Пікірлер

• 
  @drumstix33Күн бұрын

  Whered you buy the spray wand?

• 
  @LivingCommonSenseКүн бұрын

  @drumstix33 - It’s a Bon Aire Wash-N-Rinse Spray Gun, Model# WNR5D from Northern Tool. northerntool.com

• 
  @SteamCrane2 күн бұрын

  I found reasonably priced beekeeper suits at Tractor Supply. Weird to have them buzzing around mad and can't get at you. Flexible enough to climb a ladder.

• 
  @LivingCommonSense2 күн бұрын

  I've never seen one at my local TSC but I have not looked TBH. May be a regional item. Thanks for watching!

• 
  @SteamCraneКүн бұрын

  @@LivingCommonSense We have several TSCs within a few miles. They are like completely different stores, depending on how rural the area is. Lots of beekeepers around us, good local honey.

• 
  @LivingCommonSenseКүн бұрын

  I have a friend that keeps bees and harvests some honey from the hives. It’s noticeably sweeter and has a flower like aroma that is never in the store bought variety. Great stuff.

• 
  @SteamCraneКүн бұрын

  @@LivingCommonSense The other reason is that you won't be allergic to local honey, as you breathe the local pollen and are semi immune to it.

• 
  @unclelep4823 күн бұрын

  Easy ?

• 
  @LivingCommonSense3 күн бұрын

  Easy vs digging it out by hand with a shovel....

• 
  @unclelep4823 күн бұрын

  @@LivingCommonSense Fair point

• 
  @kellydaniels89924 күн бұрын

  I concede that this is a 3 year old video, and you are on HF (General class or higher Ham operator), you are an intelligent young man. With that said, most all of these videos on this platform are missing the thing you attempted with the compressed air & blower, O2 flow. I’ve got a 4’ diameter Red Oak stump, I’ve been putting of for 10-12 years. All this to say, thanks for the basic fire elements class (fuel, ignition, and O2). And with that said, I’ll be using a Milwaukee angle drill and the largest / longest auger bits I can find,,,,,,, I’ll make it look like Swiss Chess before lighting it off. I make a time lapse video, but I’m no creator, just modern day hillbilly/farmer/ET, so I’ll pray for y’all, and pray before I start on this one too. God Speed, and God Bless,,,,,,, Semper Fi,,,

• 
  @LivingCommonSense3 күн бұрын

  Man 4' will be awesome and been drying a decade, it should be ready. It's the warm season now so grab a lawn chair, fan and a cup of coffee and enjoy being outside. Make a whole production out of your stump burn with a dutch oven and tripod, brown some meat, make some chili or a stew or bake some potatoes if nothing else. Share the experience friends and family. A 4' stump would be epic. Memories for all. Thanks for watching!

• 
  @skydogo146 күн бұрын

  Did the same mistake LOL! Thank you for the video!

• 
  @LivingCommonSense6 күн бұрын

  You're welcome! Easy to do, easy to fix

• 
  @darkestgreenmewtwo8 күн бұрын

  here we are forced to have that service or they report it to the state

• 
  @LivingCommonSense7 күн бұрын

  I'm not sure where you are but there a many places around that have more government than they need to live

• 
  @vonhalberstadt359010 күн бұрын

  I believe the factory states loading nail first.

• 
  @LivingCommonSense10 күн бұрын

  It is obvious that I didn't read the directions but putting the nail in first would still probably be a safer practice.

• 
  @melinmm328010 күн бұрын

  Try a paint stir stick on an old corded drill. The ones that look like a propeller. Uses way less energy too.

• 
  @LivingCommonSense10 күн бұрын

  Those move some air...no reason it wouldn't work. Thanks for the tip

• 
  @christiangomez92113 күн бұрын

  ah i love the smell of chemical warfare in the morning lol

• 
  @LivingCommonSense13 күн бұрын

  smells like..... victory

• 
  @keonwells93416 күн бұрын

  Believe it or not, brake cleaner works great. Pretty much instant death

• 
  @MisterMatthew5918 күн бұрын

  Why do you need two adapters ? Why not use one 3 prong 120v to 4 prong 30 amp ?

• 
  @LivingCommonSense18 күн бұрын

  Doing this with two adapters gives me and (the viewers) the flexibility to use 120v generators that have either the NEMA 5-15R or L5-30R (receptacles). Some generators in the 3500w range have both types so I'd use the larger of the two when given the option. Good question and thanks for watching

• 
  @coquibunny879718 күн бұрын

  👍♥️

• 
  @LivingCommonSense18 күн бұрын

  Thank you!

