I think jimmy became one of my favourite bald people. The fact he’s competitive yet doesn’t give a shit all at the same time is wonderful.

@yungteach

7 ай бұрын

Who are your other favourite bald people?

@xela794

7 ай бұрын

@@yungteachLarry David would come to mind

@Ashbridg3s

7 ай бұрын

@@yungteach oh well you know the normal guys. Billy Corona, The rock, vin diesel, Patrick Stewart, etc. and of course granddad

@iliakuryakin

7 ай бұрын

Do you have a directory or something? The Bald Book?

@MedvedActual

22 күн бұрын

@@iliakuryakinChecking under "B"....

Hi guys. Watched this clip and thought I’d drop in my thoughts. In general as you said not having a worthwhile warranty plan for your Chinese wheels is a problem for a start. This creates the possibility for some manufacturers to cut a few corners to bring in these products at this crazy price point. That should alone set a few alarms going. Maybe you get lucky as Francis has but I wouldn’t go looking for potholes.. From what I can tell here. The side wall thickness is optimistic at best. The other, and more important issue we have seen for some years is ‘dry carbon’ meaning the prepreg carbon simply does not contain enough ‘glue’ to bind the carbon fibers. They are getting away with it on frames if the paint work is good but it’s new territory for wheel makers looking to skimp on manufacturing costs, why? 2 things spoke tensions exacerbated by impacts/vibration. This wheel has failed on the seamline of the tire wall. Basically the outer side wall delaminates when the bond is poor. It used to be spoke pull-throughs, a problem a few years back as some of your subscribers will attest to. Poor choice of where to put carbon and unreliable supply chains lead to variable quality. Who checks these batches..mm let me think…you do!

Just as a public service announcement, Silca stuff is discounted 30% right now on Amazon. The only problem I have with their lube is that I've now ridden 16,000 km on my KMC chain, waxed with Silca and treated weekly with Super Secret. The damn thing just won't wear out, and I've got a custom celeste colored replacement waiting in the wings to put on my Bianchi. At this point, I may just have to accept that Silca has made my drivetrain immortal.

@chris1275cc

7 ай бұрын

I know you are joking but it is the only downside I have found to waxing. I've noticed that at a glance all the chainrings on all my bikes look excessively worn, because there is no dirty oil to disguise where the anodizing has gone from the teeth, and because of waxing I'll have those rings for a very long time.

The noises that Jimmi was getting from the wheel were horrific.

I was quite impressed recently when I tried some Aliexpress DT Swiss 52 tooth ratchet knockoffs. For the price compared to the legit product I figured it was worth a try. They worked beautifully, sounded great for... five kilometers. The parts broke on a short, punchy and somewhat aggressive climb. I contacted the seller, they offered to replace the parts. I told them I didn't have confidence in the product and would really prefer a refund so I can buy the genuine product. They said ok, and gave me the refund. I think they are getting better with warranty and customer service but it is still a a case by case thing as there is so many manufacturers/sellers.

@Doc_Raphy

7 ай бұрын

I'm currently using a chinese hub using the DT Swiss ratchet standard. The fact that its parts are almost all replaceable if ever they go wrong is amazing. I literally don't have to worry about getting a new one if they fail on me. I'll just have to get a new set of ratchets or bearings and it'll work again, good as new.

@robertmcfadyen9156

7 ай бұрын

We cannot trust anyone in the bicycle industry it seems . Riding anything has risks .

@vihuelamig

7 ай бұрын

@@robertmcfadyen9156 Well even cars from the big well known manufacturers have recalls. Nothing is 100% certain, ask Shimano or rather don't ask Shimano.

Josh actually saved the Italian Silca brand legendary Pista floor pump. When he traveled to Italy to offer to buy the brand for the Italian owner. The company have already sold their factory and all their equipment. So they had to visit several craftsmen to order each specific part made to build him a Silca floor pump.

@ltu42

7 ай бұрын

Essentially, a new company with new products engineered from scratch bought an old dying brand. The fake-o italiano product names are just posing, they're not even grammatically correct.

@iMadrid11

7 ай бұрын

@@ltu42 The Pista floor pump internals are the same as the original design. They just aesthetically updated the externals.

@ericpmoss

7 ай бұрын

@@ltu42OK, but the new Silca stuff is 10x the quality of what I bought from the original Silca 20 years ago.

