Parts used. www.ebay.com/itm/174261007157... www.ebay.com/itm/353344708912... www.ebay.com/itm/374295683081... www.ebay.com/itm/265344699648...
Жүктеу.....
Пікірлер: 155
@kevinkillsit Жыл бұрын
I think you finally convinced me to swap the carb out. I have an 09 with 126k mi on it. Doing a valve clearance adjustment right now, but might just go all in. Sounds good.
@linksgarage1985
Жыл бұрын
126k miles! That’s impressive! Any major engine work in that time? And I dialed it in. Last video, I installed a 170 main jet. And it freaking rips!
@kevinkillsit
Жыл бұрын
@@linksgarage1985 my DRZ has been my best friend in my motorcycle journey. Her name is Rachel. I don't get too emotional about my other bikes, but I have seen a lot of the world on her and experienced a lot of great things on that shitty stock seat haha. Thinking this year I'm going to do a refresh and get some new parts going for her. I had one issue where I blew the base gasket at around 90kmiles so I did a whole teardown and rebuild back then. Tranny and everything else has been bulletproof. Broke a clutch cable and put a hydraulic on it. Lots of different tires. A few batteries and petcocks too. I geared it 15/38 for the highway to commute on when I got it which is what racked the miles on it. (Taller gears and shorter chain.) Dynojets in the stock carb which I've rebuilt so many times I can't even remember. Yoshimura RS2 exhaust. Coolant changed twice. Brake fluid maybe like 4 times. It doesn't get too hot usually, but now I've started tracking it again. Oil change about every 2k with Lucas full synthetic. Now it stays with a 14/38 most of the time and is my fun bike. I'll try to put up some more videos, it's been a while. Keep up the good work on your channel.
@linksgarage1985
Жыл бұрын
@@kevinkillsit man, this is the coolest shit ever! I think this is badass! The memories made are insane. Think about how much a DRZ cost. And the return you’ve gotten on your investment. Absolutely amazing! I just subbed! I’d love to see an over view of that bike, along with that story you just told. You make the video, and I’ll mention it and send some people your way to check it out. This is the good stuff. Talking to people with stories like that. Thanks for the comment! I appreciate you.
@kevinkillsit
Жыл бұрын
@@linksgarage1985 sounds like a great video idea. I'll have to get started on it so stay tuned!
@linksgarage1985
Жыл бұрын
@@kevinkillsit hell yea. I’d love to see it. Hear about some of the adventures. All the parts replaced etc. that bike might have more documented DRZ miles than any other out there. (Maybe). Just watched your walk around from 9 years ago. Good stuff. Watching others now. Larger gas tank right?
@capesterr1 Жыл бұрын
Wow another great video! I will be doing this carb swap for sure. Thank you for doing this, I know DRZ community will love it.
@linksgarage1985
Жыл бұрын
Thank you! Many more videos on the way. Have a merry Christmas!
@terryerickson4697 Жыл бұрын
Your reaction when she fired was awesome. Great video. Looking forward to when it gets warmer to do the exact thing.
@linksgarage1985
Жыл бұрын
Can’t wait until it’s warm man! Going to ride the crap out of it.
@WY_BUILDN Жыл бұрын
You are the real mvp! Awesome video!
@linksgarage1985
Жыл бұрын
Thank you man!!!
@maxwell9734 Жыл бұрын
Awesome man! Combining two different pieces, to make a good Air seal, ingenious! You better tighten up the chinstrap on your helmet before you test ride that bike! 🚀 Man, you can just tell by the sound of it! 👍
@linksgarage1985
Жыл бұрын
It freaking rips!
@sharpbj Жыл бұрын
Love it Bro! Keep up the good work. I'm so excited, I'm going to fire it up again. hahah
@linksgarage1985
Жыл бұрын
Hell yea! I just rode over an hour is some freezing ass snow. Video coming soon! Ha
@dawidbarczak4736 Жыл бұрын
thanks to you i bought the drz yesterday and i am very happy heh
@linksgarage1985
Жыл бұрын
Oh hell yea! You’re going to love it!
@dawidbarczak4736
Жыл бұрын
how many miles do you do on a full tank?
@linksgarage1985
Жыл бұрын
@@dawidbarczak4736 stock, I really don’t remember. Probably close to 100 before you hit reserve. I usually fill up around the 85 mile mark. The reserve is .6 gallons. So if you run it out, and swap to reserve, you still have 25 miles or so before you are actually empty.
@Billy00Brayan Жыл бұрын
Great Video ! Love the content! But I recommend getting the oem adapter bro , yur air jets are suckin in unfiltered air ….( 2 holes underneath the red velocity adapter) “red bell adapter” as some may call it
@linksgarage1985
Жыл бұрын
All good. Thanks man
@CocoBoulders Жыл бұрын
Thank you for this video! In the process of doing a similar install and the fact that I need to take off the rear portion of the exhaust, the breather box and partially disassemble the carb to then fight with the thing to even fit has me legitimately considering just getting my bike running and immediately selling it lol. I've owned a bunch of carbed bikes and never had to fight so hard to remove and install a carb on one of them
@linksgarage1985
Жыл бұрын
You actually don’t have to do any of that. Just makes it easier. Just pop up sub frame bolt and it’ll come out. I’ve done it 246 times that way.
@TBOSUMO Жыл бұрын
You the man.
