To start comparing quotes and simplify insurance-buying, check out Policygenius policygenius.com/bourbonmoth

@karenmitchell6814

2 жыл бұрын

Head slap: when YT inserts their totally unrelated ad into the middle of your sponsor break! 🙄

@camaro6810

2 жыл бұрын

Dumb question from a rookie...why did you cut the faux beads on the MDF with the table saw? You have a nice cordless tracksaw, could you have just set the desired depth on the track saw and lined it up on your marks and zipped down the panel rather than fighting the large sheets on the table saw by yourself? Or is there something Im not thinking of....assuming you have enough track length to do that...

@youtukang

2 жыл бұрын

Nice 😍😍😍😍😍

@youtukang

2 жыл бұрын

@Laura Brown 😊👍

Awesome book that gives you step-by-step photos kzread.infoUgkxTNB_zFBSnTo_O1PqfVUwgi7ityw0JlKt and directions to make every day project. I can see myself making a few of these projects and giving them as housewarming and holiday gifts!

I have never seen someone write a 7 from the bottom to the top. Fascinating.

@jd-kr8bo

2 жыл бұрын

the L shape of the 4 was done bottom up as well

the trick i've used on the screws in the door technique is on one side you only put 1 screw, then from the end with the two screws, you can pick them up and it will spin on the single screw on the other end

@michaelwilmes8239

2 жыл бұрын

I wanted to say that too

Just spent all day watching older videos, to find a new one up! Bonus! I can't wait for tomorrow, I've been inspired to go out and make things this weekend.

@achillesbuilds2432

2 жыл бұрын

Hahahaha the weekend is hours away. Feelings change. Hmu when you're on the couch watching TV 😂. I know how this goes.

I’ve got a series of doors I need to build at my house I built myself…this video gave me inspiration and solid skills to practice. Thanks Jason!

What a better way to start the week-end...With a bourbon moth woodworking video.. Thanks Jason.

I wish you would of posted this 2 days ago. I just bought closet doors. It would of changed my mind on custom closet door. This is the best KZread video on closet doors.

Educational, entertaining and eye candy. One of my favorite channels!

This is on time. I am going to build doors for my closets over the winter. Thanks.

Beautiful set of doors. I love using Sherwin-Williams' Emerald...used it to spray some master bedroom cabinets that I built and the finish is as smooth as glass. Expensive paint, but well worth it.

Awesome stuff. Bonus is learning a really quick and easy way to do a faux vertical shiplap panel!

Just learned something new when cutting wide boards fought cut. At 1:47 you made the first cut at the outer edge, then closer to the fence, and then completed the by starting from the outer edge and back. I wouldn’t have thought of doing such a cut like that! Thanks!

AWESOME! You are giving me SOOOOOO many ideas! Thank you for your videos!

Once again, great video, great narration, outstanding skills! You have became one of my favorite channels to watch! Always entertaining and informative!

We have been meaning to paint the doors in the kitchen for some time now, so the screws on the end to hang from sawhorses is a really cool idea, thanks Jason!

When cutting the grooves in the panels you can cut two in each panel without moving the fence. Cut groove one from top to bottom, then flip the panel and cut number 7 from bottom to top. Cut number 2 and then flip the panel and cut number 6 and so on. Saves constantly measuring and lessens the chance of compound error.

@dennislnbrewing

2 жыл бұрын

I came here to make that comment. I figured someone else had this idea first. I was not disappointed.

You are so much fun to watch, and what a great project! Superb upgrade!

Totally love this video. Hoping to have my dream woodworking shop of my own this summer.

Love your stuff Jason! Both entertaining AND informative. The track saw can make an "easy peasy lemon squeazy" groove in door panels too.

perfect timing... I need to build 4 of those for our bonus room using barn door style track

Beautiful!!! Thank you so much for sharing!!

Looking forward to the bed frame build. I need to make one for my spare room

Make your own floor guides! It's so easy and they look so much better. You can match the finish.

Great idea with the grooves in the MDF! We are rebuilding our closet this winter and I may have to try this out. Thanks!

@SenselessUsername

Жыл бұрын

If the lines are evenly spaced, he could have saved 3 fence-settings from 7, by running each panel twice; once in each direction. Because groove nr 7 is as far from the right edge as nr 1 from the left.

Hi. Greatings from Norway 😄 Love your videos and projects. Did my own closet last month in a not to different way. A lot of good tips in the comment section her to, and mine is to use 3 screws. 2 in one end and one in the center on the other side. So you can lift and turn easy on the single screw. That way you do not touch the wet paint at all. Looking forward to the next vid. Have a noodle week.

