DIY Ultimate Cornhole Boards with lights and speakers
Тәжірибелік нұсқаулар және стиль
Easy Cornhole Board Plans:
www.oxintheshop.com/product-p...
This is the Ultimate tailgater sport fan cornhole boards with a little added bonus. I have wanted to make these for a while now and I finally got around to them. I think they turned out awesome. Since the boards are engaved we had to use a selfleveling countertop epoxy so they would still work like they are supposed to. I hope you enjoy the video and think about subscribing and clicking that like button.
/ oxintheshop
www.oxintheshop.com
/ oxintheshop
/ oxintheshop
Javi’s Woodshop
/ @javiunboxed
Part Time Cameraman
/ therealgoatpro
CornHole Board stuff
Lights amzn.to/2wtlpGd
Countertop Epoxy amzn.to/2wt0jHZ
V bit amzn.to/2wsMN7e
Bags: amzn.to/2Dw2weK
Lights: amzn.to/32qLI3x
Scoretower: amzn.to/3epw0ru
Tools:
Sawstop: amzn.to/3a47quW
Irwin Clamps: amzn.to/3ftBy5y
Dewalt Drill combo: amzn.to/3aLieOt
Grizzly Bandsaw: amzn.to/34Nl5oz
Dewalt Miter Saw: amzn.to/385xe81
Festool Dust Collector: amzn.to/3dzfbLu
Kreg Jig: amzn.to/2SylbKS
Small Kreg Screw box: amzn.to/2Hjoe4c
Bulk Kreg Screws: amzn.to/2P1DZkX
Ryobi Jigsaw: amzn.to/3cGt89B
Music:
1st song
Rock Angel by Joakim Karud / joakimkarud Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0 creativecommons.org/licenses/b...
Music provided by Audio Library • Video
2nd song
JPB - High [NCS Release] • JPB - High | Trap | NC...
SoundCloud / anis-jay
Facebook / jayprodbeatz
Twitter / gtaanis
Instagram / gtaanis
3rd song
Life Is by Cosimo Fogg (201) / cosimo-fogg
Creative Commons - Attribution 3.0 Unported- CC BY 3.0 creativecommons.org/licenses/b...
Music provided by Audio Library • Life Is - Cosimo Fogg ...
4th song
We Are One by Vexento / vexento / vexento
Music provided by Audio Library • We Are One - Vexento (...
Tools and Video Equipment
Easy Wood Tool Rougher amzn.to/2sJWCAr
Easy Wood Tool Finisher amzn.to/2uO9qm4
Easy Wood Tool Detailer amzn.to/2utVKx0
Nova Lathe Chuck amzn.to/2stp8lO
Dewalt Miter Saw amzn.to/2nVIi4Q
Grizzly Bandsaw amzn.to/2nVA5h5
Dewalt Planer amzn.to/2mGloOS
Grizzly Drill Press amzn.to/2nYnV7m
Dust Deputy Cyclone amzn.to/2mGfCgh
Bosch Router amzn.to/2nlO3Wz
Dewalt Drill Combo amzn.to/2n7pdYS
Delta Table Saw amzn.to/2n7sLdD
Ryobi Brad Nailer amzn.to/2nqWbGV
Irwin Clamp amzn.to/2nYs2QZ
DJI Phantom 3 amzn.to/2n7qzTx
GoPro Hero LCD amzn.to/2n7EKrx
Disclaimer: This video contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. Thank you for your support
Пікірлер: 423
Incredible workmanship! I just made two boards with UGA laminates, lights for the holes and 2 Altec Lansing paired Bluetooth built in speakers. I’m throwing both boards away after seeing your two boards…
Sweet Drew!! Lots of fun with Cornhole as it is but with the way you made them , the look the light and the music, just adds to the excitement. Great job Bro.....
Just stumbled on this video. Being a Georgia boy myself I had to check it out. Gotta say those are the most well thought out and most insanely awesome set I’ve ever seen!.... GO DAWGS!
