marvel wheels and elite drive wheels (rim brake)? Thank you

I am really tempted to get these wheels, but a couple of things are holding me back. It seems that from the reviews I have seen so far there are some issues; Hub issue from trace velo which had been fixed and got sent a new hub, bearing issue in the front hub for oz in the first batch and spoke tension in the front wheel being too low and inconsistent for peak torque as I read in the comments. The latter might be hard to test for a consumer, but it seems like the product being reviewed is not a finished product per say, but a product still in development. Would I get the improved wheelset where all the issues are taken care of, or should I wait untill a new version is released? It might be me being cynical, but I would think it would be harder to get a replacement part if you are not an influencer or the like. Also thanks for the excellent in debth review, would the wrinkeling inside the carbon rim affect the structural properties in any way or displace the weight distribution of the wheels? Did these wheels have less or more abnormalities inside the rim compared to other brands?

@stevenleffanue

2 жыл бұрын

Bearing problem fixed. Im still riding these wheels and no problems. I still recommend these wheels for racing only tho.

Set those up tubeless and they'll feel heavenly... 28mm-30mm

At 8:38 it looks like there is a void left of the valve hole?

I have that pump, unfortunately the gauge gave in after a month. I have another Aldi track pump that I've had for about 5 years and it's been incredible, occasionally use it on my car tyres!

I'm curious whether you have a preference between these Elitewheels or the Winspace Hypers? Both seem pretty similar in build quality and price however, Elitewheels are using a wider rim which seems to be the modern trend for wheels.

@stevenleffanue

2 жыл бұрын

Drive for hilly day or windy. Hypers for fast flat terrain...no wind.

@massmoor

2 жыл бұрын

@@stevenleffanueI had same question but that's confirmed it for me what to buy as it's very hilly and always windy where I live!!

@sikadkev9165

Жыл бұрын

im confused between winspaces or elite :(

You mentioned comfort, how would you rate them relative to other factory direct Chinese carbon wheels you've tried?

@stevenleffanue

2 жыл бұрын

It's the carbon spokes that seem to absorb more vibrations than steel spokes. Only downside is , how long will carbon spokes last?

Have you ridden the 40mm deep versions? I would like to know how these compare.

@stevenleffanue

2 жыл бұрын

Sorry , no I haven't.

Hi Oz, Did you get a chance to test the Yoeleo SAT wheels? If yes, how do they compare to Elite Drive? I mostly do hilly rides and all reviews state how fast these wheels are when it comes to climbing.

@stevenleffanue

Жыл бұрын

I haven't tried the latest Yoeleo SAT wheels but from Yoeleos reputation I'm sure they're good.

I'm looking for my first truing stand. Do you like the one you used in this video with the dial guages or the Park Tools one? Where did you get this one?

@stevenleffanue

Жыл бұрын

For building and truing wheels definitely Park stand. The other is just for measuring wheels.

Thanks for everything you do! We all appreciate it. Interesting would be a video about silent (chinese) clutches if there are any. Would be good for the kangoroo ears;-) I tried to silence mine, but noises reappear fastly.

thanks for the great review! I would like to know if there is a way to make the freewheel hub a little quieter when freewheeling, just sounds to loud and pronounced noise.

@stevenleffanue

24 күн бұрын

Slightly thicker and more grease in the clutch will quieten it down.

@arnodivalentin5639

21 күн бұрын

Thanks I'll give it a try

When it comes to stiffness, can these wheels be compared to wheels, e.g. DT SWISS ARC 1100 62mm Enve Foundation 65? It is worth buying them they are suitable for sprints / racing they are not too soft and bend ?

@stevenleffanue

Жыл бұрын

Definitely good for racing, but not for heavier riders (90+ kg)

@TheWip140

Жыл бұрын

@@stevenleffanue I do not know how their stiffness compares to competing brands such as DT SWISS ARC 62 or ENVE Fundation 65. Was it possible to test those wheels? Drive wheels They are very stiff they do not give up / they are not too soft floating when accelerating, e.g. My weigh is 72 kg

What brand/model endoscope were you using? Great video.

@stevenleffanue

2 жыл бұрын

Cheap from Aliexpress....works great. Make sure it's wire is soft and flexible otherwise it want go around corners well.

Planning to run 35c Rene herse tires on gravel bike, for mostly paved riding, was set on Ican 46 aero, is this a better option or some other affordable wheelset? Thanks

@stevenleffanue

2 жыл бұрын

Yep , that's fine. ICAN wheels are very good. I'm doing a gravel build soon and using their G25 set.