@linksgarage1985
Жыл бұрын
Thanks dude. Got more on the way! 💪🏼
@CraigSmith568 Жыл бұрын
Nice to know it isn't a direct bolt in, but nothing that someone with a little ability to do modifications can't handle. Sounds crisp.
@linksgarage1985
Жыл бұрын
For sure. I could have just chopped the red cone, and smashed it in the rubber airbox boot. But fugggg that. I wanted it to be tight. Works great so far. When it warms up, I’m going to do some serious testing with it. 💪🏼
@emperor91108 Жыл бұрын
Like the new lift
@linksgarage1985
Жыл бұрын
Thank you. It’s a huge back saver!
@sashayaroshuk351 Жыл бұрын
Круто!!! Супер Мото! FSR 39 Power ;)
@linksgarage1985
Жыл бұрын
Thanks for watching I appreciate it!
@marcvienneau55005 ай бұрын
Your thé Best!!
@linksgarage1985
5 ай бұрын
Thank you
@nate4036 Жыл бұрын
I’m not sure if the DRZ is the same concept, but on a YZ450, it’s easier to loosen the top subframe bolts, remove the bottom ones. It allows the tail to pivot over to where the gas tank sits originally.
@linksgarage1985
Жыл бұрын
I’ll try it that way next time!
@sailingaeolus Жыл бұрын
Interesting...! I live out west, have a desert tank and absolutely have to go 200 miles between the only fuel stops in northern Utah. Did you note a change in MPG? If so, from what on stock carb to what on FCR? Many thanks.
@OM-sb2bd Жыл бұрын
🔥
@linksgarage1985
Жыл бұрын
Thank you!
@Stevesmate4503 Жыл бұрын
Hey mate your work is excellent just a quick one what jets did you end up using ?
@Stevesmate4503
Жыл бұрын
All good mate I watched part 1. Should of done that first haha. Unless you have changed them
@linksgarage1985 Жыл бұрын
Hope this helps! 💪🏼
@Xxnate500
Жыл бұрын
Helped a lot man!
@linksgarage1985
Жыл бұрын
@@Xxnate500 glad to hear it!
@thomasvanhouten359 Жыл бұрын
Just curious your thoughts after a month? Just purchased a DRZ and was curious if it would be worth spending the extra money to go this route instead of just jetting the original carb.
@linksgarage1985
Жыл бұрын
Love it
@TBJ_X_VISUALS Жыл бұрын
Ayyyeee. There ya go. So how is it?? Bout to order mine today. Thank you bro. Am I going to need the E model fitting you linked? Will the stock work if I rig it lol Oh an I noticed your 22 doesnt have the vacuum fuel hose. Basically when you take your tank off my 2014, you disconnect your petcock and right behind it is the vacuum line. Then you can pop off your tank. Didn’t see that with yours. Might be the newer models. I simplified my oiI over flow. Deleted the black box and have the air hose that connects on the top of the engine routed counterclockwise up under the tank and going over the frame so it peaks out in front of the tank then down along side the top of the engine then back up the right. I have a small air filter on the end of the hose an it’s positioned up right next to the radiator cap. Then caped off the 1 hose on the back right. She rips. Looks cleaner.
@linksgarage1985
Жыл бұрын
Hell yea! And I deleted all the vacuum stuff and the PAIR valve. Maybe that’s why it’s gone. I’ve been thinking of getting rid of the black box. Just haven’t done it yet. Thanks for watching I appreciate it!
@user-rz3hk8cq4n7 ай бұрын
What were the other two links I can view petcock and carb itself… I’m guessing the e boot and adapter links closed out?
@tazdagreat6745 ай бұрын
Where did you get your face clone from and can you post the link. Thanks I love the videos keep them coming.
@callmewes5121 Жыл бұрын
I've been looking at this actual carb for my DRZ, hope it works out
@linksgarage1985
Жыл бұрын
It rips!
@callmewes5121
Жыл бұрын
@@linksgarage1985 that's rad, and they are inexpensive as well. Damn them Chinese products 😂.
@matthewply1150 Жыл бұрын
So I’ve got a drz400s ‘05. Will this part list work on my bike? I want to give it a try myself
@sswayne1 Жыл бұрын
Great video. I just followed your recipe and am amazed what an upgrade this is. Super helpful! Couple questions. I am finding my choke will not stay on when I pull it out. It just snaps back off. Are you having that issue? I also noticed that if I give it a quick jolt of throttle from idle sometimes it dies....I solved it by idling it up but that seems like a hack. I am using 45 pj, 160mj, and 2 turns on the screw. Any ideas?
@linksgarage1985
Жыл бұрын
Hmm. Jetting sounds good. And as far as the choke goes, no. I don’t have that issue. Does it idle ok?
@sswayne1
Жыл бұрын
@@linksgarage1985 Yeah, it idles fine. Just maybe a tad high. I think the main jet is good. Might play with the screw. For the choke, I just wrapped a zip tie around the rubber boot and it tightened it up and now it stays in place. Easy fix. Thanks again for the video!
@linksgarage1985
Жыл бұрын
@@sswayne1 thanks for watching!!! Need anything just ask!
@norincobro6421
9 ай бұрын
Your AP is weak
@lophophorawilliamsii974010 ай бұрын
Good thumbnail
@linksgarage1985
10 ай бұрын
Thanks! 💪🏼
@keldonator Жыл бұрын
Notice any difference in range on one tank? I considered this but it seems many people struggled to get them dialed in correctly and it staying dialed in compared to the actual FCRs.
