Always a delight to watch and learn something new every video Phil.

@MirandaDetailing

Жыл бұрын

Thanks man!

a nice job Phil .& Miranda (let her talk too Phil) . :)

A good detail channel has to have a mix of products info, technique info, educational info and when that mix is done correctly it becomes entertaining and Phil your channel is hitting it out of the park 👍

@MirandaDetailing

Жыл бұрын

Thanks so much!! 😎👍🏼

Looks amazing Phill

Great stuff as always, Phil! Thanks for taking the time to post these videos.

@MirandaDetailing

Жыл бұрын

Thanks man! 😎👍🏼

Hey Phil and Jess another great video 👏🏽👍🏽

another awesome video!

Once again you and Jess did a remarkable job of paint resurrection and residue removal. Thank you,

@MirandaDetailing

Жыл бұрын

Thanks!

@tedlym.3390

Жыл бұрын

@@MirandaDetailing KZreads's spam bots hit your channel big time tonight using your name.

Hey guys absolutely love your videos! I always learn a couple things and they're just super enjoyable to watch. 🙌🏽

@MirandaDetailing

Жыл бұрын

Thanks man. 😎👍🏼

Bought 2023 hyundai santa fe last week. Did APC rinse, carpro reset shampoo,iron decon. Griots ceramic wash and coat. Used carpro DELUX to coat wiper cowl, headlights,lower plastic trim, front grill, rear taillights, windshield, rear wiper arm and glass. I didn't wipe off coating from textured plastic. Let it soak.

Nice video Phil 😄

Good job with the vids

Hi Phil. Derrick from vt here . Yup , quality control from the factory has gone out the window since covid . The worst part is that in many dealerships the detailers are pretty new so it puts them in scenarios that they really shouldn't be doing. I'm all in one the gyeon evo line. Love all there products. No issues whatsoever. Easy to work with, outdoor friendly and super high gloss . Keep up the great work . Take care .

@MirandaDetailing

Жыл бұрын

Hey man! Thanks for sharing! 😎👍🏼

Great work, the Accord came out gorgeous.

@MirandaDetailing

Жыл бұрын

Thanks!

Nice turnaround on the Honda phil. Typically il have some yellow .or gray & step up the refinement with a orange or white pad.

Hey guys! Always enjoy the full detail videos. What I especially like is how you mix up the different brands of products that are used. I like to know what’s out there, and this is how I pick up on them. I use CarPro’s Descale for a decontamination wash and in this video you used a Koch Chemie product. Always nice to have an alternative. Till the next one.👍🏻😎(As a P.S. I watched Jess use her iBrid, man I really want one but just can’t justify the cost. Oh well, maybe if I win the lottery😂)

@MirandaDetailing

Жыл бұрын

Thanks! Actually the mini polisher is this amzn.to/3SOFfXv Way more affordable!

@waynefromnewfoundland8740

Жыл бұрын

@@MirandaDetailing thanks for that. Looks promising. Gotta earn some Wifey points now. 😂😂

Phil rolling out with different shades on is awesome. Need a sunglass sponsor

@MirandaDetailing

Жыл бұрын

I wish!! 😎👍🏼

Really love the video and Gyeon’s products are a solid choice for protection! Results were awesome bru.

@MirandaDetailing

Жыл бұрын

Thanks man!

lmao 🤣 your wife " I can't talk??" 😅

@MirandaDetailing

Жыл бұрын

🤣😎👍🏼

@SteveFerr525

Жыл бұрын

@@MirandaDetailing lol 😂

Awesome video!

@MirandaDetailing

Жыл бұрын

Thanks man!

Awesome work on those nasty etchings and the wait time on the Gyeon coating was really impressive. I could not help but notice the lake country pad washer. In the past you said you were not a big fan of the pad washer and I would buy the washer if your selling it. Thank you for the video.

@MirandaDetailing

Жыл бұрын

Thanks. Yeah I actually do like this pad washer. when my pads pile up its easier to clean them with that. if its just a few though i still wash them in the sink.

nice job

Excellent job and a nice looking vehicle. Understated. Disappointing though that a new car would have so many paint defects. Not really good enough from the manufacturer.

Gyeon makes great products I just coated my leather interior with their Leathershiled

Phil, another great video. What protection did you apply to the glass?

