Dodge M37 Locking Ring / Safety Ring disassembly using a new tool to break the bead.
Автокөліктер мен көлік құралдары
900-16 wheel disassembly, bead breaking, split rim removal on a Dodge M37 wheel. Please excuse all the sniffles, got a bad sinus cold when filming, work has to get done.
Пікірлер: 25
IN VIETNAM, we did the tire breakdown and tube repair using a pick Madoc. When you fpatched the tube and went to install the tire on the rim, you place the split rim facing the ground when airing it up. 1/2 hr
Just started on my dad's M37. glad I stumbled across this video.
#1, more soap. Thats the cheap part. #2 when you get the lock to split drive it in the direction of the lock. You want to separate it from the rim. By driving it with a hammer you expand it off the lock ridge. Make sure you clean all the corosion off of it prior to remounting. And use a cage or safty chain.
are you going to sand blast those rims and paint them now is time to do it also when ready to reassy. used corn starch inside each tire to ease the friction tween tire and tube keeps tubes from having a fold in them------ this info is for new guys learning the ropes
Great demo. I'm going to be trying my first tire change on my FFPW and just ordered one of these.
Mike, you are a trooper, sounds like the sinuses are killing you! I do know some old Vietnamese "papasans" that are chuckling right now! We alwaysused WD40 as the penetrant/lubricant. Beadblast and powdercoat those rims and they will be better than new.
Dave and I have both had tires where the bead stuck so tight that some of it ripped off the tire and stayed with the rim.
did that type of job back in the 70's. not fun. all we had was a tire sledge and big pry bars. didnt use cage or chains when inflating. lucky to still have my head.
Making it look easy.
Murphy's Oil Soap is great tire lube
I own a 1950 Power Wagon, I’m sure I’ll have to do this sometime
I just did 2, on there for 50 years. The only way I found to work was cutting the tires.
So far I have only changed one NDT on my 53 M37. I didn't have to break the bead...?? The ring easily separated from the tire, ( although I did fight separating the ring from the rim). And the tire was easily separated from the rim. Do you think there might be something wrong with my rim?
What's the part number of the tool with the hook on it? Harbor freight says they don't have them...
Tire needs to be pushed down more
do not forget to put corn starch in tire be fore add ing the tube keep tube from get a fold starch lets tube slide around tire natural position
When you first started to remove the lock ring, never let go of your tire bar that thing could have flung and popped you square in the face.
Are those Steel-Toed Crocs?
Have you a link to bead breaker ?
@WatsonsWagons
3 жыл бұрын
They have them on Amazon
@joedemp27
3 жыл бұрын
@@WatsonsWagons cheers thanks
What was in the spray bottle?
@joedemp27
3 жыл бұрын
Soapy water
@WatsonsWagons
3 жыл бұрын
Dish detergent and water, protect the tire from the tool keeping the area slick
That's a locking ring, split ring not split rim.