I love to watch your woodworking videos with my dad

Nice build Jason,

I need to make closet doors very much like what you just made. Thanks for the video of inspiration. Now to clean the garage so I have enough room to make some doors.

I’ve got a $1M policy thanks to you and policy genius. Plus I’m inspired to make closet doors now.

They look great and I once helped a buddy replace all the doors in his house including closet doors. We made one mistake and it was that we replaced his hollow core closet doors with solid doors very similar to what you made. We noticed they weight difference but didn't think it matter much. A year later all of his rollers had broken. A few years later working at a contractor store I learned why. It seem most closet doors are sold as a kit and the roller set is just good enough to work with that weight of door so if you do change then it can cause it to wear faster. Just something to keep an eye on.

@jayp6990

2 жыл бұрын

Yeah, I was thinking the same thing.... 🤔

@steari

2 жыл бұрын

I'm pretty sure you're right. That would be a heavy front door let alone sliding closet door. It's a beautiful product but definitely needs some reinforcing. The previous doors must feel like foam in comparison.

Very Beautiful Work

Well I gotta say those are awesome looking doors and I think you do an awesome job at trying to tell everybody how to go about things and that doesn't happen with a lot of people! You taught me something today that I would've never thought of about cutting a little grooves in that to make it look like a shiplap or make it look good and I appreciate that because when you learn something every day it's a great day any day you can learn something new makes everything better at least in my little world so thank you very much truly appreciate that keep up the good work on your videos love them!

I was wondering about the colour choice, until I saw they matched the internal doors. Great video.

I like watching your videos because you do such good work. And you make me laugh.

Great as always. Love the shiplap look

That screw idea for painting doors is has just completely changed my timelines on painting....GENIUS!

Always great videos man! Too funny. You make it look easy, including lifting those things. MDF is HEAVY for certain. Thx for posting that.

doggo, "dad whatchu doin? oh just being a goof ball I'm good" hahaha

This looks great man 👍

You make great content and edits…and you are a great craftsman…..and they always crack me up.

Brother great job and quality work

I literally just did this (I bought the doors, solid wood). That looks exactly like the Johnson Hardware that was on my old doors. I tried to reuse them but the new solid doors were far too heavy. Johnson makes tracks for heavier doors and if you replaced hollow core doors I would strongly suggest upgrading the hardware. I also noticed that the handle you used looks exactly like the Emtek pulls that I bought too.

Very good video! Thank you!

Great project! Every time I see you use your saw cutting something big or on your last project with the shuffle board table I thin you need some of those Jessem TS guides. They really help keep wood up against the fence. I did the magswitch mount on my sawstop and highly recommend them. Thanks for sharing! Love being inspired by your videos.

@youtukang

2 жыл бұрын

Hiii sir 🙏🤝🤝🤝🤝

Great video, I like that you don’t swear they older guys in KZread

They came out awesome!

Great work!!!

Nice job!! Really beautiful job!

I recently did a similar groove cut on a narrow panel but these were horizontal. My saw is metric so only had to add 20 mm each time. Easy Peasy lemon squeezey.

I live your videos you inspired me to more woodworking

I love the trick with the nails thank you

And He was never heard of again after his wife got home and found the canopy on the guest bed chopped in pieces rip lol!! Great videos man

Yup, those turned out pretty nice

Regarding the screw trick for painting. Put first screw like you did close to the edge of door and the second offset from center only a few inches. This allows you to flip the door easily with one person. Grab the outer screw and just rotate it around the inner screw. You do need a little longer support doing it this way. Just make sure the second screw is not too close to center of the door could move unexpectedly but otherwise it will stay nice and stable.

Very nice, love your videos.

I need to go to bed, it is late here in Germany. But then this video comes up.. :D Very nice work!

That was a great video! The music used was groovy man, love it!

@21:30 -- So, you finaly came out of the closet...... Love the doors and your work!!!!

nice shop man, that jointer is no joke! highly recommend you add something grippy to the floor to prevent your feet from slidding!

Excellent I like it!

Absolutely fascinated on how you draw your "4's" starting from the bottom. Also the doors.

Surprised you didn't cut groove 1 then turn the board to cut groove 7 etc, 4 set ups instead of 7 ;)

@joni4757

2 жыл бұрын

I did think the same thing 😅

@JOJO-se5cm

2 жыл бұрын

I thought the same, but i think he did that to keep the lines parallel. So it make sense to saw all from one side.

