Ducati 696 Timing Belts Replacement - Aw Snaps 🫠🫣
Have you been thinking about replacing the timing belts on your ducati, don’t risk it and do it yourself. I am not expert but if I can do it you can do it too.
Email me: tomodornottomod@gmail.com
My bikes
#ducati #monster696
#kayo k230
Пікірлер: 20
Really good video, giving me the confidence give it a go.
very very good Thank you so much
Great video, thanks for sharing 😊, I would have changed the tensioners though, Best to be safe than sorry. I know they would most likely be ok but i just couldn't take the risk. 😊
I picked up a 696 a month ago and just ordered the belts plugs and filters. Thanks for sharing this. Great details and camera angles 👍🏼
@ToModorNottoMod
2 ай бұрын
I’m glad I was able to help a bit!!!! Hit me up if you have questions.
If I ever get a bike I will let you work on it ! Great video and explanation ! 🇵🇷
Thats an oil pressure switch not a crank sensor, crank sensor is on the left side of the engine
Great video but I have one question how much torque on the timing belt tensioner. I cannot find it anywhere ?
@ToModorNottoMod
3 ай бұрын
I think I mentioned it in the video, hopefully. I have seen manuals with different numbers bit all close between 22-26 NM.
Hey, question. Do I have to change the tension rollers with the belts or just belts. If yes, why? Thank you
@ToModorNottoMod
2 ай бұрын
It depends. Since the intervals on these bikes is short. Yo are okay reusing the rollers. At the very least try to move them by hand to see if they roll without too much resistance. If they are dragging or requieres too much force to move them change them. I am giving you this answer without knowing the biles of your bike, but normally you don’t have to change the rollers with every belt replacement. Be safe!!
when do we need to replace the tensioners? cause in the ducati service center when you get the belt replaced they also replace the tensioners.
@ToModorNottoMod
Ай бұрын
I don’t think it’s a bad idea because you are already there. Looking at the book Ducati refers to them as timing pulleys or spur gears. I do not see any specifications. I don’t think it is required on every timing belt change but I would check them to see if the have any friction to it and if not try to change them the next time.
@vince6219
Ай бұрын
I wouldn't take any chances, I would replace the tensioners... Every car i have had you change the tensioner roller, why wouldn't you on your Ducati?, it would be very costly otherwise. is it worth the risk?.
@ToModorNottoMod
Ай бұрын
You can do it of course. I don’t think you need to it every 7k miles but if you can afford it by any means is probably the best.
Hi! On how many km this should be done?
@ToModorNottoMod
Ай бұрын
I temember that back in the day I when I got my first Ducati the replacement was at 7500 miles. But I am now looking at the Manual and it says. - Check Tension every 12 months or 7500 miles or 12 kms - Renew Timing Belts - Every 2 years or 15k miles or 24 kms. Hope that helps!
is it the same on a 796? and on a Scrambler 800?
@ToModorNottoMod
2 ай бұрын
Same process 🙃
@ToModorNottoMod
2 ай бұрын
Let me know if you have questions