Oh I forgot to mention, the cellphone holder does not charge your phone. It barely holds it in place. Thanks for watching. :D

@Samurai-ew1io

3 жыл бұрын

Lol

@sameerbhandari9785

3 жыл бұрын

Hey dawid, firstly i love your scripts and videos, and secondly I WOULD VERY MUCH LIKE TO SEE YOU TRY AND MAKE A NOCTUA VERSION. DAWID DOES DIY🤩

@mattalford3932

3 жыл бұрын

But how much cooler would it be with the bottom cover removed from the laptop lol?

@mattalford3932

3 жыл бұрын

Can you make a gt 1030 better than a 750ti? Every test I've seen only shows around a 10fps difference. The new farming simulator lists the 750ti in it minimum requirements lol.

@jamie_po2176

3 жыл бұрын

If it was 5 kraken nzxt fans that would have better results idk if you can replace the original fans ?

Definitely Want to see a homemade noctua laptop cooler I bet with those industrial noctua 3000rpm fans would be dope

@ultimatenoobster6477

3 жыл бұрын

That would actually be cool

@FOOTYM10

3 жыл бұрын

That would be cool af haha "pun intended"

@christopherbartlett2153

3 жыл бұрын

I have those industrial fans, not sure if mine were defective but they get really loud.

@markusz2n

3 жыл бұрын

@@christopherbartlett2153 Well, any fans, no matter how good, get loud at 2000 or 3000 RPM. So no, your fans were not defective unless you got something like a ticking or grinding noise from the bearings or motors.

@DuneRunnerEnterprises

3 жыл бұрын

Yeah,me too

Well here's your problem: the cooling cores aren't hyperthreaded. They would cool 2x as fast if they were hyperthreaded.

@ajinpjseph4014

3 жыл бұрын

yeah it should have been unlocked so as to overclock it

@TechWithSean

3 жыл бұрын

If you uninstall the cooler's Spectre and Meltdown patches, it increases cooling by 9% but leaves your hyperthreaded fans open to speculative execution attacks.

@michaelleeper3649

3 жыл бұрын

Lmao

@HairyScrambler

3 жыл бұрын

.. I don’t like you 😂

@cyb69

3 жыл бұрын

Although not quite cuz hyperthreading puts additional load on the cores which makes it not scale linearly

I NEED this my laptop only has 2 cores I could use an extra 6

@MattSpooner69

3 жыл бұрын

According to one of his last videos my laptop has 1540 cores sooo

@official.m-16

3 жыл бұрын

@@MattSpooner69I have 69,420 cores

@dracopug

3 жыл бұрын

@@official.m-16 each clocked at 4269 megahertz

@DawidDoesTechStuff

3 жыл бұрын

Haha!! It should really help.

@mrgreggyspike513

3 жыл бұрын

Hahahah

Your commitment to calling it a Coorel through the video is highly commendable 😂

@WillFuI

3 жыл бұрын

Wait is this the actual Anna?

@HotdogNoire

3 жыл бұрын

@@WillFuI no, it's a filthy Anna impersonator.

@Slidified

3 жыл бұрын

Anna as much as you seem like a kind person. Dawid is mine. Get away from my man

@AnnaDoes

3 жыл бұрын

@@WillFuI I am the actual Anna! 🥸

@AnnaDoes

3 жыл бұрын

@@HotdogNoire not an impersonator 🤫🤭

Oh Dawid, I'd love to see a cobbled together noctua laptop cooler stand!

@EfelerGibi

3 жыл бұрын

sorry Mr did you mean to say Coorel?

@CaveyMoth

3 жыл бұрын

Perfect color scheme to fit the skid marks.

@theprogrammer1

3 жыл бұрын

I cobbled one together from 2*120mm generic case fans, spliced to a USB cable to run them at 5V (yes I know this might kill these generic case fans, but they're generic case fans, I'll just replace them with other generic ones). It actually helps a lot for my laptop when it's compiling, as otherwise it just starts to thermal throttle.