@kevindadams

2 жыл бұрын

I was just about to say the same thing. #GreatMinds

@hansblonk1465

2 жыл бұрын

He also could start in middle and fixed spaces to both sides

@johnmetzger7185

2 жыл бұрын

Alternatively, could used a router with a Groove or V-bit and a straight edge guide...

I'm happy to see my Hedgehog featherboard and new push block in action. 💪🏽

@Bourbonmoth

2 жыл бұрын

🙌🏻🙌🏻

Nice easy project. Good idea. Looks great. I believe with I can do this. 🤔

Had to reload the way you draw a 4, not right or wrong, just fascinating!!

Entertaining as always.

Great, thanks.

I appreciate that you stained where the bedposts were before filming the last shot.

That is a fantastic idea with the screws for painting. As my French daughter in law has taught me, tonight I go to bed less stupid 🌞

Amazing

as usual this was awesome.. .............. yep awesome!!!!!!!!!!!!!!!!!!!!!!!!!!

4:13 While on a job sight doing some plumbing, the home owner was doing his own molding and was holding the cut the same way you are. He cut 90% through his arm. Since then I never crossed my arm that way while cutting.

Best content my man 🤌✨ immaculate

"I marked each board with an X, because that's what you do with treasure." That's gold, baby! Cracked me up.

Excellent Craftsmanship, really. Getting over a year long discomfort, going to take off the drop cloths to Man Tools and cut some Wood 🪵 Boys 🤑🤑 👍👍

The door is nice, but I'm more impressed that you were able to get those jeans on.

@Bourbonmoth

2 жыл бұрын

Paste wax

@achillesbuilds2432

2 жыл бұрын

@@Bourbonmoth 😂😂

Ur jus amazing 👍🏾🛠️

Cool trick with the screws for painting. You may want to try a slightly bigger screw directly in the middle to take the weight. Then use skinny screws at each end. Only 1 on each side. at one end the left and the other end of the door the opposite side to stop it from moving. Then remove the screws from the side and just flip it over using the middle screw as the pivot. Save your back!

I don't know if I'm here for the comedy or the woodwork and I'm ok with that.

@HepauDK

2 жыл бұрын

For me, I guess it's a little bit of both. :)

it's only 7 lines and since the symmetry you could run first pass and then run through other edge to get two cuts per adjustment for one sheet, then only 4 adjustments are necessory.

@2HME

2 жыл бұрын

I was gonna say this as well.

@tjben49

2 жыл бұрын

Was going to say the same thing. Great doors.

@tomas6700

2 жыл бұрын

I wasn’t going to say that. But, it makes sense.

@jtotheb-ip2hh

2 жыл бұрын

i was going to say that, too. did it once for a headboard and felt smart for a minute.

@vjenkinsdb

2 жыл бұрын

hahahha was thinking this too

Cool, sneaky tick, tilt table saw blade to 45 degrees to create a V groove

I like how you fixed the footboard, at least you have a nice shop to sleep in

Hey, our media room is that exact color!

I cheered when you cut that bed down to size!!

Damn cool doors!

Hey man, love your vids. Found you about a month ago, subbed, and love the videos. Your humor and woodworking abilities are fantastic. And love how you voice over after the fact. Btw, I am not a woodworker but am more of a regular handyman around my house. Dream of a metal shop and wood working shop when I retire. Kudos

Thank you for these videos!

Right there is why I love your videos. “This is why you can’t drink wine while doing voiceovers.” Beautiful doors!

Like the style of the doors, better than bi-folds. As for the bed, drill half inch holes, glue in dowels, replace the uprights and call it a day.

14:00 I would recommend using a much smaller square than that, to get the extra precision.

Since the center panels are symmetric you could have saved time on the grooves you cut for the panelled look on the table saw by cutting at both ends with the same position set on the sled, effectively halving the times you have to measure and adjust the saw.

@mtnbikeman85

2 жыл бұрын

Also could have used the track saw and it depth stop and not needed to pick up each heavy ass door 7 times.

Automatic pencils look like a real drag!

@Bourbonmoth

2 жыл бұрын

But you don’t have to sharpen them

Máš moj obdiv,súper.

I grooved an MDF panel once with a router; I clamped a board to it as a guide rail.

The guides are probably on one of these ships here in LA

🎼 Flat bottom boards, they make the closet doors square now 🎶

great build... I see a new bed frame in your future projects list. Just say'n...

Awesome self flip @ 19:10😲

I’d paint the door frames black. I personally think it would look better, but maybe that’s just me. Nice job on the doors. They turned out great!