Easy Stump Removal - Complete Burn

Complete stump burn. I show you how to burn a large green tree stump into the ground. The stump is about 28" across and the tree was cut about 6 weeks before the video. I use the wood from the tree trunk to burn the stump -including roots.
Burn takes place over about 15 days and I spend about 10 minutes per day on the project.
www.livingcommonsense.com
/ livingcommonsense-1091...

Пікірлер: 546

  • @ntal5859
    @ntal5859 Жыл бұрын

    15 days of fire....I am impressed...

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    I only wish it could have been 15 whole days but alas, it burns really fast.

  • @maodod1945
    @maodod1945 Жыл бұрын

    Thanks! I came to this video after struggling with a stump all day today. I built a fire pit around it, and set a fire on top. Didn't hardly phase it. Then I thought I would try charcoal for tomorrow, and was excited to see that I was on the right track when I saw this video. I was on the verge of looking to paying someone to grind up the stumps I have, but will give this a try first. And also, thanks to all that gave some extra tips to make the process go faster! I just love KZread! I've saved a ton of money fixing/doing things myself, dishwashers, dryers, cars, washers, you name it. Us woman rock!!!!!!

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    The charcoal option works great. The main thing is to keep the coals covered with more firewood or a flat piece of sheet metal to force all the heat down into the stump. Good luck and thanks for watching!

  • @nameisprivate5429

    @nameisprivate5429

    7 ай бұрын

    Girl I pull up KZread when my husband is working on something he’s struggling with. I put the bee in his ear and the lightbulb goes off and he fixes it 100% faster. He would NEVER go look for it himself 😂. KZread is a blessing

  • @n.b.p.davenport7066
    @n.b.p.davenport70667 ай бұрын

    I bet a lot of people can't wait to see this, to each his own

  • @randallparker8477
    @randallparker84773 жыл бұрын

    In 1965 (I was 10) my Dad and Uncle cut down 2 huge cedar trees, and 2 huge white oak trees at our deer camp in the Sierra Nevada's. One of the Oaks was 38 inches diameter and the stump was wider than that. One of the lower logs off the stump was about 6ft long and they left it next to the stump. Dad made a rock firepit around the stump and up against the log. The stump burned away after a couple of weeks, but the log just lost it's bark. Every year for deer and trout season that was the fire for the camp. They always built the fire against the log. In 1975 I was home from the Navy with some shipmates and we went to camp there. That weekend it snowed about 2 ft one night, I got the fire started back up the next morning, and the big charred side of that oak kept the camp toasty, and melted everything in camp. My Dad said it was 1980 when the forest service finally cut up and removed the last bit of that log and rebuilt the camp for day use only. That log lasted for 15 years! Thanks for the memory trigger!

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    That's a great memory! Thanks for sharing. When we're young we don't usually realize those fun times are what makes the best memories years later. Thanks for watching!

  • @cassiusnoel671

    @cassiusnoel671

    2 жыл бұрын

    You all probably dont give a damn but does any of you know a trick to log back into an instagram account?? I was dumb lost my password. I would appreciate any assistance you can offer me!

  • @shaneorion8396

    @shaneorion8396

    2 жыл бұрын

    @Cassius Noel Instablaster :)

  • @cassiusnoel671

    @cassiusnoel671

    2 жыл бұрын

    @Shane Orion Thanks for your reply. I got to the site thru google and I'm trying it out now. Seems to take a while so I will get back to you later with my results.

  • @cassiusnoel671

    @cassiusnoel671

    2 жыл бұрын

    @Shane Orion it worked and I actually got access to my account again. I am so happy! Thanks so much, you really help me out!

  • @zoran9a3hpdiy49
    @zoran9a3hpdiy493 жыл бұрын

    I am retired forest ranger, I do this in forest many time , burn out stump , just big hole in ground stay, usualy need week or two. Good job.

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    Thank you and thanks for watching

  • @weldnrepair
    @weldnrepair Жыл бұрын

    Thank you so much for taking time to make this video. I always gaffed at that process. I never realized how simple and effective it could be. God bless you.

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    You're very welcome! Burning the stump was relaxing and I enjoyed making the video.

  • @simsmr691
    @simsmr6912 жыл бұрын

    I love the commentary “throw some leaves on to make us popular with the neighborhood” I love It! Only because I have done the same thing....lol! Thanks for sharing.

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    From March - November, it seems like everyone is making smoke around here. Thanks for watching!

  • @bhoward9378

    @bhoward9378

    2 жыл бұрын

    Yep. As Big John once famously said, "if you don't like the way I drive, stay off the sidewalk!"

  • @johnmcclain3887
    @johnmcclain38873 жыл бұрын

    I just ran across this, I've got a stump maybe ten inches wider, behind my shop, been cutting it down some fifteen years, finally realised it had substantial roots under the concrete, and dug all around it, about two years ago, taken out maybe a ton of roots, twenty feet and more away, finally got it dead this year, it's a sycamore, much of the roots were six to eight inches thick, and I've been chopping it apart with an ax, since, I think I'll do what you did, but mine's dry, at least the first three or four feet, I'm tired of the ax work. Thanks for showing this, think I'm going to have it gone in the next week or two. Awesome!

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    That sounds like a tough one to be sure. Make sure you don't have any roots left going under the concrete or your shop. Also be mindful of any underground utilities -electric, natural gas, telephone or cable TV. Most of all, have fun with it, be safe and enjoy that feeling you get when the stump is finally gone!

  • @johnmcclain3887

    @johnmcclain3887

    3 жыл бұрын

    @@LivingCommonSenseI've been two years, two axes, sharp, dull, a backhoe, and I can run into the stump with the bucket, 7000 pounds, and it doesn't even shake a bit. It'll be a couple tons of root from under the concrete slab, when I get the stump "gone". It is rather dry, no green, so I'm thinking it will burn down pretty surely. I clear downed trees after every storm, got about sixty acres of woods, behind my machine shop, been figuring on just plodding along, but this video, with a green stump and green logs, (white oak, yes?) convinced me otherwise. I've seriously consider blasting, but would probably crack my foundation. Thanks for the reply, I really enjoyed watching it burn, gave me the plan. Thanks again.

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    @John Good luck with it and let us know how it goes

  • @promofe16
    @promofe162 жыл бұрын

    This reminds me of just chopping up wood with my grandpa back in the days. Literally would love spending all day just chopping wood than relaxing by the fire later watching dodger games. Rip grandpa, thanks for the nostalgia!

