Check out the new 3D Channel: youtube.com/@Just_Print

@linearburn8838

10 ай бұрын

you skiped over the most important feature .... the web interface

@aware901

6 ай бұрын

I have the Neptune 4 and I can’t print the tool holder? What am I doing wrong

So far this has been the most useful video on N4 on KZread.

@Samuel-ef4fn

Жыл бұрын

There is another extremely good one but its german only sadly.

@jstro-hobbytech

Жыл бұрын

I like vlad but he's so busy he must do a review a day haha.

@jstro-hobbytech

Жыл бұрын

Nathan builds robots has one coming up

Man, this video has been such a life-saver. One thing of note: The "freebie SD card" is included because you need it to update the display. You can update the printer through USB but the connected display actually needs to be taken apart and has a little SD reader inside.

Now this is a review! For days I was just looking at reviews and found that people are just making short meaningless videos about there favourite or least favourite 3D printers. And now finally I found the guy who makes an informative, long and very detailed review about this 3D printer. Thank you my G!

Just got the Neptune 4 Max, my first FDM printer (previously been using only resin) and this video became my lifeline. My very first print came out pretty darn good! Thank you for this well done format, it kept me calm during a first timers build, setup and first print launch.

I just got my new Neptune 4 yesterday. So impressed with it. Super fast and good quality.

I was searching for a new printer because mine is very old and I think I found the one thanks to you !! So Thank you very much and continue your amazing work !

I've had this printer for almost a month and I think it's really good for all beginners. Considering its price, it's a really good printer and easy to use. Thank you!

This is probably the best video I have seen to date. very thorough on everything, great explanations and presentation. Immediate like and subscribe!

I got this from someone who said, "It never worked." I plugged it in, and the switch lit up, but the power didn't work. Until I got to 21:28 of your video! 115V had to be switched on instead of 230V! Thanks a ton!

I got my son this printer for Christmas, and I was gonna spend this weekend getting it calibrated and set up, but you made it too easy. Thanks brother

This was an awesome review of the new Neptune 4! The prints are impressive! Especially the Deadpool bust!

Awesome review - thanks for taking the time to post this

thanks for this, just ordered it and its helpful to have this as a preview! Keep up the amazing content

thank you for taking the time to make this video. It really helped me a lot setting my new Neptune 4. I'm new to 3D Printing.Greetings from Puerto Rico.

Thank you for this video. I own a different brand of printer (a very similar I3 klipper) and you provided a very coherent explanation of belt tensioning and roller adjustment. Very useful. Try the 18 minute benchy file from the USB. I had a similar improbable fast benchy file on mine, and it turned out surprisingly high quality.

@JustVlads Oh my god, you've made this product so ACCESSIBLE to my brain! Thank you for this in-depth review!

I've had my Neptune 3 pro for about 2 months and I just got the Neptune 4, holy hell this thing lays down plastic extremely fast. Haven't had it an hour yet and I'm completely satisfied with my purchase. Got it brand new for $230 cash on offer up. What a score!!

@anthonylong5870

8 ай бұрын

Hey dude, Which is the easiest and less issue prone? I am going to be buying either a Neptune 3 Pro or a Neptune 4 and I cant find any direct comparisons to help me. This will be my first 3D printer and I have no idea what to get

@millipede070707

8 ай бұрын

@@anthonylong5870 they are the same machine but the 4 has a few more options and prints approximately 3.5 times faster. Get the 4 and you might as well go with the Max or you'll regret it. Neptune 4 max all day

Already 15 minutes into the video..and it looks like a tutorial! 👍👍👍👍

Excellent video, thanks! Can't wait to get mine.

Great video! I purchased my Neptune 4 last night as my first 3d printer and wanted to look up videos while waiting for it to arrive. This makes me think I bought a good one as everything was explained so nicely. I'm sure I'll be back in a few days to rewatch some parts when the laser comes in!