• 
  @denisemccarson116318 күн бұрын

  Using the cover works great. Maybe next year, huh.

• 
  @LivingCommonSense18 күн бұрын

  The cover isn’t perfect but I’m not doing it this way again.

• 
  @A2J_Tim20 күн бұрын

  you need Chlorinated brake clean, The flamable brake clean does not work that good.

• 
  @LivingCommonSense19 күн бұрын

  I will certainly try the chlorinated brake clean if the wasps ever return...They don't come around much these days.

• 
  @That-guy91922 күн бұрын

  Does it kill hornets?

• 
  @LivingCommonSense22 күн бұрын

  @That-guy919 - I've not tried it on hornets. Some hold up inside a nest that makes spraying them very difficult. There are probably better methods for those types.

• 
  @That-guy91922 күн бұрын

  Where did you buy that sprayer from

• 
  @LivingCommonSense22 күн бұрын

  @That-guy919 - It’s a Bon Aire Wash-N-Rinse Spray Gun, Model# WNR5D from Northern Tool. northerntool.com I occasionally see it available on amazon but often out of stock there.

• 
  @DrDennis26 күн бұрын

  Hot Shot

• 
  @Workerbee67626 күн бұрын

  Electric chainsaw ?? Really ????

• 
  @LivingCommonSense26 күн бұрын

  Well it starts fairly easily. I've got gas saws too for when I cut the cord in two.

• 
  @UKSCIENCEORG29 күн бұрын

  I thought John Belushi was dead!

• 
  @chilly2ss29 күн бұрын

  WD40 = insta-death

• 
  @LivingCommonSense29 күн бұрын

  Yes, for sure...just be mindful of staining wood are anything that would soak it up.

• 
  @D2O229 күн бұрын

  Need to be careful to not overload shared neutrals with this type of setup. With the size of generator in this video, not a problem, but can be with larger generators capable of more than 15 amps.

• 
  @LivingCommonSense29 күн бұрын

  Yes, as long as the extension cord is appropriately sized for the breaker protecting the circuit. I've seen 2 pole breakers, intended for 240 volts have undersized neutrals which I think is against code these days. Thanks for watching!

• 
  @D2O229 күн бұрын

  ​@@LivingCommonSenseThere is that, but also the circuits in your house, shop, etc that are 120 and share a neutral. The breaker doesn't protect the Neutral.

• 
  @curtisb2129Ай бұрын

  Brake cleaner works great

• 
  @LivingCommonSense29 күн бұрын

  Yes, for sure...just be mindful of overspray on plastics are anything that brake kleen may melts. It gets rid of wasps quick

• 
  @UnitedArmoryАй бұрын

  Great video.

• 
  @LivingCommonSenseАй бұрын

  Thanks!

• 
  @M70ACARRYАй бұрын

  I thought about buying one of those Harbor Freight floor blower and aim at my stump.

• 
  @LivingCommonSenseАй бұрын

  You'll have to keep watch on it cause that will blow embers everywhere😨

• 
  @M70ACARRYАй бұрын

  I currently have a stump this size. It's burning right now. I will win.

• 
  @johnlee7085Ай бұрын

  I’d suggest more and possibly bigger grooves to facilitate more airflow and better combustion (less smoke). Also, rather than putting the whole round on top, cut it into 3-4” slices. This keeps the heat in while also providing more fuel to add to the combustion while not being top heavy. I also dig a little trough/moot around the stump to saturate with water while burning just to reduce the chances of root fires even if you think they’re too rotten to burn.

• 
  @LivingCommonSenseАй бұрын

  Great suggestions! This one was one of the "smokiest" stumps I've come across due to all the pine oil in the wood. That what makes it light and burn so easily. The additional sawing also removes material that in turn doesn't need to burn so that takes away burn time as well.

• 
  @b3owu1fАй бұрын

  Funny that I was thinking to myself.. couldn't I cut a 2x6 into 1/4" panels to use as baseboards instead of the crappy ass particle boards.. just ordered this saw (with its stand as its on sale for $170 off.. $399 + tax shipped) and thought.. I know it isnt a full 3" depth cut, but if I cut a little off each end (to clean up the edges) of a 2x6, and then run it down the 5.5" height.. 2.75" on each side, I should be able to make my own 5.5" (or less) baseboard panels from better quality wood than the particle board.. seems unfinished 4" height baseboards run about $3 per linear foot. A 10 foot 2x6 is about 1/3 the price overall I think. Granted spending the time to cut it into strips, clean it up with planer, etc is not free if you value time, but overall I would think I can save a bundle of money over buying cheaper particle or mdf board and then I can cut my own pattern with the router and ensure I can always get more later vs the stuff in our house now that I have no clue what router bit was used to cut it.

