I loved the, "either a deer or a person, I don't remember🤷‍♂️"

@gustheboy5293

Жыл бұрын

For real 😂

@uberchipmonk2568

Жыл бұрын

We definitely need the backstory on that one

@faithfulknightfonvratha9871

Жыл бұрын

Right I started cracking up big time when he said that 😂😂😂

@ccoder4953

Жыл бұрын

Me too. Is hitting people such a regular occurrence he just forgot about it or where he hit them?

@UnfitToLive

Жыл бұрын

Ugh, preach. So many deer, so many people. Always in the way. 🙄

Man, the comedic timing of that cricket was impeccable

I think you're supposed to put isopropyl alcohol in the spray bottle to dissolve the hot glue and have it come off more easily

@michaelross1544

Жыл бұрын

Alcohol is correct and when you use the pullers on a small dent you should choose an attachment that is smaller and fit in the low point of the dent.

@bobt3083

Жыл бұрын

it comes off very easily with he alcohol. I personally use 99% isopropyl. It will even come off the tab you implied was probably only "one use"

@BritishEngineer

Жыл бұрын

The isopropyl doesn’t dissolve it, it just acts as a suppression to the stickiness.

@laneshearer1854

Жыл бұрын

90% or higher works best 70% doesn't work well

@Fuck_YT

Жыл бұрын

​@@BritishEngineer so should i keep a bottle with me at all time in case i get in a sticky situation

As a body mechanic I will give you a little advice from experience, hoods are extremely hard to repair and normally are just replaced. The best test you could have done is on the fenders/quarter panels. Also the hot clue isn’t meant for sheet metal it’s made for plastic body panels

@Tommo.

Жыл бұрын

Totally agree with what you're saying, just curious what's a fully qualified smash repairers pay over in the US? Assuming of course from the usage of the word "hoods"

@keeganhoward5850

Жыл бұрын

@@Tommo. it definitely has a wide range based on quality and experience. The shop I worked at we fixed semi trucks and the shop charged $130 an hour with the technicians making between $20-$35 an hour

@Mj-cj8wd

Жыл бұрын

I worked at a crappy body shop and w never pulled a dent it was bondo or new pannel

@andyelifritz3550

Жыл бұрын

It's a pdr kit. We use them all the time at work but you can use them on metal. Also yes that's what the sprays for. But the ball point dent he did he would need hammer and dolley for

@corey6348

Жыл бұрын

That’s what I was taught both way if u can fix it do it if not then replace it

The dent on the side of the hood is definitely a secondary hit from when the "deer" bounced up and over the hood. I can't really speak to pulling out dents though. After an "accident" I usually burn the car or drive it into a quarry. Edit: I mean, that's what my friend does.

When learning how to use at item, it's always best to watch this channel first. Learning what NOT to do first, will make you much more successful later!

@brianmsith7979

Жыл бұрын

I watch him cause it's funny watching him do this shit and try and learn it

Tyler stomping holes in his car. This is the kind of quality content I get online for.

@mCblue79

Жыл бұрын

😂😂😂

@WizenTestergamer

11 ай бұрын

Nobody notice his feet while doing this

I like the off camera assistant giving his/her cricket opinion on what you're doing Tyler.

@TwoMenInACloset

Жыл бұрын

@@SirSimpleSloth you'll be alright poor thing

@whoop8034

Жыл бұрын

@@SirSimpleSloth you hate women?

@fizzy4050

Жыл бұрын

Not the pronouns

@xion1629

Жыл бұрын

It would be "his" as female crickets don't make noise 🤙

The cricket in his garage made me laugh every time lol

@FayeBush381

Жыл бұрын

Me too.

@dennisgibsonii6316

Жыл бұрын

It was always at the best time to. Right when he went quiet chirp chirp

Already know this is gonna be a banger. Wonder how much tool missuse this will entail lol

@rodneythundercock

Жыл бұрын

Yes

@justmytw0cents

Жыл бұрын

Yes

@Carl_Jr

Жыл бұрын

All of it

From what I’ve learned with dent removal is you work around the dent working your way into the middle. This will relieve the tension of the dent and sometimes just doing the outer edges will the center of the dent. Dents with creases are the most time consuming because the crease has to be worked on first before anything will come out. Always good to see honest testing on things readily available items to the public.

