T O O L S Breaker bar 1/2 drive - amzn.to/2HenuMI Variator / Clutch holder tool - amzn.to/2ZuYJEA Torque wrench 10-150 lb/ft 1/2 drive - amzn.to/2GuMsHJ Massive socket depends on size on your scooter

@A_t0z

Жыл бұрын

Brother can you tell me please to open Honda pcx 125 2017 which number of tools require to open this big nuts ?

@Sebbuz11

11 ай бұрын

Hi. How much torque did you use?

Mitch is the true Hawaiian mechanic and the only person I know who will not wear shoes while taking things apart or putting them together... LOL... Great job and another great video for those who don't have impacts.

Congratulations and thank you, you have come up with a perfect solution to this problem.

What Mitch is showing here is that you can do this work without a compressor and pneumatic impact wrench, or a cordless impact wrench, which is a very effective but somewhat specialized setup. If you think what he’s using here are special tools then you have no business doing any work on a scooter. The spanner or pin wrench he used is a $10 Amazon item. You need this for the variator side of the transmission too. The socket wrench is a standard tool anyone who touches an engine should already have. And the giant socket is also something you need to be willing to spend $15 on to save a trip to a mechanic charging $75-125 an hour. You will also need that socket, and a torque wrench, to reinstall the nut with the proper safe tightness or the clutch will fly apart during use.

Yes, I used this method for undoing and tightening the clutch nut, thanks a lot, mate!

Also what is best upgrade to do after the exhaust and carb? I already have a aftermarket pipe and carb ,,,,should I get a aftermarket cvt?

Hello Mitch, what weight sliders would you recommend on my 2009 stock Ruckus? By the way thanks for all your videos you are awesome! Thanks Chris

What a great tip with the feet to hold the spring, thanks for all your interesting videos. /Per Lidberg Sweden

You're assuming we're all as coordinated as you are! 😄 Thank you for all you do, Mitch! We appreciate your skills and you're a great teacher!

@MitchsScooterStuff

Жыл бұрын

😄🙌🏼

I have a 07 vino 125 and I bumped a sidewalk going about 5 mph while it was still running. I bumped it on the clutch side of the transmission cover and it suddenly sputtered out and hasn’t started since. Do you think I could’ve jumped the timing just by a little bump, or do you think the transmission won’t allow the engine to run because something broke inside of it? Thank you for your videos they are greatly appreciated

Parabéns excelente vídeo

Dude awesome I've been trying to change clutch shoes but haven't been able to find a suitable clutch compressor tool

It is a better idea to press those parts together with some screw clamps an then screw the nut back on it. Because if you press not with the same force, you can bend those two discs... I did this mistake the first time, when I replaced the clutch... But the idea of loosing this Nut is really great! Greeting from Germany :)

Hi. Which Dr Pullay slideers do you recommend to Piaggio X7 300 ie (2011). My prio are as follows: 1. would like to increase max speed 2. Fuel consumption 3. Acceleration Thanks a lot!

Love the bird sounds

Do you happen to know what socket size for a Yamaha Prebug?

Awesome, thank you!

@MitchsScooterStuff

Жыл бұрын

Anytime!

Perfect Mitch.

@MitchsScooterStuff

Жыл бұрын

🙏🏼

Hi Mitch, You are great help with you’re videos, if I need maintenance for my Pcx , You’re the man. I have a Pcx 2022 , what size is the big nut holding on the clutch? Is it 39mm? Thanks again.

@chkhamis101

Жыл бұрын

Just a further update, found information from a another video. Socket wrench 39/41 mm. Torque 54 NM. Hopefully this helps somebody.

How many torque or NM when tightening it?

Hi guys how many MM for the honda ps clutch nut ??

penyebab getaran sampai ke body stang dari bagian apa saja selain rumah roller, apakah per sentricfugal atau lainnya

What is the size of socket wrench?