@First-Name_Last-Name

3 жыл бұрын

Cobble the Noctua fans to a laptop cooler. Resell and rebrand it as Notcua, Since there's already a Coorel Mestar.

YES!!! We do want a Noctua fan test 😊😙

@raven4k998

3 жыл бұрын

yes we want him to gut that six core cooler and give it Noctua fan upgrade muhahahahahahahaha

@CaveyMoth

3 жыл бұрын

I wish Noctua made Coorels.

Say "6-core Deep Cooling Laptop Coorel" 5 times real fast

@jasonander4964

3 жыл бұрын

Literally the first time I try I go “sip core”

@georged5420

3 жыл бұрын

I tried and I failed miserably.

@DawidDoesTechStuff

3 жыл бұрын

Haha!! It's a bit of a tongue twister.

@seriousturn957

3 жыл бұрын

I really thought it was going to be tough but my brain aced it lol

@DOHA104p3

3 жыл бұрын

@@jasonander4964 I was like 6 core Deed cooping haha

I’ve been using this exact stand for the last 6 months and it’s been working great for me, the difference for me while using it can be 50% more frames, the reason that I think that my results are so much better is my laptop is a gateway creator series which has a very open bottom which lends itself well for the fans pushing air in it. Definitely depends on the cooling system of the laptop that you are using it with.

"Vicious Cat Sneeze" was the name of my band in college.

I use a similar cooling stand for my laptop, the fans move a fair bit of air. I've never done temp testing with it, but I am usually using it in situations where the laptop would actually be on top of my lap. It's a big comfort help there.

I love watching the journey you take us on each and every episode. They are witty and very entertaining. Keep it up.

I have a laptop cooling pad very similar to this one and it's pretty amazing. Simple, well built and does what I need it to do. Only 5 cores tho... but it's super quiet.

@v.helenasantos9271

Жыл бұрын

Name pls

OMG, please do a DIY Noctua version of this Coorel, that is such a promising idea :)

I can say from personal experience that strapping a set of two professional entertainment system 120mm fans (with a comparable CFM rating to the classic Noctua fans that you suggested) to almost the exact same model "cooling" mat knocked my temps down another 5-7°C on both my CPU and GPU. These pads seem easy to take apart and mod. I'd love to see how that ends up working out in another video!

I subscribed and like every video because you don't have ads in between your videos unlike a lot of other content creators who add 5-6 ads in videos with similar time as yours.

If you’re gonna have the laptop lid closed and plugged into a monitor, why not just flip the laptop upside down so the fans are facing up and not blocked

@sussvchost2094

3 жыл бұрын

Definitely me, but it's better to you put mini standing fan facing it with full power😂

@shaneeslick

3 жыл бұрын

🤔 when has Logic ever been employed in a Dawid Experiment 🤣🤣🤣🤣🤣

@ollep9142

3 жыл бұрын

Having the lid open provides better cooling. The keyboard is meant to be part of the cooling system.

@Living-gnu-64

3 жыл бұрын

@@ollep9142 blocking some small ventilation in the keyboard>choking the entire set of fucking fans

@user-mc6vi8yd7l

10 ай бұрын

Then the coorel would be cooring the top of the screen lol

My favorite part is Dawid's "Thiddy" shirt. I need one.

Definitely make one with large fans. My Targus one saved my lap one particularly hot summer. Using two fans it’s quiet and has a basic hide in shadows design. The neoprene makes it comfy in the lap as well. No adjustment for tilt though.

Hey Dawid, Ive been lurking on your channel for some time now, and I just got done binging everything! Your channel is a breath of fresh air in the tech community and I just wanted to say thank you! (Also yes, I really want to see the "Coorel" with Noctua fans!)

Okay, now strap some beefy 120 or 140mm fans under the stand and see how it performs

Definitely want to see a home made version!!

Entertaining and informative as always! Would love to see the beast mode Noctua version of this

I bought the KLIM wind laptop cooler from amazon. It works great, dropped my GPU temps from 71C to 61C.