“My expectations are lowered significantly after I saw how small this thing is, so let’s see if it works.” Boy, if I had a nickel for every time I heard that…

@olivercillian

Жыл бұрын

That's what she said

@darkallyrecordings4931

Жыл бұрын

@@olivercillian Thats the whole point of the joke. Lol.

@onestopfabshop3224

28 күн бұрын

Ha!

Just a heads up the bottle you put denatured alcohol in it. That will get the glue off the tabs (the super big one you had) and off the car. The types of glue are for the heat where your at. The black is best to use in winter and clear/yellow for the hot. They also make a red one as well. Unfortunately those tools won’t work for your car you’d need a actual tool bad and go under the hood with a torch i would suggest. And I’d use a pdr hammer and white tool to knock down the high spots. But anyways I do this for a living those kits unfortunately won’t work for you good because of the metal it’s a old car and your hood will just oil can. (Which is what kept happening when you jumped in it). Anyways those tools definitely work just not in those dents.

The cricket during the hot glue one is my thoughts exactly

The spring is to prevent the puller from shooting back at your finger from all the pressure... exactly as you encountered lol.

Also, as a side note: You could use a heat gun to warm that glue some before cleaning it up. Maybe with it a little soft it will peel off better

@ruffianturnt2550

Жыл бұрын

The little bottle is for alcohol. Breaks down the adhesive.

@nathanaelhiebert4590

Жыл бұрын

I have found that heating it up makes it worse. Alcohol is really the best way to remove it.

@oilybrakes

Жыл бұрын

@@ruffianturnt2550 Try using gasoline instead. Gasoline just flows between the hotglue and whtever it is stuck to and unglues the entire patch of glue right away. Its kinda neat, but also shows how useless hot glue can be for some things.

The level of precision and preparation and execution is superior!!!!

Small Impact dents, like from a hammer, stretch the metal so it is never going to return ... Dent pullers work best on pushed-in surfaces with any creases to the dent.

0:52 casually saying he might've killed a person

Idk how you're not at 1M subs yet, but you're well on your way. Been watching since early on, you deserve it bud!

@ricardozazueta5054

Жыл бұрын

That’s what I’ve thought to myself

Ive been a body man for 23 years and everything you used today was made for paintless dent repair (PDR). Their for soft small dents like hail damage. Your dents you made require different set of tools.

@DNAProductions_

Жыл бұрын

Exactly like keco sets.

@ohioknifelover

Жыл бұрын

This video is a great representation of what a regular person would do about the dents in their car without any experience!

@Stigstigster

Жыл бұрын

@@ohioknifelover This regular person with no dent removal experience just ignores the dents on my car.

@ohioknifelover

Жыл бұрын

@@Stigstigster Yeah me too lol

@scottsuhre2514

10 ай бұрын

Yep! That set of tools would be wrenches. lol Replace that thing.

I sooo thought Tyler added crickets sounds to his video dealing with the 2nd method, the gluing lmao 🤣

“Idk what this spring is for” “Ouch, that kind of hurt” Spring keeps it from flying into you after it pops free

the colours are for different pull strengths, the bottle is used for de gluing when put some sort of acetone

@gerrymichaud3851

Жыл бұрын

Not acetone. Acetone is nail polish remover, so it'll eat through the clear coat and paint.

@jeffhousen8968

Жыл бұрын

Isopropyl alcohol, the chemistry is quite long, the TLDR is repolymerize the glue into something that doesn't stick

i definitely want to see rust remover or scratch reepair for the car. flat tire repair kits also!

back in the 80s I trained for a year in dent pulling. but we used actual screws though the sheet metal and a slide hammer. Zero hot glue in a body shop back in the olden days. I bet the ones that tack weld a little tab to pull on work even better.