@NastadonGaming

8 ай бұрын

I had some issues with my first Benchy, but I realized my Z axis didn't save. So I checked again and I've had no issues. Already printed a lot on this machine and I am loving it!

@gehillz4075

8 ай бұрын

@@NastadonGaming Glad to hear it's going well for you! Would you recommend it for a beginners first 3D printer?

@NastadonGaming

7 ай бұрын

@@gehillz4075 100%. Very easy to use overall and the prints are great quality. The hardest part honestly is learning the slicer program IMO, I tried my first print with Supports and it was a pain to get those off. So for now I like my Print-In-Place pieces that don't need supports until I can get those settings tuned in.

@itzjoe2714

7 ай бұрын

just done the same thing aha, brought last night, excited waiting for it, looking up videos

@gehillz4075

7 ай бұрын

@@itzjoe2714 I took the plunge maybe 2 week ago, loving every second! Setup is so quick and fast. Auto bed levelling is just a dream and effortless. The prints themselves are really good quality! I'm sure you'll be happy mate. I sure am.

Amazing video! I pre-order the 4pro.... Just have to wait for it... August, they say for Canada. It'll be my first printer!

My first print ever (budda) is 17% done. I'm wicked excited.

Thank you, this is the best setup video I seen to help me setup.

Excellent video. Very helpful. Thank you!

Nice review. Hopefully they make a max version.

Klipper is awesome and Elegoo got a lot right with the Neptune 4. I'm looking forward to a Neptune 4 Pro, but in a 300 mm Plus size. I wish Elegoo included WiFi so it's easy to use with Klipper. Who uses a wired LAN connection these days? It also needs an all metal hot end.

I finally got mine that I ordered early July! Mine did come with manual though. It's the same thing you found just printed out, thought I'd share!

@GSpacmanvice

9 ай бұрын

Actually change that, mine didn't come with the head part attached, I had to attach it myself.

I should buy my first 3D printer, and I'm undecided between the Elegoo Neptune 4 and the 4 PRO version. What advantage do the metal guides and rollers of the 4 PRO version provide? Do the plastic ones in the 4 version tend to wear out? If they tend to wear out after many prints, are there any replacement parts available? Is it worth spending a bit more to have only the heated bed with zone heating and the metal guides and rollers?

Best 3D printer reviewer on KZread... hands down. I wish one of my two printer would just die so I could get this baby... oh well.

Cant wait to put my hands on one of these

@itzmemaariocleantaps8201

Жыл бұрын

what's stopping you?

@ddx5769

Жыл бұрын

@@itzmemaariocleantaps8201 he broke

@phillybruhhh7344

Жыл бұрын

​@@itzmemaariocleantaps8201waiting on shipping july

For what it's worth...I got my Neptune 4 non-Pro yesterday, and I genuinely can't understand why anybody would buy anything else. I've been printing at 280mm/s 0.12mm-0.2mm layer height, and with plain black PLA there's no noticeable ringing or over-/under-extrusion. With silk PLA, a small amount of ringing is apparent, but nothing like I'd see on the Neptune 3 at 80mm/s. Also...be brave and make yourself a Prusaslicer profile from the printer specs; it's so much better than Elegoo's Cura 4.8 there's no competition.

@amicbail2333

Жыл бұрын

Hey! I've been looking for this for ages. I'm trying to create a Prusaslicer profile myself, but I'm coming from Resin printing so a little lost. Do you have your settings for it please? mainly the 'Speed for print moves' as i think that's the most important right?

No that it is really needed, but can you connect this Klipper printer to a Pad7 or Sonic Pad and keep the existing firmware?

For my printer I have the EZABL sensor and Th3D offers solid ABS standoffs to replace the springs. Never again do I have to manually level my bed.

awesome video thanks ! and quick question, do i have to do the whole leveling and auto bed leveling process between each print ? no matter the time the print took or the time between each ?