@oxintheshop
6 жыл бұрын
Thanks Chris I’m glad you like them. Go dawgs sic em
Great Job Drew! Nice to see you using Jimmy's Ice Pick! I like the epoxy top, and the playing music when you score is an awesome idea!
@oxintheshop
6 жыл бұрын
Bear Creek Woodworking thanks and yes I use my diresta ice pick all the time
Awesome build and video! Best cornhole boards I've ever seen! Go Dawgs!
@oxintheshop
6 жыл бұрын
thanks that is awesome. share the video to all your fellow DAWG friends GOOOOO DAWGS!!!!! SIC EM!!!!! WOOOOF WOOOOOF WOOOOOF
The best design I’ve seen yet. Better than my cornhole board builds. Great job!
@oxintheshop
6 жыл бұрын
lol Im sorry. Im sure yours are awesome too. thanks for watching
Good job Drew! That CNC is an awesome tool to have!
@oxintheshop
6 жыл бұрын
thanks and yes it does come in handy
Everybodys like yea I can build that......then he whips out the cnc machine.
@oxintheshop
6 жыл бұрын
yea had to step it up a notch
@ivancarrejo6551
6 жыл бұрын
a notch???..like 100 notches!!!..lol
@thejourniganadventures7391
5 жыл бұрын
toolman101476 right 😂 I was thinking the same thing.
@spydergs07
5 жыл бұрын
You can get small shop CNC machines for like $6k. They are not that expensive.
@frankborja25
5 жыл бұрын
Ox In The Shop....a notch? that kind of work is not in the ordinary guy's orbit...
Those boards are freaking awesome!!! Gotta step my game up now!!! Great job!!!
@oxintheshop
6 жыл бұрын
thanks let me know what you come up with
@markmoody4699
5 жыл бұрын
Was going to ask same thing..need to find them anyway
LOVIT ! Better then the few I’ve made with LED LIGHTS but the CNC just went over the Top Dude ! Thx’s for Sharing from St Joseph, MO.
@oxintheshop
5 жыл бұрын
The cnc was intended to be over the top. Thanks for watching
Nice job Drew! Cool project and outcome.
@oxintheshop
6 жыл бұрын
Mike Kapotsy thanks
Good job Drew They turned out great
@oxintheshop
6 жыл бұрын
Nealons Wooden Treasures thanks Steve I think so as well
Pretty sweet cornhole boards. Love the storage compartment and the led/music upgrade. The design wether you're a UGA fan or not should be appreciated. That style could be made with any team.
@oxintheshop
6 жыл бұрын
ManCraftingTM thanks chad I always enjoy reading your comments because they are unbiased and read in a way that is appreciating the work as well as helping others appreciating it as well.
@dimensionswoodworks
6 жыл бұрын
Everyone always has something to say, no matter what team you do!!! #RTR🐘🐘🐘. lol 😂
Awesome boards and the CNC machine really finished them off nicely! Subscribed!
@oxintheshop
3 жыл бұрын
Thanks glad to have you
Great job! Now it is wide open to other team designs.
@oxintheshop
6 жыл бұрын
JK's Timber Scraps thanks and yes that is true
Probably one of the nicest sets of boards I hace ever seen
@oxintheshop
6 жыл бұрын
Thanks and that is awesome I’m glad you think that. I was trying to just make some no one has seen and I think/hope that’s what I did.
Those are amazing. Great job.
@oxintheshop
4 жыл бұрын
Thanks glad you like them go Dawgs
One of The nicest sets I’ve ever seen
@oxintheshop
5 жыл бұрын
Thanks
Just one word.................Beautiful!!! Awesome Job!!
@oxintheshop
4 жыл бұрын
Thank you tony
WOW that's the best I have seen so far.🔥💯👌👍✔🙏
@oxintheshop
4 жыл бұрын
Thanks as far as I know it is the first of its kind
Great build. Thanks for the video!
@oxintheshop
6 жыл бұрын
The Hamlin Woodshop thanks for watching
if those were my boards they would be hanging on the living room wall! great work!