I do a fair bit of 3D rendering on my 8-core Ryzen laptop and have found that these types of stands do help maintain higher clocks, which can shave a meaningful amount of time off a day-long render job. They're also nice for providing elevation when I'm drawing on the screen with a stylus. That said, a cookbook stand will get you most of the way there for less money.

would the laptop get better thermals if left open? I feel like some extra heat would dissipate passively through the keyboard, compared to how its somewhat insulated by the screen

@benanderson89

3 жыл бұрын

Yes, it would. Depending on the model of laptop, the excess heat so close to the display could also warp the panel.

@FirstNameLastName-tx6td

3 жыл бұрын

Yes I have the same laptop and never hit 90C with the lid open on a flat table unless it's a stupidly hot day.

I would love to see you make your personalised laptop cooler. Keep it up

Thats fancy. The fans in my old laptop died so I drilled two holes in the back and stuck a couple of 120mm fans on it. A bit bulky and ghetto but did the job very nicely. Never overheated ever again :)

Honestly, I'm really interested in the cooling performance of it.

@ashibilev

3 жыл бұрын

cooring*

I would imagine it makes a big difference how the laptop has the intake and if it lines up with the fans on the stand or not.

@DawidDoesTechStuff

3 жыл бұрын

Oh for sure. The two big fans on the cooler do line up pretty well.

@briancollora481

3 жыл бұрын

@@DawidDoesTechStuff should test it with the bottom off the laptop

Video is very good. Not long ago, I bought a renhotecic brand computer cooling pad, and after using it for a while, the effect felt ok. It is recommended that friends in need can try to prepare one.

Unless I'm mistaken, USB can only provide 5 Watts unless a higher or fast charging rate is negotiated. That means every single one of those fans is splitting 500 milliamp at 5 volts. I would personally just rewire this so the fans are getting fed a 12-volt source instead of a 5-volt source, and just run a small 12 volt inverter. Might be something worth trying.

I would like to see the Noctua version of this coorel.

Try and swap the fans out inside. I don’t know if that’s possible, but that would be cool!

Targus Laptop Chill Mat worked extremely well for my Lenovo and MSI laptops. I don't even use the fans but the elevation allows the laptop fans better flow.

Before you even mentioned it, I thought "what if he made his own mesh with noctua fans mounted to it? Doesn't seem hard, get a mesh office monitor stand, noctua fans, zip ties, and a USB fan hub and it's a done deal.

If it can allow you to run google chrome without dying, yeah, it can work

@dracopug

3 жыл бұрын

15 year old pentium 4 laptops be like:

I've been needing a new coreel

its funny that you mentioned making one. i was like need to get a far more beefy unit to see how it does.

Always nice when Dawid uploads ;)

Not gonna lie, the lights don't look bad.

ah yes my favourite "Laptop Coorel"

please make one! Dawid makes tech stuff needs to be a thing lolol

dude, this channel is growing fast. makes me happy

Why does everyone think “Coorel” in the title is a mistake?

@MattSpooner69

3 жыл бұрын

Why do you not?

@ashibilev

3 жыл бұрын

@@MattSpooner69 because he said it like 30 times in the video and its literally written on it

@Ja-K

3 жыл бұрын

I don't see anything wong with it..

@MattSpooner69

3 жыл бұрын

@@ashibilev this company also refers to fans as "cores" so I'm not trusting anything I see on the box. Besides I've never ever once seen Dawid run with a joke in any of his videos nope, nuh uh, not Dawid.

How many times did you accidentally call it a "cooler" and have to redo the take? lol

Definitely make a Noctua version. I'd love to see the whole build and the effect

Laptop stands like that don't seem like a bad idea. I used one for my netbook, but the stand was literally a couple of quid, and I never used the fans. Its purpose was just to raise the laptop up a bit behind my desktop's keyboard for MAXIMUM MULTITASKING

This guy is like the Doug Demuro of tech.

@pufaxx

3 жыл бұрын

No. Dawid's videos don't always start with "This". 😉

@MeatisMagic256

3 жыл бұрын

Except Dawid's actually funny. Doug's just everyone's dad.

