easy heat floor thermostat

Пікірлер: 17

  • @gwncb3820
    @gwncb38208 жыл бұрын

    Does it matter if we place shower mats over the easy heat floor?

  • @RyanTheTechMan
    @RyanTheTechMan4 жыл бұрын

    Thanks for the video! Seems to have worked!

  • @MariaSilva-bw5hh

    @MariaSilva-bw5hh

    4 жыл бұрын

    Ryan The Tech Man hi would u happen to know how long the floor takes to get warmed up ?

  • @RyanTheTechMan

    @RyanTheTechMan

    4 жыл бұрын

    Maria Silva honstly, I set it to automatic and that worked, I then set it to manual and have left it there for 2 weeks now. Since then, it has only heated up to 4.0 (40f) I set it to 7.5 (75f). So, I guess a really long time? Or I did something wrong

  • @SAFx92
    @SAFx924 жыл бұрын

    How do you change the current time so your schedule is correct? My current time is showing 3 hours fast. Obviously I could adjust the schedule to be off 3 hours as well.

  • @ronaldluebke3065

    @ronaldluebke3065

    3 жыл бұрын

    Setting the 'Time of Day' instructions are the first item listed when you open the 'door' of the thermostat. Here are instructions from the printed info that came with the thermostat: D. Setting the Time and Day 1. Move the mode switch to the Off position; the actual Floor Temp and current time are displayed. 2. To enter the time setting program, simultaneously press and hold the BACK and the ACCEPT buttons for 3 seconds. The Day symbol flashes. Press the UP (s) or DOWN (t) button to adjust the Day. Press the ACCEPT button once to accept the Day setting. 3. After accepting the Day setting, the am or pm symbol flashes. Press the UP (s) or DOWN (t) button to set am or pm. Press the ACCEPT button once to accept the am/pm setting. 4. After accepting the am or pm setting; the Hour digits flash. Press the UP (s) or DOWN (t) button to set Hour. Press the ACCEPT button once to accept the Hour setting. 5. After accepting the Hour setting; the Minute digits flash. Press the UP (s) or DOWN (t) button to set the Minute. Press the ACCEPT button once to accept the minute value and exit the time setting program. During the previous steps, if no key input is received for 90 seconds or the mode switch is moved to other position, the program will exit the time setting mode and reset to the Default value of 12:00 AM, Monday. The time is now set, the thermostat clock will start running.

  • @MariaHernandez-hv3wb
    @MariaHernandez-hv3wb6 ай бұрын

    Should i leave it on auto? Can I change it to manual? How long does it take to warm up?

  • @MariaSilva-bw5hh
    @MariaSilva-bw5hh4 жыл бұрын

    Hi how long does it take the floor to warm up?

  • @michellenorman4554
    @michellenorman45544 жыл бұрын

    Does anyone know what the model number is for this thermostat? I need to replace the one I have and can't find the model to order.

  • @nancycrooks1414
    @nancycrooks14149 ай бұрын

    How do you change the battery

  • @kevindailey6805
    @kevindailey68057 жыл бұрын

    My house came with one of these thermostats and we need to remove it. We've tried prying for and sliding it and we cannot figure out how to remove the thermostat from the wall! How is this mounted?

  • @marcs8822

    @marcs8822

    6 жыл бұрын

    It's probably too late for the answer but there are 2 screws under the 2 oval plastic tabs

  • @brisa4409

    @brisa4409

    5 жыл бұрын

    @@marcs8822 may be late for him... But for me this is good news!

  • @michellenorman4554

    @michellenorman4554

    4 жыл бұрын

    @@marcs8822 Thanks! Your response helped me!

  • @michellenorman4554

    @michellenorman4554

    4 жыл бұрын

    @@marcs8822 Do you know what the model number of this one is?

  • @ronaldluebke3065

    @ronaldluebke3065

    3 жыл бұрын

    @@michellenorman4554 Shown is the Easy Heat Programmable thermostat Model No. GTS1. The FGS model thermostat replaces the previous GTS and FTS models