@oxintheshop
5 жыл бұрын
Lol thanks
Great design and build.
@oxintheshop
6 жыл бұрын
thanks chris. they are awesome
Dang that's the nicest set of cornhole boards I've seen so far, excellent job bud!
@oxintheshop
4 жыл бұрын
Thanks so much ray thanks for watching
Drew, you should have.....just kidding. Honestly, the coolest set of corn hole boards I've seen yet. I love the video! But kind of hate it at the same time....it adds a project to my ever growing list of projects. When I make mine, I'm hoping they look half as good as these do. Awesome job!
@oxintheshop
6 жыл бұрын
thanks Devin, I am glad you liked the video and i look forward to seeing the ones you build. thanks for your support as always
daaayyyyuuummmm...those are badass!!! good job!!
@oxintheshop
6 жыл бұрын
thank you and thanks for watching the video
Amazing job!!! I wish I could have a CNC machine like yours…
that CNC design/operation was pretty amazing. As a DIY guy...got to admit those CNC machines take projects to a whole different level. I haven't really looked into the cost of them, but i such a idiot with computers (yes, I'm a bit older) I have doubts I could ever get the graphics/design part of it down well enough to actually make something cool with it. Awesome boards though !
Hell yeah that's cool! Nice job! You might end up a very busy man, making these.
@oxintheshop
6 жыл бұрын
Paul Granger that and yea idk about being busy because the price of these are a little crazy for corn hole boards
@GEORGIAOUTLAW317
6 жыл бұрын
Ox In The Shop what would be the price for these?
Turned out great man!
@oxintheshop
6 жыл бұрын
thanks and thanks for watching
Awesome on so many levels! GO DAWGS
@oxintheshop
6 жыл бұрын
thanks so much Ross and yes GOOOOO DAWGSSS!!!!!
@brgarrison418
4 жыл бұрын
I Agree ........ GO DAWGS !!!!!!!!
What a a beautiful set! You could make a nice side business. I would definitely buy a Tennessee set.
@oxintheshop
6 жыл бұрын
Tenn....... im sorry. but yes I do sell them let me know if you want one
@jerrystorm3199
3 жыл бұрын
@@oxintheshop how much do you sell them for? Thx
Turned out great dude!!
@oxintheshop
6 жыл бұрын
Southern Ginger Workshop thanks Zach
Go dawgs just got you a new subscriber!!!
@oxintheshop
5 жыл бұрын
Thanks Alexander glad to have you🐶
nice work brother with the cnc work!
@oxintheshop
5 жыл бұрын
Thanks
duuuude those are awesome!! go dawgs!!
@oxintheshop
5 жыл бұрын
Thanks
Nice editing. Love your choice of music. This compliment from 60+ old man.
@oxintheshop
6 жыл бұрын
thanks Dale thats awesome
All the cnc, epoxy stuff and speakers and then plywood legs. Pop for the $8 for solid wood legs.
Hell yea! Nice build! Best part though, eye of the tiger followed by huge miss 😂😂😂
@oxintheshop
4 жыл бұрын
Lol that is a good part thank for watching
Immediate subscribe! Great channel, man!
@oxintheshop
6 жыл бұрын
thank you thats awesome
That is really, really cool.
@oxintheshop
6 жыл бұрын
thanks
Congratulation for your beautiful job
@oxintheshop
6 жыл бұрын
thanks for the comment and for watching
Those boards are sick! YOU took that to "anubba lebbal "!
@oxintheshop
6 жыл бұрын
haha no sure what that means exactly but thanks
Where did you find that sensor for the music. Thats an amazing touch.
Outstanding.
@oxintheshop
5 жыл бұрын
Thanks glad u like it
Just sent in a request. Looking forward to hearing back!
Looking great man. Just to jump on the impending bandwagon: would have looked better with That epoxy top looks immaculate.
@oxintheshop
6 жыл бұрын
42Fab - Metalworking and Multi-Medium Fabrication thanks Richard yes they turned out awesome
Dude - awesome.
