Love your straight forward videos. You are very thorough and not a bunch of extra unnecessary fluff. Thank you!

Now I have a purpose for all of my leftover white tiles!!! Thank you!!

Thank you! I'm also learning alot in the comments! You are an excellent teacher!

I LOVE your videos! I can't wait to get started on some of my own!

Great video. I have seen the tiles at Home Depot and wondered if this would work!! Can't wait to try it. Thanks for your time. really appreciate it!!

Very informative and detailed. Thank you.

Thanks Roger for another fine tutorial. You could have easily been a shop teacher. But I'm sure electricians make more money! Love your stuff!!

thank you again for a great tutorial you are one of my favorites

Thank you for another fine video I have tried the laminate and only had about a 25% success rate I think I'll be trying the polycrylic next

Thankyou, these are super cute. Keep the videos coming.

thanks it was great. was going to do some tile.

Thanks for the informative video

Thank you for sharing this video

You are the best

The laminate I use is very vibrant,

Great video. For laminate eight minutes is the minumum time for it ot bond and it's not coming off. And tiles come out vibrant

Hi Roger! Thank you for your video. Is there any chance that you could demonstrate applying a coating of polyacrylic on a ceramic tile sublimation? I hoping to make one, and feel what that feels like (what kind of protection it provides). Heck, if you have an example laying around, I would love to buy it so I can get an idea faster. Looking forward to more videos, and hearing back from you.

I tried laminate and failed miserably and wasted several tile. going to try the vinyl. Seems to work awesome!

I tried the laminate on tile before and that was definitely an epic fail. Now I have a good use for my 25 yards of 651. I’m happy to see you got yourself some new gloves.

@rogersshop

2 жыл бұрын

Gloves for me can be tough since I wear a size 11. These run big, so a 10 fits perfect and the heat resistance and grip is excellent. Not cheap, but worth it! I'll be doing a review on these soon.

@heathergomos882

2 жыл бұрын

@@rogersshop I have the opposite problem. I have really small hands and can wear kids gloves, so even the women’s heat-resistant gloves are huge on me.

@desparzaification

Жыл бұрын

@@rogersshop Laminate ia 8 min minumum to bond

Love ya videos. Wish you show how u cut the corners out of the vinyl one

This has been most helpful! I have a Cricut easy press. Do I still put the picture down?

When u first put tiles on heat press u mention u put down parchment paper...would butcher paper work the same ?? ....love the way u simply things ....u r my favorite instructer !!

@rogersshop

2 жыл бұрын

Yes, butcher paper works the same, and I do use both, from time to time. However, Parchment paper prevents anything from sticking. (And, I got as whole bunch for free!)

Thank you for all your videos. You are by far the best out there and have never steered me wrong. I’m trying this one out this week to prep for mother’s day photo tiles 🤞. Do you have a website or are your steps listed anywhere?

@rogersshop

Жыл бұрын

We do have a website, but the steps are not listed there and most of these custom items are sold locally and not on the website.

@valerietramontozzi7595

Жыл бұрын

I got the chance to try it today but it peeled when taking the paper off. I sanded with 400 grit. I did the 2 coats, letting it sit over night both times but didnt press it until 2 days later. Im thinking its because I didnt sand it enough. Any tips?

@rogersshop

Жыл бұрын

@@valerietramontozzi7595 I've never had that happen. Could be that you did break the glaze enough on the tile first. Try a 220 grit paper if your glaze is especially tough.

Thanks Roger like watching all your videos they are so great. One question looks like the one with clear vinyl looks more vibrant then the one with polycrylic not sure its the lighting though. Also could you use white vinyl too on these?

@rogersshop

2 жыл бұрын

Yes, you could also use white vinyl. It that case, it would not matter what color the tile was.

Thank you Roger. This is a very informative video. Would you mind answering a few questions? Can this process be done using a Cricut Heat Press? Would I have to apply manual pressure for this to work? Do you have a recommendation for temperature and time using a Heat Press?

@rogersshop

Жыл бұрын

Yes, you could do it with an Easy Press. However, it takes a lot of pressure and you need to make SURE you do not move while doing it or it may ghost. Time & temp would be the same as if using a heat press as shown.

Thank you! Very easy to listen to. Question, should I use poly acrylic spray or brush on? Glossy? And if either, do you have a personal preference?