@linksgarage1985
Жыл бұрын
Haven’t ran a full tank in it yet. Been pretty cold
@lj627822 күн бұрын
Aren't there two jets open to unfiltered air if you use the red air horn?
@michaelbadolato952 Жыл бұрын
Great video!!! What size fuel line would I need? Also, how’s it holding up? Thanks!!!
@linksgarage1985
Жыл бұрын
Holding up well. Here’s the fuel hose I swapped to. Max-Motorsports 4' x 1/4 ID (6.4mm) x 3/8 OD Fuel Hose Line Mx ATV Dirtbike (Clear Purple) 1/4in ID x 3/8in OD a.co/d/iMmkdvO
@Billy00Brayan
Жыл бұрын
@@linksgarage1985 size on the one that fit (clear ) ??
@terryerickson4697 Жыл бұрын
Hopefully not to obviously of a answer but when I hit the link for the carb and put my bike year (17) is says it not the correct one. Thanks for all that you do. Love your videos!
@linksgarage1985
Жыл бұрын
No problem! I just checked the link, and it’s correct. They are the same from 05-23. Thank you for watching and commenting!
@terryerickson4697
Жыл бұрын
Thanks
@claytonvanrooyen35825 ай бұрын
Great video Brother...how reliable is this carb? Running into any problems along the way...sounds fire man!
@linksgarage1985
5 ай бұрын
It was reliable. I couldn’t get the jetting dialed in exactly how I wanted. So I swapped it back to the OEM carb.
@claytonvanrooyen3582
5 ай бұрын
Thanks man i appreciate the feedback
@claytonvanrooyen3582
5 ай бұрын
Hey Bro so j d jetkit with stock carb ? Thanks Brother
@linksgarage1985
5 ай бұрын
@@claytonvanrooyen3582 that’s what I did. Bike runs well. It’ll hit 105 mph ish
@AnthonyPRP Жыл бұрын
Its better than 3x3 jdjetting
@supermoto_problems Жыл бұрын
Great info but im looking for more. Which size did you order for your drz on Amazon and why?
@linksgarage1985
Жыл бұрын
I didn’t get it from Amazon. All info here. More videos on the channel. kzread.info/dash/bejne/q558layKcbq3cZc.html
@supermoto_problems
Жыл бұрын
Thank you! I checked out Amazon and it was about $312. 😅
@linksgarage1985
Жыл бұрын
@@supermoto_problems I have a feeling once the word gets out, the prices might go up Lol.
@melvinnevarezelmenol6226 Жыл бұрын
I have a question today I mounted my carburetor and it makes a pop noise like when it accelerates, it's like it lacks gas or air and since I don't know much about this, that's why I'm asking you, I don't know if it's the jetting
@melvinnevarezelmenol6226
Жыл бұрын
if you could give me some advice
@josephbishop3231 Жыл бұрын
I HAVE NEVER seen a need to move the subframe to remove the carb. You can pull the airbox boot towards the airbox, and collapse it on itself enough to clear the carb and pull it off.
@linksgarage1985
Жыл бұрын
Sweet!
@rcvg694203 ай бұрын
How has the clone FCR been for you long term? Holding up well?
@linksgarage1985
3 ай бұрын
It held up just fine. I did swap back to OEM. Just because for some reason, it wouldn’t pull top end. It would max out around 90mph. Not that that’s bad. Or that you will run at DRZ at 90 mph for any length of time. But swapped back to OEM, and it went 104mph. So I just stuck with it.
@rcvg69420
3 ай бұрын
@@linksgarage1985 Maybe it just needed some main jet tinkering? you go back to an OEM FCR with the same jetting as the clone or back to OEM Mikuni BSR?
@jessecrawford2711 Жыл бұрын
You might as well buy the snap for the boot so it will open it back up I was curious about the cables on that carb it after seeing motocheez and you do it I'll jump on that carb before the price blows up
@linksgarage1985
Жыл бұрын
Hell yea! Thanks for watching!
@jessecrawford2711
Жыл бұрын
@@linksgarage1985 it's a nice bike Deezer nation bro
@linksgarage1985
Жыл бұрын
@@jessecrawford2711 💪🏼
@thisisnotharrypotter Жыл бұрын
your main air jet and pilot air jet are sucking in unfiltered air including dust etc with the red airbox adapter you're using. might want to put some foam over those jets or use a different intake adapter. good luck
@michaelbadolato952
Жыл бұрын
Can you explain that more? Was gonna do this
@Billy00Brayan
Жыл бұрын
I was thinking samething, I believe the confusion happened when he went with the “deweys garage” dude recommendation but problem is dewey did a whole different carb ( the mx version replica) which fits that ebay adapter. If i find a solution to this , would run it
@Billy00Brayan
Жыл бұрын
@@michaelbadolato952 if yu skip to 9:26 on the video, yu will notice 2 small air jets holes that are outside of the red bell adapter, which means they aren’t connected to the airbox, which means they are unfiltered…
@Billy00Brayan
Жыл бұрын
@@michaelbadolato952they sell OEM keihin adapter that joins the 2 air jet holes with the air intake boot. I wouldn’t run the velocity stack (red bell adapter)
@thisisnotharrypotter
Жыл бұрын
@@Billy00Brayan if you mean the keihin adapter 012-216, that has an outer diameter of 60mm. the airbox has 57,5mm. The adapter linked below is a better fit
@RJ-li2xd Жыл бұрын
Its been several months..... do you still recommend the swap ? Or keep it stock ?