@oxintheshop
3 жыл бұрын
Thanks glad you like it
What sensor was that for the music?
Best cornhole boards EVER! GO DAWGS! ❤️🖤
@oxintheshop
6 жыл бұрын
Kellie Bevans thanks and go dawgs
Do you have the link to where you got the hole sound system?
@oxintheshop
6 жыл бұрын
I do not have it but you can find it or something similar with google search. these were a little tricky to get working right tho.
@billygordon9874
5 жыл бұрын
@@oxintheshop You don't have the link to ware you got the sound system? But you have it and installed it?
very nice looking set of boards. im wondering how you dealt with all the rough edges after the cnc machine finished? i do alot of routing and always struggle with that. thanks
@oxintheshop
6 жыл бұрын
The v bit cleaned everything up pretty good. But for the couple little spot I hit them with 220 just to knock off the bur. where the arches were a little more rough due to the bit not being the sharpest i used a razor to clean it up. Hope this help but when router a good quality bit goes a long way. thanks for the comment and for watching
Nice work
@oxintheshop
6 жыл бұрын
Mike Fulton thanks
That's a nice Green Bay packers board ;)
@oxintheshop
2 жыл бұрын
Lol your funny go dawgs
I didn’t know any Georgia fans had the brain capacity to do something like this. Good to see
That's awesome Cornhole board. Where you get sound box? And was it motion activated when bag went in hole? I'm definitely going have try make a Cornhole board similar to yours. Great job 👍
Any chance you would do a video on how you did the design with your cnc, or share the g code?
@oxintheshop
6 жыл бұрын
yes I could do a video on that
Very nice work Drew. would you please share where you got the speaker and fight song from.
@oxintheshop
7 ай бұрын
So the speaker didn’t work that much so I didn’t post where to get
So sick
great job!,go dawgs!
@oxintheshop
6 жыл бұрын
thanks go dawgs
Awesome boards! Where do you find the motion activated audio box that plays the fight song?
@oxintheshop
6 жыл бұрын
I would not recommend the ones I used because it doesn't work everytime like it should
Nice work..
@oxintheshop
5 жыл бұрын
Thanks CAP!
Where did you get the sound box from? I’d like to get something like that.
where did you get the motion sensor and sound machine? Did not see that listed
Amazing work! Where did you get the sound module? I didn't see the link in the description. Thanks.
@oxintheshop
7 ай бұрын
I can’t remember but it didn’t work that great
Amazing
@oxintheshop
3 жыл бұрын
Thanks mason
Holy pocket holes Batman!!
@oxintheshop
5 жыл бұрын
Lol yup
Great video! What did you use to make the fight don't play? I don't see a link for that- unless I missed it
@oxintheshop
6 жыл бұрын
I used a machine from a tailgating supply website but I would not use it again doesn't work as well as I want it to
Love your videos. Can you tell me what kind of CNC router you have ?
@oxintheshop
3 жыл бұрын
Garageworx cnc
i did a super nice top board with tape and stain, then somehow screwed up on the poly part, i dont know what i did wrong. has swirl marks from sanding it between coats. and legs jacked up, trying to fix that as well
@oxintheshop
4 жыл бұрын
sorry to hear that I hope you got it figured out sorry just now seeing this comment
Is it also possible to purchase the cnc laser/router file?
Glory glory to ol Georgia!!
@oxintheshop
5 жыл бұрын
Go dawgs
What/how did you mix that clear I've built some but can't get that high gloss like that thanks awesome build👏🏽🤙🏽
@oxintheshop
5 жыл бұрын
I just mixed it up like the jugs said and poured it on. I have a link in description where you can buy it
Curious, do you have to have any special licensing agreement with NCAA or SEC, NFL, etc. to resale?? how does that work exactly? I feel like when you buy the decal you've paid your part, but I've also heard the argument when you do resale they still may want a piece of the pie. thanks
These are so cool! What a great idea to use the CNC machine! Just curious though how heavy are these!?
