What DMR basics would you like covered?

@vernreed1969

2 жыл бұрын

I really liked this video. He mentioned a few conventions he used. I'd like to see that developed a little more. Give some best practices, some useful conventions to follow.

@californiakayaker

Жыл бұрын

It would have been great to see the links from the video in the comments. Then I could copy and paste text. Perhaps you could edit or add above or below the facebook to linkedin group of links ?

An island of DMR logic in a sea of DMR confusion. Thank you!!!

Outstanding video,, Duane! You demystified the CC/Repeater relationship beautifully - 73 DE NT7PS

You explained this well enough for this OLD GUY to understand and feel confident building a code plug. A video of exporting to Excel making changes then importing back to the CSI would be great.

This is by far the best DMR codeplug video out there.....thank you from a Duane to a Duane.

I am new to DMR and was totally confused - by now! Your video is the best explanation I have seen so far. Clear speech and straight forward. Concentrated on the really important things. NOW I GOT IT! Thanks a lot from Germany. 73

@BridgeComSystemsInc

6 ай бұрын

Hi! Thank you for your comment. We invite you to join our very large Facebook group. Here's the link to join: facebook.com/groups/BridgeComSystems. Also, you might want to check out our best-seller plug-and-play package: www.bridgecomsystems.com/pages/plug-and-play-package.

I don't usually comment, but I must say, your video makes the most common sense programming, that I have heard on You Tube. thanks again . definitely worth saving in my favorites .... 73's Randy

This video is your Holy Grail. Thank you. There are a ton on KZread videos (including yours) that go through programming code plugs, but they go through settings as if everyone knows what the settings are for. This video broke it down, and slowly explained it. This video will help any novice get on the air within minutes. Thank you BC and thank you Duane N6DMR (cool callsign by the way).

@BridgeComSystemsInc

2 жыл бұрын

Glad it helped!

@vernreed1969

2 жыл бұрын

Great video. You got not just the what and the how, but also the why. And explained the what.

Thank you for posting this video, this was an easy enough illustration of how to start a quick codeplug.

EXCELLENT VIDEO!!!

@BridgeComSystemsInc

Жыл бұрын

Yes! Thank you for your comment.

Great presentation, great style and presentation skills as well. I would encourage you to develop a video on using Pi-Star and Brandmeister as well.

I am not a ham as yet. I heard of DMR but did not know a thing about it. I have been trying to get there. Miss the questions by one. This is something I never through of. It is very well done that I can see of. Thanks

@BridgeComSystemsInc

Жыл бұрын

Check out our Plug-n-play package: bit.ly/3Lgiz1k

That was really excellent!

@BridgeComSystemsInc

8 ай бұрын

Hi! Thank you for your comment. We invite you to join our very large Facebook group. Here's the link to join: facebook.com/groups/BridgeComSystems. Also, please check out our plug-and-play package: www.bridgecomsystems.com/pages/plug-and-play-package.

Super helpful. As a new Ham, I've been trying to wrap my head around DMR operation/programming/etc.

@BridgeComSystemsInc

8 ай бұрын

Hi! Thank you for your comment. We invite you to join our very large Facebook group. Here's the link to join: facebook.com/groups/BridgeComSystems. Also, please check out our plug-and-play package: www.bridgecomsystems.com/pages/plug-and-play-package.

Thanks for your help Duane. Looks like I had a configuration issue but I'm now on the air thanks to your help. Rick (W7OLA)

Just what i was looking for. Thankyou.

@BridgeComSystemsInc

3 жыл бұрын

You are very welcom, Tony! Glad you enjoyed it!

Duane, you nailed it with this DMR how-to... Finally, someone explains the how and why of DMR codeplug basics. The only question I have is you mention that we can erase our codeplug and start fresh, but you don't show us how. I downloaded a bloated codeplug from Bridgecom support to get started and it is way too complicated. Now, if only Bridgecom would do a video on how to navigate through "using" a codeplug from the radio. So we built it, but you should take us through how to operate through the radio menus to find what we created. 73, Mark WU6R

@BridgeComSystemsInc

8 ай бұрын

Hi! Thank you for your comment. We invite you to ask your question in our very large Facebook group. Here's the link to join: facebook.com/groups/BridgeComSystems. Also, please check out our plug-and-play package: www.bridgecomsystems.com/pages/plug-and-play-package.