@EmergencyChannel

3 жыл бұрын

I don't like Doug's humor, too snarky for me

Please do a video where all you do is say the words "cooooling", "sloooow" and "lowest" over and over again. And maybe throw in a "Aaaaay!" once in a while just to mix it up.

Noctua makes a 200 mm PWM fan. Use that, some mesh and a thermistor, and I suspect you'd have a nice cooling potential.

I'm still happy with my MSI gaming laptop. Lots of air vents on the bottom so it doesn't overheat like my other laptops used to. And yes please on your homemade laptop cooler! Would love to see it!

"For those of you that have problems with skid marks" Yeah, everyone's 13 and under that's watching this 😂🤣

My mom got this for my chromebook... it doesn’t even have fans

@GojiHusky

3 жыл бұрын

😂 dang. But hey I like the profile picture!

@BlindingWulf

3 жыл бұрын

@@GojiHusky Thx

Good video as usual. The big thing when buying a cooling stand is that all the fans on the planet won't help if they don't line up with the laptops fans.

I've not found a better laptop cooling/podium than the Road Tools Podium Cool Pad I bought for my insanely hot 2003 G4 PowerBook when I was in college. I still use it... 18 years later.

I'm loving the cancer hardware videos

The fact that you kept saying "coorel" had me laughing the whole video haha. I would LOVE to see a noctua version of that, genuinely curious if it would do much. To my knowledge most laptop coolers perform about like this one

Yep we had the same issue our house with an ASUS gaming laptop The thing was like a furnace, The laptop cooler we had made very little difference, we even tried to stick a couple of freezer packets underneath the laptop while gaming.

I bought a Cooler master one with 1 big fan and USB pass through for my laptop. It actually works great. Dropped my temps by about 10-15c

I used to use a make shift Noctua one... a couple of their 5v fans can be bought with USB cables and that combined with a simple raising stand work wonders for my Thic boy Dell gaming laptop from a few years back.

There's another laptop cooler that i think is kinda badass and effective on laptops , the model name is the "IETS-GT300" not sure if either amazon or alibaba has it 🤔 whats different about the cooler i mentioned is it has a rubber ring around it , basically sealing off air leaks around the laptop and forcing air to go up in those tiny laptop vent cutouts.

I built my own laptop cooling pad with an perforated laptop holder, four 80mm Enermax fans, and a cheap four channel Kingwin fan controller. It actually made a difference cooling my old Clevo P750TM1-G with a 8700K and a 1070.

would love to see more videos on this type of stuff.

Dawid please try this: Batch cook lots of lovely food, freeze in rectangular containers. Get two pieces of wood to put your laptop on, leaving a gap underneath for a folded tea-towel with frozen food container under laptop. I've found this can defrost the food much more quickly than just leaving it on the kitchen counter, so there is an effect where cool air is drawn up into the laptop but I wonder if it would have any effect on gaming temps? I don't game or have windows so cannot test this myself. Thank you.

As far as i know, there are two kinds of laptop coolers, if you can make a video on laptop cooling for budget gaming laptops like rtx 2060 or 3060, as these laptops usually don't have dedicated vents and cooling systems like those big 17 inch top end systems do. If you can do that, it will be helpful to a lot of people

I honestly think putting a waterblock in that stand makes more of a difference for leading away heat. Otherwise maybe with the bottom of the laptop open to allow more direct airflow on the components inside the laptop.

That's 2 more vids. 1 ~ Dawid Builds Tech Cooler Stuff, then, 2 ~ Dawid Sets His DIY Tech Pile on fire. Go go Gadget Dawid!

@Dawid , do as I did , take a dreamel (i used pliers ) to cut the mesh on the to, it improve drastically the air floww

I would love to see a video with a high-performance cooling stand from a reputable brand, your home-made Noctua cooler, and this cheap one, and have a head-to-head comparison

I'd like to see a collab with you and major hardware. Hes incredibly good at DIY stuff and he comes up with some ....unique...ideas and the project you're thinking of would be so good.