• 
  @LivingCommonSenseАй бұрын

  b3wulf - Yes about the only benefit the MDF stuff brings to the consumer is consistency. Real wood is otherwise better all the way around. Baseboards need a precision saw. The dewalt is not a furniture saw but its plenty good for baseboards. Thanks for watching!

• 
  @b3owu1fАй бұрын

  @@LivingCommonSense Well I tried looking it up but not sure I am getting the right answer. What is a precision saw vs using a table saw? Not sure what you mean.. you can't use a table saw to make/cut baseboards? If not, why not? Seems like you could.. other than some being long and having 45/reverse 45 cuts when needing to connect two together to hide the seam? Also, I seen a few videos about how the SawStop is more a furniture saw.. this is a portable job site saw. I don't quite understand why there is a difference? Other than the longer side tables giving more room to cut.. but you can do that to some degree taking the fence off and using stands/table/etc to give more room. May not be as accurate of course. But I am not sure if there is another reason.. e.g. not enough HP, RPM, size (blade)? I was torn between the 7491 and this one, I really REALLY like the stand on this one, and the 7491 for $250 more the stand was meh and the RPM/amp was 1000rpm lower so read that this is better for hard woods as well. As a DIYer who wont use this that often, I figured the more portable/compact fold up was better to store, but that other than a little less cutting depth, it should work fine for 99% of any sort of wood cutting I would use it for. I guess I will need a new blade for it as the stock one is meh from what I've heard.

• 
  @LivingCommonSenseАй бұрын

  To be sure, the dewalt has the most accurate fence of any table saw I've owned as a DIYer. I said it is not for furniture -and I was thinking cabinets when I said that..my bad. Look at how much slop/play is in the miter gauge slots...It also is a small table, not really suited to cutting 4x8 sheets of 3/4" plywood by oneself. It is very difficult to wield bulky materials that heavy...keeping a straight cut with the relatively short distance between the start of the fence/table and the saw blade. A 12' 2x6 is plenty challenging for me. OTH a furniture saw like a saw stop...much larger table, much longer fence and wider/more accurate measuring, less miter slot slop, big 3-4" dust collection ports, 10"+ blade, a motor rated to run all day and 3rd party attachments. All those things help a pro work faster and make money. That's all I meant. I'd probably use a miter saw to cut those angles but as you say, it can be done with a table saw but there is play in the miter gauge in this one. I wouldn't fret too much over RPMs between the two as the larger diameter of the 10" probably makes up in "tooth speed?" for the lower RPM. Either dewalt should make good baseboards and it will punch above it class when we're willing to make accommodations like extra stands, in/out feed tables and make multiple cuts. That does add time to the project but not a big deal to DIY guys like us. To me, baseboards and bookshelves are kind of the bridge between framing quality or building cabinets. I wouldn't hesitate to rip baseboards with the dewalt.

• 
  @b3owu1fАй бұрын

  @@LivingCommonSense Ah I gotcha. I do have Kreg stands that are rock solid, with side 2x4 mounts to put in between the stand and whatever table, then lay some plywood as a table top. I usually us a 4x4 sheet on each side of my Kreg's table. I would need some T rail option on the saw or stand though to place the 2x4 holders on that side, but I could also just use the two stands on one side, with 2x4 between for bracing, and line it up in height with table for outfeed. It's doable but I understand what you are saying. I would love to buy the SawStop, but too many unknowns on living situation right now to think of something that big. Actually why I went with the 8.25.. smaller/lighter, better stand (at least it seems so to me vs the 10" stand.. was trying to see if I could mount the 10" on to the stand that comes with the 8.25 model but doesn't look like it sadly even though you can attach the miter saw to that stand apparently) and ability to fold up and out of way with the saw on it. I always cringe a little at having the saw sit sideways for weeks/months though but used to do so with my bosch miter saw years ago and it seemed fine. If I end up buying a home again some day that I can afford to keep (unlikely in this market right now) I'd opt for the bigger table saw if I was going to get in to more wood working stuff, but not sure I would ever go beyond hobby stage. There is only so much you can build/upgrade around a small home. But it would be sweet if that sawstop 10" for I think I saw it for like $1400 could fit on a fold up stand.. so you get the benefits of the great saw while still able to fold it up out of the way when not in use.

• 
  @kembanggula4772Ай бұрын

  Is it possible to talk less? It's difficult to enjoy the video if you keep talking.

• 
  @LivingCommonSenseАй бұрын

  I know what you mean. I've been trying to find some underwater recording options but the creators keep talking over the audio. We all should do better.

