The little sister of the Druckzünder 35 A. Same fuze smaller package.
Жүктеу.....
Пікірлер: 24
@toothlesszilla99822 жыл бұрын
Eeek mine dot blow me up
@Tunkkis Жыл бұрын
I wish there were acceptable drawings for these, they look like interesting metal shop projects.
@Stray03
Жыл бұрын
Would be nice to have the blueprints.
@JOHNWICK-hn3ng2 жыл бұрын
مرحبا شكرا لك
@Stray03
2 жыл бұрын
على الرحب والسعة
@mjlr4369 Жыл бұрын
thanks for the videos and explanation, specially live primer testing, can that dz35-b able to use as an impact fuze for mortar round ?
@Stray03
Жыл бұрын
Assuming it doesn't get set off when firing it I assume you could. Problem is the chances are it will be set off from the launch.
@ericsheppard698410 ай бұрын
I have a very good condition D.Z.35B but the firing pin is not as free moving in the sleeve as yours. In fact I'm afraid to push it further up the sleeve in case it gets stuck. In your experience is the firing pin the same as that in the Zu.Z.Z.35? Would much appreciate a response. Thank you!
@Stray03
10 ай бұрын
Try putting it in a small ultrasonic cleaner. I don't remember exactly but i think they are similar. I have a video on the other one so you can look to see.
@ericsheppard6984
10 ай бұрын
Many thanks @@Stray03
@Stray03
10 ай бұрын
No problem.
@scrappydoo78872 жыл бұрын
Mine fuze?
@Stray03
2 жыл бұрын
Mine and often used in booby Traps.
@scrappydoo7887
2 жыл бұрын
@@Stray03 I've always had a really strong interest in booby traps and their components especially the OSS and SOE components. The general level of sneakiness and devious intelligence has always appealed to me lol
@Stray03
2 жыл бұрын
Lol yeah I like the fuzes for that reason too. Maybe if I find some at good prices I will get some Brit ones..
@chemistryofquestionablequa62522 жыл бұрын
Are you Canadian? I noticed you said "zed". I'm in southwestern Ontario.
@Stray03
2 жыл бұрын
Yes I am.
@chemistryofquestionablequa6252
2 жыл бұрын
@@Stray03 right on. It's just a shame that our government sucks as much as it currently does.
@Stray03
2 жыл бұрын
@@chemistryofquestionablequa6252 Well with any luck they will be tossed out at the next one.
@chemistryofquestionablequa6252
Жыл бұрын
@@Stray03 ended up moving to Arkansas where my wife is from. Things were getting really bad in London Ontario.
@Stray03
Жыл бұрын
@@chemistryofquestionablequa6252 Nice, I am somewhat jealous.
@crawwwfishh32842 жыл бұрын
Do me one on how to make killer smoke bombs. I know u know.
@Stray03
2 жыл бұрын
Lol nothing Any better than others online.
@chemistryofquestionablequa6252
2 жыл бұрын
Check out the channel "tech ingredients" they have a couple videos on good ones. Chlorate or nitrate based.
Пікірлер: 24
Eeek mine dot blow me up
I wish there were acceptable drawings for these, they look like interesting metal shop projects.
@Stray03
Жыл бұрын
Would be nice to have the blueprints.
مرحبا شكرا لك
@Stray03
2 жыл бұрын
على الرحب والسعة
thanks for the videos and explanation, specially live primer testing, can that dz35-b able to use as an impact fuze for mortar round ?
@Stray03
Жыл бұрын
Assuming it doesn't get set off when firing it I assume you could. Problem is the chances are it will be set off from the launch.
I have a very good condition D.Z.35B but the firing pin is not as free moving in the sleeve as yours. In fact I'm afraid to push it further up the sleeve in case it gets stuck. In your experience is the firing pin the same as that in the Zu.Z.Z.35? Would much appreciate a response. Thank you!
@Stray03
10 ай бұрын
Try putting it in a small ultrasonic cleaner. I don't remember exactly but i think they are similar. I have a video on the other one so you can look to see.
@ericsheppard6984
10 ай бұрын
Many thanks @@Stray03
@Stray03
10 ай бұрын
No problem.
Mine fuze?
@Stray03
2 жыл бұрын
Mine and often used in booby Traps.
@scrappydoo7887
2 жыл бұрын
@@Stray03 I've always had a really strong interest in booby traps and their components especially the OSS and SOE components. The general level of sneakiness and devious intelligence has always appealed to me lol
@Stray03
2 жыл бұрын
Lol yeah I like the fuzes for that reason too. Maybe if I find some at good prices I will get some Brit ones..
Are you Canadian? I noticed you said "zed". I'm in southwestern Ontario.
@Stray03
2 жыл бұрын
Yes I am.
@chemistryofquestionablequa6252
2 жыл бұрын
@@Stray03 right on. It's just a shame that our government sucks as much as it currently does.
@Stray03
2 жыл бұрын
@@chemistryofquestionablequa6252 Well with any luck they will be tossed out at the next one.
@chemistryofquestionablequa6252
Жыл бұрын
@@Stray03 ended up moving to Arkansas where my wife is from. Things were getting really bad in London Ontario.
@Stray03
Жыл бұрын
@@chemistryofquestionablequa6252 Nice, I am somewhat jealous.
Do me one on how to make killer smoke bombs. I know u know.
@Stray03
2 жыл бұрын
Lol nothing Any better than others online.
@chemistryofquestionablequa6252
2 жыл бұрын
Check out the channel "tech ingredients" they have a couple videos on good ones. Chlorate or nitrate based.