i did buy the p-51d and i gave in and got an NX8. Your videos are friggin amazing and have tought me so much ty ty ty

You are so lucky Brian ! LOL Cheers from Canada - Love your channel - you keep it light and informative - I learn so much from you each time ! Thank you 👍

Brian- just ordered this and the eflite corsair through your youtube site. Been watching you for quite some time. Thank you for the extra effort you go through for your channel!

@BrianPhillipsRC

Жыл бұрын

Thanks Jeff! Glad you're getting some value out of it, and you will LOVE these planes! Watch the P-Factor...it'll sneak up on you!!!!!!!!

You have a great wife there to have your stuff all over her kitchen! Thank you for the video . I ordered my P51 the other day and sure excited to get it !! .I enjoy your videos thank you for the helpful tips!

@BrianPhillipsRC

Жыл бұрын

Thanks Mark, and I sure do!!!! She's amazing, and I'm so blessed to have her in my life ;) As for the P-51 - amazing plane, you'll LOVE it!

@neogamer210

5 ай бұрын

@@BrianPhillipsRC I have a question before I buy the p51, Can I use a 3S too (without underpowering it)?

I really want this same plane I looked at the rerelease and it was approved on my birthday. Also love y’alls jokes that get thrown in.

I appreciated that you went a little more in depth on radio setup this time tbh...I'm starting to play with mixing now so thanks for the little tease on that lol! Shutting off the annoying battery warning made up for it 😁

Brian it’s much easier to pull plane out of the box if you open both sides . The vacuum won’t hold it from sliding out. It will slide out like butter. Awesome looking bird. Might have to get me one some day. 😊.

I can't remember the Ace's name, but he named all his planes that and was in several theaters of war.

I would do anything just to get that plane. I freaking love that plane I have the June ninth P 51 but I really want the blue nose!!!!!!!😍😍😍😍😍

Brian, first, let me say I find your help videos some of the best I've ever seen. You have a unique way of incorporating important additional information as part of your presentation. A good example is now you can slow down the Utube voice speed via the settings (I never knew that!). I am setting up my second Eflite airplane (I'm an old builder of RC models that at age 75 have decided to buy them assembled these days!) I've been following this P51 assembly and my question has to do with Thrust Reverse. Since I'm using an NX6 transmitter and only have Aux 2 reserved for AS3X/Safe I must move to an 8 channel transmitter to enable Thrust Reversing. Is that correct? Again, great video's which are greatly appreciated!

George Preddy is ace who named his planes Cripes... Shot down by friendly fire. Should've been Yikes So Mighty!

Love Your work BP. The Maiden show was da Sheeeeeeeeeee already! Only You Mate.

Beautiful P-51 and amazing video as always! Sorta got my curiosity up keeping the screen outta camera view till you got the New Model popped up, "Think it's gonna be released" ...... Hummmmmmmm.... 🤫🧐🤔

Figures...I finally found all the parts I needed to repair my June nite. It's all the same except for the livery and now it comes with an AVIAN ESC, so Hello Reverse thrust.

ordered using your link thanks for the makin the setup easy. I was wondering how far back or forward you place the battery to get the cg right

I thank you and the camera crew for your super video as usually. And I think that you should say yes to a ix 14. But it’s the difference big comparing nx 10 . You have to think about the people that are new to this hobby, and learn from you setup . Because and don’t think you gone get a new to this hobby by a ix 14 . Thanks again. Martin

thats what cats do, I didnt find anything annoying didnt even notice .

My box should arrive on Tuesday 🤓 Just to find somewhere to fly it now !

@BrianPhillipsRC

Жыл бұрын

AWESOME! Go for it!!!