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    Thank you for sharing a great memory. Your comment reminded me of a camping trip I had with my dad and grandpa on a creek bank back in the day. My dog got on grandpa's cot for a nap. Grandpa was not amused, but dad and I sure were 😂

  • @promofe16

    @promofe16

    2 жыл бұрын

    @@LivingCommonSense hahah awesome man, much love and god bless!

  • @ragazzinayankee
    @ragazzinayankee3 жыл бұрын

    Thank you so much! I had several trees dead after a winter storm in Houston and now I have 3 new fresh huge palm stumps and a couple of citric tree stumps and this will be super handy. I'm planning BBQing them and maybe even fire some ceramics on them in the process! ;) Never let a good fire go to waste! I really apreciatte your time in making a video to share the process.

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    I'm glad you liked the video. I enjoyed making it as much as burning the stump

  • @thomasshea4466
    @thomasshea44662 жыл бұрын

    This is brilliant! I'm a city guy moving to a wooded lot. Been watching a lot of videos about how to remove a stump. Why isn't everyone doing it this way. I love when I see something that makes total sense and yet I never even thought of it before. I mean this is as common sense as the shoe lace. Thank you.

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    I appreciate your comment. Others have commented that I should have cut some slots with the saw across the stump to let air flow better. I've tried this and it helps a lot. Good luck with your wooded lot and thanks for watching!

  • @pingpong9656

    @pingpong9656

    Жыл бұрын

    Because it is very slow, labor intensive and potentially dangerous with underground root fires or amber causing satellite fires.

  • @carlmorgan8452

    @carlmorgan8452

    Жыл бұрын

    Did it before burned almost 2 weeks

  • @billparrish4385
    @billparrish43852 жыл бұрын

    Interesting method! Whatever works, preferably using what you have on hand so you don't have to spend anything, is always the definition of success. The fun of such projects is always taking your own situation, and your stock of materials and tools, and doing it with as little work and invested time as possible. 10 minutes per day is good work, and nothing to sneeze at. Well done! For a different approach, we had one a few years ago about the same size, maybe a bit bigger with how a couple of the fatter roots radiated out. It wasn't as green as yours, having been cut in the spring, and this was late summer when we burned it out. We took the approach of turning it into several rocket stoves around its edge, with most of the holes at each of the big roots. We chose this approach because we would often enjoy making a rocket stove in the firepit every so often, using an un-split firewood round (our rejects, that were half-rotten and no good for firewood), and were always amazed at how thoroughly and fast the intersecting holes would allow the fire to consume most or all of that huge chunk of wood, especially those where we had multiple horizontal holes intersecting the vertical 'chimney' hole. I had a 1" flat spade bit, 18" drillbit extension rod (gripped the bit's shank with a small socket end and set screws, then chucked into the drill), and an old corded drill (it was before I'd built up my current battery collection). My friend had a chainsaw, I want to say 24" bar, no tip guard, so he could make plunge cuts. We made I think 8 air shafts' in from the sides, right through the thickest parts of those roots, or just into the side of the stump to equally space them around the perimeter, then connected to each of those with a vertical hole from the top down to it. Within a day and a half of burning in each of these rocket stove holes, the connections to the roots were all severed, and most of the trunk part of the stump was gone in large burned-out circles at those points, like something had taken out huge bites from around the edge. After an overnight rain had extinguished it, we went in from 3 of those burned holes toward the middle, down from the top to connect to those, fired up those rocket stoves, and a couple days later it was all gone but a handful of narrow vertical slivers that had been between the holes. Burned down below grade (except for a hump of the fattest root), so once we knocked out the slivers (and chainsawed the top of that remaining root flat and below grade), we were able to cover with dirt and get some grass going. All told, 2 main burns over 6 days, with the majority of the working time spent drilling/chainsawing those rocket stove air holes, maybe half hour each day, for the 2 days. Built the fires in 5 minutes, walked away, fire did all the rest of the work. Getting air down below the stump with those 'shafts', which let the fire burn up from those intersecting 'combustion chambers', up through the stump, seemed to be what let it work so fast.

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    @Bill That’s awesome! Burning from the outside towards the center has the advantage of both allowing better air flow and more surface area to start the initial burn. I would think your method is going to work better with larger stumps. The last hump of root you had was probably the wettest and would have taken the most effort to dry out and burn. I get another large stump, I’ll give your method a try. Thanks for the comment!

  • @billparrish4385

    @billparrish4385

    2 жыл бұрын

    @@LivingCommonSense Thanks for taking your time to reply! And as to the reason, our assessment was that it was due to the fact that our 'combustion chambers' where the vertical chimney holes intersected the horizontal oxygen holes at their bottom ends, was what caused the real magic, since it got the fire down low, below most of the wood we wanted them to burn, with a good intake of oxygen feeding them. Even the hottest bed of coals is going to have a tough time burning downward through solid wood that's likely wet, and cold due to being in contact with the ground acting as a heat sink, while basically sitting on and choking its own bottom-end air intake, without a lot of tending. Oh, and as to making the rocket stoves around the edge, there wasn't any great strategy to those being edge locations. It was simply a function of the short tools we had: That's only as far in as we could cut the horizontal vent holes. If we'd been able to make a series of those more than a couple feet in, we'd have cut vertical chimneys down to them in many locations, had rocket stoves all across it, and done it all in one go. (In fact, we thought about cutting them both from the top, one vertical, one at a 45, but decided the 45 would function like less of a vent hole than an extra chimney, and that those would fail, having insufficient oxygen.) So, setting them around the edge wasn't, IMHO, the key to their success, it was the fact that they were under most of the fuel and burning upward, with plenty of oxygen feeding them from the horizontal holes. Good luck to you on your next one!

  • @jeffhumphries2453
    @jeffhumphries24532 жыл бұрын

    I like how you turned your mower into a bulldozer . That was cool. Keep on being creative. It gives others ideas on how to solve simple problems.

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    Thanks for your comment. The push bar turned out stronger than I thought it would. Traction became a problem with anything larger than these logs. Thanks for watching!

  • @jeffhumphries2453

    @jeffhumphries2453

    2 жыл бұрын

    @@LivingCommonSense a set of Carlisle super lug rear tires will give you plenty of traction. I put a set on the rear of my John Deere L111 it would pull alot better without spinning. I would try to get it stuck but it always pulled out of whatever mud or hill that I was on .

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    @Jeff - I looked at some super lugs but I didn't know how the transaxle in my cheap mower would hold up to them. I am thinking about a building a mid mount grader blade once the mower deck rots out like that always do and I'll definitely need better traction for that.

  • @jeffhumphries2453

    @jeffhumphries2453

    2 жыл бұрын

    @@LivingCommonSense that's a good idea

  • @WryGrass100
    @WryGrass1003 жыл бұрын

    That pusher you built onto the lawnmower was worth the viewing! Now...where's my saw and hammer!!

