Great write up. I was curious about this upgrade and log results. Thank you!
@accelerated_motion3 жыл бұрын
Good info! Your videos are concise, no non-sense. Which I love. So much crap on youtube these days. Keep it up man!
@BuffaloSoldierH3 жыл бұрын
Another great video, thanks man hope you keep getting ups for the content
@idhammunirmohd10293 жыл бұрын
Insightful vid. Thank you for sharing your journey. From a b48 330i 😊
@vasutaak79073 жыл бұрын
Dope content bro! Looking forward to more videos.
@alanw.45112 жыл бұрын
Fantastic video!!! Well done!!!
@jpsr20det3 жыл бұрын
Thank you for the vid , good insight
@mateo...3 жыл бұрын
just what I was looking for! Thank you
@kern417
3 жыл бұрын
Glad to help
@4385super3 жыл бұрын
Great video extremely informative !!
@kern417
3 жыл бұрын
Glad to help
@tonymallia19403 жыл бұрын
Great Info.Thanks
@TheSpeedAddiction3 жыл бұрын
Very detailed and informative. Thank you!
@renatinhocunharc3 жыл бұрын
thanks sharing your expirece
@RA-zk4gg8 ай бұрын
Ohhhh shit!!! Engine cover off made a significant difference
@mateo...3 жыл бұрын
Brilliant
@rigaskyriakopoulos7038 Жыл бұрын
Does the same upgrade go for the 17 330i xdrive, f30, b48 engine? I have only a cold air intake upgrade on it.
@NguyenFamandChavez Жыл бұрын
what you think a spray near the throttle body. My charge pipe came with a plug for Meth, but instead of meth add water. Just a little amount
@nasrullah36983 ай бұрын
Hey bro, love the vid. Just wanted to ask are chargepipes and intaje pipe worthwhile upgrades for the b48/b58?
@M240_2 жыл бұрын
If I hit the bottom of my car and I bent the bottom of my heat exchanger would it be bad to not replace it?
@dwaynebolan25833 жыл бұрын
Great video. Please make a video for what to look out for when buying a used F30/F32.
@jpgarage1010
2 жыл бұрын
Just buy one that has a stock chrome grille and you should be fine 🤣🤣
@kern417
2 жыл бұрын
I still have mine to revert to stock if I sell 😈
@dwaynebolan2583
2 жыл бұрын
@@jpgarage1010 😂
@yoiinkHD3 жыл бұрын
Removing engine covers helps your car?
@peijunli16452 жыл бұрын
Hi mate, really love the comparison, so much detailed information. just a quick question, I've got a 430i, a b58 with 2 less cylinders. I'm currently on bm3 stage 1 with high-flow cat but i can see my turbo is pushing around 18-19psi. Do you think that the stock heat exchanger can manage that turbo boost?
@kern417
2 жыл бұрын
Yes
@markzl16083 жыл бұрын
Subbed
@kern417
3 жыл бұрын
Appreciate the support
@xantonin3 жыл бұрын
Thanks for the information - what happened to your Dinan intake in the beginning though? Looks like you went back to stock?
@kern417
3 жыл бұрын
There were no noticeable performance gains so I sold it
@richardzarate52502 жыл бұрын
Hey Kevin what do you think about running higher water percentage for better cooling? 60-40 or 70-30 distilled water to coolant concentrate. Can also add the water wetter, since water cools better wouldn't that help our IATs?
@kern417
2 жыл бұрын
7:56
@WinningEverything53 жыл бұрын
I noticed you took off your Dinan intake, any reason for this? Was the car more efficient with the stock box?
@kern417
3 жыл бұрын
It performed the same as stock. So I sold it and used the money for other modifications
@the_batmobile0.4 Жыл бұрын
Does the rock guard limit flow? I recently installed a csf heat exchanger with the rock guard, and honestly there's no difference in IAT'S in city driving and highway driving, didn't do a wot pull yet tho. Definitely will do one tomorrow. And report pack
@kern417
Жыл бұрын
Not really
@scottkinney36842 жыл бұрын
What happens when the intercooler let’s go in the manifold. Hydro lock?