@tyren818

2 жыл бұрын

@@stevenleffanue thanks for the reply

I am concerned about the wheel height. I have used Dura Ace WH9100 C35s and 20 mph cross winds would dramatically shove me (I am 6' 1" and weigh 160 lbs). The lowest profile is 40 mm for the Drive. I understand that the Drive are much wider the the Dura Ace and minimize the vertical profile. Will the Drive wheels be driven just as much as the Dura Ace C35s?

@stevenleffanue

22 күн бұрын

Understandable. We had quite a few riders here who had same concerns. They got the deeper wheels, and months later they not even thinking about it as they subconsciously adapted to how the wheels feel in crosswinds. Extreme crosswinds will affect you no matter what wheels are used , most of the time it's no problem.

hello again, well I finally got around to assembling my Cinelli Superstar frameset, with Campagnolo Chorus 12speed group set, I also bought a pair of those Elite 50V rim brake wheels that you did a video about. Well the problem I'm having is the clearance between rim and brake pads. The brake pads rub on the rim. Is there anything that can be adjusted on the brake calipers? I have taken the brake cables off to ensure that there is no pulling there.

@stevenleffanue

6 ай бұрын

Try removing the 2mm washers between the pad shoes and caliper arms

@arnodivalentin5639

6 ай бұрын

you know just after I left that comment on your you tube page I look at the instruction manual that came with the brakes to see if there was any info about that. All I found was they say there is a very small screw on the caliper for adjusting imbalance of the brake pads. Well I gave it a try and voila it works, calipers opened up by 1.5 mm. Thanks for the info any how.@@stevenleffanue

@arnodivalentin5639

6 ай бұрын

I thought about that but that spacer in Concave on one side,there is a reason why its there. So removing it is not an option

Any chance you could do a review on Australian made Caden wheels?

@stevenleffanue

2 жыл бұрын

I'll send them an email and ask.

I have basic ELITE PRO V brake 50mms with standard hubs,havent missed a beat in 2 years!

shiny rims - I don´t belive a word! I´m sure you have waxed them... :-) great videos anyway!

Can you do zipp 454 nsw

I used your 15% off code and love these wheels. So thank you for a great review. 1 question if somebody can answer. The rear freewheel is a little too clicky ( loud) for my taste. Would any other freewheel fit this setup, or is it a elitewheels specific hub that can't be changed. Any help is appreciated. Thanks again :)

@stevenleffanue

Жыл бұрын

Put a bit more grease in the clutch and it will be quieter.

hello, How's the stiffness of this 50d compare with the hyper wheels? Thanks

@stevenleffanue

2 жыл бұрын

Almost the same , the hypers maybe a little stiffer because of the 65mm rim depth. Both use carbon spokes.

Great review! What tire pressure did you use when riding these wheels?

Hi Oz. Love your videos. When reviewing these wheels you've covered just about everything but unless I'm mistaken, you don't give an opinion on the freehub pick-up / drive engagement lag. The Elite Drive wheels use a 4 pawl hub with a 36 tooth drive ring and thus have 10 degree angle of engagement. My current wheels have 6 pawls and a 102 teeth drive ring which gives a very rapid 3.5 degree AOE which I love. What's the drive pick-up like with the Elite's out in the real world on the road ? Would I notice the difference between 3.5 and 10 degree AOEs ? One other aspect I don't think you've covered is what are the Elite Drive 50s like in crosswinds ? I've a different set of 50mm section wheels which are badly affected by crosswinds.

@stevenleffanue

2 жыл бұрын

You want notice engagement difference on a road bike....more engagements are good for trial bikes,bmx and some cross-country. 50mm section isn't as bad as a 70mm but better than 35mm. It's that simple with crosswinds

@maddyfoster8191

2 жыл бұрын

Don’t support Steven John Leffanueis he is an animal Abuser and brutally murdered a dog in Victor Harbor

@visibal7693

2 жыл бұрын

@@stevenleffanue You were on the news for stealing and killing a dog, true?

Enjoy ur forensics. Keep up the good work

Will replacing the stock hubs with Dt swiss 180 hubs offer any marginal gains?

@stevenleffanue

11 ай бұрын

Very , very marginal. Slightly lighter.