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    I built that intending to only push piles of leaves around the yard. It turned out much more durable than I thought it would. The tires break traction pretty quickly so that probably keeps the stress down on the pusher.. Hope you enjoyed the video!

  • @georgesebastian6306
    @georgesebastian63062 жыл бұрын

    CommonSense ain't so common. You nailed it clear the ash and let the heat do its work!

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    Thanks for watching!

  • @mariannesouza8326
    @mariannesouza83263 жыл бұрын

    Fascinating! I’m never going to need to do this, but I like that I know how. 😀 Thank you. I love that cute little dog!

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    Thank you for the kind words. I am glad you liked the video.

  • @toddwilliams8820
    @toddwilliams88203 жыл бұрын

    Sir, we wanted to thank you for your video on how to burn a green stump out completely. I can’t tell you how many we have watched and yours is the first that did it in a way that was easy and concise. We haven’t had to do this yet and until your video we did not feel we had the information we needed to do it safely and simply. We do now and are grateful.

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    Thanks for your comment. I also watched a few stump burning videos and many do not complete the process all the way. I wanted this one to show a complete removal start to finish. I’m glad you found the video useful and thanks for watching

  • @sebastianandjennifer1810
    @sebastianandjennifer18102 жыл бұрын

    Excellent video. I used a similar technique except drilled 1 inch holes with ship auger around top and sides of stump, then connected a HarborFreight Hercules 20V blower to one of the side holes with a metal pipe and left it on low speed to accelerate the burn.

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    I need to get a drill strong enough to turn an auger. I nearly smoked a 1/2” corded drill with the auger I have. I’m glad you liked the video. Thanks for watching!

  • @BlackVibeBallsack

    @BlackVibeBallsack

    Жыл бұрын

    Dumb way

  • @Chesbro_
    @Chesbro_3 жыл бұрын

    Wow I really appreciated this man good job haha 👍🏽

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    Thanks. Glad you liked it.

  • @kevwpdc
    @kevwpdc2 жыл бұрын

    what prompted me to watch this video was that I decided to dig out out a large hickory stump. It was easy with a trachoe I had it out in less than a half hour. But! I had a huge hole opened up large enough to literally bury a small car in. This method leaves a very small footprint comparably. I tried this using a 24 qt. dutch oven lid for a damper. I also sawed a vent hole at the very bottom of the stump. next morning it was still cooking. the second morning it was still cooking, the third morning it was still cooking and burning below ground level. [this stump was one year dead] enjoyable and very little effort. Only way to go, especially for older folks with little brawn left. and when a stump is in a hard to access area or where you don't want to tear up the yard.

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    If time isn’t too pressing, it’s a good way to kill a few evenings. Burning doesn’t make too big of mess either but there are times when a trackhoe is the only way to go. Just a matter of using the right tool for the job.

  • @MySqueakyfoot
    @MySqueakyfoot3 жыл бұрын

    I'd build a firepit around the stump, and let it burn itself out continually. To help it I'd mount an old hair dryer on cool to keep the fresh air flowing. Forget that rebuilding step, I'd prop up the grill and throw a couple 4-5lb pork loins well seasoned and wrapped in foil, slap a 55 gallon drum filled with holes over the stump and slow roast the rump. and don't forget the tater's.

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    I like the way you think! Off camera, I baked some potatoes off to the side of the stump and roasted hotdogs on separate evenings. It was spur of the moment and I figured seeing potatoes bake would be about as interesting as watching paint dry.

  • @johnstock6886
    @johnstock68863 жыл бұрын

    Nice job the air compresser was a awesome thought 👏 👍

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    Thanks, the compressor can generate some big time heat. Thanks for watching

  • @bettywhittington9654

    @bettywhittington9654

    3 жыл бұрын

    I liked the leaf blower as I'm not quite strong enough to pull my compresser around

  • @MrJamesTimmons
    @MrJamesTimmons3 жыл бұрын

    Love that bull bar you built on the front of your mower! I may have to try out your idea on mine lol.

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    Thanks! I built it to push leaves but it turned out to be very sturdy. Traction is an issue when pushing dirt. That probably makes the bull bar last longer though. It has also kept me from running over some small stumps hidden in tall grass. Thanks for your comment

  • @K3Flyguy
    @K3Flyguy3 жыл бұрын

    An old squirrel cage fan unit from an older furnace is a great way to supply neverending air to the fire. Easy to connect a 6-8" piece of metal ductwork to direct the air to best burn the stump. Thanks for sharing.

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    I happen to have one of those that did come out of a gas furnace. Thinking about putting some wheels on it so I can roll it around outside. It'd be perfect for this! Thanks for watching!

  • @alanwhitsitt5196
    @alanwhitsitt5196 Жыл бұрын

    Here's one for the tree huggers out there... I had a coworker that had a HUGE stump in his yard. He doesn't one year doing oil changes on his cars and then drilled a bunch of holes in the stump. All the old oil went on the stump, filling the holes, wait a little while for the oil to soak in and pour on more until the oil he had was gone. Put a tarp over the lug until next oil change and repeat. That winter, he put a little charcoal lighter fluid on it and lit it up. He said it smoldered for about 2 weeks before before the hole was about 2' deep. Following summer he filled in the hole and planted grass. LOL

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    @Alan - I have no problem believing that! That’s probably about as easy as it gets short of hiring a stump grinder. That used oil is also good for preserving the wood deck on a trailer and decades ago, I saw people mix it with sand and patch driveways with it. Thanks for watching!

  • @gorgosanma
    @gorgosanma2 жыл бұрын

    Haha it cracks me up how dogs like to get into the middle of everything.

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    Yep, this dog would be all up in the every video if given the chance 🤣

  • @8andsk835
    @8andsk8353 жыл бұрын

    Thank u for the video. I have a stump and it’s a mutha.. I’ll just have to take my time with it. Your video helps a lot!

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    Good luck with your stump. Stick with it and you'll have it burned in no time. Thanks for watching!

  • @rdkndr1

    @rdkndr1

    3 жыл бұрын

    Same here. Gonna be days

  • @8andsk835

    @8andsk835

    3 жыл бұрын

    @@rdkndr1 I ended up renting a stump grinder. Took 45 min and that monster stump is gone

  • @joseortiz5965
    @joseortiz59652 жыл бұрын

    Awesome. Love the lawn mower hack.

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    Thanks, I put the push bar on mainly to push piles of leaves but it turned out to be fairly strong. Thanks for watching!