@rogersshop

2 жыл бұрын

Brush on will leave marks, no matter how careful you are. Spray gives the best finish. When I do a lot of these, I use an airbrush with thinned Polycrylic from a quart can. Much less costly than the spray cans.

Very good demo but I'd like to know what kind of photocopy you used- ink jet, laser toner or pigment dye Thanks .

@rogersshop

7 ай бұрын

Hiipo Sublimation ink on a converted Epson 2720 inkjet printer

I love your videos! If I use Home Depot tile for the vinyl method, should I buy the satin or gloss tiles?

@rogersshop

Жыл бұрын

It makes no difference.

Love your videos. I've heard you say in a couple of them that you sell some things like the dollar tree glass cutting boards you did the sublimation on. Do you have a link to the store? I don't have all the fancy equipment you have.

@rogersshop

Жыл бұрын

Most things are produced either for custom use locally, or by special order. I do have a few things on Etsy under Moonshine Nursery, such as some glass trivets and wood signs. My shop is currently on "vacation" as am I, so it will not be visible for another week or so.

Great video, on the tile with the vinyl what vinyl did you use I don't see in the description, I try the laminated pouch and didn't like the results either .

@rogersshop

Жыл бұрын

Oracle 651 Clear. Oracal 651 Transparent Craft Vinyl amzn.to/3gpJJSJ

Great video, I do not have Rapid Tac, can you please recommend another adhesive? Thanks!

@rogersshop

Жыл бұрын

Rapid Tac is not an adhesive. It is a cleaner and a liquid that allows positioning and eliminates air bubbles when squeegeed correctly. Plain water also works, just not as well.

Both poly and vinyl methods worked well for me. I have the same heat press. What paper to you have attached to the upper plate with magnets?

@rogersshop

Жыл бұрын

Teflon sheet

Great demo. Thank you for the up front info. Will these tiles withstand installation in a shower? Is there a particular type that would? Thank you.

@rogersshop

5 ай бұрын

Yes,, so long as not scrubbed with an abrasive.

@RatherDoThanHave

5 ай бұрын

@@rogersshop Thank you.

Roger. I tried the vinyl… it melted at the 385f/240 s… Maybe the vinyl cuz it’s the cheap stuff from $ tree. Was using just to see how it would work. I’m love the template for my vinyl cutter so thanks much for sharing. I do have some Circuit brand vinyl. What time/temp would you recommend for the cheap vinyl I have, I want to be able to use it up. Thanks! Glad I found you.

@rogersshop

6 ай бұрын

Was the vinyl o the bottom? It will melt if on top. I did a trial comparing the Dollar Tree vinyl to others on glass, using this method and it actually turned out pretty good for such cheap stuff.

beautiful! could i put modge podge on the poly acrylic coaster as a second coating after its been sublimated as the protective coating, instead of another coat of poly acrylic ? thanks

@rogersshop

2 жыл бұрын

I suppose one could. I'm not a fan of it as it always shows brush stroke marks, but that is one of my OCD things............ I always spray Polycrylic rather than brush for that reason.

@mamadubwize

2 жыл бұрын

@@rogersshop great point! I'm going to give this a try. Thanks!

Just wondering... With that Polycrylic spray, could this also be used for plain dollar tree COFFEE MUGS, vice having to using actual sublimation mugs. Also, When you say Vinyl you are referring to adhesive vinyl ( I see in your references 651)

@rogersshop

2 жыл бұрын

Polycrylic spray would work if the intended use was just decoration as it is not listed as food-safe and getting it to adhere to the ceramic glazing might be a problem. For the vinyl, yes, permanent outdoor vinyl such as the Oracle 651

Do you find a laminate comes off easy? If so do you have any suggestions? Also, is it waterproof?

@rogersshop

Жыл бұрын

Not had a problem with it coming off. Waterproof? Maybe................ Water resistant, yes. I wouldn't soak it or run it through a dishwasher.

Could you use these for a custom backsplash? The polyacrylic version.

@rogersshop

Жыл бұрын

Yes, just be careful of abrasion if not top coated.

Does it matter if the polyacrylic is Matte,glossy or satin? I see your link is for the satin version but I was just wondering because I have a mat one at home.

@rogersshop

Жыл бұрын

It makes no difference. I just use satin because I have a lot of it.