@andrewmcalister3462

7 ай бұрын

@@ltu42 There's an element of truth to that. On the other hand, Silca still supports 25 y.o. pumps from the previous ownership with spare parts, etc. Who else in the industry is doing that?

@K777John

7 ай бұрын

I loved the Silca frame pumps but decided that a Topeak one at roughly 17% of the price would do me for now. To be fair the plastic Raleigh branded one I have had for the last 30 years has only just gone since I lent it to a mate who bent the shaft by being too enthusiastic with the pumping……

had a Canyon Aeroad CFR (MVDP Edition the blue one) the frame was so fragile manufactured that you could create noises on different places on the frame. Canyon replaced the frame and it came in a complete different Quality...

Congrats on Silca Sponsorship! Its awesome to see y’all growing!

As an "OLD GUY" cyclist / LBS mechanic from the 1990s I love a great frame pump. Anyone rememeber the neon yellow Zefal frame pumps? Who else remembers high pressures to avoid pinch flats, or worse heavy anti puncture solutions like thicker tubes? That being said new tech is the best. Go TUBELESS!!!! I've been tubeless on my MTB since 2001. In 2010 I converted my Mavic Krysruim Aniversiary road wheels to tubeless, with little more than valve stems, Hutchinson Fusion tubeless tires, and tubeless sealant. Since then I've never looked back. In all those years (yes once you reach 50+ you talk in years and decades) I've had so few flats while riding I can count them on 2 hands. I'd say less than 10 flats requiring road / trailside fixes in over 20 years is a solid argument for tubeless. Note I still carry a spare tube, CO2 canisters, and patches on each ride just in case. What to do with a $600 euro floor pump? Same thing you do with a $260 euro Colnago corkscrew. Sip expensive vintage wine while working on your Colnago Master next to your Ferrari GTO or Austin Martin DB5.

been using Elite wheels... 6 years - 7 pairs. One issue with a bad bearing. But solid. Beware where you buy the products, Knock offs are everywhere. Test with ultra-sound.

Yes, I have been waiting on the review for these wheels as well. It is my understanding that Ryet is a subsidiary of Uno, a Taiwanese company, the same company that sponsors a pro bike team. You would think their quality would be better. I puchased a set of Ryet wheels at $390.00 that looks like the ones Frances bought, not like the ones Pierre bought. Look closely, they are different models from the same company. I have ridden over 3000 miles on these wheels since my purchase in February 2023 without problem. The advertisement said the wheels would weigh 1730g, they weighed in at 1750g. Heavy? Okay I guess so but, as advertised. Hunt all season aluminium are about the same weigh, for the sake of the weenies. I'm kinda disappointed that you didn't have your wheels checked by one of your carbon expert "mates" to ensure the soundness of your wheels. I would have been curious to find out since you and I bought the same model of wheel but that is my prejudice. Overall a good piece of journalism even though it wasn't complete. Thanks for the entertainment.😂

@alexdiaz2812

7 ай бұрын

I have the same wheels that you, and works perfectly, strong and smooth, I guess that was a fail of production!

Big fan of y'all, Josh and the Silca brand of products (I too use and love the first gen frame pump)... their warranty on product and customer service is all top notch. Congrats!

Silca's saddle bag is awesome. I was sceptical about the boa thing, but it is really practical, and looks great too.

I am thrilled to see your association with Silca, congratulations! I am a huge Silca fan and use many of their products. I have always found that while their prices are generally towards the top of the range for a given product, their quality is typically far beyond any competitors. I have never been disappointed in a Silca purchase or product.

@stephencharles6932

7 ай бұрын

Happy for you that your order gets delivered to you. Mine does not!

@JackFou

Ай бұрын

“Towards the top off the range” Bro, they’re selling mini pumps for 80-100 bucks. I love good quality as much as the next guy but that’s just nuts. These aren’t even particularly lightweight or anything.

Glad Jimmy made the Chinese section clear. I was the UK distributor for a far eastern brand. There is good and bad chinese direct carbon. I did my research as a former sceptical product design engineer. I found there's good and bad Chinese carbon and I totally agree accountability is key. I ensured they met ISO and EN stds. Of the sales we made over two years for wheels and frames I only ever had 1 crash damaged and one warranty issue and in both cases the brand replaced without question. The comprises with china direct is shipping time approx (2-6wks) depending on supplier and stock.