@linksgarage1985
Жыл бұрын
Man it’s cool. It def picks it up. If you don’t want to fool with jetting to get it dialed in, do the jd kit on the stock and roll. If you don’t mind tinkering, this one is still cool. Rode it a few hours ago. No issues.
@dropagearnz Жыл бұрын
Any links to where I can find a carb like this? New Zealand based so parts are limited
@linksgarage1985
Жыл бұрын
All links to parts used are in the video description. Thanks for watching!
@norincobro6421
9 ай бұрын
Aliexpress
@Marts14995 ай бұрын
How is this cheap carb holding up? I have an old drz e with the fcr 39. The carb is so beat up and in rough shape I’ve been tempted to just buy this car a be swap them
@linksgarage1985
5 ай бұрын
It hold up. If you have a genuine FCR, I’d keep it. Nothing beats OEM
@Marts1499
5 ай бұрын
@@linksgarage1985 the last owner did some weird stuff with a file and job weld in some spots I can’t seem to get it to run right no matter how much tuning I do lol
@linksgarage1985
5 ай бұрын
@@Marts1499 ahh ,I see. That sucks!
@bypassapk6887 Жыл бұрын
Hello, the ebay link number 3 is no longer available, what is it?
@linksgarage1985
Жыл бұрын
It was just a DRZ E model Intake boot
@jori8245 Жыл бұрын
I’m putting my carb now and hit at little bit on the top frame yours do the same ??
@linksgarage1985
Жыл бұрын
Just barely!
@jori8245
Жыл бұрын
@@linksgarage1985 men I just put everything like you and when I run star making a lot explosions
@linksgarage1985
Жыл бұрын
@@jori8245 that doesn’t sound good
@jaydencrouch3913 ай бұрын
That slip on looks awesome, what is it?
@linksgarage1985
3 ай бұрын
It’s not a slip on. It was a full system. It was a Delkevic unit. I swapped it out to a barkers full system. Much better performance.
@jaydencrouch391
3 ай бұрын
@@linksgarage1985 Thanks so much!
@linksgarage1985
3 ай бұрын
@@jaydencrouch391 very welcome!
@user-wr4qf2hk7b8 ай бұрын
What size fuel line?
@FEGTV-ro9ck7 ай бұрын
When you installed the FCR did you re hey it or keep it as is?
@linksgarage1985
7 ай бұрын
I actually swapped back to OEM carb. Couldn’t get dialed in like I wanted. After numerous jet changes. At 85 mph it was struggling. Stock carb, 105 + mph. 🤷🏻♂️
@FEGTV-ro9ck
7 ай бұрын
@@linksgarage1985 ok, so with the oem carb did you use jd jet kit on it
@FEGTV-ro9ck
7 ай бұрын
Your vids are very helpful by the way bro. Trying to get my drz front wheel up. Need more hp or mods
@linksgarage1985
7 ай бұрын
@@FEGTV-ro9ck man, you don’t need any mods. It’ll wheelie bone stock. 2nd gear clutch up. All day. You gor this! And thanks for watching!
@linksgarage1985
7 ай бұрын
@@FEGTV-ro9ck yes. Full jet kit and 3x3 vid on the channel as well
@josh20109 Жыл бұрын
Any issues with the carb so far?
@linksgarage1985
Жыл бұрын
Nope. Just getting it fully dialed in. Playing with jetting etc. but it rips.
@josephbishop3231 Жыл бұрын
What's with that ignition key position?
@linksgarage1985
Жыл бұрын
I put it there.
@norbertosandoval4826 Жыл бұрын
Why did you have to change the petcock?
@linksgarage1985
Жыл бұрын
I didn’t have to. But I was removing the vacuum petcock that is prone to leaking. This one won’t leave me stranded. It operates on gravity, not vacuum.
@GromBeardo Жыл бұрын
We need a link for the Glock box cutter🤣
@linksgarage1985
Жыл бұрын
Bro. That thing is the shit!!!! www.lowes.com/pd/TOUGHBUILT-Reload-Utility-Knife-2-Blade-Mags/1003168230?cm_mmc=shp-_-c-_-prd-_-tol-_-ggl-_-LIA_TOL_216_Construction-Hand-Tools-_-1003168230-_-local-_-0-_-0&ds_rl=1286981&gbraid=0AAAAAD2B2W9uw6j2UQp2aQbEk_ykVj2Dy&gclid=Cj0KCQiA45qdBhD-ARIsAOHbVdFQKHynGS53eZS43UknJJBtxmjdJHENWQqRT74dnimmTTZOv9hOTZMaAlvKEALw_wcB&gclsrc=aw.ds
@GromBeardo
Жыл бұрын
@@linksgarage1985 Hell Yeah, Brother! Thanks for the link. That thing is badass!
@linksgarage1985
Жыл бұрын
@@GromBeardo it truly is. Use it all the time
@GR40RCapri Жыл бұрын
I’m in the market soon for DRZ400 once I get through a LTZ400 quad project… What years or model DRZ came with FCR ?