@kern417
2 жыл бұрын
If it got bad enough
@T0thy9 ай бұрын
My stock heat exchanger is leaking due to a rock. Would this be worth upgrading?
@kern417
9 ай бұрын
yes
@hummzs37403 жыл бұрын
Is this the same kind of install for b48?
@kern417
3 жыл бұрын
I'm not sure but it's probably similar
@carlsagan30659 ай бұрын
Does bm3 performance cooling mode help in combo?
@kern417
9 ай бұрын
it can but it's not really recommended for daily driving
@badass1g3 жыл бұрын
Bang for buck, would you think a meth injection kit would be a better mod then this for more performance gained?
@kern417
3 жыл бұрын
Yes
@rmalanis13Ай бұрын
Those are called microchannels. Tube and fin is old school. Way more reliable but less efficient. Microchannel is way more efficient but easier to puncture and leak prone
@badass1g2 жыл бұрын
No wonder my car feels slower in the summer months. I didn’t know it auto detuned like that wow.
@user-rk7cw2bf9u
11 ай бұрын
That and combine with natural heat soak where you're making less horsepower per pound of boost they just are slower when it's hot out
@Starscream889611 ай бұрын
time to remove my engine cover and invest in some water wetter, haha never knew those would help.
@asunstate10743 жыл бұрын
Would this help the reliability if the car was stock with MPPSK?
@kern417
3 жыл бұрын
The MPPSK tune does not push the engine enough to warrant this setup. The stock heat exchanger can keep temps under control.
@TheDarkForce187
3 жыл бұрын
@@kern417 same question but with Stage 1 instead of MPPSK, is the stock heat exchanger good enough for Stage 1 91 octane?
@kern417
3 жыл бұрын
@@TheDarkForce187 yes absolutely
@universalg_
3 жыл бұрын
@@kern417 how about bm3 stage 2 (AGG) Ethanol - 30%?
@kern417
3 жыл бұрын
I didn't see excessive IATs until i added a hpfp. Run logs to see if your IATs are spiking and staying high while driving. That'll be the best indicator.
@NguyenFamandChavez Жыл бұрын
My intake temp reach 160F today after i upgrade my intake to an aluminum one
@kern417
Жыл бұрын
Which intake manifold? RK?
@NguyenFamandChavez
Жыл бұрын
@@kern417 charge pipe I means. Got a crank case ventilation leakage check engine light. I need to check to see if I have a lose hose...
@christianramos17344 ай бұрын
3 years later and no heat exchanger for a b58 740i🥲
Пікірлер: 66
Great write up. I was curious about this upgrade and log results. Thank you!
Good info! Your videos are concise, no non-sense. Which I love. So much crap on youtube these days. Keep it up man!
Another great video, thanks man hope you keep getting ups for the content
Insightful vid. Thank you for sharing your journey. From a b48 330i 😊
Dope content bro! Looking forward to more videos.
Fantastic video!!! Well done!!!
Thank you for the vid , good insight
just what I was looking for! Thank you
@kern417
3 жыл бұрын
Glad to help
Great video extremely informative !!
@kern417
3 жыл бұрын
Glad to help
Great Info.Thanks
Very detailed and informative. Thank you!
thanks sharing your expirece
Ohhhh shit!!! Engine cover off made a significant difference
Brilliant
Does the same upgrade go for the 17 330i xdrive, f30, b48 engine? I have only a cold air intake upgrade on it.
what you think a spray near the throttle body. My charge pipe came with a plug for Meth, but instead of meth add water. Just a little amount
Hey bro, love the vid. Just wanted to ask are chargepipes and intaje pipe worthwhile upgrades for the b48/b58?
If I hit the bottom of my car and I bent the bottom of my heat exchanger would it be bad to not replace it?
