Have to put some Tundra wheels on it! Looks nice and did great in the windy conditions with an Ace pilot!

up elevator keeps prop out of grass..let the pressure off when wheels start rolling.. hope you have fun Andrew !!

@reignman0311

3 жыл бұрын

Facts, It's a taildragger, we run the whole runway(paved) where we fly before getting it up in the air

Your friend was correct about how well they fly. I have a gas model H9 which goes inverted w/o touching the elevator. I have never had a plane do that before.

Your idea with the cameras going to look sweet in that Sir Andrew take care

I have the Thunderbolt and love it..Nice flying in that wind..:)

My all time favorite plane 😍

wow, Andrew newton with a warbird, nice one mate

Thanks for the video... great job

Dynam models look and fly great, and are value priced. That being said my experience with the Grand Cruiser was rocky to say the least. Not going into it here, but I left a lengthy review on the Motion RC website.

Awesome!

You did really well with that windy flight, it’s a shame that QC is not as it should be sometimes.

I’d love to get a mustang one day. I don’t think it’ll be the Dynam though, as I need to remove the wing each time for transport, and that win attachment didn’t seem too great. Its a shame as everything else looked great.

I just maidened with a Turnigy 2200mAh 4S. It weighs 38g more than my Zippy 2200mAh 3S which makes the CG just right. Thanks for the great video Andrew.

@AndrewNewton

4 жыл бұрын

Nice one. I love flying my belly lander version

Nice video again! Not a fan of war birds either. I love belly landing twins. I'm impressed that you made it fly so well.

@AndrewNewton

4 жыл бұрын

Just today I took it out for some head tracker FPV. It's a lot of fun that way

WooooH!! haha, you fly close to the stall Andrew! Ive been watching the P51 for a long time, I have a few Dynams, Cessna 1300mm, and the at6 1400mm the cessna fly's like a bixler, and the at6 fly's like it wants to stall, it has to be flown at 75% throttle ALL the Time or it drops the wing, Dynams aren't perfect but they are reasonably priced great vid thanks for sharing :-)

@AndrewNewton

4 жыл бұрын

Too slow as usually. Faster now as a belly lander and 4S

@mattm.davoudi5583

3 жыл бұрын

@@AndrewNewton Do I have to change the ECS for a 4S? Could you share what 4S battery you are using on this thing? Thanks

Hi Andrew, just received my model today 2-3-2020 main wings are my problems the main spar covers have not been fitted properly . I can see the wires down the holes so the cover is not flush with the wing , got one off ,the wires are not in the slots or secured in the slots ,one wheel leg is loose too . I'll get it sorted but for this price £175 it should be better . Always like your vids ,keep up the good work . Graham

@AndrewNewton

4 жыл бұрын

This is not a well made model but has potential. Mine is a pure belly lander now with fpv. It does fly well

Do you recall what size screws you found to work for the wings? I'm having trouble finding a PA2.3x25. (The originals are PA2.3*20 according to the instruction sheet). Thanks Andrew. Appreciate all you do for the hobby.

@AndrewNewton

4 жыл бұрын

Probably 35mm. Thanks Jay, just sharing the fun

Yup, port is red (like the wine) Also, "port" has the same number of letters as "left" : )

@MrFlyingSquirl

4 жыл бұрын

My mam always said "if you drink all the *port* there's none *left*, and port (the drink) is red"

I've got the unique models 1200 mm p51 (actually 2 that I bought off a mate ) one was brand new, never flown , the other had flown ,crashed and had been repaired when I got it . I decided to work the used one for a bit just to see how it performed and when I thought it didn't have enough thrust I put a 14" two blade prop on it and the first attempt to fly it resulted in an unrecoverable left turn closely followed by kissing the dirt with surprisingly the rudder coming off being the only injury . After some repairs I made a second attempt a few days later and it got a few inches above the ground ,entered the same left turn again but because it was so low it tore the mains off the retracts as they were only made of nylon. Starting to surmise that the left turning tendency is a considerable torque reaction from the probably oversized prop and lack of sufficient airspeed. Subsequently I've decided to put the used one to bed for the immediate future and build the new one but this time I'm going with the 10*8 four blade prop to see if that can reduce the torque problem . ?..we'll see..Like you we aren't blessed with a particularly good landing strip and it looks like a balancing act with the elevator during the initial part of the takeoff run at least until it builds up sufficient speed but that's tail drag gears for you

@AndrewNewton

4 жыл бұрын

It's a belly lander now on 4S, much better

@MickB235

4 жыл бұрын

Andrew Newton How do you contend with the scoop in that configuration? Im thinking about running mine on 4s but need bigger esc for that

@AndrewNewton

4 жыл бұрын

I sliced the scoop off to give it a flat bottom, and using a 2 bladed 11 x 6" prop. Video coming soon.

Andrew, what of that astroturf strip right there in the field? Needs a bit of pruning, I think, but is that not what it's for? Too short, or...?

@AndrewNewton

4 жыл бұрын

Cricket pitch. Carpet on concrete

Buy some yellow paint for those prop tips. Pour a little pain in the cap of the bottle and you will get a matching level on each tip. It is a shame that your kit was defective. It tends to make people think that the same could happen to them.