@linksgarage1985
Жыл бұрын
Only the DRZ E models came with an FCR I believe.
@michaeljarosz8507 Жыл бұрын
Mine smokes like that too sometimes is that normal
@linksgarage1985
Жыл бұрын
All good.
@robertbillek8540
Жыл бұрын
Mine does too. Every concerning thing about the Drz I’ve ever mentioned people tell me is completely normal…
@skatman38726 ай бұрын
Whats the goal here,Im not touching mine,
@neilbradley657110 ай бұрын
I worked for suzuki for 12 years and am on my third drzSM....stop butchering this machine or at least stop documenting it😢 that 12 foot fuel line was all I could take.
@linksgarage1985
10 ай бұрын
Thanks for watching!
@norincobro64219 ай бұрын
It will run really well with that squashed airbox boot, eh !😅
@MrKidkiller159 Жыл бұрын
So much improperly described info.
@linksgarage1985
Жыл бұрын
Please help me out. Feel free to correct any mistakes I have made. 💪🏼
@MrKidkiller159
Жыл бұрын
You did not remove the Swingarm bolt. Sub frame bolts. It's not a 10mm bolt. It's a 6x1.0 with a 10mm hex head . An the list go's on.
@linksgarage1985
Жыл бұрын
@@MrKidkiller159 sweet. Remake the video for us. I’ll subscribe!
Пікірлер: 155
I think you finally convinced me to swap the carb out. I have an 09 with 126k mi on it. Doing a valve clearance adjustment right now, but might just go all in. Sounds good.
@linksgarage1985
Жыл бұрын
126k miles! That’s impressive! Any major engine work in that time? And I dialed it in. Last video, I installed a 170 main jet. And it freaking rips!
@kevinkillsit
Жыл бұрын
@@linksgarage1985 my DRZ has been my best friend in my motorcycle journey. Her name is Rachel. I don't get too emotional about my other bikes, but I have seen a lot of the world on her and experienced a lot of great things on that shitty stock seat haha. Thinking this year I'm going to do a refresh and get some new parts going for her. I had one issue where I blew the base gasket at around 90kmiles so I did a whole teardown and rebuild back then. Tranny and everything else has been bulletproof. Broke a clutch cable and put a hydraulic on it. Lots of different tires. A few batteries and petcocks too. I geared it 15/38 for the highway to commute on when I got it which is what racked the miles on it. (Taller gears and shorter chain.) Dynojets in the stock carb which I've rebuilt so many times I can't even remember. Yoshimura RS2 exhaust. Coolant changed twice. Brake fluid maybe like 4 times. It doesn't get too hot usually, but now I've started tracking it again. Oil change about every 2k with Lucas full synthetic. Now it stays with a 14/38 most of the time and is my fun bike. I'll try to put up some more videos, it's been a while. Keep up the good work on your channel.
@linksgarage1985
Жыл бұрын
@@kevinkillsit man, this is the coolest shit ever! I think this is badass! The memories made are insane. Think about how much a DRZ cost. And the return you’ve gotten on your investment. Absolutely amazing! I just subbed! I’d love to see an over view of that bike, along with that story you just told. You make the video, and I’ll mention it and send some people your way to check it out. This is the good stuff. Talking to people with stories like that. Thanks for the comment! I appreciate you.
@kevinkillsit
Жыл бұрын
@@linksgarage1985 sounds like a great video idea. I'll have to get started on it so stay tuned!
@linksgarage1985
Жыл бұрын
@@kevinkillsit hell yea. I’d love to see it. Hear about some of the adventures. All the parts replaced etc. that bike might have more documented DRZ miles than any other out there. (Maybe). Just watched your walk around from 9 years ago. Good stuff. Watching others now. Larger gas tank right?
Wow another great video! I will be doing this carb swap for sure. Thank you for doing this, I know DRZ community will love it.
@linksgarage1985
Жыл бұрын
Thank you! Many more videos on the way. Have a merry Christmas!
Your reaction when she fired was awesome. Great video. Looking forward to when it gets warmer to do the exact thing.
@linksgarage1985
Жыл бұрын
Can’t wait until it’s warm man! Going to ride the crap out of it.
You are the real mvp! Awesome video!
@linksgarage1985
Жыл бұрын
Thank you man!!!
Awesome man! Combining two different pieces, to make a good Air seal, ingenious! You better tighten up the chinstrap on your helmet before you test ride that bike! 🚀 Man, you can just tell by the sound of it! 👍
@linksgarage1985
Жыл бұрын
It freaking rips!
Love it Bro! Keep up the good work. I'm so excited, I'm going to fire it up again. hahah
@linksgarage1985
Жыл бұрын
Hell yea! I just rode over an hour is some freezing ass snow. Video coming soon! Ha
thanks to you i bought the drz yesterday and i am very happy heh
@linksgarage1985
Жыл бұрын
Oh hell yea! You’re going to love it!
@dawidbarczak4736
Жыл бұрын
how many miles do you do on a full tank?
@linksgarage1985
Жыл бұрын
@@dawidbarczak4736 stock, I really don’t remember. Probably close to 100 before you hit reserve. I usually fill up around the 85 mile mark. The reserve is .6 gallons. So if you run it out, and swap to reserve, you still have 25 miles or so before you are actually empty.