  • @robertthomas5906
    @robertthomas59062 жыл бұрын

    When I have big ones like that I dig around them. You'd be surprised at how much a man can dig in say 1/2 hour to an hour. I try to get under it as much as I can. That one is probably 12"-18" deep. Something like that. Dig around it good. Now you have the stump suspended by the roots. If you have big roots you should consider cutting at least some of them. They often will supply a lot of water to the stump and prevent them from burning. That's what they're supposed to do after all. Now build your fire under it. I use the wood from the tree as well. Contain the heat. That stump should be all gone in a weekend. Just have to make sure to watch the fire.

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    I've been working another stump in my spare time. I cut a couple of moderately sized roots and sure enough, sticking out of the ground was a root bleeding a drop of water every few minutes. I've dug around it as well but I'm finding this new stump is like an iceberg -10% above the ground and 90% stretching out in every direction 😂 Thanks for the tip!

  • @dl9921
    @dl99214 ай бұрын

    Dont know how i ended up here, but im glad i did.

  • @LivingCommonSense

    @LivingCommonSense

    4 ай бұрын

    I'm glad you stopped by. Thanks for watching

  • @crown8144
    @crown81442 жыл бұрын

    A leaf blower on “idle” connected to a 90mm pipe can speed this up big time, I normally leave the blower on it for 3 hours a day. Uses hardly any fuel. Also can shave off more time by cutting the log lower (if you have a big enough saw) or asking the tree crew to cut it lower to ground. Then try and plunge cut it in a few places to the depth of the Bar. Soak that in 50:50 fuel/diesel mix for as long as you can then use your method with charcoal. Good vid

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    All good points. I started out thinking rocket stove but my drill would not turn the auger with as green as this stump was. The tree was infested with carpenter ants so no way I was taking any of it for firewood inside the house. As for plunging, just got to be careful to not get deep enough to hit dirt. Thanks for watching!

  • @Dreadsworn
    @Dreadsworn Жыл бұрын

    Man I've been working on a stump in my front yard. Burned it about 8 times so far. Its nearly gone, but I was starting to wonder if I messed up somewhere, with it taking so many days. But when you said it took 15 days I felt much better. Seeing you use the air compressor was pretty funny too. I started using my leaf blower the same way on the last burn.

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    LOL, the air compressor lets me get more precise aim but the leaf blower does it faster for sure. The big wet stumps will take a few days. Thanks for watching!

  • @EVMANVSGAS
    @EVMANVSGASАй бұрын

    I was going to say you should use a leaf blower. Then you did. Thanks for posting, I'm dealing with an old stump that had burnt pretty well on about half, not the other half is not so dry/rotten. The charcoal it something I didn't think about so I'm gonna give that a try. Thanks for the idea.

  • @LivingCommonSense

    @LivingCommonSense

    Ай бұрын

    A fireplace starter log is a good option when you find them on sale during the Spring. Thanks for watching!

  • @jonathanbailey4904
    @jonathanbailey49043 жыл бұрын

    I think you could've done it much faster if you turned the stump into a rocket stove. Basically you would cut a square hole in the top going as deep as possible then cut another hole at the base so that the two holes meet up. That would've allowed for ventilation and more heat at the bottom as opposed to burning in from the top down. Just a thought if you have to do another one. Either way, I enjoyed the video.

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    Very true. I’ll need to be sure I don’t go too deep, through the bottom of stump and run the chain into the dirt. Otherwise it is way easier to burn up than down. Glad you liked the video. Thanks for watching!

  • @Sqwan2

    @Sqwan2

    Жыл бұрын

    I tried that. Doesn't work well. Burning stumps somehow doesn't work well, no matter how you do it.

  • @AP-br6dh
    @AP-br6dh2 жыл бұрын

    Being from CA, I'd probably end up in jail for starting the "KZread Fire". 🤣 I enjoyed watching the video though.

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    It seems there are always fires out west during the hot and dry Summer months. I'm glad you like the video and thanks for watching!

  • @johnhalter7287

    @johnhalter7287

    2 жыл бұрын

    Those communist you guys put in charge of your life would not survive long in the rest of America. Massive crime in the open in much of California but their priority would be hanging a stomp burning

  • @petertimmins6657
    @petertimmins66572 жыл бұрын

    Great technique. One thing I would add to this, especially for a larger stump, is to drill a bunch of holes in the top also. Drill them as big and deep as you can. Next, fill them with diesel or kerosene. Do that over a few days to allow the fuel to soak into the stump. Once you have done that then proceed like this. You can also make the bowl when you drill the holes and put fuel in that too to help keep your greenish stump burning completely.

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    Thank for the awesome tip. I'll be sure to give that a try on the next one. Thanks for watching!

  • @takumi2023

    @takumi2023

    2 жыл бұрын

    I rather drill them from the side

  • @bele28

    @bele28

    2 жыл бұрын

    @@takumi2023 yep.. drill a hole on top in the middle of stump.. then 3 holes on the sides in the bottom of stump so they meet in the middle... vuola.. stump has airflow.. from bottom.. burns out fast

  • @branchcovidian2001

    @branchcovidian2001

    Жыл бұрын

    I had a friend do the same thing with old kitchen grease. It worked great.

  • @joshcalarese8622

    @joshcalarese8622

    7 ай бұрын

    grease works but just an FYI diesel or gas evaporates in minutes. it will not "soak in" over a few days

  • @rdkndr1
    @rdkndr13 жыл бұрын

    Great uncommon sense. Thanks!

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    Glad it was helpful!

  • @Prosecute-fauci
    @Prosecute-fauci7 ай бұрын

    I’m currently burning a 30” green mesquite stump down. Its currently been smoldering for the past 4 days and the active fire went out 3.5 days ago. I didn’t do any special setup to burn it other than digging the dirt out from around it, and putting about 40 kilos of charcoal on and round it. Worked like a charm.

  • @LivingCommonSense

    @LivingCommonSense

    7 ай бұрын

    Slow and steady gets it done and you don't have to stay on top of it like with a raging fire. I call that a win. Thanks for watching!

  • @opensourceandcloud
    @opensourceandcloud3 жыл бұрын

    Great job man

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    Thanks. Hope you enjoyed the video.

  • @christianmittasch8972
    @christianmittasch8972 Жыл бұрын

    Nice job... If i do the same thing,i would drill some holes deep as i can in the center and drill some sideways from the bark into the core. The fire gets more air and burn may better and faster

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    @christian - That's definitely the way to do it. This stump was green/wet and the "cuttings" clogged the bit I tried using. Complete fail. That is when I grabbed the saw and carved out the little bowl for the charcoal. If you can turn a stump into a rocket stove, that's the way to do it.