@MirandaDetailing

Жыл бұрын

Hi. I used Gtechniq G1 bit.ly/3V7cYg7

Awesome video. Great job going the extra mile to get those etchings out!

That was alot of defects to fix on a new car. Turned out great. Gyeon got that very very nice gloss in their coatings. One Evo is so forgiving that you could have done the entire hood in one go.

@MirandaDetailing

Жыл бұрын

Thanks! 😎👍🏼

Hi Phil how are you, another great video. I would like to know which brand is the pressure gun nozzle which is blue in color, I would like to get one. Thanks keep up the great work! 👍

@MirandaDetailing

Жыл бұрын

Hi. Thanks. The nozzle is this bit.ly/3vyBtHQ I got the 25degree version. Use code Miranda10 for 10% off

Hey Phil. Great video, great content. I was just wondering if you throw away your towels that you remove coating with? Or is that what you were soaking in that bucket at the end and if so do you have any cleaners in that bucket?

@MirandaDetailing

Жыл бұрын

I don’t throw the towels out. I soak and wash them and if they are soft I reuse them on other details on the paint. But if they are crunchy I throw them out. But if you soak them with an APC or dawn soap then wash them they usually remain soft.

Excellent job! One thing about the new Gyeon Coatings, at least MOHS Evo, it does not harden like other ceranic coatings. Still a great coating, but dont excpect and marring resistance.

@MirandaDetailing

Жыл бұрын

I thanks! Really? I have found the new EVO line actually hardens my towels and applicator even if i soak them in water and apc! They are now harder and better than before! But honestly I never advertise ay coating, even the Gtechniq Ultra and Gyeon Infiniti coatings as being resistant to marring or scratch resistant or anything. I just don't want my customers getting the wrong idea.

@orthodox1717

Жыл бұрын

@@MirandaDetailing wow, interesting! I saw a video of a trusted detailer who showed his mini suede applicator cloth not hardening after application of MOHS Evo. 🤷🏻‍♂️ I think that’s very smart you do not advertise coating as any type of scratch resistance. I was referring to possible wash/drying induced marring. :)

@MirandaDetailing

Жыл бұрын

Yeah Next time use the coatings I'll save the applicators and towels and show them. Thanks for sharing man!

Phil: Great Video, when you first started your detailing business, how long did it take for you to be comfortable with doing this kind of service?

@MirandaDetailing

Жыл бұрын

Thanks. We started polishing about 2 years into our business. Another year or two and we started to dial in our process and methods. Time, lots of practice, and talking to other detailer's has taught us well.

Hello Phil. I have a SPTA cordless polisher and one of the batteries doesn't seem to want to charge anymore. Can you direct me to were I could buy a couple more 12v rechargeable batteries for it. Thank you for your videos. You have inspired me to stop doing mobile detailing and I have my own home shop now and I do this full time. Thank you!!!

@MirandaDetailing

Жыл бұрын

Hi. So I upgraded to these amzn.to/3e1twp4 also they need this charger. amzn.to/3RxRNAW They work way better! More power and they last longer

Love Gyeon products 😁👍

@p8rdm

Жыл бұрын

Hi Phil, just wanted to let you know I had a reply from you asking me to contact you directly, I’m guessing it’s a scammer 🤔

@MirandaDetailing

Жыл бұрын

Yes it is. They stole my logo but used a weird TEXT and random symbol name. You can Ignore it. Thanks man.

Amazing video/product review/tutorial good friend.

Hey Phil so if I use panel prep after nsp's will that take away the residue? Or does that defeat the purpose of using nsp? Thanks! Another good video!

@MirandaDetailing

3 ай бұрын

Hi. It will pretty much defeat the purpose. Even a damp towel with just water will remove the residue without compromising the primer.

Hello wats the apc foam you recommend used with ik pumps?

@MirandaDetailing

Жыл бұрын

This time around I used Super Clean 1:10. But I have also used other apc's and strong snow foams kzread.info/dash/bejne/lqBlmK2DqayXppM.html

What brand of that new green polisher you been using ?

