Such a beautiful piece. Very inspired.

Love it brother

Very nice build, you just gave me an idea on how to build my next photo booth. I'm working on building my 5th photo booth and was basically looking to build something different than what I already have.

Great job!

Thanks for encouraging me to do my own. I follow all your videos. When my lights came in yesterday I set them up like you placed yours and I found it messed with the camera some. I chose to have mine forward and made a few other changes.

Thank You, Thank You Thank You!!

If you don't mind. Can u share dimensions?

Nice build, have you thought about using vinyl wrap to cover the booth vs paint? I made an arcade cabinet and used it, turned out nice.

Maybe replace the velcro with strong magnets. This is GREAT! Thanks.

That looks really nice - what Photo both App do use on the iPad?

For a power supply that isn’t clunky that might fit in there easier, I would look into the Halo Bolt. They are about $100 each. You can get 2-3 as a backup just in case but the battery should last at least a few hours at a time. It can power an EV ZLX 15 for 2 hours with a microphone and mixer at a pretty loud volume so I imagine a photobooth would last pretty long in comparison since the iPad has its own battery.

@djtravismcguire

Жыл бұрын

I tried that. I was hoping it would work. The lighting requires an Edison plug. The problem with that halo bolt is of you have the Edison plug pack on, it delivers the same amount of energy whether something is plugged into it or not, so it dies in two hours. We tested it twice and couldn't get anymore than 2 hours out of it.

what software have you used in the ipad or it just you have placed it in the booth where the client will route itself to the camera and click the picture? can you create a video on that?

Do guests control the lights with a remote or an app on the ipad?

You could do the Milwaukee Tools batteries for Impacts and power drills. Then that would run 4-6 hours of power. Any home depot has this setup.

I noticed during the video that the photo booth fit snugly into the case. Then, by following the link in the description for the case, you see that the inside dimension of the case is 57.5 inches X 18 inches X 6 inches. So, for those of you who want the dimensions for the photo booth, it should be really close to those measurements.

I just got the same base. Can you tell me where I can find the parts you used to fasten the wood to the base

What are the measurements used for the frame and plywood?

Do you have any photos taken from it that you can share to see how the images came out?

Where can I get the bottom stand from?

Hello- could you please tell me the height of the overall unit. Thank you in advance

What app do you use? Great idea btw

Awesome, where can i get the lights?

Can you add a built in mini printer.

Nice build!! Simple, yet elegant! I especially like the battery powered idea! I'm wondering if the HALO Bolt 58830 mWh Portable Battery pack would suffice to power this? Thanks for the idea! This will definitely be a future build of mine!

@djtravismcguire

Жыл бұрын

The halo bolt won't last if you use the Edison plug. The ONLY downside to the halo bolt is that when using the Edison plug, it will die in two hours regardless on if anything is plugged into it. It delivers constant energy even if nothing is plugged into it.

@terrytunks-spectrumeventdesign

Жыл бұрын

did the HALO Bolt 58830 mWh work for you

is it possible to get the size of the product ? thank you!

cuales son las medidas

Thank you very much, i buly my own photobooth and i inspired in yor design, i would like show you but i can´t attached any photo or video in youtube,

Can you share measurements please? Of if you have plans on how to build it out that would be super helpful. Thanks.

Here coz I can’t be asked to buy very expensive photo booths. Ty

Thanks Travis, I love the idea of a DYI Photo booth. Can you talk about the software needed?

@djtravismcguire

Жыл бұрын

I use Snappic

@djjustino5203

Жыл бұрын

Where are the links for the lights and also where did you get the base?

@djtravismcguire

Жыл бұрын

@@djjustino5203 so the lights are hooked up to their own power supplies and is controlled by a remote. So I set the lights to white for weddings and set it to patterns if I have an outdoor event of I don't need lighting for the booth. The base is a Rockville collapsible totem base which you can purchase from Amazon, just the bases.

@djjustino5203

Жыл бұрын

Okay but what lights are they? Where do I find them

@djtravismcguire

Жыл бұрын

@@djjustino5203 link for the lights are in the description.

Do u sell these? Very cool..

I need one for me how much did you charge me ?

This is so Awesome! What Would You Charge Me To Make This And Sell It To Me?

Use jackery portable power station

I would like to share what I did with you for your next one. I built mine today in 6 hours bur I have been a finish carpenter for 32 years and have own my own cabinet shop in the past.

@marlandhunter392

Жыл бұрын

Hit me up and we can figure out a platform to communicate on.

@djtravismcguire

Жыл бұрын

Find me on Facebook. Travis McGuire

@Kjreyes0406

Жыл бұрын

Any ideas on why my build feels a bit flims?. Meaning it wobbles with finger point pressure when pressing on the iPad

Can I order one from you?

How much does it weigh?

@djtravismcguire

4 ай бұрын

About 25 pounds.

I'm trying to find you on facebook so I can send you a message. I'm looking to build one of these looking for the measurements to cut the wood. Thanks

@djtravismcguire

Жыл бұрын

Can be difficult to find me on Facebook LOL

Nice build what about the printer 🖨?

@djtravismcguire

11 ай бұрын

I don't offer prints. I'm a solo-op, so I don't have time to worry about having to reload printers or media. I advertise mine as a digital photo station.