We appreciate all your support. Please remember to subscribe.

Will never change break pads, but certainly gives me a visual of brake pads making it much easier to understands when my husband talks about brakes and what needs to get them fixed. Thanks for a great, educational video.

@JMRRebuilders

3 жыл бұрын

Well if you ever have to now you have somewhere to come and see. Besides your probably watching because this is such amazing content.

Should have mentioned the sockets sizes. Torque specs? Also brake caliper grease on the caliper slide bolts.

@ericjackson1819

Жыл бұрын

And jack stands

@JMRRebuilders

Жыл бұрын

Yeah, all good points, but honestly, we are not interested in being a complete how-to channel. We are more of a how we did it. I'm sure there are more through channels. Thanks for watching and commenting. we do appreciate the support

Thanks for the video, Im going to use it. I hope that Pacifica is not running around with its brake fluid fill cap open :-)

@JMRRebuilders

4 жыл бұрын

Yeah we missed that step in the video but not in real life. Thanks for the support and please check out our other videos. We appreciate the support and hope you remember to subscribe.

I think you may have forgotten or forgotten to show, how to put some lube on the center of the bolts that hold the caliper on so it can move slightly as the pads grab. Also maybe tiny bit of medium strength thread locker on the threads too for added safety? Just a thought, as i haven't had to do the front pads yet but will be doing the rear pads tomorrow on our 2017 Pacifica. Good luck with your channel :)

@JMRRebuilders

4 жыл бұрын

Hi Jk thanks for fhe comment. These are all great suggestions and thanks for adding them to the video. Good luck on doing your rear. Let us know how it goes. Keep getting after it brother

Great Video guys! When you jacked up the van did you use the hockey puck things on the pinch welds or do you just put the jack directly on the edge of the weld?

@JMRRebuilders

4 жыл бұрын

You can use both methods. We strongly suggest being cautious and finding the best spot since you will be under it. Also recommend jack stands Thank you for the encouraging words.

Can u plz advise which grease is best for caliper sliding pins ? When I bought brake pads for my 2019 crysler Pacifica , they sent small packet of grease. I guess that is only to be used for brakes but not calipers .

@JMRRebuilders

4 ай бұрын

Yeah if it is what I think lot of times it is for the back of pad to help with silencing the pads. Good luck

@hussainimca

4 ай бұрын

@@JMRRebuilders. Sure . I want to know which grease is best for caliper sliding pins

@JMRRebuilders

4 ай бұрын

Any anti seeze will do fine

Have you guys done a video on the rear pads? I can't get the caliper to go back on the new pads, and I'm pretty sure I've got the piston fully retracted. It's driving me nuts! Thanks.

@JMRRebuilders

4 жыл бұрын

We have not. Try using an old pad and a c clamp to compress it. Is it single piston or dual?

@KevinCookAtl

4 жыл бұрын

@@JMRRebuilders It's a single piston, but it's got the electronic parking brake on there too so it's one of those that you have to twist. I've twisted it all the way until it hit the stop! Are you supposed to press it with a clamp too?

@KevinCookAtl

4 жыл бұрын

I just tried that and that did the trick. You have to twist it in and press it in (covering the parking brake and the regular braking). I feel like an idiot now. Thanks!

@JMRRebuilders

4 жыл бұрын

Good to go brother. You are not an idiot. Most of the stuff I solved was from asking others and trying. Good job and keep getting after it brother. JMR NATION

What about the back of the Pacifica? Is it the same or does it have the dreaded drums?

@JMRRebuilders

4 жыл бұрын

The rear are disc. Thankfully the dreaded rear drums are going slowly into extinction.

How do you bleed the rear brakes on this. I just did mine and I can't get anything on the bleeder screw.

@JMRRebuilders

2 жыл бұрын

Hey brother normally I dont have to bleed after a replace job. However I am assuming you twisted the bleeder screw to allow it to be open. Also you might have debris or something in the bleeder causing a clog. Could remove and replace. Good luck. Not sure if this helps. We appreciate the support.

@jaimierobertson8804

2 жыл бұрын

@@JMRRebuilders I had to replace the calipers. Didn't know about the electronic parking brake. Damaged the caliper had to replace. Can't get wrench on bleeder with electronic components in the way. Can't find video on it either.

@JMRRebuilders

2 жыл бұрын

Oh ok then thats what i figured. Have to loosen bleeder screw. Seems silly to out it so you cant get to it. Can you get a socket on it?

@jaimierobertson8804

2 жыл бұрын

@@JMRRebuilders no I can't get a socket on it and it's a pain with the angle to get a wrench on it. I'm thinking I might have to buy some offset wrenches and try it that way so I can bleed it.

@JMRRebuilders

2 жыл бұрын

Yeah that is a option. Good luck

Often times Brakepad Manufacturers say to "set" the pads after installing by applying the brakes several times in a hard stop. Do you recommend this or think it can actually be detrimental? I doubt the professionals do this at brake shops.

@JMRRebuilders

4 жыл бұрын

I personally do the hard brake on everyone I do. Totally up to you but I guarantee a brake shop wont. Wed love a sub!

Do you have to de-activate the emergency brake?

@JMRRebuilders

3 жыл бұрын

We didn't but we only did the front brakes. Sorry if that doesn't help. Good luck to you

Brake pad tangs or "squealer" with give you a high pitch tone to let you know your pads are worn down to the point of replacement.

@JMRRebuilders

4 жыл бұрын

Thanks for the clarification brother. Also thanks for the support and comments

Are the back pads the same way?

@JMRRebuilders

4 жыл бұрын

No they are not. They have the built in ebrake. So you have to twist and press as you go. Good luck.

@dtran11

4 жыл бұрын

@@JMRRebuilders can you make a video of this. Thanks in advance

@dtran11

4 жыл бұрын

Or if you have a video from another car with same brake technology would work also. Thanks

@JMRRebuilders

4 жыл бұрын

We don't have the plans to right now but will keep this in mind.

@JMRRebuilders

4 жыл бұрын

It should be rather obvious once you get them off. Also I'm sure you could google it and find some examples

Your camera don't need to point at man face a lot; we want to see/watch the brake he replace... We can hear his voice rather seeing his face...

@JMRRebuilders

8 ай бұрын

Aren't you just a sparkling ray of sunshine. Thanks for comment and support

You guys never did actually show how to replace the rotors

@JMRRebuilders

4 жыл бұрын

That is because once we realized the pads didn't need to be replaced we saw no need in replacing the rotors.

@eifnhoj7722

4 жыл бұрын

Example this video is how to make a cake flour, egg , water,

@JMRRebuilders

4 жыл бұрын

Not tracking brother title says brake pads. Yes we mentioned we might do rotors but we clarified that we weren't going to because was not necessary

@eifnhoj7722

4 жыл бұрын

Then don't put it in your title of the video

@JMRRebuilders

4 жыл бұрын

Re read the title brother "How to replace brake pads . . . No rotors anywhere.

This video didn't help me as supposed to be. Not good at all

@JMRRebuilders

8 ай бұрын

Well guess your onto another. Good luck

Do you have to de-activate the emergency brake?

@JMRRebuilders

3 жыл бұрын

Yes we did. But we never did the rear brakes only the front.