@MirandaDetailing

Жыл бұрын

It's this one. bit.ly/3fDraNG

Great video. How much that job would cost for a 3rd black suv in condition

@MirandaDetailing

Жыл бұрын

Hi. Thanks. OUr 1-2 year coating services start at $1200. For a large SUV usually around $1300-$1400

What are you soaking the Kirkland towels and applicator in after use? Do you launder them as normal after soaking? Does that salvage the towels or are they demoted to less intricate work? Keep spreading that knowledge, your content is excellent.

@MirandaDetailing

Жыл бұрын

Hi. Yes I soak the towels with dawn or a few oz of APC. Then I wash them and check them for softness. Sometimes they crunch up. But often they are fine to use on regular details that we don’t polish.

@omargonzalez-uw5ow

Жыл бұрын

@@MirandaDetailing You have inspired me to apply a ceramic coating on my vehicle. I ordered the Technicians Choice coating because it looks easy to use. How many towels do you use to coat an entire full size truck? I have the Kirkland mf towels and I love em. Thanks for the reply and all the helpful videos you post.

Is there a link for the coating savers?

@MirandaDetailing

Жыл бұрын

The Gyeon ones I’m using bit.ly/3RMJuBq

Great work Phil! The accord came out awesome. How many times do you typically go back and forth when wet sanding spots like those? Is it something where you shouldn’t be able to see the spot anymore while you are sanding it or just do a few passes? Thanks man.

@SteveFerr525

Жыл бұрын

That's a tough question. not only is that a very delicate thing to do because you could burn threw but I would suggest practicing on a trashed body panel from something out of the junk yard. I'm sure Phil may definitely be able to give you pointers tho

@SteveFerr525

Жыл бұрын

That's a tough question. not only is that a very delicate thing to do because you could burn threw but I would suggest practicing on a trashed body panel from something out of the junk yard. I'm sure Phil may definitely be able to give you pointers tho

@23dothedew

Жыл бұрын

@@SteveFerr525 it always looks so easy when I see people do it. I have the 3000 grit sandpaper and RID Styx. I would probably just go back and forth 3 or 4 times and see what kind of result I got. It does make me nervous though lol

@SteveFerr525

Жыл бұрын

@@23dothedew yeah dude, 3000 grit wet sanded very lightly and right after polish

@23dothedew

Жыл бұрын

@@SteveFerr525 I think I just need to mentally accept that if I mess something up I’m gonna get the hood repainted lol

What in that bucket, where you put the dirt towels Awesome video

@MirandaDetailing

Жыл бұрын

Just Dawn and water so the towels can soak before we wash them.

@moisesperez3693

Жыл бұрын

@@MirandaDetailing can you do that with the towels that you use for ceramic coating ?

Great video , one question i had a vehicle that had a coat and is near end of shelf life just just minor marring and one area with light swirl, i was wondering if i can just wash decon and use something like gyeon primer and coat it , the primer would be able to correct the micromarring ? Because is really really light . Also if o have coat on trim can i just do the same procedure and reaply no need to fully remove the coat? Best regards

@MirandaDetailing

Жыл бұрын

Hi. Great questions. Yeah you could totally use a primer polish like that and re coat it. Even Dr Beaselys NSP polishes wold be even better. for the trim usually just an IPA wipe and re coat is all that needed.

@luiscaldeira7458

Жыл бұрын

@@MirandaDetailing thanks for the reply , i dont really feel contamination with bare hand i was thinking in do a iron and tar decon and then primer and coat with one evo would that be a nice process? Best regards

Think your wife is the unsung hero of your videos Master stroke having her involved

@MirandaDetailing

Жыл бұрын

Totally! She’s a BOSS!! 😎👍🏼

i am doing mobile detailing outside do you prefer ceramic coating ? in the netherlands it can rain any moment.

@MirandaDetailing

Жыл бұрын

When we weee mobile we didn’t offer ceramic coatings because it’s too risky to apply them outdoors.

What make is that green polisher?

@MirandaDetailing

Жыл бұрын

Its this bit.ly/3fDraNG

Hi Mr & Mrs Phil, what is the APC rinse that you use as step 1?

@MirandaDetailing

Жыл бұрын

Hi. We had Super Clean 1:10 in the IK foamer.

@inthbiz57

Жыл бұрын

BTW the more Phil Flubs at the top of each vid absolutely makes our day out in KZread land. I think it’s a game changer for your channel. None of the other guys are doing it. I think it’s GOLD! A little bit of humor goes a long way especially when most everyone else is so serious. Keep it up.