The Silca floor pump is wonderful. Bought 25 years ago, you can still get replacement parts. One thing I found is all that oil and crap that sneaks in over the years gums up the ball check valve in the base. Easy fix. Nearly immortal!

I've had the same Silca floor pump for the past 25 years. I've replaced the leather a couple of times, the hose once, and the valve rubber. Serviceable>disposable.

I am still using a Silca Track pump I bought in the Seventies, still works, pressure gage is still accurate, but the grommet in the connector had to replaced 2 years ago🙄 Even the polythene sleeve it came in still protects it. If you need a word to define quality, “Silca” nails it👏

At last my most awaited review, been waiting for this!! Edit: Was planning to get them, but I now stand with what Jimmy said "Warranty is Important"

I've seen a similar behaviour in a wheel in which the inside of the wheel pressurised whilst someone was setting up tubeless. If the rim tape or valve hole leak heavily when using a compressor or chamber type pump its possible to pressurise the chamber inside the wheel and cause delamination like this.

The end of the video with Jimmy in the tiny glasses from Mailbox Monday 😂

Talking about the lack of QC in the cheap products is also a factor of them being cheap. Adding steps in the factory to ensure consistency before shipping. After checking every product, the ones that wouldn’t be to standard get thrown out not boxed up and sent to a customer. So the higher cost is partially paying for the materials/labor of the rejects which adds cost.

I have those silva bags and I wrap them on my seat post. The boa clamp allows it to stay tight and not move around. I also use their wax lube products. They are fantastic, the hirabel stand, and finally, I have one of their mini pumps. Love their stuff.

I use old drop bars on my repair stand, works exactly the same

@matthewlewis2072

7 ай бұрын

That's what my mechanic uses

@rohanworsey5055

7 ай бұрын

@@irfuel I see what you are saying however it’s the same as those rubber straps in the video, the bike will still move. Just cheaper alternative to use bars in my honest opinion. 😃

Not had any issues with my Elitewheels ENT disc 50mm deep, 25mm internal. £290 to my door, ridden around 80 miles without issue. They spoke to me all the way through the process. I've got a Ryet 3d printed seat and its been amazing.

That seat pack is my favorite piece of gear, I have a c02 inflator, 2 c02 cartridges, multitool, tire lever, dynaplug tool and extra plugs, patch kit, backup tube,$20 and extra spd cleat and hardware all comfortably in there with room to spare

I like shallow alloy wheels with 3x lacing, they just ride better and no drama of wondering if the rim will fail.

@johndef5075

3 ай бұрын

Thats what I just built. Havent got to ride them yet.

I had a beautiful red SILCA pump stolen out of the back of my Jeep Cherokee in the mid 90s. I recall paying a lot of money for it back then, and I never replaced it. I miss that pump, it was great - but since then I've realized that the €20 plastic Decathlon pump puts air in the tyre pretty much exactly the same. Nice to see if I ever needed a very overpriced yet really nice SILCA pump, I could get one.

The Silca Terra is a beast of a floor pump. I bought it as my do-it-all bring-it-anywhere pump and it's survived a hectic CX season of teammates and randos grabbing it (it's to be shared!) and getting tossed in my trunk. It looks untouched! It's so relieving to know how durable a product is such that I don't have to worry about it. And of course, Synergetic is the only lube I use (likewise just can't be convinced to the trouble of waxing a chain).

I've only ridden on alloy rimmed wheels but looking at the wheel that failed I Think I'll stick to what I know. Great content 👍 as always.

I was lucky enough for my Chinese manufacturers to cheap-out on carbon on my 88mm deep section wheels, by replacing it with fibreglass. I crashed into a car, blew the tyre out, but the wheel survived. I had it checked by a carbon specialist, and he said the fibreglass saved it. Double win... heavy though.

I really like Silca products don't love the price but you get what you pay for. The Hirobel Clamp is game changer for our Tandem....just imagine clamping a Tandem on the rear seat post...you can't clamp the front post because that's where the stoker stem mounts.

Silca has been around for over 50 years. I have custom painted Silca frame pumps (with Chrome Campy pump heads) on a couple of steel bikes that were made in the 70's with pumps from that era. The original Silca made nice products at affordable prices and was mainly known for hand and floor pumps and brass air chucks. The Silca name was later purchased and the new Silca went very high end and broadened their product line. The current Silca is nothing like the traditional one and only shares the name......