Do you have to put a lot of weight on the nose of the plane to center the center of gravity? Thanks

@AndrewNewton

3 жыл бұрын

Bigger battery usually does the trick

Wow! You had some significant wind to fly that Mustang in and I know how difficult that makes for a Maiden Flight. I was surprised at how floaty the Warbird was. It must have really light wing loading. See you in the Air!

@AndrewNewton

4 жыл бұрын

Slightly tail heavy and flying too slow. It handled it but didn't look right. It's now a 4s belly lander with head tracking FPV

hello all right i liked this dynam p51 plus o Brasil (CN) This warehouse can not ship to your location.

Hi there. I have the 1600 version and the quality is also crap. Within a few months all the foam bends, sags and warps. I have the corsair and it's the same. Personally I would not waist my money on these foam planes 👍

@jboycs5483

4 жыл бұрын

Warps and sags within months? Really? There is plenty of fun to be had with foamies, they have their place being so much cheaper and fixable. I have a few foam planes that are years old that show no signs of "warping and sagging" , I do have a couple balsa planes that have loosened covering and warped wings though. Nothing beats a 'pro' plane but not everyone wants some awesome thing they can't afford to crash

Nice aircraft. Hey you had a smooth runway already there why didn't you use it instead of the grass LOL Happy Flying

@AndrewNewton

4 жыл бұрын

Strong cross wind. I have managed some take-offs down the cricket pitch since this flight.

It does look a tad tail heavy huh? Dynam could be an awesome manufacturer if they cleaned things up. I like their line up a lot and once you get all the persnikety problems out of the way they usually fly well. I wonder why they don't try harder to make everything right?

@AndrewNewton

4 жыл бұрын

Yeah, tail heavy and flying too slow.

How to I connect the prop I have this thing that I need to push in and I f it’s not hard enough the prop flys off do you have any tips

@AndrewNewton

Күн бұрын

Mine had a nut on the front that needed tightening. Have to lock the motor somehow (I used a screwdriver jammed in from the side) to get it tight enough.

Only Dynam P-51 I’ve seen w/upside down stars & bars. And the box was a Grover Edition, you got a yellow one w/red spinner. Did you buy this plane or Dynam give it to you?👍🏻😳

@AndrewNewton

4 жыл бұрын

Banggood gave it to me for the review. Seems to be a mix and match version. It's now a 4S belly lander with head tracking FPV

Yay! "P-51D Muskrat! Caddy shack in disguise!" (With apologies to 'Empire of the Sun'...)

Definitely looked like it was a little tail heavy, looked pitchy

@MrTimmyGT

4 жыл бұрын

@@oo-oh3wy lol well yea

@AndrewNewton

4 жыл бұрын

Yes needed a bigger battery but no space for it

You'll have to fly it upside down to fix the nav light issue.

@RobisonRacing68

4 жыл бұрын

LOL!!!!

@AndrewNewton

4 жыл бұрын

Hmm, maybe

Yes a good looking plane! Nav lights were fine mate you were just looking at them from down river!!??))

Seems to be better when you fly faster. Landing on the grass is terrible indeed. Maybe a wheel change is better Even so I liked. Too bad Banggood doesn't ship to Brazil

@AndrewNewton

4 жыл бұрын

Not to Brazil? That's crazy

Good looking plane, & you fly it well. We all know that you can fly a cardboard box! I prefer to pay a little more & get a better quality product. Every review I’ve seen of Dynam planes has a list of faults.

Fly it like a fighter plane not like a glider do some rolls and loops if you want to enjoy your war bird

@AndrewNewton

4 жыл бұрын

Yes I do fly too slow.

nice but see looks a little tail heavy

For the same price you can get the Arrows 1100mm P51, and is a far better quality.

@AndrewNewton

4 ай бұрын

Thanks, good to know

the way it flies to me looks like a tank with wings...

@AndrewNewton

4 жыл бұрын

Haha yes, flying slightly tail heavy and slow. Much better now as a 4S belly lander

What was right with that plane? Just kidding, but at the end average chinese quality or what they consider quality. Pretty stupid if they even do not double check shippings to you to avoid negative surprises + attention. I'll think I'll stay with the volantex kits.

Истребители это что то особенное.

I skip any Dynam product, I equate it with low quality. You get what you pay for and it is proven time and again with this company in reviews from different people.

This dynam p51d is a poor plane out of the box. rolls left at take off, so take off very slow. Also wings bounce for reinforce wing with fabric tape end to end. Too easy to break prop so go 2 blade and belly land. Retracts are cheap and bend/break so easy. I would not recommend this plane to a beginner or early intermediate.

@mattm.davoudi5583

3 жыл бұрын

What would you recommend instead? In this size.

My new P-51D can't take off on run way without roll over. I'm going to try half throttle hand launch. So far I hate this plane. Prop and Nose cone are terrible. Assembly screws were terrible. Foam soft. I have a Dynam Seawind I love, but this plane is junk. I hate when I waste money.

@AndrewNewton

4 жыл бұрын

I love my extensively modded belly lander now, but I agree it's not well designed as it comes.