Great video. Please make a video for what to look out for when buying a used F30/F32.
@jpgarage1010
2 жыл бұрын
Just buy one that has a stock chrome grille and you should be fine 🤣🤣
@kern417
2 жыл бұрын
I still have mine to revert to stock if I sell 😈
@dwaynebolan2583
2 жыл бұрын
@@jpgarage1010 😂
Removing engine covers helps your car?
Hi mate, really love the comparison, so much detailed information. just a quick question, I've got a 430i, a b58 with 2 less cylinders. I'm currently on bm3 stage 1 with high-flow cat but i can see my turbo is pushing around 18-19psi. Do you think that the stock heat exchanger can manage that turbo boost?
@kern417
2 жыл бұрын
Yes
Subbed
@kern417
3 жыл бұрын
Appreciate the support
Thanks for the information - what happened to your Dinan intake in the beginning though? Looks like you went back to stock?
@kern417
3 жыл бұрын
There were no noticeable performance gains so I sold it
Hey Kevin what do you think about running higher water percentage for better cooling? 60-40 or 70-30 distilled water to coolant concentrate. Can also add the water wetter, since water cools better wouldn't that help our IATs?
@kern417
2 жыл бұрын
7:56
I noticed you took off your Dinan intake, any reason for this? Was the car more efficient with the stock box?
@kern417
3 жыл бұрын
It performed the same as stock. So I sold it and used the money for other modifications
Does the rock guard limit flow? I recently installed a csf heat exchanger with the rock guard, and honestly there's no difference in IAT'S in city driving and highway driving, didn't do a wot pull yet tho. Definitely will do one tomorrow. And report pack
@kern417
Жыл бұрын
Not really
What happens when the intercooler let’s go in the manifold. Hydro lock?
@kern417
2 жыл бұрын
If it got bad enough
My stock heat exchanger is leaking due to a rock. Would this be worth upgrading?
@kern417
9 ай бұрын
yes
Is this the same kind of install for b48?
@kern417
3 жыл бұрын
I'm not sure but it's probably similar
Does bm3 performance cooling mode help in combo?
@kern417
9 ай бұрын
it can but it's not really recommended for daily driving
Bang for buck, would you think a meth injection kit would be a better mod then this for more performance gained?
@kern417
3 жыл бұрын
Yes
Those are called microchannels. Tube and fin is old school. Way more reliable but less efficient. Microchannel is way more efficient but easier to puncture and leak prone
No wonder my car feels slower in the summer months. I didn’t know it auto detuned like that wow.
@user-rk7cw2bf9u
11 ай бұрын
That and combine with natural heat soak where you're making less horsepower per pound of boost they just are slower when it's hot out
time to remove my engine cover and invest in some water wetter, haha never knew those would help.
Would this help the reliability if the car was stock with MPPSK?
@kern417
3 жыл бұрын
The MPPSK tune does not push the engine enough to warrant this setup. The stock heat exchanger can keep temps under control.
@TheDarkForce187
3 жыл бұрын
@@kern417 same question but with Stage 1 instead of MPPSK, is the stock heat exchanger good enough for Stage 1 91 octane?
@kern417
3 жыл бұрын
@@TheDarkForce187 yes absolutely
@universalg_
3 жыл бұрын
@@kern417 how about bm3 stage 2 (AGG) Ethanol - 30%?
@kern417
3 жыл бұрын
I didn't see excessive IATs until i added a hpfp. Run logs to see if your IATs are spiking and staying high while driving. That'll be the best indicator.
My intake temp reach 160F today after i upgrade my intake to an aluminum one
@kern417
Жыл бұрын
Which intake manifold? RK?
@NguyenFamandChavez
Жыл бұрын
@@kern417 charge pipe I means. Got a crank case ventilation leakage check engine light. I need to check to see if I have a lose hose...
3 years later and no heat exchanger for a b58 740i🥲