Пікірлер

• 
  @user-jn3vg3ts4f2 сағат бұрын

  It's alright!,it will wash away the little splishes from the Pan 😮😢😅❤

• 
  @yorgalas17 сағат бұрын

  Absolutely fabulous video, ive seen others and just wondered was it necessary to remove the power steering oump and engine mount bolts from the top of the engine, can you not just leave the ps pump on and undo the bottom engine mount bolts from the bottom? Just curious as i want to do this job soon too

• 
  @10ToGoPro2 күн бұрын

  You might need an Asian fit Helmet Different helmets are actually designed for different types of people Usually it’s American, European and Asian

• 
  @HansGarage2 күн бұрын

  Nope just needed one size above MD/LG

• 
  @bauerjack19786 күн бұрын

  Did you get anymore noise or harshness with the yellow mounts or do you think there better the original bmw ones

• 
  @georgebaloian82726 күн бұрын

  Thank for the video about to change mine! So the downstream bank 1 is the rear plug right?

• 
  @joepapa528 күн бұрын

  Can you share the link of the store you purchased them

• 
  @iPhoneAppReviewer10 күн бұрын

  Does this cause a CEL?

• 
  @mattb302810 күн бұрын

  Did you check the initial codes at the dealership or after you purchased it?

• 
  @HansGarage10 күн бұрын

  Yes, cylinder 2 misfire

• 
  @mattb302810 күн бұрын

  @@HansGarage Thanks for that. I'm surprised their mechs didn't assess the car better beforehand. You got a STEAL... I can't find anything in decent condition in BK, Queens, or NJ for the same price on FB marketplace. Got any connects or communities? Looking to join the E46 fam

• 
  @HansGarage10 күн бұрын

  @mattb3028 ill keep a look out for

• 
  @kasrabahmanyar119311 күн бұрын

  you can also just code this into your ews using bmw scanner instead of cutting up wires

• 
  @kasrabahmanyar119311 күн бұрын

  just a heads up if your e46 is made after 2002 your clutch pedal safety switch is completely different

• 
  @Swisha90s14 күн бұрын

  Did u try to putin on in a normal way? Like the upperback of the head, then pulll down. Or lift i up in the back and pull it down in the front(changing the angles i guess 😂

• 
  @HansGarage14 күн бұрын

  Cmon now… ive tried every possible way. Turns out I needed one size up

• 
  @marteebus15 күн бұрын

  The locking nuts that go on the back of the bolts on the guibo you show the nuts as 18 mm in the video. I'm trying to get these so I'm ready to do this job and everywhere I look they're claiming to be M12 lock nuts. Are you sure on the m18?

• 
  @HansGarage14 күн бұрын

  it is confusing when you go by hex size M12. Which is in millimeter 18mm

• 
  @prodKossi15 күн бұрын

  This would go for atleast 20k where im from.. Damn, yall got it easy in the states, lol

• 
  @vegasdavis540415 күн бұрын

  Bro what kind of freaking small ass torque wrench is that its awesome. Also really good video and like the bike i have a 2019 monster 797 plus and absolutely love it.

• 
  @HansGarage15 күн бұрын

  It was for my mountain bike and came with it!

• 
  @LeverPhile15 күн бұрын

  @ 0:32 ... the post cat sensors are not the same for the later e46s (post 3/2003 production with ms45.1). I suspect its only the wiring connectors that are different, but dont know for sure.

• 
  @pnojazz16 күн бұрын

  Total SCAM!!!

• 
  @pianothatilove17 күн бұрын

  In this case, go to the dealership again and ask to show your car to the individual who 'found' the initial leak together with his manager. If this was an intended way to deceive then shame on them. Nasty and long review to fallow I guess

• 
  @lizabethlynch283717 күн бұрын

  Terrific, clear and precise video. Wish all KZreadrs were as good! You’ve made this project DIY Possible. Great work.

• 
  @cyclohexane929518 күн бұрын

  No need to grind! There's an adjustment teethed little knob!

• 
  @jorgefranco849818 күн бұрын

  Does this fixes the gauge hi temp

• 
  @thamomentum19 күн бұрын

  Dude! Thank you -you made this look very easy and simple

• 
  @Andrewlone17420 күн бұрын

  car supposed to be on a level surface so you did wrong job

• 
  @FortekMusic20 күн бұрын

  How do you have so much clearance to get to the rear bushing? Either way, this was so much help! It is not as hard and I thought it would be.