Great Video ! Love the content! But I recommend getting the oem adapter bro , yur air jets are suckin in unfiltered air ….( 2 holes underneath the red velocity adapter) “red bell adapter” as some may call it
@linksgarage1985
Жыл бұрын
All good. Thanks man
Thank you for this video! In the process of doing a similar install and the fact that I need to take off the rear portion of the exhaust, the breather box and partially disassemble the carb to then fight with the thing to even fit has me legitimately considering just getting my bike running and immediately selling it lol. I've owned a bunch of carbed bikes and never had to fight so hard to remove and install a carb on one of them
@linksgarage1985
Жыл бұрын
You actually don’t have to do any of that. Just makes it easier. Just pop up sub frame bolt and it’ll come out. I’ve done it 246 times that way.
You the man.
@linksgarage1985
Жыл бұрын
Thanks dude. Got more on the way! 💪🏼
Nice to know it isn't a direct bolt in, but nothing that someone with a little ability to do modifications can't handle. Sounds crisp.
@linksgarage1985
Жыл бұрын
For sure. I could have just chopped the red cone, and smashed it in the rubber airbox boot. But fugggg that. I wanted it to be tight. Works great so far. When it warms up, I’m going to do some serious testing with it. 💪🏼
Like the new lift
@linksgarage1985
Жыл бұрын
Thank you. It’s a huge back saver!
Круто!!! Супер Мото! FSR 39 Power ;)
@linksgarage1985
Жыл бұрын
Thanks for watching I appreciate it!
Your thé Best!!
@linksgarage1985
5 ай бұрын
Thank you
I’m not sure if the DRZ is the same concept, but on a YZ450, it’s easier to loosen the top subframe bolts, remove the bottom ones. It allows the tail to pivot over to where the gas tank sits originally.
@linksgarage1985
Жыл бұрын
I’ll try it that way next time!
Interesting...! I live out west, have a desert tank and absolutely have to go 200 miles between the only fuel stops in northern Utah. Did you note a change in MPG? If so, from what on stock carb to what on FCR? Many thanks.
🔥
@linksgarage1985
Жыл бұрын
Thank you!
Hey mate your work is excellent just a quick one what jets did you end up using ?
@Stevesmate4503
Жыл бұрын
All good mate I watched part 1. Should of done that first haha. Unless you have changed them
Hope this helps! 💪🏼
@Xxnate500
Жыл бұрын
Helped a lot man!
@linksgarage1985
Жыл бұрын
@@Xxnate500 glad to hear it!
Just curious your thoughts after a month? Just purchased a DRZ and was curious if it would be worth spending the extra money to go this route instead of just jetting the original carb.
@linksgarage1985
Жыл бұрын
Love it
Ayyyeee. There ya go. So how is it?? Bout to order mine today. Thank you bro. Am I going to need the E model fitting you linked? Will the stock work if I rig it lol Oh an I noticed your 22 doesnt have the vacuum fuel hose. Basically when you take your tank off my 2014, you disconnect your petcock and right behind it is the vacuum line. Then you can pop off your tank. Didn’t see that with yours. Might be the newer models. I simplified my oiI over flow. Deleted the black box and have the air hose that connects on the top of the engine routed counterclockwise up under the tank and going over the frame so it peaks out in front of the tank then down along side the top of the engine then back up the right. I have a small air filter on the end of the hose an it’s positioned up right next to the radiator cap. Then caped off the 1 hose on the back right. She rips. Looks cleaner.
@linksgarage1985
Жыл бұрын
Hell yea! And I deleted all the vacuum stuff and the PAIR valve. Maybe that’s why it’s gone. I’ve been thinking of getting rid of the black box. Just haven’t done it yet. Thanks for watching I appreciate it!
What were the other two links I can view petcock and carb itself… I’m guessing the e boot and adapter links closed out?
Where did you get your face clone from and can you post the link. Thanks I love the videos keep them coming.
I've been looking at this actual carb for my DRZ, hope it works out
@linksgarage1985
Жыл бұрын
It rips!
@callmewes5121
Жыл бұрын
@@linksgarage1985 that's rad, and they are inexpensive as well. Damn them Chinese products 😂.
So I’ve got a drz400s ‘05. Will this part list work on my bike? I want to give it a try myself
Great video. I just followed your recipe and am amazed what an upgrade this is. Super helpful! Couple questions. I am finding my choke will not stay on when I pull it out. It just snaps back off. Are you having that issue? I also noticed that if I give it a quick jolt of throttle from idle sometimes it dies....I solved it by idling it up but that seems like a hack. I am using 45 pj, 160mj, and 2 turns on the screw. Any ideas?
@linksgarage1985
Жыл бұрын
Hmm. Jetting sounds good. And as far as the choke goes, no. I don’t have that issue. Does it idle ok?
@sswayne1
Жыл бұрын
@@linksgarage1985 Yeah, it idles fine. Just maybe a tad high. I think the main jet is good. Might play with the screw. For the choke, I just wrapped a zip tie around the rubber boot and it tightened it up and now it stays in place. Easy fix. Thanks again for the video!
@linksgarage1985
Жыл бұрын
@@sswayne1 thanks for watching!!! Need anything just ask!
@norincobro6421
9 ай бұрын
Your AP is weak
Good thumbnail
@linksgarage1985
10 ай бұрын
Thanks! 💪🏼
Notice any difference in range on one tank? I considered this but it seems many people struggled to get them dialed in correctly and it staying dialed in compared to the actual FCRs.