Hi Oz, Thanks for the great and honest review. I have an unrelated question about waxing, i'm current using connex chains, i have 4 chains in cycle meaning i will swap the chain every 300-350km, and end up waxing at least 3 chains at a time if not 4 that is about 12 days per wax-job, but lately i have noticed a problem that when i take off the first chain and keep it in a clean bag then store it in a cabinet, but found out the chain got a little bit rust on the surface 10 days later when i was ready to do the waxing. I know that might be because of the humid or water when i kept in the bag, but still wondering what do you have to say about this problem and any suggestion on how to prevent it later on and how to get rid of the rust on the chain surface? Thanks in advance and always appreciate your kind work for the open community.

@stevenleffanue

2 жыл бұрын

Allow the chain to dry out. Leaving water on a chain will corrode it.

@willyturing1803

2 жыл бұрын

@@stevenleffanue Hi Oz, thanks again for the reply , the only problem is that i'm 100% sure i didn't ride on the wet, i guess the only chance might be the water vapor from the air or something like that, anyway i will watch out this time, will do something extra manually to "dry it out".

Hi , how is the wheelset so far. We have a AD selling these wheelsets . I m looking for racing wheelset. How is momentum of the wheelset ? stiffness sure is hard.

@stevenleffanue

2 жыл бұрын

They are going great. There is less momentum because they are so light compared to heavier wheels but they fly up slight to medium grade hills. I highly recommend them for racing.

I like Elite's wheels. Only issue I have with their lower end wheels is the rear hub. They don't do a replacement freebody for the RF08 hub.

@borano2031

2 жыл бұрын

Are you sure that the freehub is proprietary?? Look around at other manufacturers freehubs.. Rgr

@chrispalmer3096

2 жыл бұрын

@@borano2031 not sure it is, but can't seem to find any. Will probably have to take it off and visit a bike shop.

@borano2031

2 жыл бұрын

@@chrispalmer3096 Yes, take it off and search the large auction site, where manufacturers list their products and compare to yours. Novatec, Powerway, etc... Rgr

@chrispalmer3096

2 жыл бұрын

@@borano2031not needing a replacement yet, but aluminium freebodies do get gouged eventually...so will do that... thanks fella

@azngouki

2 жыл бұрын

I believe they do sell the hub body seperately. You will need to inquire with them unless they have changed. But when I ordered my wheels I inquired on adding extra bodies and was provided a quote. I'm running their lower end set with around 10k kms and zero issues so far.

Is this worth it wheels?

Bonjour, je possède actuellement une paire de winspace d45 2023 Je suis plutôt déçu...je m attendais a un truc de fou ! Avec beaucoup de réactivité et une grande légèreté au moment des relances...au final c est a ce moment que je les trouve lourdes!! Et fatigantes a relancer 😑...j ai contacté winspace , ils disent que le problème vient sûrement du fait de la rigidité de la roue et de la tensions des rayons ! L effet" élastique" catapulte " serait annulé. C est vraiment dommage pour moi car mes courses sur petits circuits demandent beaucoup de relances 😥 Ma question du coup....j aurai le même problème a les 50d??? J'espère avoir de vos nouvelles 🙂 Merci pour votre travail 🙂 Christophe ( France Normandie)

What model Victoria tyres did you put on?

@stevenleffanue

Жыл бұрын

Rubino Graphene 2.0

Do you guys experience verticle wobble when your wheel spin at a very high speed?

@stevenleffanue

2 жыл бұрын

That is usually a weight balance issue. I have a video here which shows you how to correct the balance.

@NA15916

2 жыл бұрын

@@stevenleffanue Hi Steven, may I know is 0.42mm deviation of lateral true still consider an acceptable range??

Кампа Бора Ультра лучше? Или эти ? Элит..

Thanks for this. Subbed. I'm thinking about getting a pair of these wheels. Being 28 mm wide they seem better suited for 28s than the winspace which are optimised for 23s or 25s at a push. If you subscribe to the 105% rule (which I don't quite understand, or know if it's actually a fact) then with all other things being equal, quality, aero efficiency etc, these would be a better choice than the winspace if you plan to ride 28s. What do u rekon?

@stevenleffanue

2 жыл бұрын

Seems road tyres are going bigger , so maybe even wider rims would be good. Road surface would play a part too at a guess.

Just received my Drive50 wheelset. Ordered with silver decals and dished rear wheel for Cannondale- wheels arrived with black decals and not dished. Simple order instructions were missed, really disappointing.