Roger, what laser machines are you using in the background in this video

@rogersshop

2 жыл бұрын

Those are Creality Ender3 V2 3D printers. we make custom parts for various things and they run pretty much 24/7. Just added another this past week, but a different brand with a larger work surface.

Where did you find the 4 25 X4.25 square ceramic tiles? I went to Lowes and their smallest tile was 6X6. Everything on Amazon costs around $1 for each tile

@rogersshop

2 жыл бұрын

Lowes, Home Depot, and Menards all have these. They are basic ceramic wall tiles. The Menards price is $0.15 each when purchased in a case of 100. As a plus, those from Menards are made in USA by Mohawk. I have also used the 6 x 6 for trivets, but laser engraved, not sublimated, so as to tolerate heat.

@virginiamcquiston7572

2 жыл бұрын

Thank You

What's with the Dr Pepper can? Almost looks like you'd need the old hole punch can opener, going by the design, which goes way back. Is the 'made with sugar' soda from Texas, or are other areas doing that now, too? I know a LOT of food companies are trying to get away from high fructose corn syrup, which I personally believe is largely responsible for obesity and diabetes in our country. But I'm no doctor - I only play one on KZread. In your home siding video, I thought it looked like Southern Missouri. But I don't know my states that well. Cool ideas with the tiles. Could you put a coat of epoxy resin on it? That bullnose edge might be a problem, unless you have the tile sitting up on something and pour it on and let it drip off the sides.

@rogersshop

Жыл бұрын

Whenever I see the "Made With Real Sugar" Dr. Pepper at the store, I stock up on it. I like the taste better and it reminds me of the bottles I could get when I was a kid. I am in northern Illinois, along the Mississippi River, bordering Iowa. Yes, one could coat the tile with epoxy resin so long as the formula would not react with the base. I have a friend that makes coated tumblers and found that out the hard way!

I sanded with the power tool with 60 grid, and 400, it still feels smooth, are you able to feel roughness when you sand them?

@rogersshop

Жыл бұрын

No. You should not feel any roughness.

could you do bigger tiles and use as a hanging decoration?

@desparzaification

Жыл бұрын

You can use any size if your press is big enough

hi sir, will this last if installed outdoors? how long will it start to fade? thanks!

@rogersshop

Жыл бұрын

Yes, it will fade from the UV in the sun after a few months. Takes about 6 months to fade out if in direct sun. Guess how I know that!

Do you know why the 3 different brands I've tried of sublimate on white htv it came out faded but the adhesive side looks amazing. But not usable. What am I doing wrong. I feel like I'm the only one getting this result. I've seen people sublimate on white htv

@rogersshop

Жыл бұрын

Use permanent outdoor vinyl, not HTV. Yes, you can sublimate onto HTV, but this is not the application for it.

I have the Epson et 2803 do You know the link to find the color profiles for the hiipoo inks for my printer I’ve searched and cannot find them from hiipoo. Have you tried the clear vinyl method on thin glass? Many thanks

@rogersshop

2 жыл бұрын

I do not know of an exact color profile for the Hiipoo inks, but do have the Hex code for the four primary colors. Black #000000, Yellow #FFFF00, Magenta #FF00FF, Cyan #00FFFF. Yes, I have done this on the thin Dollar Tree picture frame glass, which is half as thick as regular window glass. Works fine, but be careful with pressure as it beaks easily. Guess how I know that.........

@darleneroach2848

2 жыл бұрын

@@rogersshop thanks Roger, what settings best for thin glass, you used clear HTV over the glass right?

@rogersshop

2 жыл бұрын

@@darleneroach2848 Do not use HTV. Use permanent outdoor vinyl such as Oracle 651 or 751. Can be gloss or matte. Doesn't matter. Clear or white work the same. 385 degrees for 190 seconds. Medium-firm pressure. Photo/graphic facing up, vinyl side of glass facing down. Be sure to preheat bed. Do not try to hot peel. Let it cool and use water to get paper to release. Magic eraser and water will then remove the white film left behind.

Hi just wondering where you purchased the felt for behind the tile?

@rogersshop

Жыл бұрын

These are Self Adhesive Cork Squares amzn.to/34FQf5e

So you don't bake in the polycyclic after the 2 coats?

@rogersshop

11 ай бұрын

No. Not necessary.

