DIY Sliding Barn Door Console
Тәжірибелік нұсқаулар және стиль
We found AMAZING hardware for $40 and had to build something for it! Come check out this DIY Sliding Barn Door Console! We built the whole thing for around $200 in hardware and lumber!
You can find the $40 hardware here! rstyle.me/n/cubi72xv6w
You can find the cute metal pull here! rstyle.me/n/cubjfaxv6w
Free Printable Plans: www.shanty-2-chic.com/2017/11/...
Glu-Bot - BEST glue bottle ever! Link here - rstyle.me/n/ctsxp3xv6w
DIY Floating Shelves: bit.ly/29qZ449
DIY Thanksgiving Table: bit.ly/2dshHEn
DIY Wood Bench: bit.ly/2bYRUHV
Our Favorite Tools: bit.ly/29t0fgm
--
Facebook: / shanty2chic
Twitter: / shanty2chic
Pinterest: / shanty2chic
Instagram: / shanty2chic
Blog: www.shanty-2-chic.com/
Пікірлер: 63
Love the videos, outtakes are a riot! Oh and the projects are great too! 😊
Love this unique idea. Very cool. Great job.
I thought you were going to say... "Roll that bean footage"... too cute!
Yessssss! Finally! I was hoping you would do something like this. Everyone else gives such confusing instructions... thank youuuuuuu you girls are awesome
@shanty2chic
6 жыл бұрын
Yeah! We love hearing that! Thank you!!!
I would love this as a bathroom vanity! I have 54 inches long and 16 inches deep single sink in center 💕 the door hides the plumbing yet easy access and baskets hide the stuff👍
“Shut the Barn Door” 🤣 Love the console table!! 😍
You girls rock. Where can we find those baskets? Please and thank you.
Yall are hilarious and so talented! Love this project, and loved the fun editing 💕
@shanty2chic
6 жыл бұрын
Thank you Mallory! We appreciate your kind words :-)
You two Rock !!! love the projects you post, sadly up here in Canada the hardware alone is $150.......still going to make it though :)
looooooooooooveee it. i have a bar outside that is too narrow to open. this idea kills!!!. Love you ladies!!!
@shanty2chic
6 жыл бұрын
Yeah! What a fun place to put it!
Where did you get the baskets? They fit perfectly. Great job on the build!
Wow you girls rock & roll. Fantastic job as always 👍😁😉😍🌹😘
@shanty2chic
6 жыл бұрын
Thank you Lukas!! :-)
Making this now. Your awesome. Question, where might we find the baskets?
I’m new subscriber and I’m so obsessed with your channel I just bought my first set of power tools and I’m following your workbench plans as my first project! Then going to invest in the peg board you recommend
@mulekickhandmadeguitars8465
4 жыл бұрын
You're going to have a lot of fun, and you'll be pretty surprised at how many cool things you can build with only some basic power tools, and hand tools. Also, don't be shy about building things to sell. Woodworking is a hobby that, not only pays for itself, but can be pretty profitable. Most importantly, HAVE FUN!
@stephaniemzapata
4 жыл бұрын
This was so long ago I’ve done so many projects since and have so many tools now very addicting
When this door slides what keeps the door from swinging inward? The door would swing in and out a bit right?
Did Ryobi build that #shanty cooler near the fridge, or is it just perfectly matched? Nice build.
Thanks for sharing!! Great project! What time of nails did you use on trim and frames? Are they Brad nails o finish's nails? Where I can find info on the Ryobi you are using?. Thanks again
I could change the dimensions of this (aside from the width) and still use the same hardware right? I think I want it taller and deeper! About the same size as your locker cabinet!
Help please! I’m building this today and wanted to see if y’all used plywood for the top too?
I️ have to ask... could you post the link to those cute lights?? I’ve looked everywhere for them and can’t seem to find them!
How long of flat bar did y'all use 6 ft or 6'6"
Where can we find the baskets?
I was thinking of modifying this a little bit (two sliding doors instead of one) and using it in a bathroom for a double vanity. Do you think its sturdy enough for that?
Just watched this my daughter. We loved it.
@shanty2chic
6 жыл бұрын
Awww thanks! Starting her young... Good mama!
@3x3CustomTamar
6 жыл бұрын
Shanty2Chic she loves “helping” me in the shop. It’s great for her to see other women out there doing what we do
How difficult would it be to make this console a bit deeper? Like 18 inches deep?
Do you have the link to the hanging wall lamp?
Would this hold up a tv
I've tried pulling up the plans for the barn door console but get a blank page every time. Any suggestions? BTW, since I found you ladies I cannot stop watching you....so cute, great personalities and very talented. Now I need to hire a housekeeper because all I want to do it watch you!!!
Thanks for sharing¡ the since the front frame is 2inches and boards 3/4 of an inch, is it flashed to the inside or frame Just in the middle of the board?. Thanks
How much weight do you think it would hold?
Did you add a support under the bottom panel? It seemed to bow a bit as you were attaching the separations in the middle? I want to build something like this but that had me wondering...
Do you think this would this support a 70" tv's weight?
😂😂😂😂😂 you ladies are hilarious!!!! What a cute piece
@shanty2chic
6 жыл бұрын
Thank you Janna! We love to laugh at ourselves, so we are happy you liked it :-)!
@jannasawaya9221
6 жыл бұрын
Shanty2Chic Do you have any tips how to put a sliding barn door on a 8 cube organizer. Thank you
Prolly a silly question but you think they are using a 18 gauge Brad nailer?
LOL!!!!! Cool project ladies:-)
@shanty2chic
6 жыл бұрын
Thank you!!!
Is there an instruction video for the barn door hardware? I finished the console today and I have ABSOLUTELY NO IDEA HOW TO INSTALL THIS HARDWARE lol. HELP!! Ps. Thanks so much for the free plans :)
@chelsgrubb5287
6 жыл бұрын
@shanty2chic
@allyranches
5 жыл бұрын
Agree. @shanty2chic do you have the instructions and a video on how to install the barn door hardware? What is the distance of the bottom of the console to the bottom of the bar? Is there a gap between the bottom of the bar and the top of the door? If so, how much? How far in did you place the rhombus? How did you keep the door from swaying in and out?
Where did you get the baskets? Also, we are about to build this and I read one of the comments saying the plans are wrong and the pocket holes are in the wrong place. Is this accurate? Thx!
@sandyantor
3 жыл бұрын
Deni, did you find out where baskets are from?
What paint colors did ya'll go with?
@shanty2chic
6 жыл бұрын
The console is painted with Software by Sherwin-Williams and the stain is Briarsmoke by Varathane
Is there a link to buy that hardware?
@shanty2chic
6 жыл бұрын
Yes! I linked above, but here it is again... You can find the $40 hardware here! rstyle.me/n/cubi72xv6w
How much weight can this hold. Would love to put a tv on it!!!
@shanty2chic
6 жыл бұрын
It will easily support that!
So when you say a nail gun. Is that a finishing or a brad? Or do I need 2 nail guns? Lol
there's something about those eyelashes...
@shanty2chic
6 жыл бұрын
Hahahaha
@zinopower4430
6 жыл бұрын
they are fake, but still lovely!
Build in 2h 😂 lol. I guess if we don't sand it, don't finish it, don't need panels to be squared, don't need shelves to be equally spaced, etc...yeah 2h