Looking for my first FDM printer and this sold me

Have you tried printing using LAN with the Ethernet cable? If so what is the prosses? I saw there was a part for it in the instructions but could not see it in your video. If you could tell me about that I would be grateful. Thank you.

Thanks man!!!

I know this may be a stupid question, but how do you turn of your Neptune 4 printer? Im making this question becouse i cut the power by turning of the switch on the power font, but by doing that the screen start to flicking and get some restart options just secounds of turning off.

I’m looking into getting my first 3D printer, and I’m thinking of getting the Neptune 4 to get my feet wet. The 4 Max is tempting, but that may be a bit too daunting for a newb like myself 😅 Thanks for this awesome video!

Some questions: 1) What material is the heatbreak made of? Steel with tube? Steel? Titan? Bimetal? 2) What kind of heatbreak is used? CR10? Chemera? Kraken? V6? Proprietary? 3) What type of heatblock is used? CR10? Proprietary? 4) What type of nozzle is used? Mk8? V6? Proprietary? Are there abrasive-resistant options on the market? 5) What size of blower fans is used in the printhead to cool the model? 4010? 4020? Something else? 6) Does the back array of fans blows across the whole plate (which is 235 mm)? Or just across the specified 225mm?

a great video, new subscriber

Have you played with flexible filament on this printer and if so what is it like ?

So helpful😊❤

having a problem where the left side of my prints are rough and the right side is perfect on a flat item. ive leveled it multiple times same issue. Left side of the print is like more pushed in giving it an un even bottom how can i fix it

Do you lose the more advanced features of Klipper such as the ability to connect via web UI?

Would have been interesting to know how long the test prints at the end took, Im really interested in how long the Deadpool Bust took 😊😊

Sovol SV07 or Neptune 4? Which would YOU select? Thanks very much.

So I’m like dumb and getting into 3D printing. I watched a couple videos on this printer and if I remember correctly, they said that it had to be connected through the Ethernet cable, is this true? cause I didn’t see you hook it up, so do you not need it to print things? Sorry if this is a stupid question😅

RIP Prusa, again

@pcmrbenchmark8301

Жыл бұрын

What happened to Prusa?

@tophatv2902

Жыл бұрын

@@pcmrbenchmark8301 800$ vs 300$ 500$ cheaper yet not bad for 3d printer and getting really close to prusa for the a cheap price.

@norbertlukacs3661

Жыл бұрын

Lol no. You can also travel with a Dacia but most of the people still prefer Mercedes

@Komandie

Жыл бұрын

@@norbertlukacs3661 What makes Prusa printers better?

@norbertlukacs3661

Жыл бұрын

@@Komandie open source but self developed slicer, reliability, amazing customer service, upgradeability (if you bought an mk2 ~8 years ago you was able to upgrade it year to year, and now you might have an mk4 and a lot of spare parts, or even complete machines just with the upgrade kits), regular software updates. Prusa has its own model database (printables), has its own material brand (prusament), and everything is open source. Therefore it's a bit pricey,but the development is in the European union and the manufacturing too. Not in China, with slaves and child workers

thanks for review. on elegoo website they say benche takes 18 min... something with your settings?! or they lieing?

The prints look fantastic for its insane speed! What slicer did you use?

@pandaplayfn1172

Жыл бұрын

He use “Elgoo cura”

Hey Man, im new to this hobby, very enlightening videos, how often do you suggested bed levering?

Hello, excellent video, I want to buy my first 3D printer and I am undecided, where I live I have 2 options, the Artillery Genius Pro and the Neptune 4, which one would you recommend?

Ok, so just ordered one based on this review. I've only had resin printers before. I will use this for wargame screnery mostly.

Ciao! Model/ brand of filament? Necessary pla-hs or the normal one is ok?

Does it come with an Accelerometer to do Input shaping ? TYIA

Hola compre una de estas y la use unos días y ahora cuando le meto el usb se me apaga la maquina y no puedo encenderla si lo saco se vuelve a encender y tampoco lee la tarjeta micro sd

How long does it take to fully assemble and set up?