Jimmy hits the nail on the head! When buying a product it's not just about the actual item you're buying it's the consumer aftercare too! That's what worries me about sending my expensive money to China! I ride lots of budget carbon products that have more than likely come out of the self same factory as the wheels in this fim like Prime products from Wiggle. But I know where I stand if something goes tits up!

I quickly check my newly bought rim(only) from Ryet while watching this video. No problem found yet, hopefully after being tested still the same good condition. Thanks for the honest rim review.

Ok So I have a Matone saddle bag on my road bike and it's super nice...hold just the right amount of stuff. I had their seat roll before that and...nah...the Matone is better. I also have that work stand widget...its great and easy to use. It's expensive becuase of the surgical silicon that is used on the "round" mount points. Josh wanted something that wouldn't draw the die out of your frame. I guess some rubber does that? Dunno but I feel it's just safe to have and not clamp carbon, ever. The chain prep stuff revolutionizes the chain waxing process. No more multi step stripping...I was skeptical initially but tired it and it's fantastic. I'm going to assume the surprise at the end is some Ti shop tool(s)? They look amazing but I just can't justify the cost.

Picked up some Ryet 50 mm carbon rim brake wheels they seem really well built perfectly true and around 1490g for the pair with pillar 2015 spokes. Cant see much difference with my hunt wheels. only these are lighter. Will test spoke tensions before use. Most carbon rims are made in shenzen so this could happen to any brand

@alexdiaz2812

7 ай бұрын

I agree with you, I have some Ryet wheels, and I have ridden many kilometers without problems. They even survived a crash without problems, (I sent them to be reviewed), I think it was a production failure, I should negotiate with the seller for an exchange

Great to have Silca on board gents. Great products. Mattone seat pack and oil I use and would definitely recommend

I ordered a groupset from Ltwoo. Delivery was so delayed, that i bought a Sram on Amazon. Returned the package right in the post office and never even touched it. Refund was reduced by 30% due to bad packaging.... Chinese companys more than often rip off people, it is a common habit.

I buy from Elite quite often, their AliX shop direct. It works very well. It’s been about 4 years & no issues. I have 3 sets. Latest is their Edge 36T. 3 friends bought from them, & one after 2 years got a replacement. He paid 99p for shipping, it didn’t take long to get over. It’s clear that Ryet’s model is not very good at all when things do go wrong. Just be wary of your purchases. In our cycling club, we buy from a diverse variety of brands. There were issues with 1. Giant’s hub, replaced by dealer. 2. Problems with VEL wheels, one wheel replaced This isn’t bad out of 60 off cyclists in the club.

I'm very happy with Silca's products and very happy to see you sponsored by them! I've had nothing but success with their pumps, hot melt wax, chain stripper, drip wax, tubeless sealant, garmin mount, and bar tape. I recommend their stuff to everyone because how many other brands do so well across such a broad range of categories? If they make a product I need more of or need to replace I look to see if they offer it first because they have earned my trust as a very high quality/best offering I've found. Silca may be expensive but in a lot of cases the competitor's products at the same/near same price are noticeably worse, inferior engineering, or don't last as long. Hot take: Josh is like the bike Steve Jobs. Innovating way ahead of the competition. Carbon in the sealant to form a "fibrin clot" similar to human hemostasis, pebax bar tape (that's the foam in the nike marathon shoes winning almost everything), all in one chain stripper that' isn't terrible for you/environment (look at how people used to strip chains), emulsified drip wax(this is some chemistry magic), sous vide bag hot melt wax(so you don't need a wax pot removing the major barrier of entry genius)...nobody else is doing some of this stuff and if they are it's typically that brand's sole focus! Don't change Silca!!!!

I would love to know how a new silca frame pump compares to a vintage one from the 1980s!

@ericpmoss

7 ай бұрын

I and my friends have Silca from 40 and 20+ years ago, and the newest stuff is sooooo much nicer than any of the original. The oldest is a bit sloppy but super reliable. The “super Pista” from 20+ years ago works, but feels and looks like junk compared to the new pumps. The new stuff is very expensive, but the fit and finish is 3+ levels above.