I have a question …. Can I set a hot pan or bowl in these after they have been sublimated

@rogersshop

Жыл бұрын

Yes, but limited. 350 degrees F would be about the limit.

Roger, when you sanded the tile to remove the glaze, did you use the electric sander or did you do it by hand? Thank you!

@rogersshop

Жыл бұрын

I've done it both ways. When doing a lot of them, I use a DeWalt random orbit sander.

@mompreneursalliance

Жыл бұрын

Roger, one more question - what are the dimensions of the shape you cut out in the vinyl to wrap the tile? I’m making coasters for a Christmas gift and have wasted 2 sheets of vinyl because my template isn’t quite right size wise. Thank you.

@rogersshop

Жыл бұрын

@@mompreneursalliance Center square is 4.125". The four "lap tabs" are 4.125" x .75". I did this on a Cricut and because of their proprietary "rules", I can't share the template.

@mompreneursalliance

Жыл бұрын

@@rogersshop no worries. Having the dimensions worked. I thank you. I also thank you for the Rapid Tac recommendation in your video. That makes applying vinyl a cinch.

@rogersshop

Жыл бұрын

@@mompreneursalliance I did find a way to share the Cricut template. The link to it is in the description

The vinyl that you used in this video is that vinyl inkjet printable vinyl that I can use in my inkjet printer?

@rogersshop

Жыл бұрын

No. that will NOT work. This is Oracle 651 permanent outdoor vinyl.

@parkwayhandmadecraftstation129

Жыл бұрын

@@rogersshop ok thanks

Do you have an Amazon affiliate link for the polycrylic spray

@rogersshop

2 жыл бұрын

Yes. I missed that in the description, but now updated. It is: Polycrylic spray amzn.to/3Lhe58a

I tried using white vinyl and it turned out more like porcelain than vibrant like yours. Should I have used clear instead?

@rogersshop

2 жыл бұрын

Yes, clear gives a more bright image.

I have the following and would like to know if i can use them any of these as a substitute: Krylon colormaxx clear indoor out door i have the gloss crystal clear and the flat crystal clear, rust-oleum painter's touch satin clear , the modge podge gloss crystal clear sealer "spray" (-:.. i know we've been down this road before, but i wanted to add some more choices to the pot in hopes of getting a "clear" winner, lol (-: hoping something in my stash works. (-:

@rogersshop

Жыл бұрын

I have tried solvent based clear coatings and they do not work. The coating usually blisters in the press and color transfer is either poor, or none at all. The water-based Polycrylic has given the best results.

@mamadubwize

Жыл бұрын

Thanks for saving me from the trouble of making a mess as well as wasting my time n supplies.

I'm watching this way after the fact (sorry). I have a question, the tiles, although they are covered on the edges with the vinyl they 'look' raw. Can they be painted white before doing this process?

@rogersshop

Жыл бұрын

Yes, they can be painted with high temp paint. Or, you can wet sand the bumps off with silicon grit 220 paper.

How do you print out the pictures? Is it certain paper and ink ?

@rogersshop

2 жыл бұрын

Sublimation ink on sublimation paper. Regular ink will not work.

Hi, I followed your instructions and my tile did not sublimate well both times I tried. It looks like some of the ink came through but it’s very grainy looking, the image isn’t good. I’m wondering if it’s a difference in the paper. I use texprint sub paper and cosmos ink. They have worked great sublimating on everything else so far. I did only do two light coats of polycrylic so I’m wondering if maybe I didn’t have enough. The paper didn’t stick to it either. Only some of the ink came off none, of the paper stuck to it. So I didn’t have to wash it off it was just really grainy.

@rogersshop

Жыл бұрын

I also use Tex Print from time to time, so that is not the problem. Check your pressure (should be quite firm) and be sure to preheat the bed and pillow a full cycle first. This preheat makes a big difference. When printing the graphic, use the highest quality setting possible. Also, what base are you using? Clear vinyl, Polycrylic, or laminate?

@melissamarieartistry

Жыл бұрын

I used polycrylic spray matte, light coat twice and completely dried. I keep my print settings on prem matte, high quality. I did preheat the bed but not with the pressing pillow! I’ll try that! I had medium pressure, firm enough that it was slightly hard to close with the tile in place.