@chrisrtill

6 ай бұрын

@@BrianPhillipsRC FINALLY flew it yesterday, was very odd doesn't look bent but had to ride left aileron way too much to keep it flying. Wondering if I had CoG miles out so I'm re-watching your vid : )

Glad I came across this channel I've never flown planes before only drones would this be easy for a beginner to start off with to learn how to fly? Cheers

@BrianPhillipsRC

Жыл бұрын

You COULD, but it's not as easy as some other choices. This would make a better 3rd or 4th plane, in my experience, which was similar for me, but this has SAFE (Auto-Leveling) in addition to (AS3X) stabilization, so you'll have an easier time than I did when I first got my Blondie (3 liveries ago, and only had Stabilization at the time, no auto-leveling). That all being said, if you already fly drones, you'll have some of the "Basics" down...just you have to KEEP flying forward with a plane, which can be a HUGE change for drone pilots. This is kind of our copy and paste "beginner list", but might help you put your finger on your own pulse, and see where you land (yes, pun intended - lots of "Dad jokes" around here, please forgive me)... OR, you can just jump in with two feet, if budget, and skill won't be a huge issue for you... bprc.me/P51 - You want the 1.2m - NOT the 1.5m - the bigger is a LOT harder to fly, which is somewhat counter-intuitive in the fixed wing world... bprc.me/Tx - I suggest the NX10 for a semi-experienced flier who THINKS they will stick with it for a while...then you're not chasing good money after bad to buy the "entry level" stuff that you have to upgrade for your 3rd or 4th plane (this is super annoying, and expensive, of course). 2200 bit.ly/3aUgpo8 - you can use 3S or 4S, but if you're like me, you'll defer to the larger pack. you can also use a bigger capacity pack, if you wish, but these 2200mah 4s 30c packs will serve you well....but you might already have some from your drones, if you're dealing with 2200 or similar size packs. Shoot for 4S for best results. S2200 bit.ly/3b2wp7y - This charger will get you where you need to be up to 6S, and you'll LOVE how easy it is to use. Beginner list Description | Purchase | Videos Habu STS 70mm RTF | bit.ly/3ci5eWD | bit.ly/3ontBF9 Apprentice 1.5m RTF | bit.ly/3BlSjh9 | bit.ly/3b6kCVP Carbon Cub S2 1.3m RTF | bit.ly/3PqNR4A | bit.ly/3J6WmQ3 T-28 Trojan 1.1m | bit.ly/3PmbxHf | bit.ly/3v8zGJi Apprentice 1.2m RTF | bit.ly/3BlSjh9 | bit.ly/3Bk60wG Sport Cub S2 UMX | bit.ly/3yYkrUs | bit.ly/3PL8vfJ AeroScout 1.1m | bit.ly/3OlqyYQ | bit.ly/3ztp9Li Trekker 1.2 RTF | bit.ly/34jhgLZ | PNP bit.ly/35xOPu8 | bit.ly/3PHoZ8M Bigfoot 1.3m RTF | bit.ly/30mYdOq | bit.ly/3zqIxZu Pioneer 620mm RTF | bit.ly/2YotgbY | bit.ly/3OvJLad Prodigy 1.4m RTF | bit.ly/37zJxzt | bit.ly/3cvccaZ Ranger 1.2m RTF | bit.ly/3bHFIKr | bit.ly/3bCezZB RC Simulator bit.ly/3aWiW19 | bit.ly/3h9StjB USB Simulator Interface Wireless DSMX Dongle bit.ly/3ztFZK8 | bit.ly/3h9StjB

@boomsjapan

Жыл бұрын

@BrianPhillipsRC Thanks so much for the reply. I appreciate it ..I'll have a look thru the list you sent and work out which one would suit me best to start with 👌.If you ever want to head to Japan and fly, let us know more than happy to help out .. Cheers again mate ..

good catch camera crew…distorted batt tray due to over tightening straps causing binding.

My next plane 100% But as controllers go I'm not sure I would ever give up my TX16xmkII

@BrianPhillipsRC

Жыл бұрын

I've heard good things, but haven't used one, so I can't say. My only expereince with OpenTX was with the T8SG, so a far cry from the TX16.

I have a question. What's the difference in binding with safe select enabled vs not enabled. Just asking because I see you binded it witout safe select but in the programing of the switch for as3x, off, safe it seems like safe select was working

@BrianPhillipsRC

Жыл бұрын

I don't even know if you can do it that way anymore. GREAT QUESTION THOUGH! The manual seems to claim we can use bind plug to do the "OLD METHOD" but I just use FORWARD PROGRAMMING all the time now. I apologize for not knowing the answer to this, in whole, but I suggest you just bind it normal, then use FORWARD PROGRAMMING to turn on SAFE, if you wish to assign it to a switch.