@FRobot-rx4kz

7 ай бұрын

thanks for the insight!...I keep coming across old silcas on the local second hand markets...i might pick one up if the price is right.@@ericpmoss

That’s a good point, other reputable brands from Europe might even manufacture in china or the east too but they get the trust bonus (personally) that they at least try to solve problems IF u encounter some.

A €240 mechanical pump? Why? My decathlon pump is 10 years old and still going strong. Cost me £10 at the time.

@ericpmoss

7 ай бұрын

And a $20 Casio watch keeps time better than a $5000 Rolex.

Every time I get disappointed by a cycling accessory I look at Silca. That's why I have a floor pump, bottle cages, mini pump, and a saddle bag from them. No regrets.

@mcspikesky

7 ай бұрын

Even lightweights the wallet

I just love the realization that frame pumps are the nuts!!! Also a great baton for warding off unfriendly dogs!

I've had a near exact same experience with a Farsports handlebar, except they're not honouring any warranty or taking responsibility. Happy to send that in if you want to name and shame!

As an occasional fixie cyclist in very flat east London, 99% of what these two actually talk about is mostly meaningless to me.. but they're up there with my other favourite prats on youtube.... keep it up!

I was looking at Ryet after your unboxing but decided to go with Elitewheel but in the end got a very good deal for Lun Hyper. The reason why I didn't go for Ryet is 1. You took a long time to post any thoughts on them which means there might be a problem 2. The aliexpress review sections have alot of defect reviews as well, carbon delamination in all of their product from bikes to wheels and handlebar. When compared to Elitewheels it doesn't have delamination problems. It's just way too much of a risk to get Ryet

@chriscross5689

7 ай бұрын

I've got the Elite Drive rim brake and been sound so far.

I "like 👍" your videos before watching them now. You never fail to deliver.

I own too many Silca products, the Tattico is still my favourite pump, including the full-frame pump. A comparison with the gravel version might be a future video idea?

Turns out Josh couldn’t have founded Silca unless he was 130 years old - but he did acquire it and transformed the company a few years ago. Great to have Silca on board as a new sponsor, here’s a code for 13% off for Cade Media audience members: CADE13 silcavelo.eu

I didn't get cheap carbon wheels but I would still appreciate an advice - is there a reliable way to tell apart surface scratches from forming cracks? Been riding my Levante wheels a few percent above the weight limit and I am trying to be extra careful. Thanks

Thank you for making videos like this 💯💯😎 It helps us consumers who cannot afford to buy very expensive bike products 👍

SuperTeam. Say it with me. SuperTeam. Affordable, quality wheels. I've been riding a set for years now and they are still amazing. Stop with all these other bargain basement wheels. SuperTeam. Not that you'll ever see this, but I've suggested these wheels literally dozens of times. And their customer service is really, really good as well.

@abedfo88

7 ай бұрын

💯 can back this up. Been riding various different sets since 2015. They are freely available on ebay in any configuration you'd like

@fennec13

7 ай бұрын

I have 2 sets of Superteam carbon wheels. Ridden them over 10k between em for over 2 years. They are amazing and quality wheels . Especially for the price point. Would always recommend Superteam.

@Jalfred92

7 ай бұрын

Do you find them stiff enough? I have a couple of sets of classics (50mm rim and 45mm disc) and they are great but I do feel the flex and they catch the rims and discs when I get out the saddle.

@shepshape2585

7 ай бұрын

@@Jalfred92 I find mine plenty stiff. Never had an issue with the wheel flexing. Maybe you’re just putting out some crazy power?

@shepshape2585

7 ай бұрын

@@fennec13 We need to get these guys to get a pair and review them. I just never have any luck getting their attention.

A balanced and very informative video. Thank you for the great content

The "Big Brands" are also coming out of China, sometimes the same factory. Good Chinese wheel have great service. Winspace, Farsports, 9Velo....

I actually think Ryet did alright by offering replacement based on pictures and videos. I wouldn't have minded paying little shipping cost, end of the day, it's coming from opposite side of the world. Shit sellers could have ghosted or blamed rider, which many renowned brands actually do. With a famous European brand, I had to ship back wheelset for their QC to check my claims and whole process was quite tiring. I'd rather pay less than a third price from Chinese direct sellers.