@melissamarieartistry

Жыл бұрын

I tried heat pressing the pillow too beforehand for the full time and it was still grainy. I turned the press up to 400degrees and pressed the same tile again and even more color came through, but still not quite there. I’m thinking tomorrow I’ll try this at 400 for longer.

What type of tiles Are you jusing? Normal ones?

@rogersshop

Жыл бұрын

Standard 4 x 4 ceramic wall tile (actually measures 4.25 x 4.25")

How do you cut the wrap around vinyl what size do you cut?

@rogersshop

Жыл бұрын

4.25" square, then add 1/2" on each side, leaving the corners open. I do this on a Cricut Maker. Because of their "design", I can't share the cut file.

Which poly spray did you use

@rogersshop

Ай бұрын

polycrylic spray amzn.to/3Lhe58a

Hello could you please tell me how to remove vinyl from ceramic tile ? Thank you

@rogersshop

2 жыл бұрын

Heat gun to soften and then peel. Some adhesive may remain behind, but can be removed with a product such as Goof-Off.

@normazaharioudakis115

2 жыл бұрын

Thank you very much

Can I use orecal 651

@rogersshop

Жыл бұрын

Yes

Do you clean the little bumps off the side of the tile. They really annoyed me. I was going to use a grinder.

@rogersshop

Жыл бұрын

Sometimes, I use my Triton with a carbide belt. Normally, I just leave them.

@desparzaification

Жыл бұрын

@@rogersshop Buy tilke without them. They are a pain in the ass.

Could you please tell me if you have a template to cut the clear vinyl to size with the corners cut out?

@rogersshop

Жыл бұрын

Yes, but since it was created in Cricut Design Space, I can't share it. Make a 4.125" square, then add a 4.125 x .1" rectangle to each side, then weld. This gives the pattern with the cutout corners.

@heyjudequiltco

Жыл бұрын

@@rogersshop thank you so much

@mamastein2002

Жыл бұрын

@@rogersshop since your template was created in Design Space would it be available in there for someone who uses Design Space?

@rogersshop

Жыл бұрын

@@mamastein2002 OK, I figured out how to share this! I added the link to this in the description of the video, as well. Here it is: design.cricut.com/landing/project-detail/61fae8abef1192102efa4db8

@mamastein2002

Жыл бұрын

@@rogersshop that is awesome! Thank you so much ! This is such a great tutorial!

Can I use it as tombstone photo

@rogersshop

Жыл бұрын

I don't see why not. If outdoors, though, it will fade in the sun over time.

If the polycrylic works in a ceramic tile would it work on a mug too

@rogersshop

2 ай бұрын

Yes

@clairecolchester7345

2 ай бұрын

Would it be ok for me to use or just for decoration

@rogersshop

Ай бұрын

@@clairecolchester7345 If using for a coaster, etc., apply a clear coat to protect the image.

What brand clear HTV do you use?

@rogersshop

2 жыл бұрын

Do not use HTV. Results will be very poor. Use a permanent vinyl such as Oracle 651, 751, or Siser Premium outdoor vinyl.

What vinyl did you use?

@rogersshop

7 ай бұрын

Oracal 651 Transparent Craft Vinyl amzn.to/3gpJJSJ

Just looking at your work area, Kinda like mine. I have 2 filament printers, 1 resin printer, 1 laser engraver, 1 Cricut explore, 2 printers, 1 regular and 1 sublimination, drawers full of printer parts, and 1 kick ass high end computer to handle it all lol. oh yeah loads of materials

@rogersshop

2 жыл бұрын

There is also a "laser room", that used to be a bedroom. I have nine different brands of diode lasers. Room is crowded!

what size is your template for the tile

@rogersshop

2 жыл бұрын

Measure your tile, but mine are 4.125" square and I allow .75" on each edge to wrap under, with corners cut away to prevent overlaps on edges and back. The cork base then cover where it wraps under.

what printer and software is used to print to the viny??

@rogersshop

Жыл бұрын

The printer used here is an Epson 2720 with sublimation ink, printed on sublimation paper. It does not print direct to the vinyl.

@Chet_Vanderlinden

Жыл бұрын

@@rogersshop oh ok i understand thanks...but with that being said it is possible to transfer an image to the vinyl and the apply the vinyl to a surface of choice

@rogersshop

Жыл бұрын

@@Chet_Vanderlinden It can be done on HTV to apply to a porous surface such as fabric, but I've never tried it with Permanent outdoor vinyl. Not sure how the adhesive would hold up after the heat transfer.