@oxintheshop
4 жыл бұрын
Lol Jen they are not light at all. Not sure on the weight exactly but they are a good bit heavier than the regular boards
How much do you change to build a set? Those are amazing
@oxintheshop
4 жыл бұрын
A lot message on my website if interested they ain’t cheap
Beautiful boards. What did you think of the epoxy finish as far as play is concerned? Some people say it’s too fast and I’m curious what you think
@oxintheshop
4 жыл бұрын
It fast at all. At first it doesn’t slide one bit but after you play and it gets powder from the bags it works great
Still sick! I won’t be doing the same. Damn
@oxintheshop
4 жыл бұрын
Thanks I guess??? Not sure I understand
Nice boards . But you could put handles to carry them but awesome also.
@oxintheshop
4 жыл бұрын
That would be a good idea
Where do you find the cheer sound for when the bag goes in the hole
@oxintheshop
2 жыл бұрын
Can’t remember I think I downloaded it off KZread maybe
What CNC was used in this? I am looking to purchase one for tables around 3 feet
@oxintheshop
5 жыл бұрын
Garageworx cnc
what brand cnc is that??? Awesome job!
@oxintheshop
3 жыл бұрын
Garageworx cnc but I don’t think he makes them anymore
Great job, very professional and creative...except...no eye protection???
Where did you get the speaker? I'd love to add it to my boards
@jodaddyswoodshop331
3 жыл бұрын
????? Any update?? I would love to know what’re you got the sensor!
@alanirizarry118
2 жыл бұрын
Ditto would love to know where to get sensor music box
Is the epoxy to slick when playing? Does the bags slide back down the boards?
@oxintheshop
3 жыл бұрын
Actually not slick enough. You would think it would be but poly is more slick
Where can I find the motion sensor that plays audio?
@oxintheshop
5 жыл бұрын
I just searched for cornhole speaker and found it at a tailgating website but...... it doesn’t work everytime more like 40 percent of the time
May I have info on your engraver? What is the model and specs to fit a 24"x48" board?
@oxintheshop
3 жыл бұрын
Garageworx it is 48x48
Where do you find those types of images to trace in bitmap?
@oxintheshop
5 жыл бұрын
Just found pictures I wanted on google and put them all together. This was not a image I found all in one. It was in my head
Go Dawgs!!
@oxintheshop
3 жыл бұрын
Sic em
How did you clamp cow hole boards down on CNC?
@oxintheshop
4 жыл бұрын
With wedges
Where did you get the University Pic? What type of file format is it?
@oxintheshop
6 жыл бұрын
it was just a regular google image jpeg that would put on the cnc program and then edited so that the cnc could cut it out.
Hey man! I’m in Atlanta too. How much would a set just like this cost? I’d love to make a set but I don’t have the space or the cnc machine lol. Gooooo dawgs!
@oxintheshop
5 жыл бұрын
Send me an email oxintheshop@gmail.com
Do u still do cornhole boards? Would like to c how much u would charge to make me a set!
Nice
@oxintheshop
6 жыл бұрын
thanks David
Go Dawgs!
@oxintheshop
6 жыл бұрын
SIC EM!!!!!
Hey what was that engraver called. I want to get me one
@oxintheshop
5 жыл бұрын
Garageworx cnc
Did I miss the CNC machine in the tool section ?
@oxintheshop
6 жыл бұрын
it is a garageworx 4ft by 4ft machine
How bout them Dawgs!?!?!?!Super sweet build!!! Love the "Glory to Old Georgia" feature. Go Dawgs!!!
@oxintheshop
6 жыл бұрын
thanks Jacob graded you like the build
Awesome work! How much are you selling these for?
@oxintheshop
5 жыл бұрын
Message me thru my website
Where did you get the speaker that plays the fight song?? That’s awesome!
@oxintheshop
4 жыл бұрын
From an online tailgating website that I had to record the sound too. But I wouldn’t use it again big it didn’t work well and took a while to get the sounds to work for the video
@waynekraemer244
4 жыл бұрын
Ox In The Shop thanks for the quick reply and honesty, great video!