• 
  @kembanggula4772Ай бұрын

  ​@LivingCommonSense for some people like me (i found many on youtube), watching and listening to wood burning/ cracking, saw macine/ logging is relaxing. Kind of therapy session. So less narrative is really helpful

• 
  @kembanggula4772Ай бұрын

  ​@LivingCommonSense for some people like me (i found many on youtube), watching and listening to wood burning/ cracking, saw macine/ logging is relaxing. Kind of ther. apy session. So less narrative is really helpful

• 
  @LivingCommonSenseАй бұрын

  @kembanggula - I get what you're saying. In fact I set up another channel just for that kind of content. It's mostly for my own listening but it may have some of what you're looking for. Here is one of my favorites: kzread.info/dash/bejne/mYGWmZiRgNjaiZs.html

• 
  @jimmybrad156Ай бұрын

  I just came here for the bench bass @ 7:54

• 
  @LivingCommonSenseАй бұрын

  Always try to have a little something for everybody in the video

• 
  @treaco89Ай бұрын

  Sorry but this is way more work than wasp spray, which kills them right away and you don't have to drag out the hose.

• 
  @LivingCommonSenseАй бұрын

  To each their own. Thanks for watching

• 
  @EVMANVSGASАй бұрын

  I was going to say you should use a leaf blower. Then you did. Thanks for posting, I'm dealing with an old stump that had burnt pretty well on about half, not the other half is not so dry/rotten. The charcoal it something I didn't think about so I'm gonna give that a try. Thanks for the idea.

• 
  @LivingCommonSenseАй бұрын

  A fireplace starter log is a good option when you find them on sale during the Spring. Thanks for watching!

• 
  @konkandesiАй бұрын

  Pump sprayer works better to coat their wings and body.

• 
  @LivingCommonSenseАй бұрын

  I agree with that but there is no denying that a pump requires you to get closer

• 
  @konkandesiАй бұрын

  @@LivingCommonSense That's true!

• 
  @jimmieburnett8543Ай бұрын

  You do it backwards bud. Long slow Coles burning is how you do it

• 
  @LivingCommonSenseАй бұрын

  Thought I'd change it up a bit. I've done both and typically the wetter the stump the slower I go. It takes some time to dry one out.

• 
  @jimmieburnett8543Ай бұрын

  @@LivingCommonSense I take a 55gallon drum. cut it in half... I cut out BOTH ends. so then you actually have two of them you i can use. I like how you cut slits in stump that was good. Then just put the Drum around stump. have plenty of wood to keep feeding it. then put piece of old tin on top too cover it then when ready for bed.(Put few bricks on top for weight to keep wind drum blowing over) leave a small opening so that way it will get some air. so the coals burn long slow. ALSO you can second it as a BBQ cooker😄

• 
  @LivingCommonSenseАй бұрын

  That tin is good. It reflects the heat well. I've consider bringing out the dutch oven during one of these. Those low slow fires are perfect for it.

• 
  @saibhreasllc2693Ай бұрын

  Bro I felt the exact same way putting it together the bolts made no sense the instructions were deplorable, I think they shouldn’t have even bothered with instructions they were an absolute insult to my mechanical abilities and just threw my mental Compass off

• 
  @LivingCommonSenseАй бұрын

  Yeah, the instructions are hot garbage but the mixer is pretty good. I've lent it out once and mixed a few bags for someone else's project but I went a whole different direction for my own project after being kind of put out with the assembly. It is what it is and I've got it if a ever need it. Thanks for watching!

• 
  @bretthansen4773Ай бұрын

  What is this? Two 60 volt inverters operating 180 degrees out of phase, one on the hot the other on the neutral?

• 
  @LivingCommonSenseАй бұрын

  That's what it look like. Definitely not my idea

• 
  @Superman-xr1ohАй бұрын

  Why is the video sped up? It's weird...

• 
  @LivingCommonSenseАй бұрын

  Some of the lesser important parts were sped up to save the viewer some time. Thanks

• 
  @Vernonu9Ай бұрын

  I've been using dish soap/water in a spray bottle for about 8 yrs now to kill bugs....Dawn seems to work better than the other dish soaps.

• 
  @LivingCommonSenseАй бұрын

  I've also noticed the non-name brand soaps are not as effective as Dawn liquid soap.

• 
  @chasehoneycutt4045Ай бұрын

  Just quoted 550 for the compressor and labor here in north Texas. The technician was nice and knew I worked in the water well industry and told me to save some money to order the compressor and do it myself, which I did.