@stevenleffanue

Жыл бұрын

Sorry to hear. If not as you ordered they will exchange for the correct wheelset.

@linasrakauskaseuexport8264

Жыл бұрын

@@stevenleffanue Elite offered to wait another 20-30 days for new delivery as DHL too expensive for them. Btw absolutely great channel, love it. Thank you sir.

Hi Steven, is already been almost a month. May I know do you experienced any problems regarding this Elite Drive wheelset? Or it did a great job until now without any problems?

@stevenleffanue

2 жыл бұрын

They are still going strong Christopher , no issues yet

@NA15916

2 жыл бұрын

@@stevenleffanue Hi Steven I got another one question sry for that. So I am going to build a new road bike, what should I get for my disc rotor? Using both 140mm, both 160mm, or using a mix of 140mm for the back and 160mm for the front?

@stevenleffanue

2 жыл бұрын

Up to you. Personally I use 160mm front and back.

I didnt know they made wheels with different spoke counts on opposite hub sides. Is this common?

@stevenleffanue

6 ай бұрын

Yes, more and more carbon wheels are going that way.

hi, very nice review, I purchased a set of these just got them today, (order in feb) I ordeedr the rim brake version, but my wheels came tubeless ready and i don't like that, i have tubes and tires, do i have to remove the.... not sure what call it (tape or seal) in the wheel well before i install my tires and tubes?

@stevenleffanue

Жыл бұрын

You can leave the 'rim rape' on for normal tubes. Happy riding

@arnodivalentin5639

Жыл бұрын

@@stevenleffanue yes ,but won't the tape keep the tubes from sitting lower in the wheel well?? Just an observation hmmm

@stevenleffanue

Жыл бұрын

Only by a fraction of mm. If it makes tyre installation too difficult replacing that tape with regular rim tape will solve it.

@arnodivalentin5639

Жыл бұрын

@@stevenleffanue yes, I was just concerned about tires popping of the rim when pressurized.

@arnodivalentin5639

Жыл бұрын

Just another note not about the elite wheels, but after seeing your video on making the tool to straighten bent aluminum rims, I decided to give it a go and repair my Pinarello Most Panther rim(rear) to use on my Pinarello Prince aluminum frame,(with carbon forks and stays) my problem is that when I am on the largest sprocket the rear derailleur touches the spokes. I have adjusted the der. many times but can't get the sweet spot, either I can't get it into the large sprocket or it touches the spokes very lightly. Is there a thin spacer that can be put on the hub? Thanks for your expert advice! ps I want to use this bike with those wheels for when I go to work.

AAAJJJGGGGG 50MM 1240g , GOOKIILLL

@rakhmansetyonugroho4820

2 жыл бұрын

beli dunk yg seri drive

Bought a set of elite wheels G45 wheels on the strength of several reviews, however I'm struggling with first setup. Rear wheel will not spin when the cassette is attached with even minimal torque. (it will freewheel with a very nice sounding ratchet. but wheel seems to be stuck when trying to pedal) Is this something I am obviously doing wrong? (cassette is from another bike with same Shimano freehub standard, swapped back with no issues on old wheel). Any advice, much appreciated!

Im on the fence on these. Drive 40v. Do i have your blessing?

@stevenleffanue

2 жыл бұрын

Sorry , I've not tested the rim brake version Erik.

@Eirikkinserdal

2 жыл бұрын

But the ride overall should be similar?

@stevenleffanue

2 жыл бұрын

Yes. Very nice. I've only done about 600km on them but bearings are going good.

Doesn't have drain holes?

@stevenleffanue

7 ай бұрын

Yes , 1 each side of the rim.

Hi Steven, Been watching your videos for a while now and I certainly learn more from them than other others on KZread as expert as they are. have you been expanding your workshop into a more full time occupation? Looks very busy for a "hobby". Cheers Vic much appreciated.

@stevenleffanue

2 жыл бұрын

Glad your enjoying the vids Vic. It's temporary workshop till new one finished.

@maddyfoster8191

2 жыл бұрын

Please research this evil vile man he is an animal abuser and has pleaded guilty to brutally murdering a dog in Victor harbor Steven John Leffanue is a disgusting waste of space

Do you have a new shop/workspace?

@stevenleffanue

2 жыл бұрын

Temporary whilst new one in the pipeline.

@maximiliangutmann

2 жыл бұрын

@@stevenleffanue this is awesome!!!!!

I'll stick with my "rim brakes" 👌🏻