I have been looking all over the internet for this EXACT information! I love that there's so much out there for people in active chairs but i need as much help as I can get with this transport chair until i can get something else lol

Thank you for this video. Having more material like this would be exceptionally helpful.

Thank you so much. Zip ties were a great solution. Was able to fix mom's chair by laying it on its side, locking the wheel, then used 2 screw drivers to leverage it on part by part adding zip ties along the way. No hammer needed... Maybe because it is a cheap "Drive" wheel chair

thank you. was able to fix my grandmother's chair because of this.

figured most of this out. Your video made it very clear thanks for a concise easy to follow Method.

You da man this vid helped me.out now.i just have to find the tires thanks for posting

@heartlandmobilewheelchairr6849

2 жыл бұрын

www.landandwheels.com/

You're video was very clear. I have a question if You wouldn't mind answering. You know those quick release bolts on bicycles, is there a way i can convert my wheelchair so i can tale the wheels off so it fits in my car. And i need a solution for the back rest to fold also. Ty

Thanks!

Onde compro esse pneu

What’s with the crushing music?

Me podrían mandar la dirección por favor yo vivo por Naucalpan Edo de mex

What was the substance you put on the tire before installing. Was too fast to read the container.

@heartlandmobilewheelchairr6849

Жыл бұрын

We use run of the mill hand soap. Any lubricant will do, we prefer water based so excess can be wiped off easily.

I sure hope it’ll be like hanging a bike tire for me mine are non solid tires

I’ve seen so many comments on other KZread video. This tyre tool doesn’t work. The only one I can see for sell are from the USA. I’m going to try and make my own. Do you have the size

Only thing I don't got is the power tools or any tools really lol looks like I gotta spend some cash

you didnt flip the rim first, instead of fighting the hand rail? hmmm

@heartlandmobilewheelchairr6849

2 жыл бұрын

The hand rail runs into the mounting tool we have mounted into the bench vise

@rudygeorgiamulesandcountry1594

Жыл бұрын

It's 0N anyway ... !

Just thinking a plastic mallet would not risk dinging the aluminum wheel ?

You dont need the special tool - Do it in two steps - first work the tire around the hand wheel, then raise it from there to the rim. Do use zip ties for both steps. Don't even need to take it off the wheelchair. After it is in place I put a mall piece of pipe between the tire and rim, and work it around the wheel to seat the tire properly. Remove the pipe, and your done!

Que # de tornillo es la llave? 👋

Aap ki dukan ya soap kahan hai sir

Wheelchair Repair & Maintenance Project In Nepal

@heartlandmobilewheelchairr6849

Жыл бұрын

Thanks for the comment! I checked out your channel and love the project. Let me know how we can help or if you need anymore information!

Hey, man. Looks like that is the exact same wheel, and issue that I have, and is what I was looking for, but can't find. So, that was a nice find... if you answer me, I guess, lol... The handlebars, first I can't even figure out what they are, metal or plastic, then like I said, just like this one, they have that gunk around them. I was trying to clean it off, with a drill brush, scouring pad, sandpaper, but I can't tell what's happening, lol... I am now hitting silver underneath, but the gunk wasn't even gone, arrgghh, lol, wth?? Sounds like plastic, but how is it silver?? Do you know where I can buy new ones, only can find full wheels on Amazon, elsewhere. ty Peace

@heartlandmobilewheelchairr6849

Жыл бұрын

See if this helps you. Pg 172. We order nearly all of our wheelchair parts from Land & Wheel. I believe they are a plastic outer sheath over a metal tubing on the inside. www.landandwheels.com/343/172/

@blackopal3138

Жыл бұрын

@@heartlandmobilewheelchairr6849 Thank you, appreciated.

Why are you using a metal hammer on the wheel and spokes. Use a rubber mallet.

Naww I'll pass looks like I'll need to replace the wheel Look how your banging on the wheel FFS It could be bent out of wack. . . wobble wobble Na but thanks bruh, whatever works for you Doesn't work for me Ciao

@heartlandmobilewheelchairr6849

Жыл бұрын

Done this process on 100s of wheels and never had a problem. I am using the hammer on the rubber tire so I assure you it’s fine and not bending the rim. These rims are for transport chairs in a hospital they are plenty sturdy enough.