• 
  @LivingCommonSenseАй бұрын

  That's about twice what I paid for the pump about a year ago. I'm glad you found a technician with integrity. He knows you'll remember him whenever you come across a problem that needs a professional to take care of it. Thanks for watching!

• 
  @LeuCustomKnivesАй бұрын

  @@LivingCommonSenseI know this video is a year old but did you check inside to see if you could just replace the diaphragms inside the aerator? Looks like HiBlow 60. I have a HIBLOW 80.

• 
  @LivingCommonSenseАй бұрын

  I believe the pump is serviceable with diaphragms, hoses and maybe the motor or parts of it. I couldn't hear the old pump doing anything which "not hearing" it is what brought the problem to my attention. The short version is I just wanted it fixed and didn't want to maybe order the wrong parts, then order more parts...etc. I went with the new pump so I could be done with it. To you point though, I think they are repairable.

• 
  @LeuCustomKnivesАй бұрын

  @@LivingCommonSense there’s a safety screw inside that shears off when the diaphragm breaks or a switch itself that gets flipped off when the diaphragm ruptures (depending on how old the unit is) It kills the power to the unit and it won’t do anything until you replace it with new diaphragms. This particular pump in your video is pretty common so you can go to wholesalesepticsupply when this new one breaks in 3-7 years. Might cost $70 by then. Unless you find red dust all over the inside of the unit when you take off the main cover they are serviceable.

• 
  @LivingCommonSenseАй бұрын

  @LeuCustomKnives - I still have the pump -piled up on the junk trailer. I think I'll pull it a part and take a look at everything that may be broken inside. Thanks for watching!

• 
  @rickschiaffo618Ай бұрын

  So, buying that wand and the soap that goes in it is cheaper than a can of spray??? Are you a high school graduate?

• 
  @LivingCommonSenseАй бұрын

  Thanks for your input! It's great to hear from those who truly understand the low cost value of single can of spray.

• 
  @craiggritterАй бұрын

  I just picked this exact same saw up 2 hrs ago! Tomorrow I’m going to see if it’ll run.. gave the guy $20

• 
  @LivingCommonSenseАй бұрын

  That's awesome! Hope yours's runs well. Good luck

• 
  @craiggritterАй бұрын

  Thanks for the reply! Got it to run super powerful needs a good cleaning though.

• 
  @dionysus20062 ай бұрын

  Better than the toxic wasp spray that only give about 20 sec of spray

• 
  @LivingCommonSense2 ай бұрын

  Absolutely and by volume, much less expensive. Thanks for watching!

• 
  @fair2middlin2 ай бұрын

  So you mixed some gas and it ran. Zzzzzz

• 
  @LivingCommonSense2 ай бұрын

  That don't all require a carb teardown and rebuild🤷‍♂️ I clearly bought the gas premixed

• 
  @rubensanchez17972 ай бұрын

  owner must be a ham with hf vertical ant.....

• 
  @LivingCommonSense2 ай бұрын

  @ruben - Yes but with no time to get into the shack these days

• 
  @JMAAD2 ай бұрын

  brake cleaner....its instant !!....no clean up

• 
  @LivingCommonSense2 ай бұрын

  @JMAAD - Yes, since uploading this, I've come to realize that almost anything besides pure water will put them down for the count

• 
  @rahulbiswas2112 ай бұрын

  Sir grate this can talking to you please your

• 
  @LivingCommonSense2 ай бұрын

  Yes. This was a difficult but rewarding project. Happy to answer any questions.

• 
  @TheMottasa2 ай бұрын

  Yes I use dish soap in a spray bottle and it works well. If you want something for inside a house to knock one down, that is non staining I use starting fluid (ether). It will knock them down instantly without leaving a stain or being wet.

• 
  @LivingCommonSense2 ай бұрын

  That’s cool. Thanks for the tip!

• 
  @johntoe61272 ай бұрын

  I've used brake cleaner, kerosene, carb cleaner, gas, and WD40. (not all at once). They all seemed to provide instant satisfaction.

• 
  @LivingCommonSense2 ай бұрын

  Yes, since uploading this, I've come to realize that almost anything besides pure water will put them down for the count

• 
  @MikeM-cz5ln29 күн бұрын

  Brake cleaner is the best - No residue! The brake cleaner evaporates leaving nothing behind.

• 
  @garydreyer55282 ай бұрын

  So many ideas from my arm chair

• 
  @garydreyer55282 ай бұрын

  What would we do without KZread

• 
  @garydreyer55282 ай бұрын

  Good job , I like the hard way it’s a hole lot cheaper

• 
  @LivingCommonSense2 ай бұрын

  I tried to pay a professional landscaper and plumber but none would take the job. Hard work but probably cost 1/3 of a pro