These Leo Vince's sound so amazing on the bike. My '09 696 also has them. always amazing

@HansGarage

Ай бұрын

So good especially when they back fire

Bro what kind of freaking small ass torque wrench is that its awesome. Also really good video and like the bike i have a 2019 monster 797 plus and absolutely love it.

@HansGarage

Ай бұрын

It was for my mountain bike and came with it!

Hi, check 5:17 and 10:53 of video, looks like clutch "head" (which hold the plates) should be installed in its own set of slots (not so deep ones), and you installed it in same slots with clutch plates. Not sure, if it is wrong, but at least noticeable

@HansGarage

4 ай бұрын

this is my third time installing and it is the correct way to install together in the slots

nice video, but first of all try to tight in the bolts opposite and you also overtight the bolts in your clutch when you try to torque the bold with the 5nm (wich is nothing) the bolts are dont even move, you just give presure on your torque "wrench"

Awesome video.. I'm gonna be doing the same job soon on my Ducati monster 2012 696.. Can you share if possible what that tool is that you used for the torque specific tightening was that you twist and it clicks. Is it adjustable to different torque settings?

@HansGarage

10 ай бұрын

It was from my mountain bike tool preset to 5ft lb.

Nice job. Wonder why you waited 2 days to fill with oil, letting RTV cure? Did i miss the model and year of bike?

@HansGarage

Жыл бұрын

Yea, just to make sure it was completely dry. I've been riding all season and no leaks so did the job right for sure. 2011 monster 696

I did like you say and when i put first gear the bike moving without even that i realise the clutch lever,its just not stand when i press clutch And when the bike on first gear is not go to nutral and upper gear ,only if i speed on first gear,then he will go to upper gear,what could it be i did wrong????

@HansGarage

Жыл бұрын

Seems like you need to bleed out the clutch line and make sure the rubber is properly set in the clutch reservoir

question, i did the same on my monster 796, starts perfect but my clutch handle is jammed, now it stuck real tight, cant push it in anymore. any ideas? thx. grtz from belgium

@HansGarage

4 ай бұрын

I would flush the brake fluid for the clutch reservoir

@wespetit150

4 ай бұрын

@@HansGarage this was exactly what i did, problem solved lol. was to quiqk to ask this here. cheers mate,

@HansGarage

4 ай бұрын

Awesome! 👏

𝐩𝓻Ỗ𝓂Ø𝓈Ｍ