How did you get your shape for the clear htv to fit on the tile

@rogersshop

Жыл бұрын

Created the template in Cricut Design Space after carefully measuring the tile to get exact dimensions. Don't use HTV here. Use permanent outdoor vinyl, such as Oracle 651 or 751.

@escapedgoat5865

Жыл бұрын

@@rogersshop very helpful. Thank you for noticing i thought it was htv. I mean it was a sticker hence the wet application but because it went under the press I had htv on the brain.

@sheri8471

Жыл бұрын

@@rogersshop What is the size of the clear vinyl you use to get the overlap

@rogersshop

Жыл бұрын

@@sheri8471 4.25 " square with 1/2" overlap on each side, corners cut out

What brand of htv did you use

@rogersshop

Жыл бұрын

Do not use HTV. HTV is designed for porous surfaces, such as fabric. Use permanent outdoor vinyl, such as Oracle 651

@kristinadodson1

Жыл бұрын

Thank you I was wandering what I was doing wrong

Roger what size did you cut your square a nd the cutouts mine is always off thank you

@rogersshop

2 жыл бұрын

Measure your tile, but mine are 4.125" square and I allow .75" on each edge to wrap under, with corners cut away to prevent overlaps on edges and back. The cork base then cover where it wraps under.

@jessieritasatterly8524

2 жыл бұрын

Thanks so much

@pixiwings75

2 жыл бұрын

@@rogersshop do you do the cut outs for the corners in cricut design or manual - how do you do that?

@rogersshop

2 жыл бұрын

@@pixiwings75 On the Cricut. Make a square, then some rectangles. Put all into position and weld, then cut. Measure your tile carefully first.

@sheri8471

Жыл бұрын

@@rogersshop so that is 4.200 is that correct

What are those machines working in your background?

@rogersshop

Жыл бұрын

3D printers. We have 14 of them and working most of the time.

@MrJj2001

Жыл бұрын

@@rogersshop Is 3D printing for primary projects? And do you have an engraver?

@MrJj2001

Жыл бұрын

@@rogersshop Thanks for your response, you seem very knowledgeable and dedicated to your craft! Great discipline and focus! God bless!

@rogersshop

Жыл бұрын

@@MrJj2001 I print custom mounts and risers for laser engravers, along with a few other things. I do have laser engravers. Both diode and CO2.

do use matte or gloss with the polycrylic

@rogersshop

2 жыл бұрын

I used satin on this one, but gloss works just as well. Personally, I don't like a matte finish on something like this. Upcoming, I'm going to do a video comparing the "release" properties of three different brand sublimation papers and will be using a combination of satin and gloss.

@mrgrinch61

2 жыл бұрын

@@rogersshop I look forward to it

What size is the vinyl that you use

@rogersshop

Жыл бұрын

Varies, depending on project and what I have. Might be sheets, might be on a roll.

@sallypaluh3598

Жыл бұрын

@@rogersshop sorry i was asking what size you make the wrap with the clear vinyl

@sallypaluh3598

Жыл бұрын

5x5 square

why did you put clear vinyl on the tile first

@rogersshop

2 жыл бұрын

You cannot sublimate to bare tile. Nothing will transfer.

@sheri8471

Жыл бұрын

@@rogersshop my clear vinyl melted :(

@rogersshop

Жыл бұрын

@@sheri8471 tile must face DOWN. If up, the vinyl will melt

Could you direct me to the material you got from hobby lobby that you sublimated on. Can't for the life of me find the correct video.

@rogersshop

Жыл бұрын

Nothing came from Hobby Lobby, although they "may" carry some of these items. other than the tiles (came from Menards), all other supplies were from Amazon. IMHO, Hobby Lobby is over-priced on most items and can be found for less cost elsewhere.

@yvonnepierce2913

Жыл бұрын

@@rogersshop oh I thought you got some burlap type of fabric for sublimating from hobby lobby.

@yvonnepierce2913

Жыл бұрын

It was in a tutorial a while back, where you took your camera with you. Am I mistaken?

@rogersshop

Жыл бұрын

@@yvonnepierce2913 It was not me

Why don't you put in other way?

@rogersshop

Жыл бұрын

No scorch or melting this way