@MirandaDetailing

Жыл бұрын

🤣😆. I’ll make sure to keep adding those in there! 😎👍🏼

what did you use on the glass?

@MirandaDetailing

Жыл бұрын

I believe we used Dr Beasleys Glass Coating on this one.

9:13 what causes these defects? because my wife have several on her car and its only on the top surfaces. The hood and the roof

@MirandaDetailing

Жыл бұрын

Could have been caused my bird poop or bugs etching into the paint.

sir, for the shampoo in ik former the contents are the same as the foam cannon..?

@MirandaDetailing

Жыл бұрын

Hi. Nope. For our pre wash or apc rinse we usually just use Super Clean or other APC diluted 1:10 in the IK foamer.

@VegaArmor-io1fd

Жыл бұрын

Thanks..

Have you guys tried wash chems pro 50 and pro 100 on amazon?

@MirandaDetailing

Жыл бұрын

Nope. Haven't heard of it.

@CalabreseAutoDetail

Жыл бұрын

@@MirandaDetailing its a high alkaline cleaning soap, I picked up a fleet wash client and have been foaming up their vans with pro 50. Touchless. I think you guys could use it in your IK for a prewash.

Do you reuse the towels that you use for wiping off the coating? I noticed you put them in a bucket.

@MirandaDetailing

Жыл бұрын

Hi. Yes we do reuse them. We soak them and wash them. It we always check them to make sure they are soft. But we don’t use them for coating removal again. We will only use them on other details in which we are not polishing.

@AttentiveFinish

Жыл бұрын

@@MirandaDetailing I see. Makes sense. Thank you sir.

i used the new can coat a few weeks ago and it was super tacky and not at all similar to the previous version , I'm hoping it was just some weird factor that day but i have yet to pull it back out and retest it

@MirandaDetailing

Жыл бұрын

Hi. How did you apply it? I found that just a few mists close into the towel and applying it fast and evenly in each panel is the best method. I used to apply it like a traditional coating and it was terrible!

@glyndonsprofessionaldetail7429

Жыл бұрын

@@MirandaDetailing every time i have applied it previously it was the standard coating method and it was always pleasant , but that was with the old formula , this one i misted it on a ufo style applicator i think

@MirandaDetailing

Жыл бұрын

Ah ok. Try doing what they show here kzread.info/dash/bejne/mXmTyMqnntKbZsY.html

@MSeanMcClellan

Жыл бұрын

@@MirandaDetailing I just applied cancoat evo to my wife’s Odyssey and had similar results. I did it just like Esoteric’s video you linked and it was nice and easy to wipe off.

@MirandaDetailing

Жыл бұрын

Awesome!

Hey Phil! So you sell that coating as a 1 year? Because I see it advertised as 24+ months protection

@MirandaDetailing

Жыл бұрын

Yeah we do. It used to be a one year coating, but now the EVO line has doubled the durability. So the customer is getting more than what they asked for on this one! 😎👍🏼

@sirilolemus8188

Жыл бұрын

@@MirandaDetailing got it! Thank you.

What grit SP you using to wet sand the dust nibs?

@MirandaDetailing

Жыл бұрын

2500-3000 grit.

@garybroadwater

Жыл бұрын

@@MirandaDetailing appreciate the info! Great content . . . . Keep it coming sir!!

Gyeon EVO coatings are so easy to use & so far, durability is great! I'm wondering why you are not using Gyeon Primer?

@MirandaDetailing

Жыл бұрын

Yeah they are! With Gyeon Primer you have to wait 24h before applying the coating. the Dr Beasleys NSP polishes can be coated over right away.

@ILDetailing

Жыл бұрын

@@MirandaDetailing well, you know you can use Gyeon prep 15 minutes after primer. The longer the berrter, but still, Gyeon primer is my goto on a daily base

@MirandaDetailing

Жыл бұрын

Yeah I know. I wanted to eliminate that Panel wipe step completely. Some soft paints just like it at all. That’s why I love the NSP polishes.

@shaunwolfe7666

Жыл бұрын

@@MirandaDetailing WaxedShine also has a Primer where you can coat Immediately afterwards as well. It’s a fantastic product, super easy to use with great clarity and gloss. If you haven’t tried it, I highly recommend and let me know what you think of it.