  • @ArtypNk
    @ArtypNk3 ай бұрын

    When I had to burn one years back, I prepped it by spending 15 minutes going at it with an axe. It's so, so much easier to burn a clump of splinters that are held together than it is to burn a solid block.

  • @LivingCommonSense

    @LivingCommonSense

    3 ай бұрын

    Yep, that creates more surface area to burn and lets air get into it better too. Thanks for watching!

  • @ThomasBarone
    @ThomasBarone2 жыл бұрын

    This will be very helpful knowledge here on our farm!

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    Glad it was helpful! Thanks for your comment

  • @RAMPHD
    @RAMPHD3 жыл бұрын

    Good comment about forcing the fire down. I had the same issue - big black crater. I actually had a metal galvanized outdoor fire pit that I ringed around the stump. Blew air under it - needs another burn!

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    Thanks. Add some air and hold the heat to the stump is all it takes. This kind of thing is really not all that hard. It just needs a little "know how" to keep it rolling along. I appreciate your comment.

  • @RAMPHD

    @RAMPHD

    3 жыл бұрын

    The compressor blower was a great idea! Saw the use of a Echo-type leaf blower too. Was a little concerned with the sparks flyin'!

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    For sure on the sparks. I always hung around for a few minutes afterward to be sure nothing I wanted to keep happened to light up 😆

  • @briananderson7497
    @briananderson74973 жыл бұрын

    Great Video. I have an Oak that I'll be cutting down in the next month. My concern with your tactic is the tree/future stump is about 4 feet from the house. Not sure about having a fire going for that long that close to the house. Even though it's middle of winter, so everything should stay good and wet. The tip on keeping it covered to radiate heat down was a new one for me. Hadn't thought of that. I'll definitely give that a try if I go ahead and burn it out.

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    I have to say this: I'd probably recommend against burning that close to a house. Plus, it sounds like you have a great candidate for a rental stump grinder or mini excavator. I don't want to be a downer. This comment is as much for everyone reading this as it is for you. Heat currents could potentially carry embers to your roof or possibly into the attic through a gable or soffit vent. Some smoke will likely leak into the house. Thinking smoke detectors and fire alarms. Be sure to have a good water hose nearby and keep the ground and house wet if you go forward. Protect the house wall from the heat. Also I'd probably call in a "locate" for underground utilities (power, gas, cable, phone...etc) running to the house. Setting fire to a power or gas line is a whole new kind of problem nobody wants on their hands. Finally, use your common sense. No accelerants or petroleum products and never leave the fire unattended. I'm planning some seat time in a mini excavator in the near future. An oak stump would take all day but dang, it would be fun. Thanks for watching and commenting. Your feedback tells me what people are interested in. Best of luck with your stump ridding project.

  • @fionam3554

    @fionam3554

    2 жыл бұрын

    guess it is too late, but maybe you could have put a steel 55 gal drum around the stump while you burned

  • @briananderson7497

    @briananderson7497

    2 жыл бұрын

    @@fionam3554 I took advantage of the wet soil of winter to dig out the stump. Biggest pain was a lot of rocks in the soild that shredded my fingers. As I got the roots exposed, I cut them out with chainsaw and a handsaw. After finally getting the stump completely cut from the ground, I was able to roll it out of the hole and to a safe spot away from house. I cut a hole on the side and a chimney on the top and just burned out the stump slowly over 3 days. The 55 Gal Drum would have really been a good idea though.

  • @kokigephart111
    @kokigephart1119 ай бұрын

    Remember , burning wood carmelizes the sugars in the wood making it rot resitant . If you dont get a complete burn the leftovers will take much longer to rot.

  • @LivingCommonSense

    @LivingCommonSense

    9 ай бұрын

    I knew that partially burned wood tended to last a long time but didn't know why other than the ants and termites wouldn't mess with it. I guess this explains it. Thanks for watching!

  • @philoso377
    @philoso3772 жыл бұрын

    Excellent idea that works, it is inspirational. One thing I’d add to is to turn it into a jet stove like burner. Vertical combustion chamber and chimney in the core and one or few side holes 45 degrees down the combustion chamber base. For the inlet hole facing up wind place a front panel with a hole feeding the inlet hole. That eliminates frequent maintenance - air hosing the inlet to restart burn and ash evacuate.

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    I think I’ll try your method on the next dry stump I come across. Sounds like it might work.

  • @thomasfrye8996
    @thomasfrye89963 жыл бұрын

    Great job!

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    Thanks! Hope you enjoyed the video

  • @bhoward9378
    @bhoward93782 жыл бұрын

    The compressed air is a major assist. Have you tried drilling lateral holes at an angle underneath a stump and then forcing air from below?

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    I couldn't drill it with an auger bit because it was green and the cuttings kept packing in the grooves. A 1/2" corded drill wasn't enough. Getting air and fire deep into the stump would have helped a lot early on.

  • @jackriley5974
    @jackriley59743 жыл бұрын

    In the 50s a neighbor removed Oak stumps twice that size with very little effort. He built a small fire at their base and placed the exhaust of an old Electrolux vacuum in a way as to create a forge. It took many sessions but he didn't seem to mind watching it from a lounge chair with a beer in hand.

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    Yep, stumping burning can be therapeutic if using the proper equipment! :)

  • @hyster2568

    @hyster2568

    2 жыл бұрын

    My kind of nights!!!

  • @M70ACARRY
    @M70ACARRY25 күн бұрын

    I currently have a stump this size. It's burning right now. I will win.

  • @Technoanima
    @Technoanima3 жыл бұрын

    Huge success!

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    These are a lot of fun too!

  • @solohoh
    @solohoh Жыл бұрын

    Well, and patiently, done...entertaining too, thanks

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    I am glad you liked it. Thanks for watching!

  • @Woody615
    @Woody6158 ай бұрын

    After cutting the center hole, how about cutting some other slits in the stump on top? It would provide more surface area in the stump so that hot coals could fall into them and start burning also.

  • @LivingCommonSense

    @LivingCommonSense

    8 ай бұрын

    Yes that would have helped alot. I did this very thing in a couple of follow up videos with great success. Thanks for watching!

  • @tomjeffersonwasright2288
    @tomjeffersonwasright22887 ай бұрын

    I just hooked shopvac blower to hose to 6 feet of pipe into the heart of a charcoal fire, and left the air blow. It was gone pretty quickly.

  • @LivingCommonSense

    @LivingCommonSense

    7 ай бұрын

    Awesome! I would nave assumed it may have blown the fire out after the initial flare up caused by the air from the shop vac. I may have to give that a try. Thanks for the tip!