I think the bottle is for rubbing alcohol too get the glue off but how is everyone supposed to know that 😂

As a professional repair tech I can tell you that spray bottle is for isopropyl alcohol. Dissolves the hot glue to make it super easy to get off

Haha! The glue one was comical! You must've had to use something to take the glue off easier, because the way you were going about it even IF you fixed the dent, you just scratched the crap outta your paint 🤣

If Tyler doesn’t do something about his beard I think the garden gnomes are going to sue him for infringing on their likeness rights.

@OreoHT

Жыл бұрын

I'd like to see them try! 😈

@serpent213

Жыл бұрын

Yeah, they call it “cultural appropriation” in the end times… 😂

Heat gun helps remove glue. Just melt the glue to the point it's soft and it comes right off with the scraper. Dent pullers like these aren't meant for creased dents like the last one you're trying to pull. You're better off using a mallet and block from underneath and trying to bang it out.

Dent pullets aren't really for small dents. They're for popping back out large dents. For small dents, banging them from the inside, and covering them with Bondo is most effective. In general, one tries to get a large dent as smooth as can be, and then you just Bondo over the creases, if you really want it looking good.

@savage6394

Жыл бұрын

There is a huge industry around PDR (paintless dent repair). No Bondo and no Paint required. Hence the name.

@Carlos-be2kc

Жыл бұрын

@@savage6394 when and doubt bondo it out

@RabidWolf1966

Жыл бұрын

I thought it was the opposite...pullers are for small dents, not big ones...

Slide hammer is actually EXTREMELY effective!!! Because of your lack of ever wanting to read instructions... Dent pulling results will vary greatly depending on SURFACE PREP hence the "Spray Bottle" that these kits come with! (cheap Amazon kits) do not even include everything needed to do this properly. 90% kit.

The little spray bottle is a complementary item to fill with glass cleaner. After you're done pulling the dents from your hood from hitting a person (or deer) you can clean the blood off your windshield and drive away.

@Stigstigster

Жыл бұрын

I leave the blood and dents on my car as a warning to others.

Love the videos man. Always fun to watch. The spray bottle is for alcohol to help remove the glue. The Different color glues melt at different Temps and bond harder to the car (in my experience). As someone who uses the slide hammer method every day in a factory setting, along with curved rods from the inside. You have to start from the outside of the dent and work you way in. Your car body might be too thick though for the glue and those dents might be too big. When I have to pull a dent out of a car too, never light tap the hammer unless it's close. Always use one sure smack. Alot of factors play into the whole thing though, mat thickness, the curvature of the hood and the size of the dent and puller all play a part.

The dent pullers couldn't work because you filled the whole dent with glue. You would need to use a smaller puller and only glue it to the lowest point in the dent. I think the ones you used were meant for larger dents.

Bro got eyebags from how much he grinding out these videos. Keep it up dude!

The squirt bottle on the second kit is for isopropyl alcohol. Isopropyl alcohol releases hot glue and will not damage paint.

could always try the welded stud dent puller.

I always buy something on Amazon, and when it arrives I’m like … no way I got the right item. Yup, I did, it’s just like 3x smaller than I thought.

@evanrossman2804

Жыл бұрын

said every woman from the bar. lol

WOW!!! The fact that he even says it is straight forward and simple amazes me!!!

17:07... My guess for the spray bottle is that is probably meant to have something along the lines of like Goo Gone or other cleaners that break down most types of glue in it so you can get the hot glue to break down enough to be able to get it off without having to scrape quite so hard.

I think everytime Tyler has the car in the garage he ages a decade.

I have loved everything I’ve seen on this channel

an old method is to use a blow torch and gluesticks. Attach multiple to the dent(s) and then pull with all your might. Then use some kind of solvent to get the gluesticks off.

I did love the crack repair one, as I love all your videos. I recommend you to all my friends.❤️

That cricket has has enough of your shenanigans😂 love the video

Oh that orange mini dent remover is so cute

For small hail size dents try this: Heat the area very hit with a heat gun, too hot to touch, but don't melt the paint! Then take a can of keyboard duster, hold it upside down, and spray the dent to superchill it and the dent should pop out. It worked on my miata hood for hail damage.

I live for these videos

Turns out I hate the sound of hot glue guns. Thank you for helping me come to this realization.

@TheBookOwl

Жыл бұрын

It’s the same sound my knees make when I do squats.

