Get the Build plans here! www.yellowhammerwoodcrafts.com/store/p/vogue-photo-booth-build-plans

@adeyemitaylor5868

2 ай бұрын

How can I order one from you?

@yellowhammerwoodcrafts

2 ай бұрын

@@adeyemitaylor5868 are you in Alabama? Or can pick up in Alabama?

@yahteciawallace401

2 ай бұрын

How much do you charge to build and ship to Michigan?

@yellowhammerwoodcrafts

2 ай бұрын

@@yahteciawallace401 can’t ship. Sorry

I love it. I want to build one for my wedding. Thank you, thank you

Maravilloso! Un saludo desde espña. voy hacer uno parecido al tuyo y los Bed rail fasteners me han venido estupendos, muchas gracias.

Thank you. Loved the video and the finished project. Very informative.

@yellowhammerwoodcrafts

2 ай бұрын

Thank you

Turned out great ❤

Looks great & a great video! 💯

@yellowhammerwoodcrafts

4 ай бұрын

Thanks

I thought for sure you were going to strike a pose 😁 Looks great!

@yellowhammerwoodcrafts

4 ай бұрын

😂

RTR! First video after watching you on 731 Woodworking podcast. You have produced a wonderful idea that displays both your creative and woodworking skills. I will be looking into this project's feasibility in my area (Mobile).

@yellowhammerwoodcrafts

Ай бұрын

Mobile would be a great area. Probably a lot of events in that area!

Great video gave my wife inspiration to give me something to do 😂 honestly though came out great 👍🏽

@yellowhammerwoodcrafts

4 ай бұрын

😂

RTR Florence,AL here!

@yellowhammerwoodcrafts

Ай бұрын

Roll Tide

Awesome video, I bought the plans! A question I haven’t seen anyone else ask.. how are you transporting this or how are people picking it up? Seems like a large box trailer or utility trailer is the only option? Thanks for your videos.

@yellowhammerwoodcrafts

3 күн бұрын

I sold it to an event coordinator and she has a box truck

Hello. Very detailed explanation on the build but can you please elaborate more on how you wired the recess light. Thank you.

@yellowhammerwoodcrafts

2 ай бұрын

Each light comes with a black box. Your first black box will have the wires from the extension cord coming into it. (You cut the female end to expose the black white and ground) wire those into the light wires and you will also have the wires you need to go from that box to the next. The next box will have the light wires and your jumper wires from the first box. And so on.

@olubisilatinwo1931

2 ай бұрын

Thank you.

Thank you so much for posting! Would you say this is foldable or collapsible? 😮

@yellowhammerwoodcrafts

13 күн бұрын

5 pieces like the video shows.

Looks great!! I would love to purchase! Can this be shipped to NC?

@yellowhammerwoodcrafts

Ай бұрын

No, sorry. I don’t ship them. I do sell plans for it though. If you can find someone local to build it.

Did you shoot the Brad najls straight through the plexiglass glass?

@yellowhammerwoodcrafts

Ай бұрын

No. Brad nails will not go through plexiglass. Pre dill and screws

Hello, Where can I find the assembly hinges?

@yellowhammerwoodcrafts

3 ай бұрын

Link is in the description

What is the width (thikness) of the plywood? It is not included on the project details.

@yellowhammerwoodcrafts

2 ай бұрын

1/4”

how are all 4 junction boxes connected? i can only connect 1 to 2, how do i get 2 to 3 and 3 to 4?

@yellowhammerwoodcrafts

3 ай бұрын

14 gauge romex wire. Take the blacks, whites and grounds out of the yellow jacket and use them to connect one box to the other

@yellowhammerwoodcrafts

3 ай бұрын

Watch at 4:45

i bought the plan but it doesn't say where to buy the plexiglass, please help! thanks

@yellowhammerwoodcrafts

Ай бұрын

Got mine from Home Depot

Hello, sr can you tell me who you install in the wood the plexiglass please thank you

@yellowhammerwoodcrafts

3 ай бұрын

Same as the plywood. It’s sandwiched between the trim boards on both sides. Then screwed all the way through.

@keishalewis8385

2 ай бұрын

What is the exact size of this build?

@yellowhammerwoodcrafts

2 ай бұрын

@@keishalewis8385 6 x 4 x 7

What is the width (thikness) of the pleksiglass?

@yellowhammerwoodcrafts

2 ай бұрын

I think I used 1/8

What kind of router bit did you use?

@yellowhammerwoodcrafts

3 ай бұрын

It’s just a flush trim straight bit

Where did you purchase the plexiglass?