@linksgarage1985
Жыл бұрын
Haven’t ran a full tank in it yet. Been pretty cold
Aren't there two jets open to unfiltered air if you use the red air horn?
Great video!!! What size fuel line would I need? Also, how’s it holding up? Thanks!!!
@linksgarage1985
Жыл бұрын
Holding up well. Here’s the fuel hose I swapped to. Max-Motorsports 4' x 1/4 ID (6.4mm) x 3/8 OD Fuel Hose Line Mx ATV Dirtbike (Clear Purple) 1/4in ID x 3/8in OD a.co/d/iMmkdvO
@Billy00Brayan
Жыл бұрын
@@linksgarage1985 size on the one that fit (clear ) ??
Hopefully not to obviously of a answer but when I hit the link for the carb and put my bike year (17) is says it not the correct one. Thanks for all that you do. Love your videos!
@linksgarage1985
Жыл бұрын
No problem! I just checked the link, and it’s correct. They are the same from 05-23. Thank you for watching and commenting!
@terryerickson4697
Жыл бұрын
Thanks
Great video Brother...how reliable is this carb? Running into any problems along the way...sounds fire man!
@linksgarage1985
5 ай бұрын
It was reliable. I couldn’t get the jetting dialed in exactly how I wanted. So I swapped it back to the OEM carb.
@claytonvanrooyen3582
5 ай бұрын
Thanks man i appreciate the feedback
@claytonvanrooyen3582
5 ай бұрын
Hey Bro so j d jetkit with stock carb ? Thanks Brother
@linksgarage1985
5 ай бұрын
@@claytonvanrooyen3582 that’s what I did. Bike runs well. It’ll hit 105 mph ish
Its better than 3x3 jdjetting
Great info but im looking for more. Which size did you order for your drz on Amazon and why?
@linksgarage1985
Жыл бұрын
I didn’t get it from Amazon. All info here. More videos on the channel. kzread.info/dash/bejne/q558layKcbq3cZc.html
@supermoto_problems
Жыл бұрын
Thank you! I checked out Amazon and it was about $312. 😅
@linksgarage1985
Жыл бұрын
@@supermoto_problems I have a feeling once the word gets out, the prices might go up Lol.
I have a question today I mounted my carburetor and it makes a pop noise like when it accelerates, it's like it lacks gas or air and since I don't know much about this, that's why I'm asking you, I don't know if it's the jetting
@melvinnevarezelmenol6226
Жыл бұрын
if you could give me some advice
I HAVE NEVER seen a need to move the subframe to remove the carb. You can pull the airbox boot towards the airbox, and collapse it on itself enough to clear the carb and pull it off.
@linksgarage1985
Жыл бұрын
Sweet!
How has the clone FCR been for you long term? Holding up well?
@linksgarage1985
3 ай бұрын
It held up just fine. I did swap back to OEM. Just because for some reason, it wouldn’t pull top end. It would max out around 90mph. Not that that’s bad. Or that you will run at DRZ at 90 mph for any length of time. But swapped back to OEM, and it went 104mph. So I just stuck with it.
@rcvg69420
3 ай бұрын
@@linksgarage1985 Maybe it just needed some main jet tinkering? you go back to an OEM FCR with the same jetting as the clone or back to OEM Mikuni BSR?
You might as well buy the snap for the boot so it will open it back up I was curious about the cables on that carb it after seeing motocheez and you do it I'll jump on that carb before the price blows up
@linksgarage1985
Жыл бұрын
Hell yea! Thanks for watching!
@jessecrawford2711
Жыл бұрын
@@linksgarage1985 it's a nice bike Deezer nation bro
@linksgarage1985
Жыл бұрын
@@jessecrawford2711 💪🏼
your main air jet and pilot air jet are sucking in unfiltered air including dust etc with the red airbox adapter you're using. might want to put some foam over those jets or use a different intake adapter. good luck
@michaelbadolato952
Жыл бұрын
Can you explain that more? Was gonna do this
@Billy00Brayan
Жыл бұрын
I was thinking samething, I believe the confusion happened when he went with the “deweys garage” dude recommendation but problem is dewey did a whole different carb ( the mx version replica) which fits that ebay adapter. If i find a solution to this , would run it
@Billy00Brayan
Жыл бұрын
@@michaelbadolato952 if yu skip to 9:26 on the video, yu will notice 2 small air jets holes that are outside of the red bell adapter, which means they aren’t connected to the airbox, which means they are unfiltered…
@Billy00Brayan
Жыл бұрын
@@michaelbadolato952they sell OEM keihin adapter that joins the 2 air jet holes with the air intake boot. I wouldn’t run the velocity stack (red bell adapter)
@thisisnotharrypotter
Жыл бұрын
@@Billy00Brayan if you mean the keihin adapter 012-216, that has an outer diameter of 60mm. the airbox has 57,5mm. The adapter linked below is a better fit
Its been several months..... do you still recommend the swap ? Or keep it stock ?
@linksgarage1985
Жыл бұрын
Man it’s cool. It def picks it up. If you don’t want to fool with jetting to get it dialed in, do the jd kit on the stock and roll. If you don’t mind tinkering, this one is still cool. Rode it a few hours ago. No issues.
