Thanks a lot for this great idea ! I use a big flat screwdriver and need approx 6 cable ties each side ....step by step one tie after the other...as the tire was a bit strong. But its very easy. 10 min and its done.
@antoniosilvestrojr. Жыл бұрын
I was thinking the same thing about using the pull ties. Neat video. Thank you. I have tires outside warming up in the sun before I start.
@marycook2788
11 ай бұрын
Thanks for the tip about warming the tires in the sun. I have a manual wheelchair and have been thinking about replacing the tires
@antoniosilvestrojr.
11 ай бұрын
Honestly, it was much harder than I expected. I was using a flat head screwdriver amongst other things. I am a boxer, drummer, and a pizza man by trade. I have very strong hands, wrists, and forearms and it was a job and a half for sure.
@Muis839 ай бұрын
Thanks, the tire wraps were the key. Flat screwdriver did the rest. The last piece wouldn’t sit well but some big pliers solved that.
@fasdude3810 ай бұрын
Excellent job. I just need to find a pry bar like the one you used instead of the screwdriver that I've been using maybe then I will be successful. I even put the tire in a hot bubble bath.
@iracemadacosta7 ай бұрын
Thanks! Good help! God bless you!
@MuhammadFirdausAbdullah184 ай бұрын
I thought I bought smaller size. Thanks for the video
@sureshkumar-vb9bb2 ай бұрын
Bhai sahab wheelchair ka chote wheel ka rubber mil jayega kya
@MiriamGarcia-lc4qj2 ай бұрын
Una forma más fácil de colocar la llanta sin necesidad de herramientas, es dejar las llantas a l sol, para que el material se agua de y se metan más fácil a la rueda, así las colocó muy fácil mi hermano, con su pura fuerza, otra idea que nos dió la persona que nos vendió las llantas era ponerlas en agua hirviendo para que se aguaden y así colocarlas igual, muy fácilmente.
@patrickdreiding334211 ай бұрын
Where can I get your crowbar?
@user-ki6zb5dd1n7 ай бұрын
請問你的工具叫什麼?可以在哪裡買?
@TycoDogg5 ай бұрын
How would you remove an old solid tire?
@9entax
3 ай бұрын
You can lever the old one off or some people just cut them off if they are completely worn out. It is a real struggle to get the new ones in but it can be done with strong hands, a strong lever and belief.
@uwee7673
3 ай бұрын
I use a saw and cut the old tire until the rim. Then I take a screwdriver and drill a bit. On the bottom I found small ropes...may be a old tire.... I use a sidecut to remove them. So the old tire is removed very easy.
Пікірлер: 22
Thank you for this video. Very clear tutorial. 👍👍
Thanks a lot for this great idea ! I use a big flat screwdriver and need approx 6 cable ties each side ....step by step one tie after the other...as the tire was a bit strong. But its very easy. 10 min and its done.
I was thinking the same thing about using the pull ties. Neat video. Thank you. I have tires outside warming up in the sun before I start.
@marycook2788
11 ай бұрын
Thanks for the tip about warming the tires in the sun. I have a manual wheelchair and have been thinking about replacing the tires
@antoniosilvestrojr.
11 ай бұрын
Honestly, it was much harder than I expected. I was using a flat head screwdriver amongst other things. I am a boxer, drummer, and a pizza man by trade. I have very strong hands, wrists, and forearms and it was a job and a half for sure.
Thanks, the tire wraps were the key. Flat screwdriver did the rest. The last piece wouldn’t sit well but some big pliers solved that.
Excellent job. I just need to find a pry bar like the one you used instead of the screwdriver that I've been using maybe then I will be successful. I even put the tire in a hot bubble bath.
Thanks! Good help! God bless you!
I thought I bought smaller size. Thanks for the video
Bhai sahab wheelchair ka chote wheel ka rubber mil jayega kya
Una forma más fácil de colocar la llanta sin necesidad de herramientas, es dejar las llantas a l sol, para que el material se agua de y se metan más fácil a la rueda, así las colocó muy fácil mi hermano, con su pura fuerza, otra idea que nos dió la persona que nos vendió las llantas era ponerlas en agua hirviendo para que se aguaden y así colocarlas igual, muy fácilmente.
Where can I get your crowbar?
請問你的工具叫什麼?可以在哪裡買?
How would you remove an old solid tire?
@9entax
3 ай бұрын
You can lever the old one off or some people just cut them off if they are completely worn out. It is a real struggle to get the new ones in but it can be done with strong hands, a strong lever and belief.
@uwee7673
3 ай бұрын
I use a saw and cut the old tire until the rim. Then I take a screwdriver and drill a bit. On the bottom I found small ropes...may be a old tire.... I use a sidecut to remove them. So the old tire is removed very easy.
Is it safe to add heat to the tire
@whoopty6045
Жыл бұрын
Yeah you can put it in a furnace 😂
Sar hamen 2 tier chahiye kese mangaye sem pis
how can i get that tool
@thangknowa3288
6 ай бұрын
Long screwdriver does fine.
Looks like his haven some problem s