@MirandaDetailing

Жыл бұрын

Awesome! That’s for sharing that!

How dare you use kirklands 😂. They work just fine. Were you using the non Evo version of One when it was tacky? I have not used One Evo but it looks similar to Pure Evo. Car looks great and the NSP’s are great. They work with any coating variation. I have been polished out glass using them and coated the glass.

@MirandaDetailing

Жыл бұрын

🤣👍🏼. I was using the EVO. I’m didn’t really feel tacky, but it doesn’t feel super slick either. I refer to it as a smooth feeling.

Can anyone help with the name of the tool he uses to inspect the paint? What is the name and where can I find it?

@MirandaDetailing

Жыл бұрын

Hi. This is the microscope we used amzn.to/3EcIpQh

How many vehicles does that bottle of One last you?

@MirandaDetailing

Жыл бұрын

We did about 3 vehicles with one 50ml bottle. Granted they where smaller vehicles also.

Where can I get that apron? Is it made of microfiber or something soft?

@MirandaDetailing

Жыл бұрын

This is apron I use. amzn.to/3V3qVeY

@jamiesdetailing

Жыл бұрын

@@MirandaDetailing will definitely buy it with your link! I currently am rocking a canvas one but really like the half apron style better. And it is microfiber vs canvas and has larger / more pockets. Thanks a ton!

Need to try HyperClean Uno (1yr) 🔥

@MirandaDetailing

Жыл бұрын

I have a video coming soon using Duo. I have Uno that I will be using soon also.

@wesoakes

Жыл бұрын

@@MirandaDetailing fantastic. My personal favs. Tre is also a monster.

Question kind of smock do u use ?

@MirandaDetailing

Жыл бұрын

Hi. Smock? What do you mean?

@onpointdetailingbrandon6119

Жыл бұрын

You're apron

@MirandaDetailing

Жыл бұрын

Ohhhh. it's this amzn.to/3zW4uj2 😎👍

Oh that looks nice. Honda paint is kinda of a pain in my experience. I see you used a combo of yellow and orange pads. Any reason? How long did it take you to coat whole car? Great work. Hi wife.

@MirandaDetailing

Жыл бұрын

Thanks! Yeah we are finding any of the new vehicles paint is annoying! Covid paint sucks! 😂. No specific reason for pad changing. just grabbing what i had in the cabinets. The coating itself can take me about an hour to complete.

197th like 🚙💨

If you get a bag of crunchies, just put them under the kitchen sink to clean the house with. 👍

@MirandaDetailing

Жыл бұрын

Very true! 😂😎👍

It's such a bummer when I have to show a customer those type of defects in the clear on a new, or relatively new car, and tell them it's beyond reasonable detailing options. Sanding is sometimes an option, but opens a can of worms. Most people don't get the "responsibility" of owning a dark colored car, and the typical bird dropping threat. Remove them asap when you see them!

@MirandaDetailing

Жыл бұрын

Very true! Thanks!

wait... did you say kirkland towels dont scratch??? woe what

@MirandaDetailing

Жыл бұрын

Yup. I here that all the time and yet I haven’t had problems with them. What I have discovered however is that sometimes a package of towels will get pst quality control and they will be crunchy feeling. I just return them and get a new package. Never had issues even on soft black paint. kzread.info/dash/bejne/hYV1qdOhobmsnaw.html

@bread7289

Жыл бұрын

@@MirandaDetailing you know ive bought 2 packs already. I use them for interior and I sell them individually (if they want one for some reason), I've noticed like how soft they are, its a true 80/20 blend not a secret mix blend, but I mean some are like really soft and some are kinda not crunchy but not "as soft". Very crazy. I find alot of sales on amazon prime, of like $5 off, $10 off, mixed with subscribe and save 30% off, I get a pack of the chem guys yellow towels for literally $1/towel. They have a pretty decent GSM I believe 360~. But I do love how cheap and just grab n go the kirklands are

With vehicles being so overpriced 1 would think should have nun.car came out awesome

Black cars ugh but they keep you in business

@MirandaDetailing

Жыл бұрын

I know right?! Very True!

I don’t like that polish.

@MirandaDetailing

Жыл бұрын

I didn’t like it at first either. Now I don’t use any other polish before coatings!