Hey I’ve got a question abt the glueing process. I’ve seen that some Antispin runbers require an rubber glue sheet bc you shouldn’t use wet glue on the sponges, but some don’t and can be glued as normal rubbers. My question would be what ur experience with the differences are and if you glued ur abs 2 pro with one of these glue sheets. I know it’s been a year since your video, but I’d happy to receive an answer of you, any Tipps or recommendations help. Thank youu 😁🙏

@LittleMT1982

3 ай бұрын

Using glue sheets is just for safe removal in order not to hurt the blade. Because some antispin sponges can stick to the blade if you don’t use glue sheets. Other than this reason, there’s no big difference.

@leviismyfuturehusband._.1751

3 ай бұрын

@@LittleMT1982 okay thank you for ur information 🙏 so it’s totally fine to wet glue these runners, it’s only a safety reason to prevent wood splinters from Beeing ripped of a blade.👌

Nice review!

deluxe carbon and matador texa carbon please 🙏

How does it compare to the abs 2 ? How would it compare to barna superglanti which is what I am currently using ? I see the spin reversal is affective but for me it s also important to be able to attack with it aggressively . Thanks

@LittleMT1982

2 жыл бұрын

ABS2 has bad durability. Also evo and pro version can make short blocks easier. But I think superglanti is just as good as them. But I haven’t played glanti yet, so I can’t tell you for sure. As for attacking, I think evo and pro version can both do well even if you want to attack more often.

@rakishman1313

2 жыл бұрын

@@LittleMT1982 sounds fair. I have actually never used ABS 2 only tried my friends paddle with the evo version . I found it ok with 2.3 mm thickness. I tried storkraft which i absolutely didnt like and used superglanti the most it has the best deception amongst the ones I played and the most reversal though reversal wears out over time, it s low throw. I will most likely buy it again as I need a replacement.

@rakishman1313

2 жыл бұрын

also made couple videos about SG feel free to check em out

@e4syybeatbox637

2 жыл бұрын

@@rakishman1313 what can you say about the super glanti's durability? I want to try this one, but i'm a little afraid about the durability is low. Let me know, thanks!

@rakishman1313

2 жыл бұрын

@@e4syybeatbox637 over time the top sheet loses its slickness . Probably it s about after 1.5 months it starts declining . I ordered 3 and played with different blades for a while: the sponges are soft and top sheet is very vulnerable to accidental table hits so it can fall apart very quickly compared to inverted or pips rubbers . You can still play with it for months after slickness wears off but the spin reversal will be less. I ordered its special cleaner this time hoping that it will protect slickness for more . Will see

bro, do u think abs version is good for the fast blade like mima ito carbon? i use mima ito carbon and ox long pimple,, want to try this antispin rubber, pls give advice 🙏🏽

@LittleMT1982

2 жыл бұрын

I think the spin reversal will still be good. But blocking short might not be that easy. However, antispin rubber is a very unpredictable realm, go ahead and try is the best way to find out.

bro, please review this ABS 2 Pro.. how it goes? I use ABS 2 evo 2.5mm sponge, I like it.. I wanna buy another anti spin for my other blade, maybe ABS 2 pro or maybe DMS diabolic extra slow...

@LittleMT1982

2 жыл бұрын

I wrote the review on the video description box, you can go read it. If you like evo version already, you can stay with it and you will do fine. By the way, the spin reversal of Diabolic extra slow does not last very long, just remember that.

@teguhdharmawangsa6514

2 жыл бұрын

@@LittleMT1982 thank you very much for answering my question.. I've read your review.. which I can understand, that ABS 2 pro has a better feeling touch, it feels more crispy maybe.. other than that nothing special than the evo version..

Здравствуйте какая доска у вас? Какая толщина антиспина ? Заранее спасибо

@LittleMT1982

Жыл бұрын

My blade is Der Materialspezialist Trouble. Backhand sponge thickness is 2.0mm.

@user-hq7rs5pl4d

Жыл бұрын

@@LittleMT1982 спасибо большое

@user-hq7rs5pl4d

Жыл бұрын

@@LittleMT1982 а чёрная накладка какая которая тянет что за фирма и какая толщина?

@LittleMT1982

Жыл бұрын

@@user-hq7rs5pl4d Sorry man, my iPad can’t translate your language. You wanna try English?