No video

DIY Vehicle Water Storage: Roof Top, Pressurised, Hot Water

We join host Hoocho in Building The Ultimate Roof Top Pressurised Hot Water Storage
Stuff you need:
Garden Hose Male Quick Connect Coupling 1/2 inch Female:
hydroland.com....
Bulkhead Tap/Ball Valve with 13mm Barb (1/2 BSPP):
hydroland.com....
Brass Female Garden Hose Connector x 12mm - 1/2'' Grip Hose Connector:
hydroland.com....
Protek 125ml Red Priming Fluid
www.bunnings.c...
Protek 125ml Type P Green PVC Cement For High Pressure Pipes
www.bunnings.c...
Holman 100mm 45° Female And Female PVC DWV Plain Junction
www.bunnings.c...
Holman 100mm PVC DWV Threaded Access Cap:
www.bunnings.c...
Tire Valve Tubeless Metal Valve Stems:
amzn.to/3IRoIOT
Patreon: / hoocho
Welcome to "All the Gear. No Idea"
Where inexperience meets enthusiasm.
On this channel we explore hobbies and pastimes for the first time, looking to expand our skills and experience by seeking out new and exciting pursuits.
Conquering our inexperience with pure enthusiasm and perhaps even discovering our ikigai along the way.

Пікірлер: 17

  • @parkerjacobsen1220
    @parkerjacobsen12203 ай бұрын

    I was here before 10k subs. Keep it up dude!

  • @brianmarshall7214
    @brianmarshall72144 ай бұрын

    Yes mate, I would say that a pressure relief valve is essential. Thanks for a great video Hooch!

  • @jeremiahbullfrog9288

    @jeremiahbullfrog9288

    4 ай бұрын

    meh, you don't want PVC shrapnel in your eyeballs? weak 🤣

  • @_SurferGeek_
    @_SurferGeek_4 ай бұрын

    9:14 - RUD 'Rapid Unscheduled Disassembly' 😁 I have a similar setup on my 4Runner. I also installed a pressure gauge so I can check as I'm using it.

  • @AllTheGear-NoIdea

    @AllTheGear-NoIdea

    4 ай бұрын

    😂 currently looking for a pressure release and a gauge. Anti-RUD devices.

  • @davidmoore7303
    @davidmoore73034 ай бұрын

    A small empty 1kg gas bottle pressurized with compressed air as a supply. Also a relase valve on the tank. We used compressed air to pump diesel from belly tanks under trailers to the prime mover, always had a release valve.

  • @belleomalley1022
    @belleomalley10224 ай бұрын

    I love the disbelief laugh. Solid one, Hooch! I'm fitting out my van at the moment and I might give it a try

  • @CatHamster-wf5xs
    @CatHamster-wf5xs4 ай бұрын

    Nice 1 Mr Hoocho. You could add a ball valve three quarters along to make it into a vehicle mounted potato cannon.

  • @AllTheGear-NoIdea

    @AllTheGear-NoIdea

    4 ай бұрын

    I can grow my own potatoes, an ammunition farm for my mobile potatotank....

  • @Scrambles7
    @Scrambles74 ай бұрын

    BIG DOG!! Hell yeah brother, great video. I'm using 2, 20L water jerry's in my Ute's canopy with a 12v water pump connected to the second battery. I love my system, but this is a great idea. Keeps storage in the tub more free.

  • @adamf7561

    @adamf7561

    13 күн бұрын

    Do you happen to know if there is a way to connect a water collector to a pressurised water tank like that?

  • @SirBennyJon
    @SirBennyJon4 ай бұрын

    Our house water pump runs at 90 psi. Even our smaller one we replaced went to 60 psi.

  • @user-it2eu8re5r
    @user-it2eu8re5r4 ай бұрын

    Damn you have a second great channel

  • @AllTheGear-NoIdea

    @AllTheGear-NoIdea

    4 ай бұрын

    🤣👌🏻

  • @BenNadiaSherwood
    @BenNadiaSherwoodАй бұрын

    Love the idea mate! Any idea of the overall cost ?

  • @jeremiahbullfrog9288
    @jeremiahbullfrog92884 ай бұрын

    A small portable air tank would act as a capacitor between the 12V pump and the full water tank. Install a 40psi pressure regulator and a check valve. Then you can fill your pipe completely with water and prevent overpressure. I could provide product links but YT hides them.

  • @jeremiahbullfrog9288
    @jeremiahbullfrog92884 ай бұрын

    @10:45 "give it a second" .... yeah we all feel the effects of aging, youth is wasted on the young lol