Any links to where I can find a carb like this? New Zealand based so parts are limited
@linksgarage1985
Жыл бұрын
All links to parts used are in the video description. Thanks for watching!
@norincobro6421
9 ай бұрын
Aliexpress
How is this cheap carb holding up? I have an old drz e with the fcr 39. The carb is so beat up and in rough shape I’ve been tempted to just buy this car a be swap them
@linksgarage1985
5 ай бұрын
It hold up. If you have a genuine FCR, I’d keep it. Nothing beats OEM
@Marts1499
5 ай бұрын
@@linksgarage1985 the last owner did some weird stuff with a file and job weld in some spots I can’t seem to get it to run right no matter how much tuning I do lol
@linksgarage1985
5 ай бұрын
@@Marts1499 ahh ,I see. That sucks!
Hello, the ebay link number 3 is no longer available, what is it?
@linksgarage1985
Жыл бұрын
It was just a DRZ E model Intake boot
I’m putting my carb now and hit at little bit on the top frame yours do the same ??
@linksgarage1985
Жыл бұрын
Just barely!
@jori8245
Жыл бұрын
@@linksgarage1985 men I just put everything like you and when I run star making a lot explosions
@linksgarage1985
Жыл бұрын
@@jori8245 that doesn’t sound good
That slip on looks awesome, what is it?
@linksgarage1985
3 ай бұрын
It’s not a slip on. It was a full system. It was a Delkevic unit. I swapped it out to a barkers full system. Much better performance.
@jaydencrouch391
3 ай бұрын
@@linksgarage1985 Thanks so much!
@linksgarage1985
3 ай бұрын
@@jaydencrouch391 very welcome!
What size fuel line?
When you installed the FCR did you re hey it or keep it as is?
@linksgarage1985
7 ай бұрын
I actually swapped back to OEM carb. Couldn’t get dialed in like I wanted. After numerous jet changes. At 85 mph it was struggling. Stock carb, 105 + mph. 🤷🏻♂️
@FEGTV-ro9ck
7 ай бұрын
@@linksgarage1985 ok, so with the oem carb did you use jd jet kit on it
@FEGTV-ro9ck
7 ай бұрын
Your vids are very helpful by the way bro. Trying to get my drz front wheel up. Need more hp or mods
@linksgarage1985
7 ай бұрын
@@FEGTV-ro9ck man, you don’t need any mods. It’ll wheelie bone stock. 2nd gear clutch up. All day. You gor this! And thanks for watching!
@linksgarage1985
7 ай бұрын
@@FEGTV-ro9ck yes. Full jet kit and 3x3 vid on the channel as well
Any issues with the carb so far?
@linksgarage1985
Жыл бұрын
Nope. Just getting it fully dialed in. Playing with jetting etc. but it rips.
What's with that ignition key position?
@linksgarage1985
Жыл бұрын
I put it there.
Why did you have to change the petcock?
@linksgarage1985
Жыл бұрын
I didn’t have to. But I was removing the vacuum petcock that is prone to leaking. This one won’t leave me stranded. It operates on gravity, not vacuum.
We need a link for the Glock box cutter🤣
@linksgarage1985
Жыл бұрын
Bro. That thing is the shit!!!! www.lowes.com/pd/TOUGHBUILT-Reload-Utility-Knife-2-Blade-Mags/1003168230?cm_mmc=shp-_-c-_-prd-_-tol-_-ggl-_-LIA_TOL_216_Construction-Hand-Tools-_-1003168230-_-local-_-0-_-0&ds_rl=1286981&gbraid=0AAAAAD2B2W9uw6j2UQp2aQbEk_ykVj2Dy&gclid=Cj0KCQiA45qdBhD-ARIsAOHbVdFQKHynGS53eZS43UknJJBtxmjdJHENWQqRT74dnimmTTZOv9hOTZMaAlvKEALw_wcB&gclsrc=aw.ds
@GromBeardo
Жыл бұрын
@@linksgarage1985 Hell Yeah, Brother! Thanks for the link. That thing is badass!
@linksgarage1985
Жыл бұрын
@@GromBeardo it truly is. Use it all the time
I’m in the market soon for DRZ400 once I get through a LTZ400 quad project… What years or model DRZ came with FCR ?
@linksgarage1985
Жыл бұрын
Only the DRZ E models came with an FCR I believe.
Mine smokes like that too sometimes is that normal
@linksgarage1985
Жыл бұрын
All good.
@robertbillek8540
Жыл бұрын
Mine does too. Every concerning thing about the Drz I’ve ever mentioned people tell me is completely normal…
Whats the goal here,Im not touching mine,
I worked for suzuki for 12 years and am on my third drzSM....stop butchering this machine or at least stop documenting it😢 that 12 foot fuel line was all I could take.
@linksgarage1985
10 ай бұрын
Thanks for watching!
It will run really well with that squashed airbox boot, eh !😅
So much improperly described info.
@linksgarage1985
Жыл бұрын
Please help me out. Feel free to correct any mistakes I have made. 💪🏼
@MrKidkiller159
Жыл бұрын
You did not remove the Swingarm bolt. Sub frame bolts. It's not a 10mm bolt. It's a 6x1.0 with a 10mm hex head . An the list go's on.
@linksgarage1985
Жыл бұрын
@@MrKidkiller159 sweet. Remake the video for us. I’ll subscribe!
What size fuel line?