A second comment to say great at getting Silca sponsorship. I’ve watched videos with Josh and he is great so hopefully you can get him as a guest. But (there’s always a but) your Pro Bike Mechanic Nick swore by Fenwicks just a few months back, I bought and I’m sold!

Hey guys, i have had the same problem with my Elite wheels also known as Drive. Wheel has a bulge they want to send me a replacement with a fee of 60€ but only the rim!!!! So on top of that i need to get a whole new wheel built up

I have them as well, The product came in damaged, out of true and they promised to replace it after sending some photos of the issues, which I did almost immediately. After a few days of sending them messages asking for updates, they won't replace the wheels. They say it's perfectly safe to use, and that I should use them. Terrible customer service.

The boa for the seat bag is a play on the old school shoe/pedal straps holding a roll up bag

They essentially have no consumer protection laws or even copyright as we know it in China. It ends up a roll of the dice on a lot of stuff. We all buy good stuff from them on a regular basis, but really, you just never know... I think Trace Velo said it best, although this is not a quote: YOU are the QC with a lot of it.

16:29 He rolled the wheel away 😂😂😂😂😂😂😂☠️

That tubeless sealant is AMAZING! Only one I will use from here on out.

Silca sealant dried on my wheel in less than 2 months and i ended with unsealed small whole, and was very painful to remove from the tyre, also it blocks the valve

I absolutely love my Silca frame pump. They make good products.

£240 for a wheel set… logical purchasing has left the room. When will people be able to distinguish between cheap and good bang for your buck.

@fulconandroadcone9488

7 ай бұрын

I was never a fan of carbon and I'm only willing to use metal for anything important. Weight is a bit overrated especially if you are not racing.

@87togabito

7 ай бұрын

It’s the exact opposite. If you’re NOT racing, then carbon it is. It is breaks, just buy a new one. And as a non racer, you’re not gonna push the bike hard anyway. Cycling is largely a luxury sport anyway; something you do for leisure if you’re rich.

@fulconandroadcone9488

7 ай бұрын

@@87togabito why not alloy for non racing? what do you get from carbon for weekend coffee ride?

@avocette

7 ай бұрын

​@@87togabitofound the non-utility cycling consumer

@siimot

7 ай бұрын

Of course you can get a good wheelset for under £240 maybe not carbon but I don't really need that.

We’ve got a similar frame clamp at work, great for TT bikes with stupidly deep profile seatposts that won’t fit into the normal stand clamp 😂

Congrats on the Silca deal, that’s top tier stuff. 🎉 I bought a Tattico due to pump action Francis action 😅

a had a very similar problem with Yoeleo Carbon wheels. They are another chinese manufacturer and supposedly have a bigger emphasis on QA. The Rims even cost 800€ instead of just 240£. The tyrebed sepperated from the rest of the rim very simmilar as the wheels in this video, you can see them seperating at 1:27. Also Yoeleo refused to replace my wheels because they were a couple of months out of warranty.

I use that Silca saddlebag, the hotmelt wax and their sealant... I need that frame pump.

Hi, were do I find the "neck strap" you use to carry the reflex camera on your back while riding?

I see the appeal of Silva products, they’re clearly very high quality. But with an (indestructible) SKS trackpump going for €70, where does the prices come from? Are they made in Italy?

I have rolled the dice after the video of the unboxing of these wheels. I have been waiting for the review video for months now. I would like to chime in an say after 200 miles, I love my wheels. 50mm deep 21mm inner width, 36t ratchet hub, and more then 100g lighter than my 30mm deep 19mm inner width alloy wheels. My LBS wouldn't touch them, I was told the spokes were counterfeit but was not told how they knew, they did say after my first 40 miles that they were properly dished and true. If the $400USD is all I can afford and I want the ease of wide inner width and a ratchet hub what does the community recommend as a larger company to buy a similar wheel?

Love Jimmy channelling his inner Venjent at the end :D

auto mechanics aerosol brake cleaner is a much cheaper way to clean chains. it leaves no film so a denatured alcohol bath is not necessary. apply emulsified chain wax directly to the chain.

my experience with silca fiber foam is that it all clumps in a very short time, like less than a week. can you do a video testing and addressing this?

Loving all the videos people and am pleased to hear you have another sponsor, but please...Absolutely no need to spend £100+ on a frame fit pump while you can still get the Zefal HPX for under £30. Had mine for 40 years in all weathers without a hitch and it's all aluminium ✊.