The slide hammer method is for PDR on hail dents ! It’s supposed to be a one time pop off the metal .

Even pulling the dent properly with a slide hammer or hammer and block, you still need to use filler to get a perfect repair.

From what I remember of autobody class, Dent repair on panels and hoods, done right, requires heat. Granted, you can do dent repair on painted panels but typically you want to use a deadblow mallet and a tool I'm forgetting the name of underneath/ on top of the dent. You hammer in circles around the dent, and the vibrations-assumuming you heated the metal correctly-will slowly pull the dent in or push it far out, and the ur becomes a balancing act. And also, you do need to quench the heated spot lol. I'm sure it sounds very barbaric, but it's surprisingly fun.

I swear lost your channel for a good minute and been searching👀 on God I got excited you cool asf bro keep the vids up

@text5425

Жыл бұрын

Thanks for the feedback Expect more videos soon Send a direct message I have something special for you🎁🎁

Hey Tyler. I used your code for the air up. My nana drinks a ton of flavored water so decided to give this a try so she can drink regular water and still have the flavor

We use those slide hammers with hot glue at a auto manufacturing plant I work at. I think that glue is cheap and not quality. Because the stuff we use has gotten deforms out of door jams, hoods, side panels petty easily. And we have a heat setter that makes that glue come off really quickly. Although when we use em we’re usually setting them to bare metal. That might help with strength for us. And we also use dent pullers using a stud welder. You gotta get one of those for your next car video. It’s only around 125$ at harbor freight it obviously won’t be the quality tool that most body shops would use. But it’s essentially the same thing. It welds a little metal rod onto the dent (usually multiple studs for the same dent) and you just set the slide hammer to the stud using a little lock wheel on the tip of the hammer. And just slowly pull each stud until it’s out. Then break the weld by bending it at the weld or just cut em with a grinder and sand em flush. You gotta try em. They are awesome.

the ultimate dent puller is a chunk of broomstick and a mallet 🤣🤣🤣😂😂😂 has never failed me

Tyler, Tyler, Tyler......Let me help you out... The bottle is for denatured alcohol. It is used as a release agent for the glue. If you spray the alcohol on the glue tab after you use it, it will come off the tab. The same goes for the panel you are repairing. Also if you heat the panel with a heat gun or torch until it is warm (you don't want to burn your paint), the metal will move much easier and the glue will bond much better as well. All of the glue products do work, as I use them on a daily basis. Also, if you let the glue dry for too long it can become brittle and lose its designed strength. Pulling the dent just a little bit after the glue is dry to the touch is usually your best window. It is also much easier to get the correct amount of glue if you put the glue on the tab first and then stick the tab to the dent. I hope this helps!

Thank you for clarifying that up. Now I know what happened to my mother in law.

Would like to see you test headlight restoration kits.

Hi tyler new to your channel,really enjoying your videos and content.they help me pass the time and cheer me up while I'm recovering from a heart attack.All the best from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿

@johnbarber7952

Жыл бұрын

That damn vaccine!

the cricket in the background added a nice touch to the video. Even they were not impressed with the dent pullers.

Anyone realising Tyler casually dropping the sentence "...this is where I hit a deer or a person I don't remember witch one it was..."...wtf?!? 🤣🤣🤣

You could do like exhaust patches and tire repair kits and best road side assiasnts bag keep doing these great videos

Ummm ahhh did directions comes with any of these? Pure entertainment! Nothing more! 😂

We used these special rivets in shop class to do this. Basically you’d drill a hole, install this rivet called a “rivnut” and thread a bolt into it to put the slide hammer on. When you were done, you’d grind the head off the rivnut and touch up the paint.

@text5425

Жыл бұрын

Thanks for the feedback Expect more videos soon Send a direct message I have something special for you🎁🎁

My trucks gonna need one of these but in an extra large

Man idk why but 2:20 has my crackin the fuck up, just the way he levitates up them slams all of his force down

Tyler out here admitted to a hit and run

@natelax1367

Жыл бұрын

Next week: which product removes blood from the undercarriage?