Thanks for your incredible videos and awesome printing ideas. Thanks to you, I dump my Fokoos ODNIN 5 (BLAH) for the Neptune 4. Out of the box, this works! It's like an Apple product, just works. 😎 I have the most successful prints I have ever had, such a fun hobby.

Do You gave any issue with ringing or wobbling. I can't fix it

why you got 36 points? im runnin on 128. probably because this was early access and the firmware wasn't updated to use the 128 point sytem

Its a nice printer, but i dont understand why they made that fan group behind the x axis. I mean with one of this fans from behind, connected to the x carriage they would get nearly the same effect.

@Crisot.

11 ай бұрын

This will add weight to the X carriage and may affect ghosting... This fan group only add weight on the z axis.

Nice videonice video, may i ask what are the spare nozzle diameters that come with the printer

@JustVlads

Жыл бұрын

They are not labeled but appear to be 0.4mm

What do you suggest to someone who prints architectural models?

How much speed can you get out of it without using a Klipper?

I'm having major issues with my Neptune 4 Pro and at this point don't have a single clue how to fix them, I keep getting error messages after every print and just now am getting a file error issue leaving me unable to even use the printer. Anyone else having these issues/know a fix?

How is that only 36 points when it’s supposed to be 121 for bed leveling ?

Please, what is the source of the weird white machine? It's my kind of thing.

Which is better Neptune 4 or ender 3 s1 pro?

8:43 My brain refuses to remain calm seeing that cable connected backwards. x)

Can you replace that wild bar with noctuas? Also, you kust have a million samples like that haha. I don't like how it's a proprietary nozzle as I've ordered one and cleaning nozzles is stanky.

Do you use adhesive or something

This is one of the better reviews regarding this printer. I’m going to check this printer out this week, but I’m worried about the noise. When I watch the vid it comes up as very loud, but that could be due to the mike placement? Is it doable to run the printer and be able to sleep next room? 😅

@Adaks

10 ай бұрын

It's because of the large fans at the back, you can disable them.

@qstick5554

10 ай бұрын

@@Adaks thanks. But is it still save to keep printing them? Or is there a huge chance to overheat ? I’m totally new to 3D printing that’s why all the questions.

@Adaks

10 ай бұрын

@@qstick5554 I don't know too but I think that the fans could be unnecessary as when you look at other 3d printers that are bed slingers with fast speeds - they don't have additional fans attached it. But anyways, it is a machine so I would always expect it to be noisy, most people don't put 3d printers in their bedroom, they have a spare room to put it in.

@Adaks

10 ай бұрын

@@qstick5554 you can also always run tests on print quality as you adjust fan intensity

@qstick5554

10 ай бұрын

@@Adaks ya it’s going to be in a spare room but it’s mostly how much noice it’s going to be 😁

Just bought mine on amazon didn’t come with some of the tools you have.. such as the clippers and scraper not a deal breaker though..

Thanks for you review. I guess this printer is really nice and cheap for a beginner. But my favorite is still a generic E3. You will be better in printing if you understand how it works as they say (and recommend Prusa constructor) = )

How do you connect to the wifi?

I have yet to see anyone print in petg with klipper. It's almost like they're all afraid of it or something.

Once the Neptune 4 max comes out, im selling my 3 plus

My next printer ... maybe ... number 10 FDM 😂

"With 'create the future' warning" :D Will the N4 Pro be next?

@radesigns001

11 ай бұрын

It comes out in August, the N4 I ordered should be here this month

Prusa is irrelevant aside from major print farms for some reason when you can get a P1P for half the price, and double the speed and can be controlled from your phone/computet.

Tool holder-v2 stl pleas

Was ich mir noch wünsche, ist die Möglichkeit zur Steuerung über das Handy. Siehe ein Video was derzeit mit der Möglichkeit, den Druck zu stoppen, geschieht. SOGAR wenn ich mich nicht im selben WiFi-Netzwerk befinde. Also, wenn ich Lebensmittel einkaufen gehe (zum Beispiel). Dies ist wichtig für größere Drucke, die sehr lange dauern und es eher schwer ist die ganze Zeit persönlich dem Druck zuzuschauen.