The way you roll with those descriptions makes me laugh so hard

Definitely have a go at making one Dawid, better quality fans and some RGB bling for that added WOW factor :)

Oh, been waiting for this one

i have a similar laptop stand, the cooling is basically a placebo but it does make my setup look a little better

I saw a Linus video where they added heat pads in between part of the cooler and the metal case backing to a mac laptop. Performance was better but the case got to a pretty high temperature - would probably be pretty cool for a situation like that.

I found a PS4 Pro top cover on Ebay. So I drilled holes and mounted a 140mm fan on top of the cover (not wrecking my top cover) and used a USB to 3 pin fan adaptor. It keeps my PS4 Pro really cool. I bet you could improve a laptops cooling.

I had always wondered if those laptop coolers actually worked but never enough to spend my own money on one. Thanks for being out test dummy! And I mean that in the nicest way Dawid!

Linus ones did a mod with a MacBook Air where he added thermal pads so the cooler inside and the bottom side would connect, I think a pad like this would benefit that winds most laptops have the underside insolated to make it lap usable

Laptop cooler performance is entirely depend on the ventilation you have on the back of the laptop. If the fans is aligned with the laptop ventilation, it does help a lot..

100% wanna see you build the cooler

I own one of this thing and the biggest problem is that it blows tons of dust in the laptop cooling system. I stopped using mine because I had to replace 2 times my laptop cooling system !

I had a similar cooler only I took the fans off and put a 220mm jumbo fan under it, then channeled the air so it wouldn't escape around the edges too much. This lost most of the noise and cooled better than the original fans.

what bugs me is the fan direction , i recently purchased one of these laptop coolers but the fans were facing so the cold air would blow into the laptops blower fans instead of the one in the video. I also im interested in modding the laptop pad and putting a few noctua 140mm inside.

Yes do a DIY laptop cooler! I was looking into that with usb to 3 pin fan! I just bought a cooler for my son yesterday and also got one with the higher elevation settings as thought would cool better... No RGB though so lose frames on that!

worked ok for my kids laptop (at least one thats similar) hot here though and the default cooling was struggling during the summer. it did stop the overheating lockups while gaming.

Yea make one and this time have the cooler setting in ice. Ha!! Dawid needs a t-shirt with "I'm Overclocked" on it.

been looking forward to this.

Yeah my gaming laptop rivals a rocket engine both in noise and heat output. I use throttle stop to lower the cpu frequency, which helps a little.

definetly make the Dawid version of it👌👌

I used to have a laptop stand from Logitech that had several fans, speakers, and lighting settings, and it required AC input.

I have one similar to this that I mainly use when I want to have it in my lap and turn the fans on medium to move around some air. My legs never get hot so thats nice. Yes to the Frankenstein 8 coorel noctua hyperthreaded monster.

Dawid,at first I liked your vids they were entertaining but for the past 3 months you really stepped up your game to the point I actually got bored of a LTT vid and saw your new vid and got really excited.Keep up the good work man you have become a legend.

Should use those fans they use in rack-mounted servers for your laptop chiller. You’ll have some very thinly sliced flies and permanent hearing damage.

i used to duct tape 2 pc case fans to the bottom of my laptop before and connect them to some old e-waste tier power supply(very safe i know), used to be like 7-8 C cooler, would definitely love to see a DIY Noctua version

Already said it on the video where you found those but I bought a similar product for my Acer laptop because it kept overheating and thus throttling the CPU and the laptop stand solved the problem for me. Mine did not have such a restrictive backplate around the fans though. It is still very plasticy and cheap though. It was the Klem one that you saw on Amazon btw.

Gotta say i loved seeing this awesome new "Coorel" review! Coorels from all around will be jealous! sidenote tho have you ever tried using gesture mode on ur phone? ive used it since i got the s21 ultra and i love it!

I have an even more basic, but similar thing, and I really like it for use on my actual lap. Means I can game on the couch without either me or my laptop becoming inappropriately hot and sweaty

You got a like because I want MORE videos like this one! haha just kidding you're great. love your content, keep up the great work!

I use a small piece of wire shelving to put my laptop on. Gives a bit of a tilt and fits in my laptop bag with the laptop.