How to do it with the big socket I have the impact

hi really great staff you upload. What is the wrench size for the big clutch nut on a burgman 400 k7 with a 5 shoe oem clutch. Is it 54mm or 55mm??? Thanks in advance. Keep up the great work

@MitchsScooterStuff

Жыл бұрын

Hey I just looked at my socket.. it's 2-1/8" Thank you!

@alerikbga

Жыл бұрын

@@MitchsScooterStuff thanxxx!!

What size socket is that

1:18, there's a nice 39mm x 41mm combination socket available online, substantially cheaper than buying them loose.

@itsroads206

Жыл бұрын

Where?

what's the socket number?

Anung size po ung socket wrench thank you po

Do you live in Jurassic Park? Great video.

May I ask any reason for not using impact wrench?

@MitchsScooterStuff

Жыл бұрын

Impact wrench ok for removal... not for installation... it can over torque ... torque wrench is safer

@nameberry220

Жыл бұрын

@@MitchsScooterStuff can you use an impact wrench and then torque wrench for installation? without a clutch holder?

Excellent superb. R mohan Tamil Nadu.

I use a oil filter wrench and a large socket on an air wrench, no need to even take the pulley off 😎👍

@MitchsScooterStuff

Жыл бұрын

👍🏼👍🏼 I don't have an air wrench... maybe one day!

@danasymosky5609

Жыл бұрын

@@MitchsScooterStuff I use an electric impact gun from Harbor Freight. Very easy for removing the nut.

If you slip with the spanner you will need a toe truck 😃

socket size? online link

@ertelenmisdusler7235

4 ай бұрын

39mm

By the sounds of those two different dove species (Zebra & Mourning) I hear in the background I'm guessing you live in Hawaii?

@ryani5103

8 ай бұрын

From watching his other videos, I believe he moved to Hawaii not too long ago.

For free??

What is the socket size ?

@MitchsScooterStuff

26 күн бұрын

Hey, all scooters have different size nut, which scooter model do you have?

@mohommedzameer1655

26 күн бұрын

@@MitchsScooterStuff the same like your one ? Same nut but I don't know the size

Errr............ After you have tipped the scoot on its r/h side by placing the clutch holder tool against the floor, I suggest you find a long steel tube to slip over the holder tool handle and then let that rest on the ground somewhere up near the front of the bike !!! hahaha Sorry Mitch ! 😂

You did not write what size wrench to unscrew this nut

This can be extreme dangerous!!! If the nut jumps off everyone can loose an eye!!

Girls

You literally used all special tools lol

@MitchsScooterStuff

Жыл бұрын

I fixed the title... the special tool is compressor spring tool.. that I didn't use in the video... what tools are special in the video? Torque wrench, socket, breaker bar are common to use for many things... Compressor spring tool is only one time thing to work on scooter... 🤷🏼‍♂️

@wildeninja2836

Жыл бұрын

All normal for someone running an active scooter KZread maybe lol. The clutch wrench is the special tool. I specifically clicked on your CLICK BAITY title, assuming it would be how to remove it without that SPECIAL TOOL LOL.

@hsh.rlph.leblanc.131

Жыл бұрын

Se puede afojar la tuerca del embrague sin antes desarmar nada, sin sacar la correa. Poniendo un palo de escoba entre los radios de la llanta y la caja de transmisión - embrague para, que la rueda no gire, y entonces aflojar levemente la tuerca sin terminar de sacarla. Después desmontar todas las tapas sacar el variador, la correa y finalmente el embrague, para terminar de seguir los pasos de aflojar la tuerca finalmente, y de manera lenta, entre los pies, como hace este hombre. PD. Mejor ponte calzado por si salta el muelle no te reviente un pie.

I use impact screw driver with 34 mm socket with a thick cushion under the clutch setup to loosen and tighten the nut😊😊😊

@MitchsScooterStuff

4 күн бұрын

👍🏼👍🏼

Your genius m8

@MitchsScooterStuff

Жыл бұрын

🙏🏼

What's the socket number?

@MitchsScooterStuff

7 ай бұрын

variety of sizes depend on which scooter you have

@bobbyjohnson5637

3 ай бұрын

Honda elite sa50 2001​@@MitchsScooterStuff