  • @DennisFahlstrom
    @DennisFahlstrom2 ай бұрын

    I have burned out about 30 stumps on my farm ranging from 10” - 4’. I’ve found the fastest and most effective way of burning them is to use a chainsaw to cut a number of vertical slots in the stump, then take a large auger or forstner bit (at least 3/4”) with a bit extension and drill a dozen holes near the base reaching to near the center of the stump. Do this using the clock face as a circular guide and slope each hole slightly downward with a goal of having the last third of the hole beneath ground level. I use old used motor oil as my starter fluid and let it soak into the holes for a few hours. Then set it on fire and place a burn barrel around the stump to focus and control the fire. If the stump is too large for the diameter of a 55 gallon barrel I have four 1/4” metal plates that are 5’ long and 3’ high that I stage vertically around the stump to take the place of the barrel. I go out and use a leaf blower to remove ash daily and reignite the burn. It’s never taken more than 4 days to remove a big stump and most stumps that are under 3’ in diameter are gone in 2-3 days. A nice byproduct of these burns is the dust created is mostly potash which is beneficial to the soil. It works and takes no more than 1-2 hours of total effort from start to finish. It’s a safe, non polluting way of disposing of old motor oil which burns a long time in those holes. I’m presuming it’s non polluting because the grass grows back where the stump was in a brief period.

  • @LivingCommonSense

    @LivingCommonSense

    2 ай бұрын

    Yes, I've cut a few slots in stumps since this one and it works well. The grass grows well especially when the ash is tilled into the soil that fills the void left by the burned out stump. I like to avoid a roaring fire as those burn out quickly and I don't hang around to watch it. The slow steady heat dries the stump out as well. Its a great way to kill a few hours over several days. Thanks for your comment.

  • @anthonyseverino8292
    @anthonyseverino8292 Жыл бұрын

    Really curious what that adjustable wrench was for at the beginning

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    At first, I tried drilling it with an auger bit but the stump was green. The drill cuttings packed in instead of being driven up and out the hole. The bit got stuck and I almost burned up a drill. I used some hand tools to back the bit out and pull it out of the stump. Then I used the saw to cut the bowl and then started the fire. Thanks for the question and watching!

  • @raymondfeliciano5019
    @raymondfeliciano50192 жыл бұрын

    Very helpful. Thanks

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    I’m glad you liked it.

  • @alcamerc9923
    @alcamerc99233 жыл бұрын

    My HOA.would have a fit if I try this in my backyard.

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    They won’t see the smoke at night. Your best option after leaving the hoa is probably a stump grinder. Just no fun paying someone to do it.

  • @CattleRustlerOCN
    @CattleRustlerOCN2 жыл бұрын

    Would it help speed up the process by drilling an air hole thru the stump at ground level downward into the center from the outer side?

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    Absolutely! I tried an auger bit, 3/4" but is was hard going. Since it was green and wet, the cuttings wouldn't evacuate properly and it gummed up the bit. I let a little white smoke come out of the 1/2" drill. I probably could have cut out a "square" tube with the chainsaw to make a rocket stove as you describe. However, I had plenty of firewood laying on the ground that wasn't going near my house since the tree was infested with carpenter ants. Turned out the tree produced just enough firewood to burn up the stump. Thanks for watching!

  • @JohnBfree29
    @JohnBfree292 жыл бұрын

    I drill holes and mine are completely gone in a weekend with me never having to do anything,one straight down and 4 around the sides,it’s called something stove lol but I don’t remember. I have to start with a small bit and keep working my way up to my 1” or you will break your wrist or burn your drill up since I’m to cheap to buy a better drill.

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    I tried an auger bit, 3/4" but is was hard going. Since it was green and wet, the cuttings wouldn't evacuate properly and it gummed up the bit. I let a little white smoke come out of the 1/2" drill. That's when I busted out the chainsaw. Thanks for the comment

  • @omg11076
    @omg110764 ай бұрын

    You should've drilled a few holes in the side, then some holes through the top going down to those holes. Like a tobacco pipe. That way, it would have constant airflow and more surface area to burn.

  • @LivingCommonSense

    @LivingCommonSense

    4 ай бұрын

    You are right about that. I have found that some vertical plunge cuts with some horizontal slots cut across the stump work similarly. Thanks for watching!

  • @fbk2121
    @fbk21213 жыл бұрын

    Great job! Just one question: do you think it would have burned down by making it into a rocket stove? One drill hole in the middle, and then several holes a little from the sides to meet the hole in the middle?

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    I think drilling out some holes would have helped a lot. I gave it a shot first thing but being wet and green, the drill cuttings packed the channels in the auger I used. Drilling failed soon after I started, so bad in fact, I didn’t include it in the video at all. It made no difference. Only had a 7 amp 1/2” drill and nearly burned it up. Another stump burn video is coming up so be on the lookout and thanks for watching!

  • @JP-kb4yi

    @JP-kb4yi

    2 жыл бұрын

    Drilling makes a huge difference.

  • @JP-kb4yi

    @JP-kb4yi

    2 жыл бұрын

    @@LivingCommonSense when drilling have a good shop vac and an extra person. One person drills the other is using the vacuum to keep the hole clean. Also I strongly recommend using a heavy duty drill that plugs in if you have one.

  • @stlsucks
    @stlsucks3 жыл бұрын

    Nice!

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    Thanks!

  • @young11984
    @young119842 жыл бұрын

    My uncle burned his shop down this way, a couple of the main roots actually came out of the ground under his shop and the fire traveled thru the root and set the shop on fire 40’ away a week after he lit it up. His was a 6-8 month old stump though but the tree was cut down in July so it was sappy

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    That's kind of scary. Thankfully, the roots on this one didn't take off and only burned when I put fire on top of them. Thanks for the heads up!

  • @patrickcronin6829
    @patrickcronin68293 жыл бұрын

    This is pretty much the way I do it, only I burn it out in about 3-5 days. Green or dead years doesn’t matter. I cut the tree off a little bit higher, about 2 feet. I dig around the base. I then cut a pie shape with my chainsaw into at least 6 pieces. Cut directly through the buttress roots as low as I can go without fouling the chain. Use the leaf blower to get the sawdust out and start the fire on the top middle of the trunk. It burns down to the bottom in a few minutes, but you need to blow it out and keep rolling logs into the middle for a few days after. I believe most of the time is really just driving the water out of the stump wood. Once it sets in, it will keep burning well below ground level and you need to use some dill dirt.

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    Drying out the stump is a must. I'll give this pie shape cut method a go next time.

  • @MrAfonso77
    @MrAfonso77 Жыл бұрын

    That stump was blown away.

