Ebay Cast 1.8 Miata Turbo Manifold Review UPDATE! 🤑😬😳😁
Автокөліктер мен көлік құралдары
This is just a quick update video on putting an eBay tube manifold on my NA Miata. I have had great luck with it, its been on for two years and I haven't had any issues. I would recommend it for anyone who is looking for a good manifold on a budget. Mine didn't come with a heat shield, (this kit should come with one) I just never sent mine back because I just wanted to get it done.
First Ebay Cast 1.8 Miata Turbo Manifold: • Ebay cast 1.8 Miata tu...
Ebay Cast 1.8: www.ebay.com/itm/353239281376
Пікірлер: 20
Thanks for making this, i have a 1.8 as well and was heavily considering this only because all of the big boi brands are sold out for the next 6 months
@tdtgarage1697
2 жыл бұрын
Yeah for sure! Definitely pick one up to start your build. I honestly don’t see needing a different one unless You want built engine power.
Yo dude I have the same one, been running it fine for months now, but I wanted to switch over to an external wastegate, I know you said you’re running an internal but have you ever tried using an external with this manifold? Does it fit okay with the space given?
@tdtgarage1697
Жыл бұрын
No. I’ve never run one on this car. I’m sure it’s doable
Quick question. If you dont mind, i have a festiva with bp swap on megasquirt. Looking to turbo over the winter. Do you mind measuring from the head to the farthermost part of the turbo. I just want to see if i could get it to fit without hitting my core support.
@tdtgarage1697
2 жыл бұрын
From head to hot side is 9 3/4 inches. On Compressor housing outlet to head is 10 1/2 inches. It’s clocked towards the driver fender. If you could clock it straight up or down then you would have really close to 9 and 3/4 inches the entire length of the turbo. I hope this helps👍🏻
@cafemotorsports
2 жыл бұрын
@@tdtgarage1697 thank you
My 1.8 turbo manifold is at the shop getting coated then decking.
@tdtgarage1697
2 жыл бұрын
🙌 it will work great for you!
How's the G35 build going?
@tdtgarage1697
2 жыл бұрын
Well the front end kinda turned into a disaster.. I’ve had to put a engine cradle and basically replace all the front driver suspension parts. Getting a driver side knuckle today actually. Then hopefully it will align right🤦♂️🤦♂️. If not back on the frame machine it goes for another pull. As soon as I get it straight I will be making more videos on it! Any ideas on what to cover just let me know and I’ll make it happen 🙌🙌
What are you running for a downpipe???
@tdtgarage1697
3 жыл бұрын
I made my own down pipe. Just used the flange that came with the turbo👍🏻 2.5 inch
What down pipe are you using
@tdtgarage1697
2 жыл бұрын
I made my own. Just used the flange that came with the turbo. 2 1/2 inch.
What size is your down pipe? And did you make your own?
@tdtgarage1697
2 жыл бұрын
I went 2.5 inches. And yes I made my own with the flange that comes with the turbo. I also notched the flange by the waste gate flap, so it opens all the way. So it doesn’t have any boost creep.
@OniMX5
2 жыл бұрын
@@tdtgarage1697 Okay nice. Do you think you could’ve fit a 3 inch? I have the same manifold and I’m interested in making one.
@tdtgarage1697
2 жыл бұрын
@@OniMX5 I’m sure you could fit a 3 inch. Might need a little trimming on the fire wall side down by the pinch weld. But to be honest if you want 250whp or less the 2.5 will do. But if you gotta go big I understand.
@OniMX5
2 жыл бұрын
@@tdtgarage1697 Yeah I have big plans but I was thinking I should go ahead and go 3 inch for future proofing.