Wow. Can’t believe somebody else bought some. I bought these over three years ago and have had zero issues. Seem to be plenty of good reviews on Ali express. At least there were when I got them.

Congrats to you and Silca!

It's quite possible that many off-brand products don't meet the quality control standards set by the major brands they're produced for. To avoid financial losses, manufacturers might opt to sell these products on the secondary market. It's a plausible explanation for the variance in quality between branded and off-brand items.

Im got a pair with new tech from them, 700$ but it at 1275 gram 24/24 hole 46mm height. It work very well, work for the money and still riding good after 2000 km with no issue .😊

as long as you don't apply too much pressure using a bike stand on a carbon top tube is no worse that lifting your bike up with your hand by the top tube.

Thanks Francis and Jimmi ...I have a bunch of Silca stuff..titanium bottle holder , bolts and a Tattico . The sealant is amazing , but do NOT get it on you ..or your bike frame . The wax works like magic , I wish they made medical grade !!

In my experience the biggest issue chinese brands have is consistency. Many brands only try to win over first time buyers with price, and they have very little (or no) QC, and also keep changing the product names and numbers every few weeks or months, so it's impossible to recommend, because by the time there is some experience with the quality of a product, it's off the shelves and there are news ones which are again of unknown quality. This is also not helped by the fact that their product descriptions are written like SEO-s, so it's nearly impossible to tell what specification they come with. I had years of experience running a local earphones community, and we barely had any chinese products as recommended, because they were so inconsistent. There are some reputable brands of course, but those tend to move towards localised reseller networks instead of selling on aliexpress.

Yay! Pump-Action Francis is back!

Lmao the glasses came in useful then

If ANY wheel of mine, whether steel, alloy, carbon or fairy dust, was exhibiting issues like that, I would stop riding it. Is Pierre brave or daft?

For balance, i have three Ryet carbon 3D printed saddles, and apart from them having a slightly wider nose than I'd like they've been faultless and super comfortable. Id definitely buy again.

@chris1275cc

7 ай бұрын

I've got two of those, great saddles, they do a couple of slimmer looking ones now too.

@2wheelsbest

7 ай бұрын

​@@chris1275ccI've got one that they class as an MTB saddle on my winter bike. It's a bit squishier than the short-nosed one they do but still comfy and after around 300mi no visible issues. Great value for the price as you know, as the finish is as good as any top end brand.

Low end manufacturing means Sub-contract so the wheel rim is non standard because of MULTIPLE contractors.

This one cracked just by fitting the tire. The replacement was fine, so I'm happy with it, but I wish they would have checked it properly...

How do you all feel about the Ryet hubs? I used them to build my wheels and haven't had any issues

@alexdiaz2812

7 ай бұрын

I agree with you, I have some ryet wheels, and I have ridden many kilometers without problems. They even survived a crash without problems, (I sent them to be checked), I think it was a production fault, but in my case in mountain and aero road works perfectly

Which wheels from ryet are thoose exactly? I also ordered some carbon gravel wheels from the same company. They are called „2024 Carbon RYET GRAVEL Wheelset Disc Brake Tubeless Ready 700C Bike Wheels Center-Lock“. By the time i bought them (11.11. 23) they were called 2022 carbon ryet gravel etc.

@alexdiaz2812

7 ай бұрын

I have the 55 mm aero for disc brakes and also the mtb ones, I have ridden them both very hard and many km without problems, I think this person has some with production defects

Ive got Roval CLX like that. It is just the fearing. Not the rim itself.

I assume the sealant isn't dangerous when it sprays into someone's eyes, mouth behind you when you get a hole and it sprays a bit.

Bit of a random Q - but what Folding Knife do you guys use for the Unboxing? I’m after a new one and I’m sure I saw a flash of one you guys used one Video..

Mailbox Monday on a Sunday. Thanks for releasing the PSA early

Ryet doesn't show in their listings as I live in Australia . They probably cannot ship to me . The building quality has a lot to do with how they are assembled and calibrated . I have seen trouble with Syncros , Rolf and Roval wheels ( poor assembly ) .

@michaelcheng6469

7 ай бұрын

It's all over AliExpress.

Gone are the 3-D printed tools, most of the clothes are sold out, they staying in business? Curious where the very cool T-Handle folio is made- no mention anywhere.