The crickets in the back ground absolutely killing me 😂😂

has anyone else noticed that Tyler is starting to look rough like he needs some serious sleep? his face is literally starting to droop. genuinely concerned

GREAT!!! Got some dents in my fiberglass door i need pulled out!

that cricket sound effect was spot on hilarious 🤣🤣🤣

boiling water should soften the glue enough to get it out of the ridges of the that attachment

Hot water and a plunger works well too as I've seen👍🏾

Tyler, Shop Tour!!!!!! Wheres the trash go, whats behind the table and camera and editing. This would be awesome.

At about 2:20 I had to pause the video for this: And on the next Tyler video, watch him test the myth that car hoods can be dented! 😂😂

You need to scuff the plastic attachment bottom to get it to stick to the glue more. Also use a hair dryer to heat the glue after wards to remove it from the car surface. The type of dent matters also. The slide hammer dent remover you need to keep constant tension and proper alignment when using it. It’s more about using the hammer to get the last bit of pull not all of the pull.

Scratch repair stuff would be a good one to check out.

@text5425

Жыл бұрын

Thanks for the feedback Expect more videos soon Send a direct message I have something special for you🎁🎁

Love the cricket 🦗 sounds during the video.

Love the car vids😂

The two feet jump on the hood had me laughing so hard. "GANG GANG!" lolol

That's the problem with the Suction cup ones they always pop off before the dent can be pulled out. Best guess the spray bottles is for water for the suction cups. I love how your videos is giving itself crickets🤣.

The second one would actually work if it was not a thing produced for 5$ maybe, because I know for sure shops that use high end versions of these and do these dent repairs, and it takes skill as well its not a 5 minute tutorial manual work, it takes time to learn this, but it will for sure work, just you need practice and probably a better tool, the other ones are I would say really janky, and just for "it will do" situations.

I am glad to see you are doing well on youtube. You do a good job with the testing things and are funny. Make me think of how me and a friend would test things.

@text5425

Жыл бұрын

Thanks for the feedback Expect more videos soon Send a direct message I have something special for you🎁🎁

When you stood on the hood, I literally spit water out laughing

Dude you Jack septiceye and dope or nope were my first subscriptions so ive watched 95 % of your videos this series is top2 of all time please keep them coming. 👍

@text5425

Жыл бұрын

Thanks for the feedback Expect more videos soon Send a direct message I have something special for you🎁🎁

Try the headlight repair or that wipe new stuff or maybe which car wash bucket is best or car polish kit which ever or the tire cleaner

Those types of dents you made are actually stretching the the hood especially the one with the metal Hammer haha. I’ve used one of those on a fender dent and it popped right out.

@text5425

Жыл бұрын

Thanks for the feedback Expect more videos soon Send a direct message I have something special for you🎁🎁

You should review cricket catching Amazon tools and get that cricket in your garage

Ah Tyler... Readily explains what a slide hammer is, stumped by "zucchini". 😆

😂😂😂 I am dead after watching you scrape the hot glue off the hood. Thanks for the awesome video.

@text5425

Жыл бұрын

Thanks for the feedback Expect more videos soon Send a direct message I have something special for you🎁🎁

I've bought the slide hammer kit and still have it to this day. it's worked for me and pulled out a big dent I got on my door. I do agree that some hoods are just hard to pull out dents. But that kit has worked for me when doing doors and quarter panels. AND THE SPRAY BOTTLE IS FOR ALCOHOL TO HELP TAKE THE GLUE OFF LMAO.

i just realized i’ve been following you for 3 years now

0:36 what she told me during our first time

Best way to do it, a small dent like you where causing with the hammer, nothings really gonna pull those out. At my shop we usually use bondo on those, with the big dents we get a stud welder and weld a stud and get a rivet puller and pull the dent out with that, and fyi a dent in the hood is hard to pull. If it’s to big to Bondo, usually just have to buy a new hood, at least that’s how we do everything in my shop

Stomps the whole hood “Oh.. ok”😂

The cricket sound effects really add to the tension of this video.

Awesome Tyler. could you review flat tire repair kits and exhaust patches. Two things I have dealt with and would love to compare products. Also add to the Automotive series your making.