I think it's time to say bye to my Ender 3 Pro... Good printer but this one's just BETTER

i watch 50 review video's end i read allot. end stil i dont know what 3D machine i must buy. elego neptune 4 or ender 3 s1 pro (beginner) as i read revieuws. evry machine you wil find problems end try to understand the machine? end fix it?

@omegadeepblue1407

Жыл бұрын

Yes, even the powerhouses lile the Bambu X1C have their issues. BUT you need to know how problematic is the printer, the Ender 3 is very popular and won it's fame as the ultimate beginner printer because is from a time when 3D printing was HARD, the Ender 3 was like the less frustrating and problematic printer of that time and for that reason it got it's fame. On this new decade we can see that new contenders appeared on the beginner section, and some of them are less problematic and friendly than the Ender 3 like the Neptune series of Elegoo.

@petercallison5765

Жыл бұрын

He hasn't shown the full potential of the printer, you really want to see it with nylon for a start. For the price the Neptune 4 seems the best choice for most people.

@itzmemaariocleantaps8201

Жыл бұрын

so neptune 4 or Creality Ender 3 S1 PRO

@omegadeepblue1407

Жыл бұрын

@@itzmemaariocleantaps8201 Neptune 4, Ender 3 s1 pro is beginner friendly to the standards of 2016.

@Ben-fk9ey

Жыл бұрын

Go for the Neptune 4.

I'm not sure I'm the only one, but I'm a developer and I'd never plug a USB Stick that came in a package like that on my main computer. I'd probly use a temporary offline machine to clear it out first.

How well does it print with PETG?

@shadedisplayed

10 ай бұрын

Probably very well. PETG is easy to print so

@chronomize

10 ай бұрын

@@shadedisplayed yeah I actually got an ELEGOO Neptune 4 since I commented and have started printing a set of Halo armour in PETG. Beautiful

Tools stl pleas

33:05 for slicer setup

Will you review the Neptune 4 pro too?

@JustVlads

Жыл бұрын

Yes, eventually..

my 3d printer does not detect the included usb drive

@meowdred2017

14 күн бұрын

it shows up on the web ui but not on the screen

@GilDArk-tf2zz

10 күн бұрын

Try to format the usb drive

hi

It still has bed leveling knobs. No thanks.

The fact you cant connect to it and print directly though you pc Via USB Cable says no thanks...

tbh for a 35m benchy it looks bad my new anycubic kobra 2 max prints a way better looking benchy in 17m. to my opinion it dos not look good

its crazy how all you "influencers""reviewers" get free stuff and those of us who preordered and paid for it full price sit here and wait months. must be nice.

@TPCDAZ

Жыл бұрын

They are test machines. Often they come with not all features, bugs, glitches, issues. Would you like Elegoo to send you a machine that isn't ready for public release?, also the very reason you even purchased one of these machines in the first place is because influencers HAVE INFLUENCED YOU. So stop moaning. It's called a pre-order for a reason. YOU NEED TO WAIT FOR IT.

@edenassos

10 ай бұрын

Blame yourself for having no influence in life.

Ktrobbout

C'mon! Klipper is NOT a new OS, it's a FIRMWARE which role is to improve interaction between your 3D printer hardware and software! And it's not that new as well! It's true that only some manufacturers implement Klipper for their hardware. It's a software investment that could add costs to items. Historical background of trends is interesting at least in order to avoid intro like yours. NOT AN OS and NOT NEW! How could you have 28K viewers in 1 month when way more serious reviewers just got 5K? all the mystery of laziness that drives some people when looking for decent reviews. They just take the first one youtube proposes.

Skipped mad steps

@TheNeonClucker

3 ай бұрын

Elaborate please?