DIY: Upper Radiator Hose Replacement 2007-2010 Hyundai Elantra

Автокөліктер мен көлік құралдары

DIY: Upper Radiator Hose Replacement 2007-2010 Hyundai Elantra
Welcome to my channel, where today I'll be showing you how to replace the upper radiator hose on your 2007-2010 Hyundai Elantra. This is a simple DIY job that will save you a lot of money compared to taking it to the mechanic. In this video, I'll show you how to replace the hose with an OEM part that is better and less expensive than aftermarket options. I'll walk you through every step of the process, from removing the old hose to installing the new one. So, grab your tools and let's get started!
Disclaimer for DC Auto Enhancement
We are doing our best to prepare the content of this site. However, DC Auto Enhancement cannot warranty the expressions and suggestions of the contents, as well as its accuracy. In addition, to the extent permitted by the law, DC Auto Enhancement shall not be responsible for any losses and/or damages due to the usage of the information on our website.
By using our website, you hereby consent to our disclaimer and agree to its terms.
The links contained on our website may lead to external sites, which are provided for convenience only. Any information or statements that appeared in these sites are not sponsored, endorsed, or otherwise approved by DC Auto Enhancement. For these external sites, DC Auto Enhancement cannot be held liable for the availability of, or the content located on or through it. Our Privacy Policy was created by the Privacy Policy Generator. Plus, any losses or damages occurred from using these contents or the internet generally.
2007 Hyundai Elantra
2008 Hyundai Elantra
2009 Hyundai Elantra
2010 Hyundai Elantra

Пікірлер: 13

  • @stampedetrail2003
    @stampedetrail20032 ай бұрын

    Nice. Came here to verify coolant hose placement for my 2007 Tucson. It had a condition where the heater would take forever to kick in and I thought perhaps the coolant lines were swapped but it looks like that's a neg. Thermostat is the culprit. Thanks again.

  • @DCAutoEnhancement

    @DCAutoEnhancement

    2 ай бұрын

    Thanks for watching!

  • @xraykadiddlehopper8067
    @xraykadiddlehopper806711 ай бұрын

    Thanks for the decent video 👍

  • @DCAutoEnhancement

    @DCAutoEnhancement

    11 ай бұрын

    Thanks for watching

  • @tripinvest8160
    @tripinvest81603 ай бұрын

    2007 model is way harder to get to that bottom hose

  • @DCAutoEnhancement

    @DCAutoEnhancement

    3 ай бұрын

    Good information, thank you!

  • @mikestackz854
    @mikestackz85411 ай бұрын

    Do you have to drain it first?

  • @DCAutoEnhancement

    @DCAutoEnhancement

    11 ай бұрын

    I just put a catch pan under the car because it's the highest point of the cooling system and I didn't want to drain the whole system just for that hose. You will want to bleed the system after changing the hose and topping off the coolant.

  • @mikestackz854

    @mikestackz854

    11 ай бұрын

    @@DCAutoEnhancement how do you bleed the system?

  • @DCAutoEnhancement

    @DCAutoEnhancement

    11 ай бұрын

    Here is a video. It's a similar process as what this video shows. There is probably a video out there of someone doing this on your car. kzread.info/dash/bejne/oaWXqtybk9u2Zag.html

  • @mikestackz854

    @mikestackz854

    11 ай бұрын

    @@DCAutoEnhancement I have a 2005 Hyundai sonata I bought a new hose for it and didn’t know how to do it I usually take to to a mechanic but he’s on vacation, thanks

  • @DCAutoEnhancement

    @DCAutoEnhancement

    11 ай бұрын

    @@mikestackz854 no problem. The bleeding can wait until he is back

Келесі