A quick repair of a Dyson hairdryer. This one had a couple of small faults that didn't take too much to repair! The hardest part was finding the right sized screwdriver!
Жүктеу.....
Пікірлер: 19
@Stormas300015 күн бұрын
After 2h of work i finally repaired my hd03, overheating 3 red dots blinking and it was not by cleaning the filter or interior. Hope i never have to open it again what a pain in the ass.
@wickedkool705 Жыл бұрын
So I had to disassemble my wife’s Dyson and the end cap with hot/cool buttons is a pita to get it to move. How much prying force did you end up using to separate from housing? Or am I missing something? You went off camera then it was apart. Or is it not worth the time to pull apart? Thanks for video.
@Wilko159
Жыл бұрын
Once the buttons and all the screws are removed it just slides off
@wickedkool705
Жыл бұрын
@@Wilko159 we’re talking about the purple cowling? That’s what I’m trying to pry apart.
@Wilko159
Жыл бұрын
Sorry, yes that but just pulls off, it does take quite a bit of force and several plastic levers!
@user-hr2bj9pd5q4 ай бұрын
Could you turn on the hair dryer prior to fixing it? Or was there any light turning on? I’m considering trying to fix my hairdryer but mine does not turn on at all
@Wilko159
4 ай бұрын
It would already turn on, so you may have a different fault I think. Although if you disassemble it you might find something obvious like a broken wire or connection
@marianatorresdearaujo8441 Жыл бұрын
Olá pq ele vem com essa tomada ? E para que serve o botão vermelho e o outro botão tbm por favor ?
@Wilko159
Жыл бұрын
The red button adjusts the temperature. The other button adjusts the fan speed (air flow).
@osmoclaphanger10 ай бұрын
What size,type of screwdriver did you use please?
@Wilko159
10 ай бұрын
I'm not 100% sure. There are no markings on it. I'll try to measure it today.
@beaker656
8 ай бұрын
a T6 star bit for the circular metal filter. The metal filter always clogs up on the inside, just needs a wash and will solve the overheating issue due to lack of air flow
@anouska03 Жыл бұрын
Hi do u fix hairdryers ?
@Wilko159
Жыл бұрын
Hi, I fix a bit of everything but really only for friends and family as I don't have time to do much more.
@tl616411 ай бұрын
The overheating is clearly a design flaw and has little to do with dust. It's a shame Dyson don't take care of it.
@jackkitley
4 ай бұрын
True, i removed the silver filter and left off. Works now without shutting. off.
@bemicecheung420
Ай бұрын
I Agree with you totally. Dyson told me the product is discontinued and they cannot fix it. My hairdryer only lasted 2 years. I am not going to buy Dyson again.
Пікірлер: 19
After 2h of work i finally repaired my hd03, overheating 3 red dots blinking and it was not by cleaning the filter or interior. Hope i never have to open it again what a pain in the ass.
So I had to disassemble my wife’s Dyson and the end cap with hot/cool buttons is a pita to get it to move. How much prying force did you end up using to separate from housing? Or am I missing something? You went off camera then it was apart. Or is it not worth the time to pull apart? Thanks for video.
@Wilko159
Жыл бұрын
Once the buttons and all the screws are removed it just slides off
@wickedkool705
Жыл бұрын
@@Wilko159 we’re talking about the purple cowling? That’s what I’m trying to pry apart.
@Wilko159
Жыл бұрын
Sorry, yes that but just pulls off, it does take quite a bit of force and several plastic levers!
Could you turn on the hair dryer prior to fixing it? Or was there any light turning on? I’m considering trying to fix my hairdryer but mine does not turn on at all
@Wilko159
4 ай бұрын
It would already turn on, so you may have a different fault I think. Although if you disassemble it you might find something obvious like a broken wire or connection
Olá pq ele vem com essa tomada ? E para que serve o botão vermelho e o outro botão tbm por favor ?
@Wilko159
Жыл бұрын
The red button adjusts the temperature. The other button adjusts the fan speed (air flow).
What size,type of screwdriver did you use please?
@Wilko159
10 ай бұрын
I'm not 100% sure. There are no markings on it. I'll try to measure it today.
@beaker656
8 ай бұрын
a T6 star bit for the circular metal filter. The metal filter always clogs up on the inside, just needs a wash and will solve the overheating issue due to lack of air flow
Hi do u fix hairdryers ?
@Wilko159
Жыл бұрын
Hi, I fix a bit of everything but really only for friends and family as I don't have time to do much more.
The overheating is clearly a design flaw and has little to do with dust. It's a shame Dyson don't take care of it.
@jackkitley
4 ай бұрын
True, i removed the silver filter and left off. Works now without shutting. off.
@bemicecheung420
Ай бұрын
I Agree with you totally. Dyson told me the product is discontinued and they cannot fix it. My hairdryer only lasted 2 years. I am not going to buy Dyson again.
What the fuck is Cocktail Stick?
@Wilko159
4 ай бұрын
amzn.eu/d/8vm4gCE