@thomasgallien4371

Жыл бұрын

@@BrianPhillipsRC no problem! Your videos have helped me so much and I appreciate it. You and camera crew are doing a fantastic job with the videos !

This Is my 1st BNF Model and watching you set this up seems like a lot of work for me being a noob. My Q: Are there profiles all ready set up I can use for this plane?

Question if you have time. I have a grass field only. Had issues getting this plane to take off. It kept dipping the nose into the ground as I tried to take off. I have many other planes (commander, ultimate 3d and a bunch of umx) that have no issues on this run way. Any suggestions on why the p-51 is so nose heavy to take off. I even moved the battery further back then it should be with no better results.

@BrianPhillipsRC

Жыл бұрын

It is tricky. Try holding the tail, and pushing it a bit to help it get rolling, if you're okay with such a thing... the other option, that DOES work, is to bring a large bed sheet, or similar, and stretch it over a short section of the grass, and staple it down. This will give you a STARTING PAD. Might be enough help to fix your issue. You can also buy WEED BARRIER and just roll it out, then staple it down, same thing. The "real" fields use Geo textile fabric, if you're curious, but you may already be aware...it's real pricey!!!

@jimnardone32

Жыл бұрын

@@BrianPhillipsRC Thank you Brian, I've Been know to hold a tail or two so with that experience we will see. I will keep you posted on my success. Grateful for the tips.

the way the prop is pointed down and to the side on RC stuff, I was wondering is that the same on full scale ?

What size are the screw for the horizontal elevator??

@BrianPhillipsRC

Жыл бұрын

I wish I could tell you. Very sorry, but don't know.

I purchased this plane and love it! I noticed I’m getting total voltage telemetry for the pack on non-smart batteries too! I looked for an update for my other ar631’s. Is this a version 2 or something? I don’t see updates for my older 631’s that include this feature. Just hoping to pick your brain. Thanks!

@BrianPhillipsRC

Жыл бұрын

You will get NOMINAL VOLTAGE, just not cell per cell - and then it does the math for an estimate too in the Telemetry screens.

My p51 is brand new the motor surges after about 1:00 to 1:30 of run time do you know what that could be?

@BrianPhillipsRC

Жыл бұрын

WOW! Battery is bad, not fully charged, or you're in the throttle 100% for the duration of that flight. 1) Try another battery FIRST, if you can. 2) If that doesn't work - make sure the battery charger is good - seriously, this could be hiding in plane sight 3) Next, check your ESC settings for LVC. You can do this in your Tx similar to how we setup REVERSE THRUST...only you're looking for another value. If it's too HIGH, you could lower this setting, but I don't think you should NEED to do this. I bet your battery is kaput. Good luck, and hope it's simple!!!

The livery is an actual war plane his confirmed plane take downs on the side the white marks on the blue I think his name is also on the plane by the cockpit

Hello Brian. Which one do you like more, this on or Arrows 1100mm. Thank you!

Hey Sir, long-term viewing first time messaging.. love ya work & assistance but wanted to ask are your P51 landing flaps loud like mine, like the servos doesn't shut up.. & what are those reversed pliers to unclip the linkages? Much Respect & love from Perth Australia, West Coast Baby 😂

@bretttrindall4931

2 ай бұрын

Oh say, the Camera Crew is Awesome 👌

@BrianPhillipsRC

2 ай бұрын

If they're LOUD, check for binding. They get louder at the end of stoke (full landing flaps, OR fully retracted) but you still don't want to heat up that little tiny motor by over-driving them. If this happens, you can from OFF, idle the surface into it's position to squish the foam a bit (over-bend it into home or down position a BIT) OR trim the foam if you really want to get aggressive. Make sure the linkages are clear of the foam at full deflection too.