• 
  @hakan899722 күн бұрын

  Before changing rear shock on a e46..... Buy a convertible. Both shocks is changed in alot less than a hour. After changing the shocks one time its done in totally 30 min. Meaning expensive long life shocks is not needed. Specially now when models getting old.

• 
  @josephmcgowan443626 күн бұрын

  I know this video is 7 years old, but appreciate the video

• 
  @jonathanv488326 күн бұрын

  So I buy 2 of the same upstream and 2 of the same downstream or is each individual sensor different

• 
  @HansGarage24 күн бұрын

  same part number as shown

• 
  @wellokayyes126626 күн бұрын

  I’m looking for a scanner anyways. Aside from this great solution for airbag light, is this scanner overall a good one?

• 
  @morphiuzs689228 күн бұрын

  These Leo Vince's sound so amazing on the bike. My '09 696 also has them. always amazing

• 
  @HansGarage28 күн бұрын

  So good especially when they back fire

• 
  @Puttjattanda2429 күн бұрын

  What did you use to torque the T27 screws? Also do you use 3/8 drive torque wrench for everything else?

• 
  @EmilyBrady-mb8klАй бұрын

  Hello will this apply to a 2012? i just replaced the upstream sensor and still having issues with the jolting and the check engine light is still on showing p0420

• 
  @HansGarage29 күн бұрын

  Yes is it just the 4cylinder engine? Replacing downstream should fix the code

• 
  @EmilyBrady-mb8kl28 күн бұрын

  @@HansGarage thank you! I just had the catalytic converter replaced in October of 2022 and they confirmed that didn’t replace the sensor

• 
  @JennNetoАй бұрын

  Where did you get the tool to help you unscrew the sensors? 😅

• 
  @HansGarageАй бұрын

  Amazon lol

• 
  @cobrakaiwizard9362Ай бұрын

  Do all cars have 2? Or am I just crazy ?

• 
  @HansGarageАй бұрын

  Depends on your engine size. Most 4 cylinders have 2. 6 cylinders and up have 4 sensors

• 
  @r-es9kpАй бұрын

  Very useful bro

• 
  @LansingR6Ай бұрын

  Do you know if they fit the regular e46 330i sedans

• 
  @hashim_iraqАй бұрын

  Such an excellent video!! Thank you very much!

• 
  @markverre1Ай бұрын

  The plastic of the expansion tank on my neighbor’s 325ci cracked severely, leaving them stranded in the mountain city of Idyllwild, requiring them to have to tow their vehicle to down to Palm Desert, CA. While an owner could certainly replace the tank themselves, perhaps the dealerships are aware that aging plastics subject to high temperatures fail. Good practice to pop the hood, as even a non-mechanic may spot leaks or yellowed, brittle components.

• 
  @willfreethemfreethem7671Ай бұрын

  How would i replace mine if the window is stuck all the way down?

• 
  @HansGarageАй бұрын

  you can push it up when you open the doorcard

• 
  @LILLIAN559Ай бұрын

  THANK YOU! PERFECT!!

• 
  @LILLIAN559Ай бұрын

  PERFECT!!!!

• 
  @Salken3Ай бұрын

  Very good👍

• 
  @kennethschauer1801Ай бұрын

  I run 20w50 both holes as recommended by Harley davidson

• 
  @AMMA-we3zzАй бұрын

  It is always best to label all your male and female connectors before disconnecting the plugs. This will help avoid confusion and mismatching the plugs. If you prefer not to label, do one harness at a time like when you change your plugs.

• 
  @GMRoneАй бұрын

  Nice.pedals

• 
  @alexgennaro7072Ай бұрын

  Hey, do you have to code the car and change the internal light switch or its plug and play? I see different videos where they have to code the car to make led tail lights working.. or its only for OEM lights... ?

• 
  @nooraneemahamoodally6382Ай бұрын

  Thx. What is tge torque spec on 04 645cic?

• 
  @user-dx5mg1cz9uАй бұрын

  Где перевод непонятно что говорить.нет перевода на руском.

• 
  @whateverrrrrr123Ай бұрын

  its also good to vac the area

• 
  @steverunciman3514Ай бұрын

  (But only before you open the cover plate)

• 
  @serapkahraman9202Ай бұрын

  Merhaba han.Rica etsem S50B32 timing ve vanos videosu eklermisin hiçbir yerde bulamadım.şimdiden teşekkür ederim.

• 
  @apsirotinАй бұрын

  Great video. Thank you.

• 
  @HansGarageАй бұрын

  Thanks for watching

• 
  @wellokayyes1266Ай бұрын

  Subbed 👨🏻‍🔧