@yellowhammerwoodcrafts

Ай бұрын

Home depot

Those numbers aren’t lumens, that’s color temperature. Just a small detail there.

@yellowhammerwoodcrafts

4 ай бұрын

Something told me I was wrong on that after I was done with the video. You know what it was? The box! 😂

Was it made to be assembled and dissembled as one piece for easy transport

@yellowhammerwoodcrafts

2 ай бұрын

Breaks down into front, back, side and top pieces

@gumclothingstore

2 ай бұрын

Makes sense. You did a fantastic job!

@gumclothingstore

Ай бұрын

@@yellowhammerwoodcrafts so you inspired me! I am creating one. I have placed the bed brackets in the back wall and beam. Once it was put in place with the beam for the side wall, its a little loose. I'd like to get your insights on it.

@yellowhammerwoodcrafts

Ай бұрын

@@gumclothingstore no way for me to know without seeing it. Shouldn’t be loose.

@ShannonCox-wd1dc

Ай бұрын

I just got my plans. I noticed you were picking everything up by yourself. How much would you estimate the unit to weigh?

Where can you buy the 6x8 ft plexiglass?

@yellowhammerwoodcrafts

Ай бұрын

I used two 4x8 sheets and cut a foot off both. I couldn’t find any local 6’ wide but there are places that had it. Was just too far away for me.

@justadream_ugc

Ай бұрын

@@yellowhammerwoodcrafts Could you share who the 6'? I want to create this without the seem and willing to pay shipping

@yellowhammerwoodcrafts

Ай бұрын

@@justadream_ugc I just googled places with plexiglass and called around. I have no idea what places they were now. Sorry.

What size plexiglass are you using?

@yellowhammerwoodcrafts

3 ай бұрын

1/8 or 1/4 works fine

@anthonymanns5867

2 ай бұрын

Is there a line in the photo where the plexiglass meets ?

@yellowhammerwoodcrafts

2 ай бұрын

@@anthonymanns5867 not if you use a 6’ piece. I couldn’t get one around here but they are available in some places. The line is barely noticeable and the pictures I’ve seen, I can’t see it.

Hi, I own a photography business in Georgia. I interested in buying this from you directly. Is that possible? I’m Located 25 mins out of Atl.

@yellowhammerwoodcrafts

2 ай бұрын

Yes if you can pick up. It’s $2000

Can I make this for under 500

@yellowhammerwoodcrafts

Ай бұрын

No. You can for double that.

How much did the materials cost you

@yellowhammerwoodcrafts

Ай бұрын

Right at $1000

Where are you located? What are your rental rates

@yellowhammerwoodcrafts

2 ай бұрын

Pell City, Alabama. I don’t rent this. I sold it to someone who does. She’s in Birmingham and rents for $650

Hey! I built this but my plexiglass is bulging in the middle a little bit. Any suggestions?

@yellowhammerwoodcrafts

2 ай бұрын

You need something to hold it flat when you put the trim around it. If it’s sagging in the middle when you put the other side of trim on it’s going to stay sagging

How much does it cost to install

@yellowhammerwoodcrafts

2 ай бұрын

I’m assuming you mean cost to build? It cost me about $1000 to build. Sell for $2000

@user-pl1cx3sp7h

2 ай бұрын

@@yellowhammerwoodcrafts The price for installation

Do you sell these as well?

@yellowhammerwoodcrafts

3 ай бұрын

Custom orders

@adeyemitaylor5868

2 ай бұрын

How much is the custom order?

@yellowhammerwoodcrafts

2 ай бұрын

$2000

How much do you change to make? Do know any builders

@yellowhammerwoodcrafts

2 ай бұрын

I charge $2000 to build it. You can buy my plans and take them to any builder in your area. Not sure what others would charge though

Do you sale the booths

@yellowhammerwoodcrafts

Ай бұрын

Yes. $2000. No shipping

What size boards ?

@yellowhammerwoodcrafts

2 ай бұрын

It doesn’t say in the video?

@dawidmajkowski156

2 ай бұрын

it probably is, but I come from Poland and I don't fully understand English. could you write?

@yellowhammerwoodcrafts

2 ай бұрын

@@dawidmajkowski156 ahhh now I understand why I get a few questions like this. Sorry. I didn’t think about that. So the front is made with 1x5s and the sides and back are 1x4s. 1/4” plywood for sides and back. 1/8 plexiglass

@dawidmajkowski156

2 ай бұрын

Thank you 🙂