@BrianPhillipsRC

2 ай бұрын

Yeah, the camera crew is amazing!!! thanks

I just wanted to say thank you for helping me with the Carbon Cub S2 you video helped out tremendously. I just had a question to see if you could answer for me. I am a newer pilot and the High and low switch on the DXS what does it do?

brian im tore between this p51 or the xfly a-10 love them both would love your recommendation im in canada and horizon hobby does ship to canada love you guys you have taught me so much

@BrianPhillipsRC

Жыл бұрын

P-51 all day long. A-10 is amazing, but I haven't even flown the A-10. If you want an A-10, we've done a few, and the Eflite OR FMS options ARE AMAZING! (Can't speak to XFly just yet...but fixed gear...really????) XFly A10 bit.ly/3oUxF10 (this one is Twin 50mm) Eflite A10 bprc.me/a10 (this one is Twin 64mm) FMS A10 bprc.me/FMS_A10 (this one may be available in Canada soon, and it's HUUUUGE twin 70mm)

@rayemigh3776

Жыл бұрын

@@BrianPhillipsRC p-51d it is the xfly a-10 doesn't have flaps or even a rudder wth? guess its yank and bank on that one lol not really into it the a-10 from eflite is purrrrrrfect love it eflite ROCKS

Oh yeah!!!!!

will you to try the tx 16s radio

@BrianPhillipsRC

Жыл бұрын

Megan and I have been debating it for a few months now!!! IX14 vs NX10...we may end up with both so we can keep "training" people who need help with the NX, but I really want the extra channels of late - we've now run into 3-4 planes where we could have used the extra channels.

Nice flying as usual Brian, great film work too, also as usual. One comment on the plane: doesn't that prop look a little small to be scale?

@jonoedwards4195

Жыл бұрын

Kooks in the Lab find the perfect medium. Rip it off an use 12x12, sounds amazing and chunders the air We breathe. Vroooom Mate!

you mention the radios... I've yet to step up from my DX6i , and am debating the NX8... which planes have you used up all 8 channels?

I have the iX14 - it has already gone back to Horizon/Spektrum for issues with ghost screen movement and OS issues. I'd suggest that if most of your base is on NX Platform - stay with that. I am keeping my NX10 - until I get back to trusting the iX14. It is VERY different (Android OS) but much simpler to set up new models. My $.02. HNY!

Always been leary of those computer radios...I'm an electronics idiot! I've watched you set up that NX 8 so often...I now think I could pull it off! Much easier watching than trying to understand a manual! I only have a DX4e so I'm way overdue for an upgrade due to flaps and retracts. I can fly one without flaps. Problem I have is most likely never will have the money to invest in said upgrade due to bring retired and trying to survive on Soc. Sec. The hobby is becoming too expensive for me to continue. I do enjoy the learning though!

How much did it cost?? US and Canadian??

@BrianPhillipsRC

Жыл бұрын

There's links. I can't say how much it would go for in Canada. I know it's CRAZY up there from the conversion rate, and the VAT - gotta love "FREE" Healthcare ;) Horizon Hobby >>>>> bit.ly/3ohT4zT

Could a beginner fly this plane

@BrianPhillipsRC

Жыл бұрын

I had one WITHOUT SAFE and AS3X when I was on plane #3 (or 4????) ;) So, Yes, BUT I also did a LOT of crashing with mine to be fair ;)

Oh look, another Mustang. Cool paint though.

Ever try ELRS?

But my P 51 was on the wall and it fell because the cord broke holding it in so I need a new one but it’s like 300 and I don’t have that money 😞

Very sweet Brian. I love the P-51, but I'm curious, how you would stack this 1.2m up to the P-Eflight 51D Mustang 1.5m, obviously bigger, fly's bigger, but maybe the handling of the 1.2m is better?

@wernermoser3406

Жыл бұрын

Yes, ..... better.......better......better........better.......better.....!......!.......!.......😁😁

My tail wing spar did not go in easy. 😅

@BrianPhillipsRC

Жыл бұрын

At least you got it in ;)

@notoo7

Жыл бұрын

@@BrianPhillipsRC 🤣 drilled it. Added LEDs

what company do you work for to get free RC planes and stuff

What up😃😃😃😃🌞

anyone else yell at on screen Brian to take the box off the stove? 👀

@deandagner

Жыл бұрын

Nope lol that's where he puts it in EVERY unbox, build, radio setup video

@WSquared60

Жыл бұрын

@@deandagner I learned to filter it out long ago!

@myksanchez1222

Жыл бұрын

No...

@adamrodgers2377

Жыл бұрын

Never paid any mind to it

Wrong!!! There's a big difference between the Dx8 and the Dx10 even with the $40 battery.