Thanks for the effort to create this content and make it very understandable 👍 just did this mod without removing the intake collector - only took the air filter housing off and its really a 30 minute job. Will test the car tomorrow and hopefully this mod will make the car feel more responsive below 2000 rpm

@2rmmotorsport

9 ай бұрын

No problem 👍

Really helpful video! Thanks

Just to say I've been driving with mine unplugged for about 2 weeks. Have yet to have any check engine lights. Mine was clocked poorly so I returned it to normal. It then wouldn't rev above 1500rpm with it plugged in. Unplugged and it works fine. Have left it alone since 😅

@fperkins581

Жыл бұрын

Earlier models won’t throw a light, mines been unplugged about a year now.

@blackmothcustoms

Жыл бұрын

@@fperkins581 still has fault lights ?

@fperkins581

Жыл бұрын

@@blackmothcustoms no earlier models won’t show fault light. Mines an 05, I’m not sure what year they started showing a light.

Great video. Very informative

Thanks, great video. I've just done the 180 mod in less than 10 mins following this. I always look to blank the EGR on a diesel if I can and the state of them when I do shows that its worth doing.

@2rmmotorsport

10 ай бұрын

Glad it helped 👍

thank you for your video, I thought a simple plate was enough ^^

whether turning the egr 180 is a good way everything works fine. I do not have access to such a plug.

great video, is this the sam egr valve as on the 1.9 96kw engines?

I did this the other day. My EGR was riveted together though so could just pull apart had to grind it apart.

Is there any faults coming up after it being blocked and disconnected ? Does it need mapping out ?

Is there any risk of too lean burning and destroy the pistons or injectors? is there a lambda probe on this trafic 1.9 to measure or is it just desided by the computer how much fuel he enters? how many miles /km did you drive without EGR already?

@simoncox6184

5 ай бұрын

It'll never run lean it an injection engine

is it easy enough getting the intake off and back on? and will i need a new gasket for the intake? ive not done anything like this and my egr is stuck in and broken and vans due its MOT soon.

@2rmmotorsport

2 жыл бұрын

removing the intake manifold is a pain in the a••. If your EGR is stuck you can remove the intercooler pipe on the right hand side of the intake and use a pry bar to push the EGR out

@xchiefxx

2 жыл бұрын

@@2rmmotorsport thanks I'll give that ago.

very helpfull i was having problem with my renault traffic van lack of power with glow plug light coming on and off so now blocked the EGR valve just the way you showed now my van drives better with the blocked EGR valve but will it have any long term issue after blanking the EGR valve please advice

@2rmmotorsport

2 жыл бұрын

There's no downside to blanking off the EGR, it's only good news!

@tomsmelderis

2 жыл бұрын

@@2rmmotorsport apart from higher nox concentration and engine running hotter, as combustion is better due to more oxigen entering the chamber

@ssdivizion

2 жыл бұрын

@@2rmmotorsport Some people claim that after the blockage of the EGR valve, the temperature in the machine, more precisely in the turbo, will increase and this will negatively affect the plastic and rubber parts that can melt or be damaged, is this true? Thanks in advance for the reply

@2rmmotorsport

2 жыл бұрын

@@ssdivizion I'd love to see some academic research of that! Always happy to learn :)

@themagpie_1

Жыл бұрын

@@ssdivizion hotter..? not sure how as the air/gases your blocking off are the hot ones..if anything, the turbo should be cooler..?

Bonjour ! Cela fonctionne sur Renault Kangoo DCI ? Merci je pense que je vais essayer

@2rmmotorsport

Жыл бұрын

yes!

Will this help with the black smoke coming out of exhaust please

@2rmmotorsport

Жыл бұрын

No, black smoke is caused by over fuelling

Any news when these will be available?

@2rmmotorsport

2 жыл бұрын

dunno, nothing to do with me.

Does it need mapped out after this is installed ?

@antoniosever5535

Жыл бұрын

No if stay egr connect in conector.. if you wants completely out all you need doit remap ecu...egr off ,not problem for doit very simple

I span my egr and left the solenoid connected but sadly kept getting a fault code of p0400

@homer1033

5 ай бұрын

check you air mass sensor

What difference does blanking off the ear valve make ?

@2rmmotorsport

2 жыл бұрын

Stops the both the valve and intake manifold gunking up amongst other benefits. Loads of improvements in performance too.

@EcabreraEnni

2 жыл бұрын

Tengo un problema me marca los precalentadores, y pierde fuerza o potencia, Le limpian la valvula y funciona bien pero vuelve a las mismas. Me dicen que es el multiple de admisión, el escaneo detecta precalentadores, y entrada de aire. Me podrás ayudar con tu comentarios?

@ranat5526

Жыл бұрын

@@2rmmotorsport If you use oven cleaner you will never need to to remove the egr.

Lo comenta en inglés pero con las imágenes se entiende

just remove and clean once a yr. it is there for a resaon..

eBay are no longer selling this blanking plate.

@thejakeanade1601

2 жыл бұрын

Damn was planning on doing it anywhere else they sell em?

@mavericmorph5358

2 жыл бұрын

@@thejakeanade1601 Apparently the supplier is getting more in stock soon.. phew

@thejakeanade1601

2 жыл бұрын

@@mavericmorph5358 good to know will it be back On ebay mate

Opel corsa c 1.7 dti should i delete the egr well it be ok?

MAP sensor will detect that something is happening and ECU will throw engine failure light

@kevinwilding7825

Жыл бұрын

Well it hasn't done so with mine, plus it's cured the lumpy tickover it occasionally had.

6 mm bolts

@2rmmotorsport

4 ай бұрын

Yes, my mistake, M6x1 with a 10mm head

Greta Thunberg ?

Best way is not bother doing it at all. Its there to save the environment by reducing the engine temp so no harmful emissions are pumped out the back.

@lazyboy100183

Жыл бұрын

Arse ole