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    I guess it was, bit by bit 😂

  • @Raven-rl7gj
    @Raven-rl7gj8 ай бұрын

    Cool project.

  • @LivingCommonSense

    @LivingCommonSense

    8 ай бұрын

    I hadn't considered it so much a project but: Time outside ✔ Use some tools ✔ Make the yard better ✔ It was clearly a project.

  • @SHRI_the_DIY_Warrior
    @SHRI_the_DIY_Warrior Жыл бұрын

    Good job budd

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    Thank-you and thanks for watching!

  • @roenaldibotes544
    @roenaldibotes5442 жыл бұрын

    I am going to have to do this. Bought a house about 4 years ago. Cut more the 3/4 of the tree down. Did not have a huge chain saw. So we did what we xould with what we had. Drilled holes and trief poising it. It is as if we just gave the tree some reason to grow even more. So I am going to ren a huge chain saw and cut it as close to the roots as possible. And give it a couple of weeks to dry a bit and then burm the stump. Our nabours sai the have been trimming the tree for more then 25 years. So O dont even want to see what the roots are doing to the houses around us. My house has started cracking. I have very liitle choice but to let the tree go.

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    I wish you the best of success in riding your yard of stumps. Two things I would caution you on is be careful if you have to burn a stump close to your house. Also be mindful of the roots. The roots can burn under ground for several yards and you do want those burning under your house. Good luck!

  • @magicponyrides
    @magicponyrides Жыл бұрын

    This seems like a really fun process, honestly. Couldn't you have cut the stump a lot closer to the ground to speed it up? Thanks for the video.

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    @magic - I enjoyed doing this and yes, I probably should have cut the stump closer to the ground. I could have used the slap I cut off to help burn the stump. Thanks for watching!

  • @markhall3434
    @markhall3434 Жыл бұрын

    probably take a couple/three hours with Big 420cc stump grinder from the Box Store. Much more fun to play with fire, accelerants and Blowers.

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    I intend to try one of those rental stump grinders once I have a whole day to devote to the endeavor. You're right though, lots of fun burning stumps!

  • @timothyjerry2455
    @timothyjerry24553 жыл бұрын

    Nice job. Cool corgis

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    Thanks, she is strong willed but one of the most loyal dogs I’ve ever had.

  • @bryansimmons3723
    @bryansimmons3723 Жыл бұрын

    Good process, the only thing I do differently is I take a drill and 1/2 to 3/4 in bits and drill a bunch of holes in the stump, and if I have it I pour used cooking grease, old oil, or a little diesel into the holes for a couple of days to add something to help it burn a bit faster. Even without the add ons the extra holes help it to burn faster.

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    Got a video coming up almost just like this. It works well.

  • @weeb3277
    @weeb32772 жыл бұрын

    What if you put things like wax or lard or oil, will it help to burn?

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    Absolutely. If the stump was dry, it would soak up the oil very well. This stump was very green and wet and so with oils tendency to float on water, it would have been very slow to absorb into the wet stump.

  • @alex02101967
    @alex02101967 Жыл бұрын

    mmm.. Good idea, effortless, quick, cheap and clean..

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    The ash made a mess but the grass grew great there the following year. Thank for watching!

  • @porthos9502
    @porthos9502 Жыл бұрын

    You are a Wizard turning a stump into a Dog!

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    Yeah, I'll have to be careful not to do that again! 🤣 Thanks for watching!

  • @markschilling740
    @markschilling7403 жыл бұрын

    You might want to try cutting a "x" about 6 inches deep and use wood wedge to split the stump . It would let more air and heat in .

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    I’m currently working on another stump video project. I started out on it as you suggest, vertical cuts across the stump. This one is also very green. The wetness of a green stump seems to make the wood fibers mildly flexible and the wedge instantly pops out. I think if the stump were dry, the wood fibers would be more likely to split as I hoped the green stump would. Of course I should wait for the stump to dry before burning it out of the ground but nobody got time for that. Thanks for watching!

  • @frankcarey9567
    @frankcarey95672 жыл бұрын

    A nice powerful shop fan in front of that sure would accelerate the burn.

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    For sure but I wasn't hanging around watching and I'm a bit leery leaving a fan blowing on a fire when I'm not around.

  • @frankcarey9567

    @frankcarey9567

    2 жыл бұрын

    @@LivingCommonSense Good point, a fan would blow embers all over.

  • @Insan3AsylumXO
    @Insan3AsylumXO3 жыл бұрын

    We have a smaller stump from a holly we cut down last year. We drilled holes in it and filled them with stump rot but it laughed at us. Its roots are vast and caused problems by messing with some water line piping. The stump itself is only a few feet from the house. Given that, would burning it out even be an option/safe?

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    I wouldn’t recommend burning next to a structure. I’ve heard pouring ruined buttermilk on the stump will get the bacteria started that will speed the decomposition. I’ve never tried it

  • @thomasreed8710

    @thomasreed8710

    3 жыл бұрын

    I piled dirt on top and my Bride planted flowers. A few years and good rich dirt and pretty flowers.

  • @mattmoore7796
    @mattmoore77962 жыл бұрын

    Done this before. Same method but used a sheet of corrugated to to reflect the heat back to the stump. Only problem was the roots underground started burning. Took several days to get that stopped.

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    These roots were very wet and green but I could see dry roots burning under ground could present quiet a predicament

  • @thebentzenable
    @thebentzenable2 жыл бұрын

    Thank you 💪🙏😊

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    You're welcome 😊 Thanks for watching!

  • @jimbob4456
    @jimbob44562 жыл бұрын

    If you don’t have a big compressor, you can use a leaf blower.

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    @Jim - Yeah, the leaf blower is better for blowing away the ash too.

  • @luct3368
    @luct33682 жыл бұрын

    i've seen people use an oil drum with the top and bottom cut off. the thing acts like a chimney when put over the stump, and keeps the air flowing, and has the same effect as the blower, just more steady. works in ~48 hours.

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    I’ve got another stump I’ll be trying this out on come fall when it cools off a bit. Thanks for the tip

  • @cswilliams29
    @cswilliams292 жыл бұрын

    Liked for the homemade push bar on the lawn tractor.

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    Thanks 👍

  • @thomasreed8710
    @thomasreed87103 жыл бұрын

    I drilled numerous holes with 1"bit and filled them with old drain oil. Let it soak for several months and then set it afire. Burned out in a few days.

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    I nearly smoked a 1/2" drill with a 3/4" auger bit a stump like this one. I probably should have plunged a chainsaw into the stump a few more times and filled if full of oil as you describe. Thanks for the tip

  • @desaltzman8762
    @desaltzman87622 жыл бұрын

    I feel like a few vertical cuts with that chain saw and you could knock out most of the material. Like what they do with a table saw and a chisel

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    Some vertical cuts would have let more air down into the stump and it would have burned faster. Thanks for the tip!

