Dodge Van $100 Paint Job using battery powered paint sprayer
Автокөліктер мен көлік құралдары
POV prep and paint job of my 1994 Dodge Ram Van B250...
Needed a fresh look on the cheap.
No primer, just prep and sprayed over light surface rust.
Using 1 Gallon Kit of Blue Gray Metallic Single stage high gloss enamel ($105 value)
and CACOOP cordless paint sprayer
Not shown all that much was removing the old crusty pin stripes, which were really tough to remove. I used a razor blade and then goof off spray to remove the sticky adhesives before sanding.
Had to paint in 4 separate parts because of battery life of the paint sprayer. (Spraying of the rear doors and hood not shown)
Driver side, Passenger side, and Roof are recorded.
Paint used:
www.ebay.com/itm/264017939250...
Cordless Sprayer:
www.amazon.com/CACOOP-cordles...
Пікірлер: 56
Impressive! Ingenuity meets hard work
@cowboywonton
Жыл бұрын
You r too kind!
I say it's pretty damn good,all things considered! Heck I would have just rolled the roof in gloss black, who's gonna see it? And yes, I would have primered most of that before I started spraying, but in the end it didn't matter.I liked your idea of a bunch of thin coats as opposed to 2 or 3 thick ones. It made for a better job IMHO. I think it's a win!
@cowboywonton
Жыл бұрын
Appreciate writing down your thoughts and kind words! I originally wanted to roll the whole van, but ended up giving electric powered sprayers a shot. For less than $200 paint job for a van, I was not disappointed-- Maaco wanted to charge me $3-4k+! At the end of the day, it's a camper van that'll be put to work in the harsh elements. Concerning about my paint while driving through tree branches is the least of my worries
Great job dude
Nice job. You saved yourself thousands
Looks good
Just done the same to my van, Good Job Howard.
@cowboywonton
9 ай бұрын
Awesome, thnx. How did yours turn out
good job
@cowboywonton
Жыл бұрын
thanks brother
new subscriber plastic dip
better than using 6 spray cans
Considering that orange peels galore, to have primed it before would not have made a lot of a difference. I've heard that with them electric sprayers, single stage and thick materials alike does a better job, but still orange peel seems to be a constant. I think that with corded unity with the compressor separated and with a nozzle of 1.0mm or less, the results would have been better, also wet sanding it with 2000 grit and higher would not have hurt it.
@KingKatRider
9 күн бұрын
Umm of course but that wasn't his point. He just showed what he could get away with for a hundo.
Honestly it’s good ,,, if you lightly wet sand it then polish or clear coat it it’d be pretty close to pro ,,, only thing is to be perfect would be filling in the body and peeping it uniform and evenly,,, but like I said ,,, it’s good you can always go back and refine it over time 👍🏾
Very nice. Would have been great if you actually spoke and said what you was doing.
Nice job. I’m no expert but it’s giving me motivation to tackle a project daily I purchased that’s been sitting for like 5 months with clear coat peeling. I was told these guns are not recommended by so many and the paint would be too thick. Now I’m gonna purchase one any way. What grit sand paper did you use prior to using the gun
@cowboywonton
7 ай бұрын
Glad to hear! I would highly suggest you pick an electric sprayer that's corded. Also I think I used 320 grit to prep the surface
#vanpimping at it's finest!
Looking nice. Did you get much overspray?
@cowboywonton
Жыл бұрын
Not very much! I made sure I did it in order (painted the areas first where it will cause more overspray around the perimeter) It’s also a very large square-ish van too.
Whats nozzle size you use?
@cowboywonton
Жыл бұрын
I think i used the medium size first. and switched it out from there depending on the splatter
Which nozzle do you have used?
@cowboywonton
7 ай бұрын
I think the middle sized
What kind of paint did you use?
@cowboywonton
3 ай бұрын
Single stage enamel
How much paint did you use?
@cowboywonton
Жыл бұрын
1 gallon
What brand is this gun spray please
@cowboywonton
7 ай бұрын
Cacoop on Amazon
How much you charge to do the jams lol.
@cowboywonton
2 жыл бұрын
Haha bro i did the jams with a gloss smoke gray rustoleum spray
@cowboywonton
2 жыл бұрын
@odeecxmpo single stage enamel paint , hardener, and reducer
@cowboywonton
2 жыл бұрын
@odeecxmpo if you click on the eBay link in my description, you’ll see the diff colors that company offers
Did you add clear coat ?
@cowboywonton
Жыл бұрын
no clear
@MugiwaraWeb3
Жыл бұрын
@@cowboywonton how’s it holding up
@cowboywonton
11 ай бұрын
@@MugiwaraWeb3 holding up great after 2 years. Haven’t seen any peeling or anything
I know this is a cheap paint job, but aren’t you supposed to primer the spots that you sanded to metal before painting? Otherwise, looks good.
@cowboywonton
2 жыл бұрын
Yep, it is in good practice to primer over metal surfaces. But I'm using enamel paint and it isn't necessary.
@Leanne-ww2rv
2 жыл бұрын
@@cowboywonton thanks for the info. I didn’t know that about enamel paint.
Sidewinder is upside down
would of primed it first get bett paint coverage
Why no primer???????🙃🙃🙃????
@cowboywonton
Жыл бұрын
First time trying it out to see how long it can last. And extra $ i didn't want to spend for this job.
Would of prime it first so use less paint
I would have painted the roof first, with a paint brush, then sprayed the sides
@cowboywonton
Жыл бұрын
That’s the right move
@combatvet2964
3 ай бұрын
What do you mean a brush. You dope. Paint the roof yes with the gun first
@combatvet2964
3 ай бұрын
Rape van
Isnt better using a compressor? That orange peeling looks ugly..
@cowboywonton
Жыл бұрын
You’re watching the wrong video if you expect it to be a professional job. This is a $100 paint job using a cheap battery powered paint sprayer
@Sputz3
Жыл бұрын
ITS A ONE HUNDRED DOLLAR PAINT JOB. SMH
@stephenbeck5993
6 ай бұрын
What is wrong with orange peel? We are just accustomed to seeing glass-smooth finish on cars. I suspect that the painted walls in your house have orange peel. Does that look ugly to you?