Very well done. Very clear

@BridgeComSystemsInc

3 ай бұрын

Hi! Thank you for your comment. We invite you to join our very large Facebook group. Here's the link to join: facebook.com/groups/BridgeComSystems . Also, you might want to check out our best-seller plug-and-play package: www.bridgecomsystems.com/pages/plug-and-play-package.

A good video on making a code plug - not an easy task.

You can Scan memory channels or VFO by long pressing (while display is on) the zone key in the center Up or Down. Quick pressing the opposite direction on the pad will reverse direction of the scan. Another handy shortcut is long pressing the 0 key. That will manual dial by default. At least the 1.21 Firmware on AT-878UV will do these things by default. May or may not apply to other models or previous firmware. I have no idea. 73!

Great video! Thanks!!!

@BridgeComSystemsInc

2 жыл бұрын

Glad you liked it!

Great job, thank you

@BridgeComSystemsInc

11 ай бұрын

Thank you too! Our Pleasure!

Outstanding job!

@BridgeComSystemsInc

Жыл бұрын

Thank you very much! Thank you for your comment

Thanks for the Video, I saw some procedures that include a Disconnect TG, any reason for not including here?

very good explanation.for me...sorry K7BEN or W7BEN? listed and input data in was different?

Im from jax fl!

Thanks for a great video this has been so helpful KD9OGA

I never understood multiple entries for the same frequency. It's very simple to change the tg or time slot on the fly. Much easier than having such a mess in memory. Getting good with the radio is important IMO. It seems like the computer is never around when you need it.

@BridgeComSystemsInc

8 ай бұрын

Hi! Thank you for your comment. We invite you to join our very large Facebook group. Here's the link to join: facebook.com/groups/BridgeComSystems. Also, please check out our plug-and-play package: www.bridgecomsystems.com/pages/plug-and-play-package.

Merci , 73

@BridgeComSystemsInc

Жыл бұрын

You're welcome!

FINALLY! I am no longer in the dark! The sun is coming up. I am just guessing here but I'm assuming that you have to save the codeplug (with a name?) and then upload it to the radio.

@wilsonruizv

2 жыл бұрын

So you don't have to save it (but you should). You can just write to radio. But every time you make a change to your code-plug you should save it to your computer with whatever name convention that makes sense to you (I use ). This way I know for what radio is the code-plug and the date I created it. Plus it is a good way to backup.

On your next update to the CPS software please add a control+ F search function, and a page up/down scroll function; it's almost impossible to find what you're looking for in your talk groups, channels, and contact list when there are thousands of entries. KO4ZCJ Rjo Memphis TN

Do Analog channels need to have a Contact reference? It appears that they do even though I don't think it would be "used".

@BridgeComSystemsInc

5 ай бұрын

Hi! We invite you to ask your question in our very large Facebook group. Here's the link to join: facebook.com/groups/BridgeComSystems. Also, you might want to check out our plug-and-play package at this link: www.bridgecomsystems.com/pages/plug-and-play-package.

What's the point of a pre-made code plug if I'm using a Hotspot on a different frequency?

So Im newto DMR. I have things working fine. My question is my friend has a dmr radio as well. Can I set up a code plug just to talk to him only and not thru a repeater or a huge talk group?

@BridgeComSystemsInc

8 ай бұрын

Hi! Thank you for your comment. We invite you to ask your question in our very large Facebook group. Here's the link to join: facebook.com/groups/BridgeComSystems. Also, please check out our plug-and-play package: www.bridgecomsystems.com/pages/plug-and-play-package.

I don't have the DMR Mode option on my Channel Information Edit.

@BridgeComSystemsInc

3 жыл бұрын

Hello there! Thank you for reaching out with your question. For better assistance, please submit a support ticket on our website by clicking the link below: bridgecomsystems.freshdesk.com/support/tickets/new

09:10 I think w4rnG does not want to be called w4rnJ.

I followed this three times through. This software will NOT write the info for repeaters to my radio. It will put things in but i cant transmit. It does not work and i dont know why. Yes, everything is the latest version. What else can i do?

@SteelWolf13

3 жыл бұрын

match the freq to your dmr hs?

@nbk7st6

3 жыл бұрын

maybe you still have a bogus ID in the DMR ID row. Please check.

It's a little confusing watching you do things 30 seconds before you talk about what you're doing, or to flip that around, listening to what you did onscreen 30 seconds ago.

Awesome video, Learned a great deal W4BAF

@BridgeComSystemsInc

2 жыл бұрын

Very good!