  • @billmorris2613
    @billmorris26133 жыл бұрын

    Good morning from SE Louisiana 16 Jun 21.

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    Greetings from hot and humid Texas!

  • @nsatoday
    @nsatoday3 жыл бұрын

    Great video. I’ve used and seen many methods over the years. There are three to consider IMHO as to what I am personally seen used. One: take a one inch diameter auger bit that is at least six inches long and drill holes in the top every 5 inches or so. Come out every morning for a few days and fill the holes with a flammable of your choice. Top the holes off and it’ll slowly absorb into the stump. After a few days a Take a large chainsaw with ripping chain and make two x patterns. This allows air flow. Then I start a fire on top and use some split limbs to reflect the heat down. Use a leaf blower to clear ash and Stoke the fire occasionally. Usually only a 3 day process once fire is started. Doesn’t tend to go out and need rebuilding. Just clear and add material at top as needed. Two: use splitting wedges and either a maul or a back hoe bucket or similar to split the stump. Soak in flammable of choice overnight. Start fire with reflector. Clear and add material as needed. Usually 4/5 days total process. Three: if small enough to fit a 55 gallon drum over build an incinerator. Use a metal hose to connect a fan or electric blower to. Get the fire started and build a coal base. Turn on leaf blower/Fan. It will incinerate it usually in 1 day. Caution, only use this method where you have space and can contain any brush fires started by sparks etc coming out of the funnel

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    I'm going to give the drum idea a try sometime this fall. I've got the barrel and a squirrel cage fan that come out of a HVAC air handler. Texas summer time too hot and dry to be standing next to a red hot oil drum that's shooting cinders out the top several yards into the air😁

  • @Gainn

    @Gainn

    2 жыл бұрын

    The hole drilling method is the one we've always used. works a treat

  • @amberhesamisogynistheard2653
    @amberhesamisogynistheard26532 жыл бұрын

    So back about 10 years ago my cat passed and we buried him right underneath the Cherry tree in my backyard…..is this going to be a problem because I have to remove the tree this year?

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    I doubt it will have much effect on the stump at this point.

  • @themjoftrucking5922
    @themjoftrucking59222 жыл бұрын

    Great video! But can someone tell me why you can't just soak it with lighter fluid and let it burn?

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    That would work but the collateral burning could get out of hand

  • @thomasshea4466
    @thomasshea44662 жыл бұрын

    Is there any reason the ash could be detrimental to the surrounding area or am I good to blow it off and leave it?

  • @LivingCommonSense

    @LivingCommonSense

    2 жыл бұрын

    As long as you don't blow any embers or coals onto any surrounding sources of fuel, you should be fine. As for the ash, I have had all kinds of grass and weeds growing in that area of the yard less than a year later. Just keep a water hose near by to wet down the surrounding area while burning and to snuff out any flames that try to get away.

  • @johncover5877
    @johncover5877 Жыл бұрын

    I appreciate your effort, but the libs would have a stroke with the carbon emissions removing that one stump. I removed 5 stumps larger than yours and it took about 45 minutes. Modern stump grinders are compact and maneuverable, so I think you could have gotten one in there.

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    No doubt that stump grinders are much faster but besides CO2, decomposition of wood chips and saw dust can produce CH4, a very potent GHG. Burning stumps releases CO and CO2 without the CH4 release. A Columbia University study shows rising levels of CO2 in the atmosphere drive an increase in plant photosynthesis-an effect known as the carbon fertilization effect. While both CO2 and CH4 are naturally occurring in the environment, living trees can do more about the CO2 than they can with CH4. Its the lesser of two evils I suppose. Thanks for watching!

  • @mebaugh1
    @mebaugh12 ай бұрын

    Thnx!

  • @LivingCommonSense

    @LivingCommonSense

    2 ай бұрын

    No problem. Thanks for watching!

  • @monotheis6889
    @monotheis6889 Жыл бұрын

    15 days? One stump. Wow, that seems like a long time. Digging with water pressure and various cutting tools, we averaged 3 hrs total per stump × 11 for removal and cleaning. Burned clean stumps in one huge pile. Now THAT took some time 😉 A D-8 would've come in handy.

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    It was a few minutes a day for a couple of weeks but yeah, a D8 would have worked here as well. Thanks for watching!

  • @bobbygetsbanned6049
    @bobbygetsbanned6049 Жыл бұрын

    If you use wood cut for firewood and get an actual fire burning on it it will burn a lot faster. The more coals your fire produces the better, them big logs just smolder.

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    Yes, seasoned cut and split firewood would burn this faster. I was going for a slower burning fire here because the stump and pieces cut from the tree were freshly cut, green and wet. The fire needed to burn slow and long enough to dry the stump out as it burned. Firewood would have dried it out and burned it more quickly but I think it would have taken more firewood than what went into burning this stump. Thanks for watching!

  • @justintothetruth
    @justintothetruth3 жыл бұрын

    I believe the rocket stove concept is the best. With at least a small fan. At least a littl bigger that a computer blower fan.

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    I tried drilling the stump initially with a 1" auger bit. The stump was green and my 1/2" drill just didn't have enough torque to drill in past a couple of inches. Thanks for watching!

  • @richardcalvin9320
    @richardcalvin93203 жыл бұрын

    Yes cut into all sides of stump with chain saw,creates draft will burn out much faster.

  • @CarbonBeing88
    @CarbonBeing88 Жыл бұрын

    We use a 55 gallon drum and it works great

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    Yeah, I didn’t think a drum would go around the whole stump and burn it out without needing to move it around a bit. That would have worked fine in the end.

  • @shiftyfitter
    @shiftyfitter3 жыл бұрын

    Holy mackerel! coca-cola here in the UK isn't nearly as flammable as that!

  • @LivingCommonSense

    @LivingCommonSense

    3 жыл бұрын

    Lol..That may not have really been a coke😆. Thanks for watching

  • @JasonSpitzMI50

    @JasonSpitzMI50

    3 жыл бұрын

    Lol 🤭

  • @thomaskoshinsky7768
    @thomaskoshinsky7768 Жыл бұрын

    Drill 4 holes as low as you can to the middle of the tree

  • @LivingCommonSense

    @LivingCommonSense

    Жыл бұрын

    @Thomas - I attempted to drill this stump with an auger bit. The stump was too green and wet so the cuttings clogged the bit and drilling didn't work well. I'd like to try drilling on a dry stump and see how it goes.